Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “neutral model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

New μ forces from ν μ sources

Accelerator-based experiments reliant on charged pion and kaon decays to produce muon-neutrino beams also deliver an associated powerful flux of muons. Therefore, these experiments can additionally be sensitive to light new particles that preferentially couple to muons and decay to visible final states on macroscopic length scales. Such particles are produced through rare 3-body meson decays in the decay pipe or via muon scattering in the beam dump, and decay in a downstream detector. To demonstrate the potential of this search strategy, we recast existing MiniBooNE and MicroBooNE studies of neutral pion production in neutrino-induced neutral-current scattering ( ν μ N → ν μ N π 0 , π 0 → γ γ ) to place limits on light ( < 2 m μ ) muon-philic scalar particles that decay to diphotons through loops of virtual muons. While much of this parameter space has already been excluded by E137, we also project that SBND can be sensitive to unexplored parameter space for these models, and provide a road map for future neutrino experiments to perform dedicated searches for muon-philic forces. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Impact of the Lightning Surge on SiC-based Medium-voltage Three-phase Four-wire Grid-connected Converters

The surge voltage induced by lightning will generate an inrush current in a grid-connected converter. It may not be large in Si-based converters because of the large grid side inductive filter. However, for SiC-based multi-level converters, the inrush current could be very large due to the small filter inductance, which is selected based on the current harmonic consideration. Most previous work focuses on system-level lightning protection while the converter-level impact, especially the internal components of the converter, is rarely discussed. This paper presents the analysis of the impact of the lightning surge on a 10 kV SiC MOSFET-based 13.8 kV three-phase four-wire grid-connected converter. The IEEE arrester model and the combined wave generator model in IEC 61000-4-5 standard are used to evaluate the inrush current, DC-link overvoltage, and component-to-ground potential of the converter. Analysis and simulation results have been provided to demonstrate the impact of lightning on the grid-connected converter. It is found that large inrush current occurs due to the small filter inductance, and the neutral-to-ground impedance impacts both the inrush current and the neutral point-to-ground potential.

Li, Haiguo↗

Robust Solution Approach for Bilevel Demand Response Game at Distribution Level

In this paper, a bilevel electricity pricing and demand response game between a distribution system operator (DSO) and load aggregators (LAs) is considered, and a robust decision model is proposed for the DSO to deal with the uncertainties from the wholesale market prices and demand consumptions of LAs. With the max-min objective at the upper level, the robust bilevel model is converted into a single level model by the Karush-Kuhn-Tucker (KKT) conditions and prime-dual transformation. Several groups of experiments have been conducted based on different preferences on uncertainty gaps and peak load reductions to show its effectiveness. After-the-fact scenario analysis has indicated that the robust solution is more beneficial in reducing the risk of inaccurate predictions as compared to the risk neutral strategy.

Chen, Yang↗

Observed impacts of large wind farms on grassland carbon cycling

Deployment of wind energy is an essential renewable energy source that mitigates climate change and reduces air pollution. Over the last several decades, wind energy development has increased worldwide, expanding from ~20 to ~900 GW (gigawatt) during 2001-2022. Nonetheless, researchers have identified unintended consequences of wind energy on microclimate via turbine-altered surface-atmosphere exchanges of energy, momentum, mass, and trace gases. Based on multi-source observations and models, researchers also have drawn some conclusions that wind farms could warm the land surface, especially at night, at regional and continental scales. Consequently, altered microclimates at wind farms may affect vegetation productivity and carbon sequestration, two critically important ecosystem services related to carbon dynamics; however, such potential impacts and driving mechanisms remain poorly understood. Wind energy deployment is increasing globally to meet carbon neutrality goals, with upscaling of onshore wind power capacity projected to grow from 542 GW in 2018 to 1787 and 5044 GW by 2030 and 2050, respectively. Furthermore, increased demand for wind energy deployment may lead to much larger wind farms in open, expansive landscapes. In turn, a large array of geographically clustered wind turbines could collectively modify local microclimate and amplify turbine-atmosphere interactions, which, if large enough, may produce detectable impacts on ecosystem dynamics. Thus, identifying and quantifying the potential impacts of wind farms on carbon-related ecosystem services may facilitate sustainable wind energy development globally.

