Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase boundary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Electrochemical Performance and Stability of the Cathode for Solid Oxide Fuel Cells: III. Role of volatile boron species on LSM/YSZ and LSCF

Boron oxide is a key component to tailor the softening temperature and viscosity of the sealing glass for solid oxide fuel cells. The primary concern regarding the use of boron containing sealing glasses is the volatility of boron species, which possibly results in cathode degradation. In this paper, we report the role of volatile boron species on the electrochemical performance of LSM/YSZ and LSCF cathodes at various SOFC operation temperatures. The transport rate of boron, ~ 3.24×10-12 g/cm2•sec was measured at 750°C with air saturated with 2.8% moisture. A reduction in power density was observed in cells with LSM/YSZ cathodes after introduction of the boron source to the cathode air stream. Partial recovery of the power density was observed after the boron source was removed. Results from post-test secondary ion mass spectroscopy (SIMS) analysis the partial recovery in power density correlated with partil removal of the deposited boron by the clean air stream. The presence of boron was also observed in LSCF cathodes by SIMS analysis, however the effect of boron on the electrochemical performance of LSCF cathode was negligible. Coverage of triple phase boundaries in LSM/YSZ was postulated as the cause for the observed reduction in electrochemical performance.

30 DIRECT ENERGY CONVERSION↗

Polarization Resistance of La0.85Ca0.15MnO3 Cathodes for Solid Oxide Fuel Cells (SOFCs) Measured Using Patterned Electrodes

Patterned cathodes of calcium-doped lanthanum manganite (LCM) were fabricated on polycrystalline yttria-stabilized zirconia (YSZ) substrates by RF magnetron sputtering and photolithographic techniques. Samples were generated with a constant electrode/electrolyte contact area but different three phase boundary (TPB) lengths (lTPB's). Electrochemical impedance spectroscopy (EIS) was performed in the oxygen partial pressure (pO2) and temperature range of 10-3 atm to 1.00 atm and 600-800 C respectively. The area specific polarization resistance, Rp, was found to scale linearly with the inverse of lTPB, suggesting that the TPB is the active region for oxygen reduction. The resistivity decreased with increased temperature and pO2 and showed an activation energy of 1.17 +/- 0.03 eV.

(SOFCs)↗

Quantitative Characterization of the Microstructure-Property Relationships in Ni and MIEC Nanocatalyst-Infiltrated Ni/YSZ Anodes

The performance of solid oxide fuel cell (SOFC) anodes can be improved by infiltration of nanoscale electrocatalysts, which increases triple phase boundary (TPB) density, but only when the added TPBs are active. Quantitative characterization of the microstructure of infiltrated nanocatalysts remains a critical challenge in understanding their role in improved performance. This paper explores the relationship between electrochemical performance and microstructure for Ni/YSZ anodes infiltrated with Ni, gadolinium-doped-ceria (GDC), and Ni/GDC nanocatalysts using a combination of electrochemical impedance spectroscopy (EIS), distribution of relaxation times (DRT) analysis, scanning electron microscopy (SEM) microstructural characterization, and three-dimensional (3-D) anode reconstruction. Estimated polarization resistance improvements as a result of nickel nanoparticle infiltration are discussed.

Rix, Jillian↗

Mechanistic Insights into Oxygen Reduction Reaction on Metal Cathode Over BaZrO 3 -Based Electrolyte under Moist Atmosphere: Interfacial Interactions and Reaction Pathways

