Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “linear constraints”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Application of multivariable search techniques to structural design optimization

Multivariable optimization techniques are applied to a particular class of minimum weight structural design problems: the design of an axially loaded, pressurized, stiffened cylinder. Minimum weight designs are obtained by a variety of search algorithms: first- and second-order, elemental perturbation, and randomized techniques. An exterior penalty function approach to constrained minimization is employed. Some comparisons are made with solutions obtained by an interior penalty function procedure. In general, it would appear that an interior penalty function approach may not be as well suited to the class of design problems considered as the exterior penalty function approach. It is also shown that a combination of search algorithms will tend to arrive at an extremal design in a more reliable manner than a single algorithm. The effect of incorporating realistic geometrical constraints on stiffener cross-sections is investigated. A limited comparison is made between minimum weight cylinders designed on the basis of a linear stability analysis and cylinders designed on the basis of empirical buckling data. Finally, a technique for locating more than one extremal is demonstrated.

Jones, R. T.↗

Selection of a seventh spectral band for the LANDSAT-D thematic mapper

The author has identified the following significant results. Each of the candidate bands were examined in terms of the feasibility of gathering high quality imagery from space while taking into account solar illumination, atmospheric attenuation, and the signal/noise ratio achievable within the TM sensor constraints. For the 2.2 micron region and the thermal IR region, inband signal values were calculated from representative spectral reflectance/emittance curves and a linear discriminant analysis was employed to predict classification accuracies. Based upon the substantial improvement (from 78 t0 92%) in discriminating zones of hydrothermally altered rocks from unaltered zones, over a broad range of observation conditions, a 2.08-2.35 micron spectral band having a ground resolution of 30 meters was recommended.

Holmes, Q. A.↗

Control Augmented Structural Synthesis

A methodology for control augmented structural synthesis is proposed for a class of structures which can be modeled as an assemblage of frame and/or truss elements. It is assumed that both the plant (structure) and the active control system dynamics can be adequately represented with a linear model. The structural sizing variables, active control system feedback gains and nonstructural lumped masses are treated simultaneously as independent design variables. Design constraints are imposed on static and dynamic displacements, static stresses, actuator forces and natural frequencies to ensure acceptable system behavior. Multiple static and dynamic loading conditions are considered. Side constraints imposed on the design variables protect against the generation of unrealizable designs. While the proposed approach is fundamentally more general, here the methodology is developed and demonstrated for the case where: (1) the dynamic loading is harmonic and thus the steady state response is of primary interest; (2) direct output feedback is used for the control system model; and (3) the actuators and sensors are collocated.

Lust, Robert V.↗

Optimal input design for aircraft parameter estimation using dynamic programming principles

A new technique was developed for designing optimal flight test inputs for aircraft parameter estimation experiments. The principles of dynamic programming were used for the design in the time domain. This approach made it possible to include realistic practical constraints on the input and output variables. A description of the new approach is presented, followed by an example for a multiple input linear model describing the lateral dynamics of a fighter aircraft. The optimal input designs produced by the new technique demonstrated improved quality and expanded capability relative to the conventional multiple input design method.

Klein, Vladislav↗

Optimal Input Design for Aircraft Parameter Estimation using Dynamic Programming Principles

A new technique was developed for designing optimal flight test inputs for aircraft parameter estimation experiments. The principles of dynamic programming were used for the design in the time domain. This approach made it possible to include realistic practical constraints on the input and output variables. A description of the new approach is presented, followed by an example for a multiple input linear model describing the lateral dynamics of a fighter aircraft. The optimal input designs produced by the new technique demonstrated improved quality and expanded capability relative to the conventional multiple input design method.

Morelli, Eugene A.↗

Multi-Axis Independent Electromechanical Load Control for Docking System Actuation Development and Verification Using dSPACE

The development of highly complex and advanced actuation systems to meet customer demands has accelerated as the use of real-time testing technology expands into multiple markets at Moog. Systems developed for the autonomous docking of human rated spacecraft to the International Space Station (ISS), envelope multi-operational characteristics which place unique constraints on an actuation system. Real-time testing hardware has been used as a platform for incremental testing and development for the linear actuation system which controls initial capture and docking for vehicles visiting the ISS. This presentation will outline the role of dSPACE hardware as a platform for rapid control-algorithm prototyping as well as an Electromechanical Actuator (EMA) system dynamic loading simulator, both conducted at Moog to develop the safety critical Linear Actuator System (LAS) of the NASA Docking System (NDS).