17 WIND ENERGY↗

Modular Integrated System for Carbon-Neutral Methanol Synthesis Using Direct Air Capture and Carbon-Free Hydrogen Production

This study investigates the development and economic analysis of a modular integrated system for carbon-neutral methanol synthesis, leveraging direct air capture (DAC) and solid oxide electrolysis cells (SOEC) for carbon dioxide and hydrogen production, respectively. The proposed system integrates a novel building-based DAC process, functionalized solid sorbents, and low-energy SOEC technology, aiming to minimize operational and capital costs. A comparison between the base case system (1,000 t methanol/year) and a scaled-up model (14,758 t methanol/year) reveals significant improvements in efficiency and economic feasibility. The scaled-up system achieves a levelized cost of methanol (LCOM) of $740/t, a 7.5% reduction compared to that of conventional DAC-based systems, while utilizing existing building HVAC infrastructure for air handling. Detailed sensitivity analyses were conducted, evaluating the effects of plant capacity and air flow rate on the LCOM, demonstrating the scalability of the building-based DAC system. The cradle-to-gate life cycle analysis shows that the proposed process using renewable-sourced electricity achieves a 38% reduction in greenhouse gas (GHG) emission compared to reported values of green methanol production technologies that use a conventional DAC and a conventional methanol synthesis catalyst. When fossil-sourced electricity is used in the proposed process, it leads to about a 37.5% reduction in GHG emission in comparison to reported values for conventional methanol production technologies using steam methane reforming technology and fossil-sourced electricity.

alcohols↗

Modeling q 95 windows for the suppression of edge localized modes by resonant magnetic perturbations in the DIII-D tokamak

A toroidal asymptotic matching model of the response of a tokamak plasma to a static resonant magnetic perturbation (RMP) is used to simulate the n = 3 RMP-induced edge-localized-mode-suppression windows in q 95 that are evident when the plasma current is slowly ramped in DIII-D discharge #145380. All quantities employed in the simulation are derived from experimental measurements, apart from the neutral particle data. Three cases are considered. In the first case, the natural frequencies of tearing modes resonant in the plasma are determined by the ion flows at the corresponding resonant surfaces, which is the prediction of nonlinear tearing mode theory. In the second case, the natural frequencies are determined by the local E x B velocities at the resonant surfaces. In the third case, the natural frequencies are determined by the electron flows at the resonant surfaces, which is the prediction of linear tearing mode theory. The second case gives the best agreement between the simulations and the experimental observations. The first and third cases only lead to partial agreement between the simulations and the observations. In the first case, the lack of complete agreement may be a consequence of using an inaccurate assumption for the neutral particle distribution in the pedestal. In the third case, the lack of complete agreement is probably due to the fact that the response of a tokamak plasma to an RMP is not accurately described by linear tearing mode theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effect of pellet injection on turbulent transport in TJ-II

An improvement in confinement associated with the injection of pellets has been observed in TJ-II and other devices. By means of a simple model, we study here the modification of turbulent transport by the injection of pellets in TJ-II and how this modification affects the particle confinement time. The analysis of the results shows the relationship of the confinement improvement with the evolution of the shear flow due to turbulence, especially near low order rational surfaces. This work is based on pellet injections into the neutral beam injection heated phase of TJ-II plasmas. For this, single, double, or triple hydrogen pellet injection are considered and the post-injection evolution of selected plasma parameters are analyzed and compared.

Physics↗

Measurement of In-Medium Jet Modification Using Direct Photon + Jet and 𝜋 0 + Jet Correlations in 𝑝 + 𝑝 and Central Au + Au Collisions at $\sqrt{s_{NN}}$ = 200 GeV

The STAR Collaboration presents measurements of the semi-inclusive distribution of charged-particle jets recoiling from energetic direct-photon (𝛾 dir ) and neutral-pion (𝜋 0 ) triggers in 𝑝 + 𝑝 and central Au + Au collisions at $\sqrt{s_{NN}}$ =2 00 GeV over a broad kinematic range, for jet resolution parameters 𝑅 = 0.2 and 0.5. Medium-induced jet yield suppression is observed to be larger for 𝑅 = 0.2 than for 0.5, reflecting the angular range of jet energy redistribution due to quenching. The predictions of model calculations incorporating jet quenching are not fully consistent with the observations. Furthermore, these results provide new insight into the physical origins of jet quenching.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Search for a Neutral Gauge Boson with Nonuniversal Fermion Couplings in Vector Boson Fusion Processes in Proton-Proton Collisions at $\sqrt{𝑠}$ = 13 TeV

