Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “paramagnetism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Faraday effect improvement by Dy{sup 3+}-doping of terbium gallium garnet single crystal

Highly transparent Dy{sup 3+}-doped terbium gallium garnet (TGG) single crystal was grown by Czochralski (Cz) method. Phase composition of the crystal was tested by XRD measurements. The distribution coefficient of Dy{sup 3+} in the crystal was obtained. The optical and magneto-optical properties were analyzed in detail, and magnetic properties of the Dy{sup 3+}-TGG crystal were studied. The paramagnetic behavior is observed down to 10 K. The as-grown crystal exhibited high optical transmittance, particularly in the visible region. The Faraday rotation was investigated over visible and near-infrared regions (VIS–NIR) at room temperature. The Verdet constants increase at measured wavelengths and high thermal stability was found in Dy{sup 3+}-doped TGG, as compared to the properties of pure TGG, indicating that Dy{sup 3+}-doped crystals are preferable for magneto-active materials used in Faraday devices at VIS–NIR wavelengths. - Graphical abstract: Highly transparent Dy{sup 3+}-doped terbium gallium garnet (TGG) and pure TGG single crystals were grown by Czochralski method. The Dy{sup 3+}-doped TGG possesses 20–30% higher Verdet values in reference to TGG independently on wavelength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, magnetic, magneto-caloric and Mössbauer spectral study of Tb{sub 2}Fe{sub 17} compound synthesized by arc melting

We have synthesized the intermetallic Tb{sub 2}Fe{sub 17} compound in hexagonal crystal structure by arc-melting without annealing. X-ray diffraction pattern has been refined by Rietveld method. The crystal structure is hexagonal with P6{sub 3}/mmc space group (Th{sub 2}Ni{sub 17}-type). The Mössbauer spectrum of Tb{sub 2}Fe{sub 17} compound has been analyzed with seven magnetic sextets assigned to the inequivalent crystallographic sites. The temperature dependence of magnetization data revealed that Tb{sub 2}Fe{sub 17} exhibits a second-order ferromagnetic to paramagnetic phase transition in the vicinity of Curie temperature (T{sub C}=412 K). The relative cooling power around the magnetic transition and the Arrott plots are also reported. - Graphical abstract: A 3D surface showing the temperature and applied magnetic field dependencies of the magnetization for Tb{sub 2}Fe{sub 17} compound (left). Rietveld analysis of the XRD pattern (right). Crystal structure for the hexagonal P6{sub 3}/mmc Tb{sub 2}Fe{sub 17} (bottom). Display Omitted - Highlights: • Tb{sub 2}Fe{sub 17} single-phase synthesized by simple arc-melting without any heat treatment. • The crystal structure is hexagonal with P6{sub 3}/mmc space group. • The magnetic entropy change of the sample was determined by Maxwell relation. • Hyperfine parameters, magnetic and magnetocaloric properties were studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic remanence in Yb{sub 14−x}RE{sub x}MnSb{sub 11} (RE=Tb, Dy, Ho) single crystals