Oesch, Christopher↗

TPSAS-NF1676L-21838-DND

Correlation relationships between particle microphysical parameters and optical data are investigated. The results show that surface-area concentrations and extinction coefficients are linearly correlated with a correlation coefficient above 0.99 for arbitrary particle size distribution. The correlation relationships that we obtained can be used as constraints in our inversion of optical lidar data. Simulation studies demonstrate a significant stabilization of aerosol microphysical data products if we apply the gradient correlation method (GCM) in our traditional regularization technique.

Alexei Kolgotin↗

Accelerator beam data commissioning equipment and procedures: Report of the TG-106 of the Therapy Physics Committee of the AAPM

For commissioning a linear accelerator for clinical use, medical physicists are faced with many challenges including the need for precision, a variety of testing methods, data validation, the lack of standards, and time constraints. Since commissioning beam data are treated as a reference and ultimately used by treatment planning systems, it is vitally important that the collected data are of the highest quality to avoid dosimetric and patient treatment errors that may subsequently lead to a poor radiation outcome. Beam data commissioning should be performed with appropriate knowledge and proper tools and should be independent of the person collecting the data. To achieve this goal, Task Group 106 (TG-106) of the Therapy Physics Committee of the American Association of Physicists in Medicine was formed to review the practical aspects as well as the physics of linear accelerator commissioning. The report provides guidelines and recommendations on the proper selection of phantoms and detectors, setting up of a phantom for data acquisition (both scanning and no-scanning data), procedures for acquiring specific photon and electron beam parameters and methods to reduce measurement errors (<1%), beam data processing and detector size convolution for accurate profiles. The TG-106 also provides a brief discussion on the emerging trend in Monte Carlo simulation techniques in photon and electron beam commissioning. The procedures described in this report should assist a qualified medical physicist in either measuring a complete set of beam data, or in verifying a subset of data before initial use or for periodic quality assurance measurements. By combining practical experience with theoretical discussion, this document sets a new standard for beam data commissioning.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Control of large thermal distortions in a cryogenic wind tunnel

The National Transonic Facility (NTF) is a research wind tunnel capable of operation at temperatures down to 89K (160 R) and pressures up to 900,000 Pa (9 atmospheres) to achieve Reynolds numbers approaching 120,000,000. Wide temperature excursions combined with the precise alignment requirements of the tunnel aerodynamic surfaces imposed constraints on the mechanisms supporting the internal structures of the tunnel. The material selections suitable for this application were also limited. A general design philosophy of utilizing a single fixed point for each linear degree of freedom and guiding the expansion as required was adopted. These support systems allow thermal expansion to take place in a manner that minimizes the development of thermally induced stresses while maintaining structural alignment and resisting high aerodynamic loads. Typical of the support mechanisms are the preload brackets used in the fan shroud system and the Watts linkage used to support the upstream nacelle. The design of these mechanisms along with the basic design requirements and the constraints imposed by the tunnel system are discussed.

Gustafson, J. C.↗

First constraints from marked angular power spectra with Subaru Hyper Suprime-Cam Survey First-Year Data

We present the first application of marked power spectra to weak lensing data, using maps from the Subaru Hyper Suprime-Cam Year 1 (HSC-Y1) survey. Marked convergence fields, constructed by weighting the convergence field with non-linear functions of its smoothed version, are designed to encode higher-order information while remaining computationally tractable. Using simulations tailored to the HSC-Y1 data, we test three mark functions that up- or down-weight different density environments. Our results show that combining multiple types of marked auto and cross-spectra improves constraints on the clustering amplitude parameter S8≡σ8Ωm/0.3 by ≈43 per cent compared to standard two-point power spectra. When applied to the HSC-Y1 data, this translates into a constraint on S8=0.807±0.024⁠. We assess the sensitivity of the marked power spectra to systematics, including baryonic effects, intrinsic alignment, photometric redshifts, and multiplicative shear bias. We note that some of the additional information introduced by the marked field originates from scales smaller than the scale cut, and is partly Gaussian in nature. This does not invalidate our systematic tests. These results demonstrate the promise of marked statistics as a practical and powerful tool for extracting non-Gaussian information from weak lensing surveys.