The first search for a heavy neutral spin-1 gauge boson (𝑍′) with nonuniversal fermion couplings produced via vector boson fusion processes and decaying to tau leptons or 𝑊 bosons is presented. The analysis is performed using LHC data at $\sqrt{𝑠}$ = 13 TeV, collected from 2016 to 2018 with the CMS experiment and corresponding to an integrated luminosity of 138 fb −1 . The data are consistent with the standard model predictions. Upper limits are set on the product of the cross section for production of the 𝑍′ boson and its branching fraction to 𝜏⁢𝜏 or 𝑊⁢𝑊. The presence of a 𝑍′ boson decaying to 𝜏 + ⁢𝜏 − (𝑊 + ⁢𝑊 − ) is excluded for masses up to 2.45(1.60) TeV, depending on the 𝑍′ boson coupling to standard model weak bosons, and assuming a 𝑍′→𝜏 + ⁢𝜏 − (𝑊 + ⁢𝑊 − ) branching fraction of 50%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Power Layout Design of a GaN HEMTs-Based High-Power High-Efficiency Three-Level ANPC Inverter for 800 V DC Bus System

Multiple commutation paths exist for switching devices in a three-level active neutral point clamped (3L-ANPC) inverter operation based on the selected switching state and current direction. In addition, the capacitive coupling path of the nonswitching device is a key design aspect for enabling high voltage and high current operation of gallium nitride (GaN) switches in 3L-ANPC topology. A comprehensive study of the switching transient events of inner, outer, and clamping devices of 3L-ANPC is presented in this article. The commutation mechanisms for worst-case transient voltage overshoots (TVOs) are identified. A simplified equivalent circuit model is presented to determine the design criteria for the power layout structure's parasitic inductances. A power layout strategy satisfying the design criteria is then proposed using an insulated metal substrate power printed circuit board (PCB) to enable efficient high-power operation. The proposed design minimizes the commutation and capacitive coupling path inductances to 6 nH and 11.5 nH, respectively. This enables the fast switching operation of GaN HEMTs at 800 V dc, 36 A with a low TVO of 31% verified through experimental three-level double pulse test results. Experimental evaluation of a three-phase 3L-ANPC hardware prototype based on the proposed power layout shows 99% efficiency at 800 V, 9.5 kVA and 50 kHz switching frequency. The proposed design achieves a low case-to-ambient thermal resistance of 2.3 °C/W.

42 ENGINEERING↗

Search for a new scalar resonance in flavour-changing neutral-current top-quark decays $t → qX (q = u, c)$, with $X → b\overline{b} $, in proton-proton collisions at $ \sqrt{s} $ = 13 TeV with the ATLAS detector

A search for flavour-changing neutral-current decays of a top quark into an up-type quark (either up or charm) and a light scalar particle X decaying into a bottom anti-bottom quark pair is presented. The search focuses on top-quark pair production where one top quark decays to qX, with X → $b\bar{b}$, and the other top quark decays according to the Standard Model, with the W boson decaying leptonically. The final state is thus characterised by an isolated electron or muon and at least four jets. Events are categorised according to the multiplicity of jets and jets tagged as originating from b-quarks, and a neural network is used to discriminate between signal and background processes. The data analysed correspond to 139 fb –1 of proton–proton collisions at a centre-of-mass energy of 13 TeV, recorded with the ATLAS detector at the LHC. The 95% confidence-level upper limits between 0.019% and 0.062% are derived for the branching fraction $\mathcal{B}$(t → uX) and between 0.018% and 0.078% for the branching fraction $\mathcal{B}$(t → cX), for masses of the scalar particle X between 20 and 160 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optimized CRISPR Interference System for Investigating Pseudomonas alloputida Genes Involved in Rhizosphere Microbiome Assembly