Single crystals of Yb{sub 14−x}RE{sub x}MnSb{sub 11} (x~0.1, 0.4; RE = Tb, Dy, Ho) have been prepared as a solid solution by Sn flux reactions of the elements. They crystallize in the Ca{sub 14}AlSb{sub 11} structure type in the I4{sub 1}/acd space group. The RE{sup 3+}preferentially substitutes on the Yb(1) site which is the smallest volume Yb containing polyhedron. In the case of Ho{sup 3+}, a small amount of Ho{sup 3+} also substitutes on the Yb(4) site. The ferromagnetic ordering temperature of Yb{sub 14}MnSb{sub 11} is reduced from 53 K to 41 K as x increases and dependent on the identity of the RE. This is attributed to the reduction in carriers and reduced screening of the Mn{sup 2+} local moment. The effective moments, μ{sub eff,} agree well with the calculated moments assuming the RE substitutes as a trivalent cation. The largest coercive field is observed for RE = Dy (1000 Oe). For the maximum x of Yb{sub 14−x}RE{sub x}MnSb{sub 11} there are enough carriers for the Ruderman-Kittel-Kasuya-Yosida (RKKY) mechanism of magnetic coupling via conduction electrons to still be valid in describing the ferromagnetic ordering. - Graphical abstract: Field dependent susceptibility loops revealed magnetic remanence in these materials, which has not been previously observed in Yb{sub 14}MnSb{sub 11} compounds. The coercive field increases with the strength of the paramagnetic moment for the substituting rare earth and the amount of the rare earth that is substituted. Display Omitted - Highlights: • Yb{sub 14−x}RE{sub x}MnSb{sub 11} (RE=Tb, Dy, & Ho) were synthesized with x~0.2 and x~0.4. • Tb, Dy, & Ho preferentially substitute on the Yb(1) site. • Samples with the largest x and largest RE moment have the largest coercive field. • There is a split between zero field cooled and field cooled susceptibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Layered vanadyl (IV) nitroprusside: Magnetic interaction through a network of hydrogen bonds

The hydrogen bond and π-π stacking are two non-covalent interactions able to support cooperative magnetic ordering between paramagnetic centers. This contribution reports the crystal structure and related magnetic properties for VO[Fe(CN){sub 5}NO]·2H{sub 2}O, which has a layered structure. This solid crystallizes with an orthorhombic unit cell, in the Pna2{sub 1} space group, with cell parameters a=14.1804(2), b=10.4935(1), c=7.1722(8) Å and four molecules per unit cell (Z=4). Its crystal structure was solved and refined from powder X-ray diffraction data. Neighboring layers remain linked through a network of hydrogen bonds involving a water molecule coordinated to the axial position for the V atom and the unbridged axial NO and CN ligands. An uncoordinated water molecule is found forming a triple bridge between these last two ligands and the coordinated water molecule. The magnetic measurements, recorded down to 2 K, shows a ferromagnetic interaction between V atoms located at neighboring layers, with a Curie-Weiss constant of 3.14 K. Such ferromagnetic behavior was interpreted as resulting from a superexchange interaction through the network of strong OH····O{sub H2O}, OH····N{sub CN}, and OH····O{sub NO} hydrogen bonds that connects neighboring layers. The interaction within the layer must be of antiferromagnetic nature and it was detected close to 2 K. - Graphical abstract: Coordination environment for the metals in vanadyl (II) nitroprusside dihydrate. Display Omitted - Highlights: • Crystal structure of vanadyl nitroprusside dehydrate. • Network of hydrogen bonds. • Magnetic interactions through a network of hydrogen bonds. • Layered transition metal nitroprussides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single crystal growth and characterization of Na{sub x}Ln{sub 1−x}MoO{sub 4}, Ln=La, Ce, Pr, Nd, Sm, and Eu (x=0.397–0.499)