The oxygen reduction reaction (ORR) is a critical process that often governs the overall performance of electrochemical systems such as proton conducting solid oxide fuel cells. Despite its significance, the current understanding about the ORR, especially when it involves H 2 O is still limited. In this study, the proton involved ORR (PI-ORR) on metal cathode (e.g., Pt) over BaZrO 3 (BZO) electrolyte is investigated using density functional theory (DFT) under moist atmosphere. Two scenarios are considered: one at relatively high temperature (900 K) in the presence of oxygen vacancy in BZO substrate and one at relatively low temperature (700 K) without oxygen vacancy. We systematically explored oxygen vacancy effects on adsorption sites and proton transfer pathways, calculated energy profiles and Gibbs free energies for elementary steps along the O 2 dissociated and the O 2 concerted reaction pathways. We also evaluated H 2 O impacts on intermediate oxygen species (*O and *OH) through Ab Initio molecular dynamics. These analyses revealed pathway-dependent reaction mechanisms and hydration effects at triple-phase boundary, advancing fundamental understanding of PI-ORR in metal cathode/Ba-based electrolyte systems for energy applications.

08 - HYDROGEN↗

Sandia Equation of State Model Library

The software provides a general interface for querying thermodynamic states of material models along with implementation of both general and specific equation of state models. In particular, models are provided for the IAPWS-IF97 and IAPWS95 water standards as well as the associated water standards for viscosity, thermal conductivity, and surface tension. The interface supports implementation of models in a variety of independent variable spaces. Also, model support routines are included that allow for coupling of models and determination and representation of phase boundaries.

Carpenter, JohnH.↗

Disorder-induced magnetoelastic behaviors of MnTexSbyBi1-x-y alloys

This dataset contains input and output files from density functional theory (DFT) simulations used to study the disorder-induced magnetoelastic behaviors of MnTexSbyBi1-x-y (0 ≤ x + y ≤ 1) alloys and their binary end members MnTe, MnSb, and MnBi. The alloys adopt the hexagonal NiAs-type (nickeline) structure and span ternary (MnTexSb1-x, MnTexBi1-x, MnBixSb1-x), and quaternary compositions across the full MnTe–MnSb–MnBi composition triangle. For each alloy composition, the dataset provides DFT calculations in three magnetic configurations: A-type antiferromagnetic (AFM), C-type AFM, and ferromagnetic (FM). Every magnetic configuration folder contains the fully relaxed crystal structure (CONTCAR), VASP input parameters (INCAR), and the main VASP output file (OUTCAR), from which total electronic energies, Mn magnetic moments, lattice parameters, and percent volume changes between magnetic states are extracted. These data are used to construct compositional phase diagrams, evaluate thermodynamic stability (formability), and map magnetoelastic responses across the alloy space. For A-type AFM and FM configurations, additional data are provided as follows: (i) FORCE_CONSTANTS and thermal_properties.yaml files at the top level of A-type_AFM/ and FM/ folders — present only for compositions marked with an asterisk (*) in Table I of the main text. These are derived from Phonopy finite-displacement calculations on full disordered 128-atom supercells and provide vibrational free energy, entropy (Svib)contribution from explicit disorder calculations. (Table I of the associated main manuscript) (ii) A VCA/ subfolder within A-type_AFM/ and FM/, containing FORCE_CONSTANTS and thermal_properties.yaml from Virtual Crystal Approximation phonon calculations (without spin-orbit coupling). VCA data are available for all compositions and are used to estimate vibrational contributions to the Gibbs free energy across the full composition space. (iii) A SOC/ subfolder containing CONTCAR, INCAR, and OUTCAR from spin-orbit coupling calculations, providing relativistic corrections to electronic energies and lattice parameters (Tables S2–S3 of the SM, and Table I of the main manuscript). (iv) A SOC/VCA/ subfolder containing FORCE_CONSTANTS and thermal_properties.yaml from VCA phonon calculations performed within the SOC framework, combining relativistic and vibrational thermodynamic corrections. The computed properties are used to map the AFM–FM magnetic crossover near MnTe0.75Sb0.25, demonstrate disorder- and spin-induced phonon broadening, identify a semiconductor-to-metal crossover, and quantify the pronounced magnetoelastic volume response near the magnetic phase boundary.