Pseudomonas alloputida KT2440 (formerly P. putida) has become both a well-known chassis organism for synthetic biology and a model organism for rhizosphere colonization. Here, we describe a CRISPR interference (CRISPRi) system in KT2440 for exploring microbe–microbe interactions in the rhizosphere and for use in industrial systems. Our CRISPRi system features three different promoter systems (XylS/P m , LacI/P lac , and AraC/P BAD ) and a dCas9 codon-optimized for Pseudomonads, all located on a mini-Tn7-based transposon that inserts into a neutral site in the genome. It also includes a suite of pSEVA-derived sgRNA expression vectors, where the expression is driven by synthetic promoters varying in strength. We compare the three promoter systems in terms of how well they can precisely modulate gene expression, and we discuss the impact of environmental factors, such as media choice, on the success of CRISPRi. We demonstrate that CRISPRi is functional in bacteria colonizing the rhizosphere, with repression of essential genes leading to a 10–100-fold reduction in P. alloputida cells per root. Finally, we show that CRISPRi can be used to modulate microbe–microbe interactions. When the gene pvdH is repressed and P. alloputida is unable to produce pyoverdine, it loses its ability to inhibit other microbes in vitro. Furthermore, our design is amendable for future CRISPRi-seq studies and in multispecies microbial communities, with the different promoter systems providing a means to control the level of gene expression in many different environments.

Bacteria↗

Quasi-mode evolution in a stochastic magnetic field

Abstract We present a multi-scale model of quasi-mode evolution in a stochastic magnetic field. The similarity between a quasi-mode and a ballooning mode enables us to address the challenges arising from the disparate geometries in the theories of ballooning modes in the presence of resonant magnetic perturbations. We obtain useful insights into our understanding of ballooning mode dynamics in a stochastic background. To maintain quasi-neutrality at all scales, the beat between the quasi-mode and the stochastic magnetic field drives microturbulence, which drives the turbulent background that promotes mixing and damps the quasi-mode. As a result of the broad mode structure of the quasi-mode, the turbulent viscosity and the turbulent diffusivity produced by the microturbulence are larger than those in our related study on resistive interchange modes. The stochastic magnetic field can also enhance the effective plasma inertia and reduce the effective drive, thereby slowing the mode growth. A nontrivial correlation between the microturbulence and the magnetic perturbations is shown to develop. This could account for the reduction in the Jensen–Shannon complexity of pedestal turbulence in the Resonant Magnetic Perturbation Edge-Localized Mode suppression phase observed in recent experiments. Directions for future experimental and theoretical studies are suggested.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Monte Carlo event generator for initial conditions of conserved charges in nuclear geometry

At top collider energies where baryon stopping is negligible, the initial state of heavy-ion collisions is overall charge neutral and predominantly composed of gluons. Nevertheless, there can also be significant local fluctuations of the baryon number, strangeness, and electric charge densities about zero, perturbatively corresponding to the production of quark/antiquark pairs. These previously ignored local charge fluctuations can permit the study of charge diffusion in the quark-gluon plasma (QGP), even at top collider energies. In this paper we present a new model denoted ICCING (initial conserved charges in nuclear geometry) which can reconstruct the initial conditions of conserved charges in the QGP by sampling a (g→q¯q) splitting probability over the initial energy density. We find that the new charge distributions generally differ from the bulk energy density; in particular, the strangeness distribution is significantly more eccentric than standard bulk observables and appears to be associated with the geometry of hot spots in the initial state. The new information provided by these conserved charges opens the door to studying a wealth of new charge- and flavor-dependent correlations in the initial state and ultimately the charge transport parameters of the QGP.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Adsorption and exchange reactions of iodine molecules at the alumina surface: modelling alumina-iodine reaction mechanisms

