Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oriented”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Circular orientation fluorescence emitter imaging (COFEI) of rotational motion of motor proteins

Single-molecule fluorescence polarization technique has been utilized to detect structural changes in biomolecules and intermolecular interactions. Here we developed a single-molecule fluorescence polarization measurement system, named circular orientation fluorescence emitter imaging (COFEI), in which a ring pattern of an acquired fluorescent image (COFEI image) represents an orientation of a polarization and a polarization factor. Rotation and pattern change of the COFEI image allow us to find changes in the polarization by eye and further values of the parameters of a polarization are determined by simple image analysis with high accuracy. We validated its potential applications of COFEI by three assays: 1) Detection of stepwise rotation of F{sub 1}-ATPase via single quantum nanorod attached to the rotary shaft γ; 2) Visualization of binding of fluorescent ATP analog to the catalytic subunit in F{sub 1}-ATPase; and 3) Association and dissociation of one head of dimeric kinesin-1 on the microtubule during its processive movement through single bifunctional fluorescent probes attached to the head. These results indicate that the COFEI provides us the advantages of the user-friendly measurement system and persuasive data presentations.

60 APPLIED LIFE SCIENCES↗

Fine-tuning the release of molecular guests from mesoporous silicas by controlling the orientation and mobility of surface phenyl substituents

Phenyl-functionalized mesoporous silica materials were used to explore the effect of non-covalent interactions on the release of Ibuprofen into simulated body fluid. Variations in orientation and conformational mobility of the surface phenyl groups were introduced by selecting different structural precursors: a rigid upright orientation was obtained using phenyl groups directly bound to surface Si atoms (Ph-MSN), mobile groups were produced by using ethylene linkers to connect phenyl groups to the surface (PhEt-MSN), and groups co-planar to the surface were obtained by synthesizing a phenylene-bridged periodic mesoporous organosilica (Ph-PMO). The Ibuprofen release profiles from these materials and non-functionalized mesoporous silica nanoparticles (MSN) were analyzed using an adsorption-diffusion model. The model provided kinetic and thermodynamic parameters that evidenced fundamental differences in drug-surface interactions between the materials. All phenyl-bearing materials show lower Ibuprofen initial release rates than bare MSN. The conformationally locked Ph-MSN and Ph-PMO have stronger interactions with the drug (negative ΔG of adsorption) than the flexible PhEt-MSN and bare MSN (positive ΔG of adsorption). These differences in strength of adsorption are consistent with differences between interaction geometries obtained from DFT calculations. B3LYP-D3-optimized models show that π-π interactions contribute more to drug adsorption than H-bonding with silanol groups. Here, the results suggest that the type and geometry of interactions control the kinetics and extent of drug release, and should therefore serve as a guide to design new drug delivery systems with precise release behaviors customized to any desired target.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Object-Oriented Finite Element Framework for Multiphysics Phase Field Simulations

The phase field approach is a powerful and popular method for modeling microstructure evolution. In this work, advanced numerical tools are used to create a phase field framework that facilitates rapid model development. This framework, called MARMOT, is based on Idaho National Laboratory's finite element Multiphysics Object-Oriented Simulation Environment. In MARMOT, the system of phase field partial differential equations (PDEs) are solved simultaneously with PDEs describing additional physics, such as solid mechanics and heat conduction, using the Jacobian-Free Newton Krylov Method. An object-oriented architecture is created by taking advantage of commonalities in phase fields models to facilitate development of new models with very little written code. In addition, MARMOT provides access to mesh and time step adaptivity, reducing the cost for performing simulations with large disparities in both spatial and temporal scales. In this work, phase separation simulations are used to show the numerical performance of MARMOT. Deformation-induced grain growth and void growth simulations are included to demonstrate the muliphysics capability.