36 MATERIALS SCIENCE↗

Atomic-level mechanisms of short-circuit diffusion in materials

This paper reviews the recent progress in understanding the atomic mechanisms of short-circuit diffusion along materials interfaces, such as grain and interphase boundaries, as well as lattice and interfacial dislocations/disconnections. Recent atomistic computer simulations have shown that short-circuit diffusion is dominated by collective atomic rearrangements in the form of strings and rings of mobile atoms. The process is dynamically heterogeneous in space and time and has many features in common with atomic dynamics in supercooled glass-forming liquids. We discuss examples of grain boundary, interphase boundary, and dislocation diffusion in metals and alloys, including the solute effect on the diffusion rates and mechanisms. Interphase boundaries are exemplified by Al–Si interfaces with diverse orientation relationships and atomic structures. The hierarchy of short-circuit diffusion paths in materials is reviewed by comparing the rates of grain boundary, interphase boundary, and dislocation diffusion. Future directions in the field of short-circuit diffusion in defect core regions are discussed.

36 MATERIALS SCIENCE↗

Structure and temperature-dependent phase transitions of lead-free Bi 1/2 Na 1/2 TiO 3 -Bi 1/2 K 1/2 TiO 3 -K 0.5 Na 0.5 NbO 3 piezoceramics

Structure and phase transitions of (1-y)((1-x)Bi 1/2 Na 1/2 TiO 3 -xBi 1/2 K 1/2 TiO 3 )-yK 0.5 Na 0.5 NbO 3 (x; y) piezoceramics (0.1 ≤ x ≤ 0.4; 0 ≤ y ≤ 0.05) were investigated by transmission electron microscopy, neutron diffraction, temperature-dependent x-ray diffraction, and Raman spectroscopy. The local crystallographic structure at room temperature (RT) does not change by adding K 0.5 Na 0.5 NbO 3 to Bi 1/2 Na 1/2 TiO 3 -xBi 1/2 K 1/2 TiO 3 for x = 0.2 and 0.4. The average crystal structure and microstructure on the other hand develop from mainly long-range polar order with ferroelectric domains to short-range order with polar nanoregions displaying a more pronounced relaxor character. The (0.1; 0) and (0.1; 0.02) compositions exhibit monoclinic Cc space group symmetry, which transform into Cc + P4bm at 185 and 130 °C, respectively. This high temperature phase is stable at RT for the morphotropic phase boundary compositions of (0.1; 0.05) and all compositions with x = 0.2. For the compositions of (0.1; 0) and (0.1; 0.02), local structural changes on heating are evidenced by Raman; for all other compositions, changes in the long-range average crystal structure were observed.

36 MATERIALS SCIENCE↗

A Distributed Electrochemistry Modeling Tool for Simulating SOFC Performance and Degradation

This report presents a distributed electrochemistry (DEC) model capable of investigating the electrochemistry and local conditions with the SOFC MEA based on the local microstructure and multi-physics. The DEC model can calculate the global current-voltage (I-V) performance of the cell as determined by the spatially varying local conditions through the thickness of the electrodes and electrolyte. The simulation tool is able to investigate the electrochemical performance based on characteristics of the electrode microstructure, such as particle size, pore size, electrolyte and electrode phase volume fractions, and triple-phase-boundary length. It can also investigate performance as affected by fuel and oxidant gas flow distributions and other environmental/experimental conditions such as temperature and fuel gas composition. The long-term objective for the DEC modeling tool is to investigate factors that cause electrode degradation and the decay of SOFC performance which decrease longevity.