Cowell, Jessica A. [Oxford U.; Tokyo U., IPMU] (OR↗

Accurate upwind methods for the Euler equations

A new class of piecewise linear methods for the numerical solution of the one-dimensional Euler equations of gas dynamics is presented. These methods are uniformly second-order accurate, and can be considered as extensions of Godunov's scheme. With an appropriate definition of monotonicity preservation for the case of linear convection, it can be shown that they preserve monotonicity. Similar to Van Leer's MUSCL scheme, they consist of two key steps: a reconstruction step followed by an upwind step. For the reconstruction step, a monotonicity constraint that preserves uniform second-order accuracy is introduced. Computational efficiency is enhanced by devising a criterion that detects the 'smooth' part of the data where the constraint is redundant. The concept and coding of the constraint are simplified by the use of the median function. A slope steepening technique, which has no effect at smooth regions and can resolve a contact discontinuity in four cells, is described. As for the upwind step, existing and new methods are applied in a manner slightly different from those in the literature. These methods are derived by approximating the Euler equations via linearization and diagonalization. At a 'smooth' interface, Harten, Lax, and Van Leer's one intermediate state model is employed. A modification for this model that can resolve contact discontinuities is presented. Near a discontinuity, either this modified model or a more accurate one, namely, Roe's flux-difference splitting. is used. The current presentation of Roe's method, via the conceptually simple flux-vector splitting, not only establishes a connection between the two splittings, but also leads to an admissibility correction with no conditional statement, and an efficient approximation to Osher's approximate Riemann solver. These reconstruction and upwind steps result in schemes that are uniformly second-order accurate and economical at smooth regions, and yield high resolution at discontinuities.

Huynh, Hung T.↗

Learning Distributed Geometric Koopman Operator for Sparse Networked Dynamical Systems

Koopman operator theory provides an alternative to study nonlinear networked dynamical systems by mapping the state space to an abstract higher dimensional space where the system evolution is linear. Recent works show the application of graph neural networks (GNNs) to learn state to object-centric embeddings and achieve centralized block-wise computation of Koopman operator (KO) under additional assumptions on the underlying agents properties and constraints on the KO structure. However, the computational complexity of learning the Koopman increases exponentially for networked systems where the number of possible system states grows in a combinatorial fashion with the number of nodes. The learning challenge is further amplified for sparse networks by two factors: 1) sample sparsity for learning the Koopman operator in the non-linear space, and 2) the divergence in the dynamics of individual nodes or from one subgraph to another. Our work aims to address these challenge by formulating the representation learning of networked dynamical systems into a multi-agent paradigm and learning the Koopman operator in a distributive manner. The computational as well as performance advantages of distributed Koopman is predominant for sparse networks whereas for fully connected networks, it is shown to coincide with the centralized one. The empirical study on rope system, network of oscillators and a synthetic power system show comparable and superior performance along with computational benefits with the state-of-the-art methods.

Mukherjee, Sayak↗

Approximate Bayesian computation for forward modeling in cosmology

Bayesian inference is often used in cosmology and astrophysics to derive constraints on model parameters from observations. This approach relies on the ability to compute the likelihood of the data given a choice of model parameters. In many practical situations, the likelihood function may however be unavailable or intractable due to non-gaussian errors, non-linear measurements processes, or complex data formats such as catalogs and maps. In these cases, the simulation of mock data sets can often be made through forward modeling. We discuss how Approximate Bayesian Computation (ABC) can be used in these cases to derive an approximation to the posterior constraints using simulated data sets. This technique relies on the sampling of the parameter set, a distance metric to quantify the difference between the observation and the simulations and summary statistics to compress the information in the data. We first review the principles of ABC and discuss its implementation using a Population Monte-Carlo (PMC) algorithm and the Mahalanobis distance metric. We test the performance of the implementation using a Gaussian toy model. We then apply the ABC technique to the practical case of the calibration of image simulations for wide field cosmological surveys. We find that the ABC analysis is able to provide reliable parameter constraints for this problem and is therefore a promising technique for other applications in cosmology and astrophysics. Our implementation of the ABC PMC method is made available via a public code release.