36 MATERIALS SCIENCE↗

Effects of fiber dosage, loading orientation and stress on frequency response of enhanced Carbon Nano-Fiber Aggregates

Nanomaterial additives have been broadly used in cement and concrete-based sensors to measure the stress and strain in the structure. Most of the studies focused on measuring the resistivity of sensors with Direct Current (DC) or relatively low-frequency. Here in this work, the impedance responses of enhanced Carbon Nano-Fiber Aggregates (CNFAs) at different frequencies are rigorously studied and utilized as a tool for real-time structural health monitoring (SHM). The CNFA impedance measurements at different measurement frequencies provide an extra dimension (frequency dimension) to allow the characterization of different phenomena and multimodal measurements simultaneously. First, a comprehensive physical model is established to understand the frequency responses of the CNFA impedance. Second, COMSOL Multiphysics is used to simulate the frequency responses of the CNFA impedance, which provides more insights into the electric field and current density distribution. The impedance of CNFAs decreased with the increased dosage of carbon nanofibers (CNFs). Third, experimental studies are reported in detail. The electrical impedance variation (EZV) of the CNFA in parallel orientation is 151% higher than that of perpendicular orientation at the frequency of 2612 Hz and uniaxial compression stress of 4.65 MPa. The strain-EZV curve obtained from the response spectrum is linear for frequencies ranging from 98 Hz to 463.9 kHz. The strain-EZV curve for 5625 Hz has a linear fit with the gauge factor of 147.78. At 1000 Hz, the CNFA exhibited a repeatable behavior up to 9.35 MPa and detection limit up to the stress of 18.62 MPa.

36 MATERIALS SCIENCE↗

Effects of build orientation and heat treatment on the evolution of microstructure and mechanical properties of alloy Mar-M-509 fabricated via laser powder bed fusion

We present the main results from an experimental investigation into the consequences of various microstructural features, created by laser powder bed fusion (LPBF) and subsequent heat treatments (HTs), in alloy Mar-M-509 on several aspects of plastic deformation including mechanical anisotropy and elongation-to-fracture (ETF). To ensure successful manufacturing of the alloy, porosity fraction and distribution are first characterized using micro X-ray computed tomography. Next, grain structure, crystallographic texture, and regions of recrystallization in the studied microstructures are measured using electron backscattered diffraction (EBSD). Lastly, chemistry, distribution, and morphological features of carbide phases are extracted using electron microscopy and X-ray diffraction. Strength in tension and compression are measured at room temperature for different initial microstructures created by variations in manufacturing conditions and sample orientations with respect to sample processing frame. While the strength of the alloy varies with sample orientation by approximately 30% in the as-built condition, the alloy is softer, more ductile, and approximately isotropic after HT. These results are discussed and critically compared with the data reported for the as-cast material. The alloy manufactured via LPBF is found to be significantly stronger and more ductile than the same alloy produced by casting. The interesting deformation behavior characteristics of the samples in different conditions are explained in terms of their microstructures. EBSD measurements reveal evolution from columnar grains along the build direction favoring a moderately strong <001> fiber texture in the as-built material to equiaxed grains favoring the {110}<001> Goss texture component after subsequent HTs. The major change in grain structure and texture is a result of recrystallization. While carbide phases precipitate primarily at dendrite and cellular interfaces in the as-built material, these phases are both intra-and inter-granular within the HT materials and coarsen with HT duration. These microstructural observations formed bases to rationalize the observed mechanical behavior of the alloy. With this being said, tailoring the alloy performance characteristics with HTs is reported on.

36 MATERIALS SCIENCE↗

Effect of neighboring grain orientation on strain localization in slip bands in HCP materials

Particularly in plastically anisotropic crystals, such as hexagonal close packed (HCP) materials, plastic deformation is realized by slip acting in the small volumes within individual crystals. Here we extend a full field fast Fourier transform (FFT)-based elasto-viscoplastic formulation to simulate the development of a single slip band on either prismatic or basal planes spanning a crystal. Calculations of the strain and stress fields induced locally within the band and parent crystal, and ahead of the band/grain boundary junction in the neighboring crystal are analyzed as the slip band intensifies under increasing applied strain. We report a substantial influence of the crystallographic orientation of the nearest neighboring grain on the rate of slip band localization. Performing the analysis on two materials, CP-Ti and Mg, indicates that the strength of the material affects the rate of localization, with stronger materials tending to localize more easily. A slip band tip stress-based criterion is proposed for identifying the nearest neighbor orientations in which slip band transmission is possible and the likely slip system for which it occurs. This indicator is validated against experimental studies on commercially pure Ti, an Mg–Y alloy, and Ti–6Al–4V. Finally, we show that for low GB misorientations, the slip band is likely to transmit into another slip band of the same type in the neighbor grain, while for high GB misorientations, it is likely to transmit into one of a different type or to not transmit at all.