30 DIRECT ENERGY CONVERSION↗

Methane Recovery from Hydrate-bearing Sediments

Gas hydrates are crystalline compounds made of gas and water molecules. Methane hydrates are found in marine sediments and permafrost regions; extensive amounts of methane are trapped in the form of hydrates. Methane hydrate can be an energy resource, contribute to global warming, or cause seafloor instability. This study placed emphasis on gas recovery from hydrate bearing sediments and related phenomena. The unique behavior of hydrate-bearing sediments required the development of special research tools, including new numerical algorithms (tube- and pore-network models) and experimental devices (high pressure chambers and micromodels). Therefore, the research methodology combined experimental studies, particle-scale numerical simulations, and macro-scale analyses of coupled processes. Research conducted as part of this project started with hydrate formation in sediment pores and extended to production methods and emergent phenomena. In particular, the scope of the work addressed: (1) hydrate formation and growth in pores, the assessment of formation rate, tensile/adhesive strength and their impact on sediment-scale properties, including volume change during hydrate formation and dissociation; (2) the effect of physical properties such as gas solubility, salinity, pore size, and mixed gas conditions on hydrate formation and dissociation, and it implications such as oscillatory transient hydrate formation, dissolution within the hydrate stability field, initial hydrate lens formation, and phase boundary changes in real field situations; (3) fluid conductivity in relation to pore size distribution and spatial correlation and the emergence of phenomena such as flow focusing; (4) mixed fluid flow, with special emphasis on differences between invading gas and nucleating gas, implications on relative gas conductivity for reservoir simulations, and gas recovery efficiency; (5) identification of advantages and limitations in different gas production strategies with emphasis; (6) detailed study of CH4-CO2 exchange as a unique alternative to recover CH4 gas while sequestering CO2; (7) the relevance of fines in otherwise clean sand sediments on gas recovery and related phenomena such as fines migration and clogging, vuggy structure formation, and gas-driven fracture formation during gas production by depressurization.

03 NATURAL GAS↗

Leak Detection and H 2 Sensor Development

Low-cost, durable, and reliable Hydrogen safety sensor for vehicle, stationary, and infrastructure applications. A new zirconia, electrochemical-based sensor technology is being transitioned out of the laboratory and into an advanced testing phase for vehicular and stationary H 2 safety applications. Mixed potential sensors are a class of electrochemical devices that develop an open-circuit electromotive force due to the difference in the kinetics of the redox reactions of various gaseous species at each electrode/electrolyte/gas interface, referred to as the triple phase boundary (TPB). Therefore, these sensors have been considered for the sensing of various reducible or oxidizable gas species in the presence of oxygen. Based on this principle, a unique sensor design was developed by LANL and LLNL. The uniqueness of this sensor derives from minimizing heterogeneous catalysis (detrimental to sensor response) by avoiding gas diffusion through a catalytically active material and minimizing diffusion path to the TPB. Unlike the conventional design of these devices that use a dense solid electrolyte and porous thin film electrodes (similar to the current state-of-the-art zirconia-based sensors and fuel cells), the design of this sensor uses dense electrodes and porous electrolytes. Such a sensor design facilitates a stable and reproducible device response, since dense electrode morphologies are easy to reproduce and are significantly more stable than the conventional porous morphologies. Moreover, these sensors develop higher mixed potentials since the gas diffusion is through the less catalytically active electrolyte than the electrode. Lastly, the choice of electrodes is primarily based on their O2 reduction kinetics and catalytic properties vis-a-vis the target gas of interest.

08 HYDROGEN↗

Heavy fermions, quantum criticality, and unconventional superconductivity in filled skutterudites and related materials

The main goal of this program was to explore the possibility of novel states and behaviors in Pr-based system exhibiting quantum critical behavior, PrOs₄Sb₁₂. Upon small changes of external parameter, such as magnetic field, physical properties of PrOs₄Sb₁₂ are drastically altered from those corresponding to a superconductor, to heavy fermion, to field-induced ordered phase with primary quadrupolar order parameter. All these states are highly unconventional and not understood in terms of current theories thus offer an opportunity to expand our knowledge and understanding of condensed matter. At the same time, these novel states and behaviors are subjects to intense international controversies. In particular, two superconducting phases with different transition temperatures were observed in some samples and not observed in others leading to speculations that sample defects might be partially responsible for these exotic behaviors. This work clearly established that crystal disorder is important consideration, but contrary to current consensus this disorder suppresses exotic behavior. Superconducting properties imply unconventional inhomogeneous state that emerges from unconventional homogeneous normal state. Comprehensive structural investigations demonstrated that upper superconducting transition is intrinsic, bulk, and unconventional. The high quality of in-house synthesized single crystals was indirectly confirmed by de Haas-van Alphen quantum oscillation measurements. These measurements, for the first time ever reported, spanned several different phases, offering unprecedented possibility of studying quantum oscillations across phase boundaries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Computational Design of Creep-Resistant Alloys and Experimental Validation in Ferritic Superalloys