Single crystals of La{sub 0.516(3)}Na{sub 0.484(3)}MoO{sub 4}, Ce{sub 0.512(2)}Na{sub 0.488(2)}MoO{sub 4}, Pr{sub 0.502(2)}Na{sub 0.498(2)}MoO{sub 4,} Nd{sub 0.501(2)}Na{sub 0.499(2)}MoO{sub 4}, Sm{sub 0.509(2)}Na{sub 0.491(2)}MoO{sub 4}, and Eu{sub 0.603(2)}Na{sub 0.397(2)}MoO{sub 4} were grown for the first time out of an alkali metal halide eutectic flux. All compounds crystallize in the tetragonal space group I4{sub 1}/a. UV/Vis measurements show the presence of an absorption edge for all compounds except Eu{sub 0.603(2)}Na{sub 0.397(2)}MoO{sub 4}. The temperature dependence of the magnetic susceptibility was measured for all compounds and found to be paramagnetic across the entire 2–300 K temperature range measured. - Graphical abstract: Single crystals of La{sub 0.516(3)}Na{sub 0.484(3)}MoO{sub 4}, Ce{sub 0.512(2)}Na{sub 0.488(2)}MoO{sub 4}, Pr{sub 0.502(2)}Na{sub 0.498(2)}MoO{sub 4,} Nd{sub 0.501(2)}Na{sub 0.499(2)}MoO{sub 4}, Sm{sub 0.509(2)}Na{sub 0.491(2)}MoO{sub 4}, and Eu{sub 0.603(2)}Na{sub 0.397(2)}MoO{sub 4} were grown for the first time out of an alkali metal halide eutectic flux. All compounds crystallize in the tetragonal space group I4{sub 1}/a. Eu{sub 0.603(2)}Na{sub 0.397(2)}MoO{sub 4} was found to possess the highest Mo{sup 5+} content at 20.6%. UV/Vis, magnetic susceptibility, and a bond valence sum analysis were performed on all samples. Display Omitted - Highlights: • Six lanthanide sodium molybdates have been synthesized and characterized. • An in situ reduction was carried out using Mo as a metal reducing agent. • UV/Vis and magnetic susceptibility data were collected. • Eu{sub 0.603(2)}Na{sub 0.397(2)}MoO{sub 4} was found to possess the highest Mo{sup 5+} content at 20.6%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and magnetotransport properties of the Y doped A-site deficient double layered manganites La{sub 1.2−x}□{sub 0.2}Y{sub x}Ca{sub 1.6}Mn{sub 2}O{sub 7}

We present structural, magnetic and electrical properties of the polycrystalline A-site-deficient yttrium doped double layered manganites La{sub 1.2−x}□{sub 0.2}Y{sub x}Ca{sub 1.6}Mn{sub 2}O{sub 7} (x=0.2, 0.3 and 0.4) prepared by a solid state reaction method. The samples crystallize in the tetragonal structure with the space group I4/mmm. Doping with Y decreases the cell parameters and causes a decrease of the metal-insulator transition temperature. The same evolution with doping is also seen for the deduced Curie temperature from susceptibility curves which present a clear paramagnetic-ferromagnetic transition. The significant positive intrinsic magnetoresistance, shown in all samples, reaches 85% at 122 K under 7 T for 0.3 doped sample and can be attributed to the suppression of spin fluctuations via aligning the spins under external magnetic field, while the extrinsic one is attributed to the inter-grain spin-polarized tunneling across the grain boundaries. The simulation of the resistivity curves in the entire temperature range show that the percolation model is suitable to fit our results. The applied magnetic field increases the density of states near the Fermi level, which is in accordance with the observed decrease of resistivity. - Graphical abstract: Resistivity and magnetoresistance of La{sub 1.2−x}□{sub 0.2}Y{sub x}Ca{sub 1.6}Mn{sub 2}O{sub 7} (x=0.2, 0.3, 0.4). Solid lines correspond to the fitting results. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and magnetic properties of chromium doped cobalt molybdenum nitrides

Four nanocomposites containing mixed phases of Co{sub 3}Mo{sub 3}N and Co{sub 2}Mo{sub 3}N doped with chromium have been prepared. A linear fit is found for relation between Co{sub 2}Mo{sub 3}N and chromium concentrations. The magnetization in ZFC and FC modes at different temperatures (2–300 K) and in applied magnetic fields (up to 70 kOe) have been investigated. It has been detected that many magnetic characteristics of the studied four nanocomposites correlate not with the chromium concentration but with nanocrystallite sizes. The obtained results were interpreted in terms of magnetic core-shell model of a nanoparticle involving paramagnetic core with two magnetic sublattices and a ferromagnetic shell related to chromium doping. - Highlights: • A new chromium doped mixed Co-Mn-N nanocomposites were synthesized. • Surface ferromagnetism was detected in a wide temperature range. • Core-shell model was applied to explain nanocomposites magnetism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure and magnetic properties of new γ-Ba(CoV{sub 1-x}P{sub x}O{sub 4}){sub 2} x = 0.4–0.5