36 MATERIALS SCIENCE↗

Determination of the relative orientation between 15 N- 1 H dipolar coupling and 1 H chemical shift anisotropy tensors under fast MAS solid-state NMR

Here, in this work, we have proposed a proton-detected three-dimensional (3D) 15 N- 1 H dipolar coupling (DIP)/ 1 H chemical shift anisotropy (CSA)/ 1 H chemical shift (CS) correlation experiment to measure the relative orientation between the 15 N- 1 H dipolar coupling and the 1 H CSA tensors under fast magic angle spinning (MAS) solid-state NMR. In the 3D correlation experiment, the 15 N- 1 H dipolar coupling and 1 H CSA tensors are recoupled using our recently developed windowless C-symmetry-based $C3^{1}_{3}$-ROCSA (recoupling of chemical shift anisotropy) DIPSHIFT and $C3^{1}_{3}$-ROCSA pulse-based methods, respectively. The 2D 15 N- 1 H DIP/ 1 H CSA powder lineshapes extracted using the proposed 3D correlation method are shown to be sensitive to the sign and asymmetry of the 1 H CSA tensor, a feature that allows the determination of the relative orientation between the two correlating tensors with improved accuracy. The experimental method developed in this study is demonstrated on a powdered U- 15 N L-Histidine.HCl·H 2 O sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The evolvement of pits and dislocations on TiO{sub 2}-B nanowires via oriented attachment growth

TiO{sub 2}-B nanowires were synthesized by an ion exchanging-thermal treatment. The unique morphology of pits and dislocations interspersed on TiO{sub 2}-B nanowires were firstly characterized and studied by high-resolution transmission electron microscopy (HRTEM). Oriented attachment is suggested as an important growth mechanism in the evolvement of pits and dislocations on TiO{sub 2}-B nanowires. Lattice shears and fractures were originally formed during the ion exchanging process of the sodium titanate nanowires, which resulted in the formation of primary crystalline units and vacancies in the layered hydrogen titanate nanowires. Then the (110) lattice planes of TiO{sub 2}-B grown in [110] direction is faster than the other lattice planes, which caused the exhibition of long dislocations on TiO{sub 2}-B nanowires. The enlargement of the vacancies, which was caused by the rearrangement of primary crystalline units, should be the reason of the formation of pits. Additionally, the transformation from TiO{sub 2}-B to anatase could be also elucidated by oriented attachment mechanism. - Graphical abstract: The unique morphology of pits and dislocations on TiO{sub 2}-B nanowires shown in high-resolution transmission electron microscopy (HRTEM) and a proposed evolvement mechanism of pits and dislocations on TiO{sub 2}-B nanowires.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Creep property and microstructure evolution of a nickel-base single crystal superalloy in [011] orientation

The creep property and microstructure evolution of a single crystal superalloy with [011] orientation were investigated at the temperatures of 700 °C, 900 °C and 1040 °C. It is shown that there exist stages of primary, steady-state, and tertiary creep under the lower temperature 700 °C. As the temperature increases to high temperatures of 900 °C and 1040 °C, steady-state creep stage is reduced or disappears and the shape of creep curves is dominated by an extensive tertiary stage. The minimum creep strain rate exhibits power law dependence on the applied stress; the stress exponents at 700 °C, 900 °C and 1040 °C are 28, 13 and 6.5, respectively. Microstructure observation shows that the morphologies of γ′ phase almost keep original shape at the lower temperature 700 °C and high applied stress. With the increasing creep temperature, γ′ precipitates tend to link together and form lamellar structure at an angle of 45° inclined to the applied stress. Transmission electron microscopy (TEM) investigations reveal that multiple < 110 > (111) slip systems gliding in the matrix channels and shearing γ′ precipitates by stacking faults or bending dislocation pairs are the main deformation mechanism at the lower temperature of 700 °C. At the high temperatures of 900 °C and 1040 °C, dislocation networks are formed at γ/γ′ interfaces and the γ′ rafts are sheared by dislocation pairs. - Highlights: • Creep properties of < 011 >-oriented single crystal superalloys were investigated. • γ′ phases become rafting at an angle of 45° inclined to the applied stress. • Creep deformation mechanisms depend on temperature and stress.