A new class of ferritic superalloys containing B2-type zones inside parent L21-type precipitates in a disordered solid-solution matrix, also known as a hierarchical-precipitate strengthened ferritic alloy (HPSFA), has been developed for high-temperature structural applications in fossil-energy power plants. These alloys were designed by the addition of the Ti element into a previously-studied NiAl-strengthened ferritic alloy (denoted as FBB8 in this study). In the present research, systematic investigations, including advanced experimental techniques, first-principles calculations, and numerical simulations, have been integrated and conducted to characterize the complex microstructures and excellent creep resistance of HPSFAs. The experimental techniques include transmission-electron microscopy, scanningtransmission- electron microscopy, neutron diffraction, and atom-probe tomography, which provide detailed microstructural information of HPSFAs. Systematic tension/compression creep tests revealed that HPSFAs exhibit the superior creep resistance, compared with the FBB8 and conventional ferritic steels (i.e., the creep rates of HPSFAs are about 4 orders of magnitude slower than the FBB8 and conventional ferritic steels.) First-principles calculations include interfacial free energies, anti-phase boundary (APB) free energies, elastic constants, and impurity diffusivities in Fe. Combined with kinetic Monte- Carlo simulations of interdiffusion coefficients, and the integration of computational thermodynamics and kinetics, these calculations provide great understanding of thermodynamic and mechanical properties of HPSFAs. In addition to the systematic experimental approach and first-principles calculations, a series of numerical tools and algorithms, which assist in the optimization of creep properties of ferritic superalloys, are utilized and developed. These numerical simulation results are compared with the available experimental data and previous first-principles calculations, providing deep insight of creep mechanisms of the creep-resistant ferritic superalloys. With the above investigations, the HPSFA has been proved with superior creep resistance, and its microstructure, creep mechanism, and thermal/mechanical properties have been well studied and understood. In the future, HPSFAs with different additions and sizes of precipitates will be investigated and developed to further enhance the creep resistance of the ferritic superalloys and provide promising applications of the fossil-energy power plants.

Liaw, Peter↗

Kelvin Probe Force Microscopy for High-Resolution Imaging of Hydrogen in Steel and Aluminum Alloys (Q3 Progress Report)

SRNL is working with Sandia NL, Pacific Northwest NL and Oak Ridge NL in the H-Mat consortium with the objective of developing materials with a higher resistance to hydrogen attack. Understanding the mechanism of hydrogen interactions in metal alloys is continually a topic of interest for applications which involve the long-term storage of hydrogen. Atomic hydrogen segregates to regions of extended defects, such as grain and phase boundaries, and can cause stress and premature cracking through a process known as hydrogen embrittlement. Advanced microstructural imaging techniques, with minimal sample preparation needs, that are capable of resolving hydrogen segregation at the nanometer scale is needed. Current imaging technologies to aid in understanding the effects of hydrogen in metals involve primarily fractography after mechanical testing. Hydrogen segregated at the surface and particularly at surface defect sites changes the local work function of the material. This can be measured by Kelvin Probe Force Microscopy, KPFM, a variant of atomic force microscopy (AFM). KPFM produces surface potential images and is capable of measuring the local change in work function of surfaces with very high spatial resolution. The spatial resolution of KPFM is optimally ~5 nm, yielding very high hydrogen concentration/microstructure coloration capabilities. By locating the presence of hydrogen and its relationship with extended defects, it may be possible to develop microstructures less susceptible to hydrogen embrittlement. The objective of this effort is to assess the utility of KPFM to determine the H 2 concentration profiles surrounding complex microstructural features in high strength steel and aluminum alloys subjected to high pressure hydrogen exposure.