The phase composition of the system BaCo{sub 2}(VO{sub 4}){sub 2}–Ba(CoPO{sub 4}){sub 2} has been studied. At room temperature two miscibility gaps have been detected, with the formation of substitutional solid solutions Ba(CoV{sub 1-x}P{sub x}O{sub 4}){sub 2} for x = 0.4–0.5 basing on the γ-BCPO structure type. An increase in the vanadium cation concentration leads to the stabilization of the rhombohedral crystal lattice. The crystallographic characteristics of two new phosphate - vanadates Ba(CoV{sub 0.5}P{sub 0.5}O{sub 4}){sub 2} and Ba(CoV{sub 0.6}P{sub 0.4}O{sub 4}){sub 2} isostructural to γ-BCPO have been obtained, their crystal structures have been described, and their magnetic properties have been analyzed. It was shown that in α-BCPO, as distinct from other examined phases, a three-dimensional ferromagnetic ordering characterized by a wide hysteresis loop takes place at low temperatures. The enhanced values of the magnetic moment in the paramagnetic phase BaCo{sub 2}(VO{sub 4}){sub 2} and solid solutions based on γ-BCPO are attributed to the peculiarities of the crystal environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of physical properties of cobalt oxide (Co{sub 3}O{sub 4}) nanocrystals

Cobalt oxide nanocrystals of size 10-15 nm have been prepared by a simple co-precipitation method. The structural investigations have been performed with X-ray diffraction and Transmission Electron Microscopy. Specific surface area of the nanocrystals is 77.5 x 10{sup 4} cm{sup 2}/g which have been calculated by X-ray diffraction data. Optical properties are discussed with UV/visible spectroscopy which shows the multiple band gap energies 2.28 eV (O{sup -II} {yields} Co{sup II}) and 1.57 eV (O{sup -II} {yields} Co{sup III}) which suggest the possibility of degeneracy of the valence band. The magnetic behavior is investigated using Vibrating Sample Magnetometer. The Co{sub 3}O{sub 4} nanocrystals possess paramagnetic character at room temperature.

36 MATERIALS SCIENCE↗

Physical and electrochemical study of cobalt oxide nano- and microparticles

Cobalt oxide nanocrystals of size 17–21 nm were synthesized by a simple reaction between cobalt acetate (II) and dodecylamine. On the other hand, micrometric Co{sub 3}O{sub 4} was prepared using the ceramic method. The structural examination of these materials was performed using powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM and HRTEM). XRD studies showed that the oxides were pure, well-crystallized, spinel cubic phases with a-cell parameter of 0.8049 nm and 0.8069 nm for the nano and micro-oxide, respectively. The average particle size was 19 nm (nano-oxide) and 1250 μm (micro-oxide). Morphological studies carried out by SEM and TEM analyses have shown the presence of octahedral particles in both cases. Bulk and surface properties investigated by X-ray photoelectron spectroscopy (XPS), point zero charge (pzc), FTIR and cyclic voltammetry indicated that there were no significant differences in the composition on both materials. The magnetic behavior of the samples was determined using a vibrating sample magnetometer. The compounds showed paramagnetic character and no coercivity and remanence in all cases. Galvanostatic measurements of electrodes formed with nanocrystals showed better performance than those built with micrometric particles. - Highlights: • Spinel Co{sub 3}O{sub 4} nanoparticles and microparticles with same structure but with different cell parameters, particle size and surface area were synthesized. • Oxide nanoparticles showed better electrochemical behavior than micrometric ones due to area effect.

36 MATERIALS SCIENCE↗

The effect of annealing on the transformation and the microstructure of Mn{sub 1−x}Cr{sub x}CoGe alloys

In this work the effect of different thermal treatments on the transformation behavior of Mn{sub 1−x}Cr{sub x}CoGe alloys, with x = 0.15 and 0.20 has been analyzed. The changes in the transformation temperatures have been studied by differential scanning calorimetry (DSC). The results show that the structural transition temperature depends on the previous annealing. However, under the same heat treatment no significant change is observed on the transformation temperatures when replacing Mn by Cr. The microstructural evolution has been monitored using in-situ X-ray diffraction and transmission electron microscopy. The effect of an applied magnetic field on the transformation has been explored by SQUID magnetometry. Two different magnetic transitions are found: a first order paramagnetic (PM) to ferromagnetic (FM) corresponding to the transformation observed by calorimetry and a re-entrant spin glass to ferromagnetic transition. - Highlights: • The annealing conditions determine the magnetostructural transition. • A laminar microstructure along preferential planes observed by TEM • A RSG to ferromagnetic transition at low temperatures is detected.