79 ASTRONOMY AND ASTROPHYSICS↗

Multi-field DBI inflation: introducing bulk forms and revisiting the gravitational wave constraints

We study multi-field Dirac-Born-Infeld (DBI) inflation models, taking into account the NS-NS and R-R bulk fields present in generic flux compactifications. We compute the second-order action, which governs the behaviour of linear cosmological perturbations, as well as the third-order action, which can be used to calculate non-Gaussianities in these models. Remarkably, for scalar-type perturbations, we show that the contributions due to the various form fields exactly cancel in both the second- and third-order actions. Primordial perturbations and their non-Gaussianities are therefore unaffected by the presence of form fields and our previous results are unmodified. We also study vector-type perturbations associated with the U(1) gauge field confined on the D3-brane, and discuss whether their quantum fluctuations can be amplified. Finally, we revisit the gravitational wave constraints on DBI inflation and show that an ultra-violet DBI multi-field scenario is still compatible with data, in contrast with the single field case, provided there is a transfer from entropy into adiabatic perturbations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Information content of higher order galaxy correlation functions

The shapes of galaxy N-point correlation functions can be used as standard rulers to constrain the distance–redshift relationship. The cosmological density fields traced by late-time galaxy formation are initially nearly Gaussian, and hence, all the cosmological information can be extracted from their two-point correlation function. Subsequent non-linear evolution under gravity, as well as halo and then galaxy formation, generates higher order correlation functions. Since the mapping of the initial to the final density field is, on large scales, invertible, it is often claimed that the information content of the initial field’s power spectrum is equal to that of all the higher order functions of the final, non-linear field. This claim implies that reconstruction of the initial density field from the non-linear field renders analysis of higher order correlation functions of the latter superfluous. We show that this claim is false when the N-point functions are used as standard rulers. Constraints available from joint analysis of the two and three-point correlation functions can, in some cases, exceed those offered by the initial power spectrum. We provide a mathematical justification for this claim and demonstrate it using a large suite of N-body simulations. In particular, we show that for the z = 0 real-space matter field in the limit of vanishing shot-noise, taking modes up to k max = 0.2 h Mpc −1 , using the bispectrum alone offers a factor of 2 reduction in the variance on the cosmic distance scale relative to that available from the linear power spectrum.

79 ASTRONOMY AND ASTROPHYSICS↗

Optical polarimetry of PKS 2155 - 304 and constraints on accretion disk models for BL Lacertae objects

Optical broad-band polarimetry and photometry of the BL Lacertae object PKS 2155 - 304 during late 1990 are presented. Variability in both flux and linear polarization was moderate during this period. The optical polarization ranged from 2 to 7 percent while photometric variations were within 0.2 mag (V = 13.2-13.4). Accurate multicolor measurements were made to study any wavelength dependence of the polarization with an eye to using these data to test the model of Wandel and Urry (1991) which proposes that the UV to soft X-ray continuum of this object arises from an accretion disk. Wavelength-dependent polarization (WDP) is observed in PKS 2155 - 304. However, the polarization is always seen to decrease with wavelength when WDP is observed. This is opposite to the expected sense of WDP if the UV continuum is dominated by an accretion disk.