08 HYDROGEN↗

Thermoelasticity Model for Niobium

Niobium is a polymorphic (multi-phase) material. Its phase diagram contains two experimentally confirmed solid phases, body-centered cubic (bcc) and orthorhombic Pnma, and is shown in Figs. 1 and 2. The bcc–Pnma phase boundary was determined in a recent work that combines experimental study by Errandonea et al. using laser-heated diamond anvil cell (DAC) and the theoretical calculation of the total free energies of both solid structures using the temperature dependent effective potential (TDEP) method which takes into account anharmonic lattice vibrations.

36 MATERIALS SCIENCE↗

Kelvin Probe Force Microscopy for High-Resolution Imaging of Hydrogen in Steel and Aluminum Alloys

SRNL is working with Sandia NL, Pacific Northwest NL and Oak Ridge NL in the H-Mat consortium with the objective of developing materials with a higher resistance to hydrogen attack. Understanding the mechanism of hydrogen interactions in metal alloys is continually a topic of interest for applications which involve the long-term storage of hydrogen. Atomic hydrogen segregates to regions of extended defects, such as grain and phase boundaries, and can cause stress and premature cracking through a process known as hydrogen embrittlement. Advanced microstructural imaging techniques, with minimal sample preparation needs, that are capable of resolving hydrogen segregation at the nanometer scale is needed. Current imaging technologies to aid in understanding the effects of hydrogen in metals involve primarily fractography after mechanical testing. Hydrogen segregated at the surface and particularly at surface defect sites changes the local work function of the material. This can be measured by Kelvin Probe Force Microscopy, KPFM, a variant of atomic force microscopy (AFM). KPFM produces surface potential images and is capable of measuring the local change in work function of surfaces with very high spatial resolution. The spatial resolution of KPFM is optimally ~5 nm, yielding very high hydrogen concentration/microstructure coloration capabilities. By locating the presence of hydrogen and its relationship with extended defects, it may be possible to develop microstructures less susceptible to hydrogen embrittlement. The objective of this effort is to assess the utility of KPFM to determine the H 2 concentration profiles surrounding complex microstructural features in high strength steel and aluminum alloys subjected to high pressure hydrogen exposure.

08 HYDROGEN↗

A multi-scale experimental investigation of flow properties in coarse-grained hydrate reservoirs during production (Final Scientific/Technical Report)

In this project, “A multi-scale experimental investigation of flow properties in coarse-grained hydrate reservoirs during production” we explored the relative permeability and dissipation behavior of hydrate-bearing coarse-grained sediment at the core scale and we observed the formation and dissociation of these materials at the pore scale with micro-CT and Raman experiments. The 3-year project results inform reservoir simulation efforts, critical to determining the viability of the coarse-grained hydrate reservoir as an energy resource. We performed the first 3 phase relative permeability experiments in a hydrate-bearing medium using the steady state method (gas and water flow in the presence of hydrate). Results support a model where water is the most wetting phase, hydrate is the intermediate wetting phase, and gas is the least wetting phase. This model can be used to predict relative permeability of gas and water in the presence of hydrate. We showed that when hydrate dissociates, it does so at a pressure and temperature predicted for fresh water (no salinity) conditions. At the scale of a grid block, reservoir simulation models should assume that hydrate dissociates at the freshwater phase boundary. We observed that the chemistry and the pore habit of methane hydrates change dramatically over the timescales of experiments (hours to weeks). It takes weeks to months for hydrates to evolve from a non-stoichiometric to stoichiometric compound with 3:1 large cage vs small cage occupancy. We documented hydrates forming initially in small clayey silt surfaces but gradually concentrated in large pores in sand-sized sediment.

03 NATURAL GAS↗