36 MATERIALS SCIENCE↗

Characterization of low alloy ferritic steel–Ni base alloy dissimilar metal weld interface by SPM techniques, SEM/EDS, TEM/EDS and SVET

The interface region of welded A508–Alloy 52 M is characterized by scanning probe microscope (SPM) techniques, scanning electron microscopy (SEM)/energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM)/Energy Dispersive Spectroscopy (EDS) and scanning vibrate electrode technique (SVET). The regions along the welded A508–Alloy 52 M interface can be categorized into two types according to their different microstructures. In the type-I interface region, A508 and Alloy 52 M are separated by the fusion boundary, while in the type-II interface region, A508 and Alloy 52 M are separated by a martensite zone. A508, martensite zone and grain boundaries in Alloy 52 M are ferromagnetic while the Alloy 52 M matrix is paramagnetic. The Volta potentials measured by scanning Kelvin probe force microscopy (SKPFM) of A508, martensite zone and Alloy 52 M follow the order: V{sub 52} {sub M} > V{sub A508} > V{sub martensite}. The corrosion behavior of A508–Alloy 52 M interface region is galvanic corrosion, in which Alloy 52 M is cathode while A508 is anode. The martensite dissolves faster than Alloy 52 M, but slower than A508 in the test solution. - Highlights: • The A508–Alloy 52 M interface regions can be categorized into two types. • The chromium depleted region is observed along the Alloy 52 M grain boundary. • The Alloy 52 M grain boundaries which are close to the interface are ferromagnetic. • Martensite zone has lower Volta potential but higher corrosion resistance than A508.

36 MATERIALS SCIENCE↗

Characterization of mechano-thermally synthesized Curie temperature-adjusted La{sub 0.8}Sr{sub 0.2}MnO{sub 3} nanoparticles coated with (3-aminopropyl) triethoxysilane

This research aimed to synthesize nanostructured strontium-doped lanthanum manganite, La{sub 0.8}Sr{sub 0.2}MnO{sub 3} (LSMO), with its Curie temperature (T{sub c}) adjusted to the therapeutic range, through a mechanothermal route. In order to investigate the effect of heat treatment temperature and duration on the resulting crystallite size, morphology, magnetic behavior and Curie temperature, the starting powder mixture was milled in a planetary ball mill before being subsequently heat treated at distinct temperatures for different time lengths. The composition, morphology, and magnetic behavior were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and vibrating sample magnetometer (VSM). In addition, magnetic properties were further investigated using an alternating current (AC) susceptometer and thermo-magnetic analyzer. 20 h of milling produced a crystallite size reduction leading to a decrease in the heat treatment temperature of LSMO synthesis to 800 °C. Moreover, SEM analysis has shown the morphology of a strong agglomeration of fine nanoparticles. HRTEM showed clear lattice fringes of high crystallinity. The mean crystallite and particle size of 20-hour milled sample heat treated at 1100 °C for 10 h are relatively 69 and 100 nm, respectively. The VSM data at room temperature, indicated a paramagnetic behavior for samples heat treated at 800 °C. However, by increasing heat treatment temperature to 1100 °C, LSMO indicates a ferromagnetic behavior with well-adjusted Curie temperature of 320 K, suitable for hyperthermia applications. Also, reentrant spin glass (RSG) behavior has been found in heat treated samples. The particles are coated with (3-aminopropyl) triethoxysilane (APTES) for biocompatibility purposes; Fourier transform infrared spectroscopy (FTIR) and thermo-gravimetric analysis (TGA) are used for further confirmation of APTES coating. - Highlights: • La{sub 0.8}Sr{sub 0.2}MnO{sub 3} nanoparticles were synthesized via a mechanothermal route. • We report a significant reduction in the heat treatment temperature. • The Curie temperature was tuned within the therapeutic range. • The particles were coated with (3-aminopropyl) triethoxysilane for biocompatibility purposes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Role of Eu{sup 2+} on the blue‐green photoluminescence of In{sub 2}O{sub 3}:Eu{sup 2+} nanocrystals