36 MATERIALS SCIENCE↗

Morphology and crystallographic orientation relationship in isothermally transformed Fe–N austenite

The 225 °C isothermal transformation of a high-nitrogen austenite with Fe–2.71 wt.% N was investigated by means of electron microscopy. It was found that the transformation products were composed of ultrafine α-Fe and γ′-Fe{sub 4}N plus retained austenite γ, which were in two types of morphologies, namely, (i) with the retained austenite patches dispersed among the (α-Fe + γ′-Fe{sub 4}N) packets and (ii) with the ultrafine α-Fe and γ/γ′-Fe{sub 4}N laths interwoven with each other within a single bainitic packet. A cube–cube orientation relationship between the γ (austenite) and γ′-Fe{sub 4}N, and a near Greninger–Troiano (G–T) one between the γ (austenite) and the bainitic α-ferrite were detected. The morphology, orientation relationship and high hardness (> 1000 HV) of the transformation products indicated that the isothermal transformation of the high nitrogen austenite was analogous to a bainitic one. - Highlights: • Isothermal transformation products consisted of nano-sized α-Fe + γ′ + γ (retained). • The hardness of transformation product exceeded 1000 HV. • The α-Fe and γ/γ′-Fe{sub 4}N kept a near G-T OR in the grain interior.

36 MATERIALS SCIENCE↗

Orientation dependence of the dislocation microstructure in compressed body-centered cubic molybdenum

The orientation dependence of the deformation microstructure has been investigated in commercial pure molybdenum. After deformation, the dislocation boundaries of compressed molybdenum can be classified, similar to that in face-centered cubic metals, into three types: dislocation cells (Type 2), and extended planar boundaries parallel to (Type 1) or not parallel to (Type 3) a (110) trace. However, it shows a reciprocal relationship between face-centered cubic metals and body-centered cubic metals on the orientation dependence of the deformation microstructure. The higher the strain, the finer the microstructure is and the smaller the inclination angle between extended planar boundaries and the compression axis is. - Highlights: • A reciprocal relationship between FCC metals and BCC metals is confirmed. • The dislocation boundaries can be classified into three types in compressed Mo. • The dislocation characteristic of different dislocation boundaries is different.

36 MATERIALS SCIENCE↗

Evolution of microstructure, texture and inhibitor along the processing route for grain-oriented electrical steels using strip casting

In the present work, a regular grade GO sheet was produced successively by strip casting, hot rolling, normalizing annealing, two-stage cold rolling with intermediate annealing, primary recrystallization annealing, secondary recrystallization annealing and purification. The aim of this paper was to characterize the evolution of microstructure, texture and inhibitor along the new processing route by comprehensive utilization of optical microscopy, X-ray diffraction and transmission electron microscopy. It was found that a fine microstructure with the ferrite grain size range of 7–12 μm could be obtained in the primary recrystallization annealed sheet though a very coarse microstructure was produced in the initial as-cast strip. The main finding was that the “texture memory” effect on Goss texture started on the through-thickness intermediate annealed strip after first cold rolling, which was not similar to the “texture memory” effect on Goss texture starting on the surface layers of the hot rolled strip in the conventional production route. As a result, the origin of Goss nuclei capable of secondary recrystallization lied in the grains already presented in Goss orientation in the intermediate annealed strip after first cold rolling. Another finding was that fine and dispersive inhibitors (mainly AlN) were easy to be produced in the primary recrystallization microstructure due to the initial rapid solidification during strip casting and the subsequent rapid cooling, and the very high temperature reheating usually used before hot rolling in the conventional production route could be avoided. - Highlights: • A regular grade grain-oriented electrical steel was produced. • Evolution of microstructure, texture and inhibitor was characterized. • Origin of Goss nuclei lied in the intermediate annealed strip. • A fine primary recrystallization microstructure could be produced. • Effective inhibitors were easy to be obtained in the new processing route.

36 MATERIALS SCIENCE↗

Orientation relationships of phase transformation in α-Al12Mn3Si pseudomorphs after plate-like Al6Mn precipitate in an AA3004 Al-Mn based alloy