Smith, Paul S.↗

Power spectra based Planck constraints on compensated isocurvature, and forecasts for LiteBIRD and CORE space missions

Compensated isocurvature perturbations (CIP), where the primordial baryon and cold dark matter density perturbations cancel, do not cause total matter isocurvature perturbation. Consequently, at the linear order in the baryon density contrast Δ, a mixture of CIP and the adiabatic mode leads to the same CMB spectra as the pure adiabatic mode. Only recently, Muñoz et al. showed that at the second order CIP leaves an imprint in the observable CMB by smoothing the power spectra in a similar manner as lensing. This causes a strong degeneracy between the CIP variance Δ{sub rms}{sup 2} ≡ (Δ{sup 2}) and the phenomenological lensing parameter A {sub L}. We study several combinations of the Planck 2015 data and show that the measured lensing potential power spectrum C {sub ℓ}{sup φφ} breaks the degeneracy. Nested sampling of the ΛCDM+Δ{sub rms}{sup 2}(+ A {sub L}) model using the Planck 2015 temperature, polarization, and lensing data gives Δ{sub rms}{sup 2} = (6.9{sup +3.0}{sub −3.1}) × 10{sup −3} at 68% CL. A non-zero value is favoured at 2.3σ (or without the polarization data at 2.8σ). CIP with Δ{sub rms}{sup 2} ≈ 7 × 10{sup −3} improves the bestfit χ{sup 2} by 3.6 compared to the adiabatic ΛCDM model. In contrast, although the temperature data favour A {sub L} ≅ 1.22, allowing A {sub L} ≠ 1 does not improve the joint fit at all, since the lensing data disfavour A {sub L} ≠ 1. Indeed, CIP provides a rare example of a simple model, which is capable of reducing the Planck lensing anomaly significantly and fitting well simultaneously the high (and low) multipole temperature and lensing data, as well as the polarization data. Finally, we derive forecasts for two future satellite missions (LiteBIRD proposal to JAXA/NASA and Exploring Cosmic Origins with CORE proposal to ESA's M5 call) and compare these to simulated Planck data. Due to its coarse angular resolution, LiteBIRD is not able to improve the constraints on Δ{sub rms}{sup 2} or A {sub L}, but CORE-M5 (almost) reaches the cosmic variance limit and improves the CIP constraint to Δ{sub rms}{sup 2} < 0.6 (1.4) × 10{sup −3} at 68 (95)% CL, which is nine times better than the current trispectrum based upper bound and six times better than obtained from the simulated Planck data. In addition, CORE-M5 will exquisitely distinguish between Δ{sub rms}{sup 2} and A {sub L}. No matter whether CIP is allowed for or not, the uncertainty of the lensing parameter will be σ( A {sub L}) ≈ 0.012, in the case where the simulated data are based on the adiabatic ΛCDM model with A {sub L} = 1.

79 ASTRONOMY AND ASTROPHYSICS↗

Controlling Cation-Cation Interactions in Uranyl Coordination Dimers by Varying the Length of the Dicarboxylate Linker

The chemistry of linear uranyl(V/VI) dioxo cations, [O yl –U–O yl ] +/2+ , is dominated by coordination of uranium in the equatorial plane. Effects of this constraint were evaluated by experiment and theory for gas-phase mixed-valence U V/VI coordination dimers in which uranyl moieties are linked by alkyl dicarboxylates, [(UO 2 + )(UO 2 2+ )(OOC-(CH 2 ) n-2 -COO 2– ) 2 ] – (n = 3–12). Faster O 2 -addition to dimers with short linkers n = 3 and 4, vs. n ≥ 5, suggests a structural difference. Computed structures with the shortest linkers have bridging dicarboxylates and nearly parallel, non-interacting uranyls. Longer linkers, n = 5–7, accommodate uranyl orientations with distinct U V –U VI end-on cation-cation interactions (CCIs), whereby Lewis base O yl from U V coordinates to the acid U VI , denoted as U V O yl ···U VI . The dimer structure for n = 8 has a U V –U VI side-on diamond-shape CCI, with U V O yl ···U VI and U VI O yl ···U V interactions. Addition of O 2 to the n = 4 and 5 dimers yields [(UO22+)2(OOC-(CH2)n-2-COO2–)2(O2–)]–, with U V oxidized to U VI and O 2 reduced to O 2 – . Whereas O 2 can associate to and oxidize the exposed U V center for dimers with n = 3 and 4, the more crowded U V site in the CCI structures inhibits O 2 addition. Finally, the results demonstrate rational structural control of uranyl-uranyl bonding and reactivity in small coordination complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