Harnessing aluminum oxidation energy requires navigating the particle's passivation shell composed of alumina. The shell is a barrier to aluminum oxidation but can also exothermically react with halogenated species and therefore contribute to the overall energy generated during aluminum particle combustion. Fluorination reactions with alumina have been studied because fluorine is abundant in binder formulations that commonly surround aluminum particles in an energetic mixture. However, iodine has emerged as an alternative halogenated-based binder or oxidizer because iodine gas provides ancillary benefits such as chemical neutralization of biological agents or sterilization of contaminated environments. Furthermore, this study used density functional theory (DFT) calculations to evaluate potential reaction pathways for aluminum–iodine combustion. Relative to fluorinated fragments such as HF and F – , the adsorption energies associated with HI and I– are nearly triple the exchange reaction energy available from fluorination reactions with alumina (–189 and –278 kJ mol –1 for HI and I – , respectively). However, exchange reactions between iodinated species and the alumina surface are energetically unfavorable. These results explain that through adsorption, alumina surface exothermic reactions with iodine are more energetic than with fluorine fragments. Experiments performed with differential scanning calorimetry (DSC) confirm the higher magnitude of energy generated for iodination compared with fluorination reactions with alumina. Additionally, strong adsorption energies can promote synthesis of new shell chemistries. Adsorption in solution will promote alumina dissolution and iodine precipitation reactions to produce hydroxyl complexes and iodinated species synthesized on the surface of the particle, thereby replacing alumina with alternative passivation shell chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large eddy simulation of atmospheric boundary layer flow over complex terrain in comparison with RANS simulation and on-site measurements under neutral stability condition

Large eddy simulation (LES) of the atmospheric boundary layer (ABL) flow over complex terrain is presented with a validation using meteorological tower (met-tower) data through an improved neutral stability sampling approach. The proposed stability sampling procedure includes a condition based on the most-likely occurrence time-periods of the neutral ABL and reduces the variabilities of the conditional wind statistics calculated at the met-towers in comparison to our previous work. The ABL flow simulations are carried out over a potential wind site with a prominent hill based using the OpenFOAM-based simulator for on/off-shore wind farm applications by applying the Lagrangian-averaged scale-invariant dynamic sub-grid scale turbulence model. A low-dissipative scale-selective discretization scheme for the non-linear convection term in the LES governing equation is adopted implicitly to ensure both the second-order accuracy and bounded solution. The LES inflow is generated through a precursor method with a “tiling” approach based on the flow driving parameters obtained from a corresponding Reynolds-averaged Navier–Stokes (RANS) simulation. Overall, the averaged wind velocity profiles predicted by the LES approach at all met-tower locations show a similar tendency as the RANS results, which are also in reasonable agreement with the met-tower data. An obvious difference in wind speed standard deviation profiles is seen between LES and RANS, especially at regions downstream of the hill edge, where the LES shows under-predicted results at the highest measurement levels in comparison to the tower data. The computational costs of the LES are found to be about 20 times higher than the RANS simulations.

Energy & Fuels↗

Trust in News as Moderated by Known Truth Assessments and Source

Disinformation has become a problem in various spaces, from social media to organizations. Given the lack of evidence and transparency surrounding organizational disinformation, we aim to understand issue of information exposure effect and source trust from the lens of traditional information consumption online. Using an online experiment and multi-level mixed-effects modeling, we find that the exposure effect exists even over only two exposures to a headline, as long as participants are not shown fact-checking. Fact-checking can be effective in reducing the impact of the exposure effect. Additionally, we find that participants trusted sources significantly more before seeing the headlines. The possible presence of disinformation reduces trust in sources, even when considered highly neutral and reputable. These findings can inform simulations of agent interactions with misinformation as well as future experimental designs focused on evaluations of belief and trust based on recognizability of a source.

99 GENERAL AND MISCELLANEOUS↗

Theoretical Pathway toward Improved Reverse Osmosis Membrane Selectivity for Neutral Solutes: Inspiration from Gas Separations

We report highly rigid membrane materials with tailored structures have exhibited permeabilities and selectivities that exceed the polymer upper bound in gaseous and organic solvent separations for challenging mixtures containing species that are similar in size and shape. One potential question is whether such membrane materials can maintain meaningful guest diffusivities in situations where the microporous spaces are essentially full of guest molecules. Here, we use a simplified transition state theory approach to estimate the diffusivity of water and small organics within a microporous membrane. The transition state theory model is parameterized using experimental values from zeolites and carbon molecular sieve materials found in the literature. We demonstrate the differences in transport and Maxwell–Stefan diffusivities based on guest species loading with different isotherm behaviors. These calculations theorize a path forward for highly selective reverse osmosis membranes for aqueous phase separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