Highlights: • The phase transformation in the plate-like precipitates was investigated by TEM. • The shape of a plate-like Al{sub 6}Mn was kept after transforming to the α-Al{sub 12}Mn{sub 3}Si. • Pseudomorph in metal materials has been found out. - Abstract: The phase transformation in the plate-like precipitates of Al{sub 6}Mn in an AA3004 Al-Mn based alloy, which was prepared by a chemical extraction technique, was investigated using transmission electron microscopy. The boiling-phenol method observed the entire range of possible shapes of the precipitates and the habit planes of the plate-like Al{sub 6}Mn were <001> in the sheet plane and <110> on its edges. The two orientation relationships between Al{sub 6}Mn and α-Al{sub 12}Mn{sub 3}Si after the phase transformation is observed to be [00 1-bar ]{sub 6}//[02 3-bar ]{sub α} and (130){sub 6}//(5 3-bar 2){sub α} and [00 1-bar ]{sub 6}//[1 5-bar 2]{sub α} and (200){sub 6}//(311){sub α} (particles 1 and 2) (the suffixes 6 and α indicate zone axises or lattice planes of Al{sub 6}Mn and α-Al{sub 12}Mn{sub 3}Si phases, respectively). The lattice misfits in these orientation relationships were observed to be − 1.4% and 1.0%, respectively. Additionally, the thickness of the plate-like Al{sub 6}Mn was kept constant after transforming into the α-Al{sub 12}Mn{sub 3}Si phase. Further, we did not observe any low index planes of the α-Al{sub 12}Mn{sub 3}Si parallel to the (001) plane of the Al{sub 6}Mn, which means that the outlines of α-Al{sub 12}Mn{sub 3}Si were constrained by the original shape of Al{sub 6}Mn, i.e., the transformed α-Al{sub 12}Mn{sub 3}Si may be considered as a pseudomorph after Al{sub 6}Mn.

36 MATERIALS SCIENCE↗

Effects of thickness and orientation on the small scale fracture behaviour of additively manufactured Ti-6Al-4V

Highlights: • Miniaturized specimens successfully additively manufactured via SLM and SEBM. • Small-scale tensile testing of specimens to capture orientation/thickness effect. • Tomography characterization of defects. • Location dependence of fracture behavior. - Abstract: The effects of sample location, orientation, and thickness on the microstructure and resulting tensile properties of miniature SLM and SEBM AM samples of Ti-6Al-4V has been determined. Microstructure and mechanical property variations in the miniature samples are shown to be related to build orientation and also partly to specimen thickness and position within the build chamber. The present work is our initial attempt to develop a systematic approach for characterization of the microstructure (including defects via tomography) and mechanical properties on miniature AM test specimens that can also be used to reveal issues related to process stability (e.g. fluctuations in build conditions). The discussion is also included regarding their relevance to miniature samples that can be manufactured along with parts, excised from larger samples, and/or excised from actual manufactured components.

36 MATERIALS SCIENCE↗

Secondary recrystallization behavior in strip-cast grain-oriented silicon steel processed by isothermal secondary annealing

Highlights: • Abnormal grain growth was successfully developed after annealing at 1025 °C for 15 min. • The formation mechanism of the Goss and {110}<227> secondary grains was elucidated. • Retention of matrix grain colonies in the interior or at the grain boundaries of secondary grains was explained. - Abstract: The primary annealed sheets of strip-cast grain-oriented silicon steel were isothermally secondary annealed for 15 min under 100% H{sub 2} atmosphere. The microstructure and crystallographic orientation at different annealing temperatures were characterized and the secondary recrystallization behavior was elucidated. It was observed that relatively complete abnormal grain growth occurred at 1025 °C. Incomplete abnormal grain growth developed when the temperature was lower than 1025 °C, and normal grain growth occurred when the temperature was higher than 1025 °C. During the abnormal grain growth, both of the Goss and {110}<227> grains developed because of the rapid decrease of the inhibiting force and the limited annealing time. Considering the high energy boundary (HE), coincidence site lattice boundary (CSL) and solid-state wetting (SSW) models for abnormal grain growth, the first one explained the development of the Goss and {110}<227> grains. Another result was that several matrix grain colonies were observed in the interior or at the boundaries of secondary grains after abnormal grain growth. The grains at the periphery of these colonies showed a large fraction of high energy boundaries (20–45° misorientation) with the surrounding secondary grain and similar grain size with the unconsumed matrix grains. Therefore, these colonies were expected to be consumed by prolonging the annealing time and thus the limited annealing time was responsible for their occurrence. A possible explanation for the dominated high energy boundaries instead of low energy boundaries at the periphery of these colonies was proposed. All of these behaviors promoted the understanding of abnormal grain growth.