Blue‐green light emitting undoped and europium doped indium oxide nanocrystal were synthesized by simple precipitation method. X-ray diffraction (XRD) pattern confirmed the cubic phase of undoped and europium doped samples. Further, transmission electron microscopy (TEM), scanning electron microscopy (SEM) , energy dispersive analysis of X-rays (EDAX), Fourier transform infra-red (FT-IR), photoluminescence (PL), electron paramagnetic resonance (EPR) studies were performed to characterise the samples. PL analysis of the samples is the core of the present research. It includes excitation, emission and CIE (Commission Internationale de l’e´ clairage) studies of the samples. On doping europium to In{sub 2}O{sub 3} lattice, ln{sup 3+} site is substituted by Eu{sup 2+} thereby increasing the concentration of singly ionized oxygen vacancy and hence blue–green emission from the host is found to increase. Further, this increase in blue–green emission after doping may also be attributed to 4f → 5d transitions of Eu{sup 2+}. However, the blue–green PL emission is found to decrease after an optimum dopant concentration (Eu{sup 2+} = 4%) due to luminescence and size quenching. CIE co-ordinates of the samples are calculated to know colour of light emitted from the samples. It suggests that this blue–green light emitting In{sub 2}O{sub 3}: Eu{sup 2+} nanocrystals may find application in lighting such as in generation of white light. - Highlight: • XRD and TEM study confirms the synthesis of cubic doped and europium doped nanocrystals. • EPR study reveals the doped europium is in + 2 oxidation state. • Enhance PL emission intensity of host material due to increase in singly ionized oxygen vacancy and 4f–5d transitions of Eu{sup 2+} • CIE co-ordinates suggest the blue–green colour of the samples.

36 MATERIALS SCIENCE↗

Influence of crystallographic orientation and applied magnetic field on domain structure in duplex stainless steel studied using magnetic force microscopy

Highlights: • Ferrite phase in a duplex stainless steel consists of stripe type domains. • Domain contrast decreases with deviation of plane normal from <100>. • Domain width increases with deviation of plane normal from <100>. • Domain alignment with applied field observed along <100> directions. • Grain boundary stray field is a function of misorientation between grains. - Abstract: The paper investigates the local micro-magnetization behavior in duplex stainless steel (DSS) using magnetic force microscopy (MFM). DSS has equal amount of austenite phase in ferrite matrix. The MFM imaging clearly differentiates ferrite phase (ferromagnetic) from the austenite phase (paramagnetic) due to the maze type magnetic domains present in the ferrite phase. The magneto crystalline anisotropic effect on the domain structure is discussed with the support of electron backscatter diffraction (EBSD) measurements. The MFM phase contrast and domain width are correlated with the orientation of surface normal with respect to the easy axis of magnetization (<100>). The influence of external magnetic field (±127 kA/m) application on the domain structure is studied as a function of the grain orientation and the leakage field at the grain boundaries is analyzed based on the mis-orientation between the grains.