36 MATERIALS SCIENCE↗

Effect of annealing after strip casting on microstructure, precipitates and texture in non-oriented silicon steel produced by twin-roll strip casting

Highlights: • Non-oriented silicon steel with superior magnetic properties was produced by twin-roll strip casting. • The effect of annealing after strip casting on microstructure, precipitates and texture was investigated. • Role of precipitates in microstructure and texture evolution along the entire route was explored. • High magnetic induction and strong λ-fiber texture was obtained by optimizing strip annealing process. - Abstract: A 3.1 mm thick non-oriented Fe-1.0% Si steel as-cast strip was produced by twin-roll strip casting. Samples with/without strip annealing were cold rolled to 0.5 mm and then annealed. The development of microstructure, precipitate and texture was characterized along the entire processing route. It was found that annealing after strip casting had a minor influence on the average grain size and texture of the as-cast strip. A large number of particles precipitated and coarsened during the strip annealing process. Meanwhile, precipitates hindered dislocation slip and crystal rotation such that more significant in-grain shear bands were formed in cold rolled sheets. During recrystallization annealing process, the newly formed fine precipitates in directly cold-rolled sheets consumed stored strain energy and also hindered grain growth. But the initial precipitates in the annealed strip grew further and the effect of pinning of dislocations and grain boundary was lost. Therefore, annealed sheets with strip annealing process showed homogeneous equiaxed grains and the recrystallization texture was characterized by strong λ-fiber texture, which led to high permeability.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of {beta}-nickel hydroxide nanocrystalline thin film and growth of oriented carbon nanofibers

Novel well-crystallized {beta}-nickel hydroxide nanocrystalline thin films were successfully synthesized at low temperature on the quartz substrates by hydrothermal method, and the oriented carbon nanofibers (CNFs) were prepared by acetylene cracking at 750 deg. C on thin film as the catalyst precursor. High resolution transmission electron microscopy (HR-TEM) measurement shows that thin films were constructed mainly with hexagonal {beta}-nickel hydroxide nanosheets. The average diameter of the nanosheets was about 80 nm and thickness about 15 nm. Hydrothermal temperature played an important role in the film growth process, influencing the morphologies and catalytic activity of the Ni catalysts. Ni thin films with high catalytic activity were obtained by reduction of these Ni(OH){sub 2} nanocrystalline thin films synthesized at 170 deg. C for 2 h in hydrothermal condition. The highest carbon yield was 1182%, and was significantly higher than the value of the catalyst precursor which was previously reported as the carbon yield (398%) for Ni catalysts. The morphology and growth mechanism of oriented CNFs were also studied finally.

36 MATERIALS SCIENCE↗

Effect of Bi and Ti substitutions for Na and Nb on ferroelectric properties of oriented (Bi{sub 4.5+x}Na{sub 0.5-x})(Ti{sub 2x}Nb{sub 2-2x})WO{sub 15} compounds

Research highlights: {yields} (Bi{sub 4.5+x}Na{sub 0.5-x})(Ti{sub 2x}Nb{sub 2-2x})WO{sub 15} formed solid solution over whole composition range. {yields}P{sub r} of BNTNW decreased from 8.5 to 5.1 {mu}C/cm{sup 2} with increasing composition x. {yields} By using hot forging, P{sub r} of BNTNW at x = 0 was extremely improved (P{sub r} = 18 {mu}C/cm{sup 2}). -- Abstract: (Bi{sub 4.5+x}Na{sub 0.5-x})(Ti{sub 2x}Nb{sub 2-2x})WO{sub 15} (BNTNW) compounds were synthesized and their ferroelectric properties were characterized. The X-ray powder diffraction patterns of the compounds revealed that they have a single phase over the whole composition range. The linear variations of the lattice parameters with composition indicate the formation of solid solutions, resulting in a reduction in the orthorhombicity of the compounds. The remnant polarization of the BNTNW decreased from 8.5 to 5.1 {mu}C/cm{sup 2} with increasing x, which may be related to the orthorhombicity of the compounds. By using hot forging, an oriented BNTNW compound at x = 0 was obtained. Strong reflections from (0 0 l) were observed for sample // in which the measurement direction is parallel and the orientation factor of such sample was approximately 0.72. A remarkable increase in the remnant polarization (P{sub r}) of the compound was observed for the sample -perpendicular in which the direction of applied pressure is perpendicular to the measurement direction; the highest P{sub r} value was 18 {mu}C/cm{sup 2}.

36 MATERIALS SCIENCE↗