36 MATERIALS SCIENCE↗

Extraordinary role of Ce-Ni elements on the electrical and magnetic properties of Sr-Ba M-type hexaferrites

The structural, electrical and magnetic behavior of Sr{sub 0.5}Ba{sub 0.5-x}Ce{sub x}Fe{sub 12-y}Ni{sub y}O{sub 19} (where x = 0.00-0.10; y = 0.00-1.00) hexaferrite nanomaterials are reported in this paper. The structural analysis indicates that the Ce-Ni doped Sr-Ba M-type hexaferrite samples synthesized by the co-precipitation method are stoichiometric, single magnetoplumbite phase with crystallite sizes in the range of 35-48 nm. The dc-electrical resistivity of the pure Sr-Ba hexaferrite is enhanced to almost 10{sup 2} times by doping with Ce-Ni contents of x = 0.06; y = 0.60. The dielectric constant and dielectric loss tangent decrease to values {approx}14 and <0.2, respectively, by increasing the frequency up to 1 MHz. Small relaxation peaks at frequencies >10{sup 5} Hz are observed for the samples with Ce content of x > 0.06. The values of saturation magnetization increase from 66.32 to 84.33 emu/g and remanance magnetization from 42.64 to 56.01 emu/g but coercivity decreases from 2.85 to 1.59 kOe by substitution of Ce-Ni. Sharp ferri-paramagnetic transition is observed in the samples, which is confirmed by DSC results. Ce-Ni substitution acts to reduce the electron-hopping between Fe{sup 2+}/Fe{sup 3+} ions and also improves the magnetic properties. These characteristics are desirable for their possible use in microwave and chip devices.

36 MATERIALS SCIENCE↗

Investigation of antiperovskite Mn{sub 3}CuN{sub x} film prepared by DC reactive magnetron sputtering

Antiperovskite Mn{sub 3}CuN{sub x} film was prepared by dc reactive magnetron sputtering. It is the first time to report an antiperovskite ternary nitride film. The composition and crystal structure were characterized by energy dispersive spectroscope (EDS), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). From the XRD pattern, it displays a (1 0 0) preferential orientation. A comparative study on the properties of Mn{sub 3}CuN{sub x} film and the bulk sample was presented. The film exhibits an antiferromagnetic to paramagnetic transition around 135 K, similar with the bulk sample. With temperature, the resistivity of the film shows semiconductor-like behavior throughout the measured temperature region, whereas there is an abrupt drop around the magnetic transition for the bulk. The variable temperature XRD results indicate that the film did not display any structure transition and shows a normal linear thermal expansion property around the magnetic transition.

36 MATERIALS SCIENCE↗

Phase stability study of Bi{sub 0.15}Sr{sub 0.85-x}Ae{sub x}CoO{sub 3-{delta}} (x = 0 and Ae = Ba{sub 0.28}; Ca{sub 0.17}) perovskites by in-situ neutron diffraction

The oxygen deficient perovskites, Bi{sub 0.15}Sr{sub 0.85-x}Ae{sub x}CoO{sub 3-{delta}}, x = 0 and Ae{sub x} = Ba{sub 0.28}, Ca{sub 0.17}, were studied with in-situ neutron powder diffraction and combined TGA/DSC in order to investigate their behaviour at elevated temperatures in oxidising conditions. The phase stability of the I4/mmm supercell structure adopted by Bi{sub 0.15}Sr{sub 0.85}CoO{sub 3-{delta}} is shown to be dependent on temperature and the oxygen content of the phase, with three structural events, at T {approx} 250, 590 and 880 {sup o}C, detected. The first transition occurs as the perovskite supercell vanishes due to oxygen absorption; the second transition is also associated with oxidation and involves the decomposition of the perovskite phase via an exothermic process to yield a dominant hexagonal phase. Finally, at T {approx} 900 {sup o}C the perovskite phase re-forms. For the Ba and Ca containing materials the decomposition to the hexagonal phase occurs at T {approx} 600 {sup o}C and {approx} 650 {sup o}C respectively. The presence of Ca at the A-site is found to stabilise the I4/mmm supercell structure in the range RT - 650 {sup o}C. The antiferromagnetic to paramagnetic transitions occur at T{sub N} {approx} 250 {sup o}C, T{sub N} {approx} 175 {sup o}C and T{sub N} {approx} 145 {sup o}C for the samples with Ae{sub x} = Ba{sub 0.28}, x = 0 and Ae{sub x} = Ca{sub 0.17}, respectively.

36 MATERIALS SCIENCE↗