Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lifetime model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Candle Flames in Non-Buoyant Atmospheres

This paper addresses the behavior of a candle flame in a long-duration, quiescent microgravity environment both on the space Shuttle and the Mir Orbiting Station. On the Shuttle, the flames became dim blue after an initial transient where there was significant yellow (presumably soot) in the flame. The flame lifetimes were typically less than 60 seconds. The safety-mandated candlebox that contained the candle flame inhibited oxygen transport to the flame and thus limited the flame lifetime. The flames on the Mir were similar, except that the yellow luminosity persisted longer into the flame lifetime because of a higher initial oxygen concentration, The Mir flames burned for as long as 45 minutes. The difference in the flame lifetime between the Shuttle and Mir flames was primarily the redesigned candlebox that did not inhibit oxygen transport to the flame. In both environments, the flame intensity and the height-to-width ratio gradually decreased as the ambient oxygen content in the sealed chamber slowly decreased. Both sets of experiments showed spontaneous, axisymmetric flame oscillations just prior to extinction. The paper also presents a numerical model of a candle flame. The formulation is two-dimensional and time-dependent in the gas phase with constant specific heats, thermal conductivity and Lewis number (although different species can have different Lewis numbers), one-step finite-rate kinetics, and gas-phase radiative losses from CO2 and H2O. The treatment of the liquid/wick phase assumes that the, fuel evaporates from a constant diameter sphere connected to an inert cone. The model predicts a steady flame with a shape and size quantitatively similar to the Shuttle and Mir flames. The computation predicts that the flame size will increase slightly with increasing ambient oxygen mole fraction. The model also predicts pre-extinction flame oscillations if the rate of decrease in ambient oxygen is small enough, such as that which would occur for a flame burning in a sealed ambient.

Dietrich, D. L.↗
NASA NTRS2012

SO2 over Central China: Measurements, Numerical Simulations and the Tropospheric Sulfur Budget

SO2 in central China was measured in situ from an aircraft and remotely using the Ozone Monitoring Instrument (OMI) from the Aura satellite; results were used to develop a numerical tool for evaluating the tropospheric sulfur budget - sources, sinks, transformation and transport. In April 2008, measured ambient SO2 concentrations decreased from approx.7 ppbv near the surface to approx. 1 ppbv at 1800 m altitude (an effective scale height of approx.800 m), but distinct SO2 plumes were observed between 1800 and 4500 m, the aircraft's ceiling. These free tropospheric plumes play a major role in the export of SO2 and in the accuracy of OMI retrievals. The mean SO2 column contents from aircraft measurements (0.73 DU, Dobson Units) and operational OMI SO2 products (0.63+/-0.26 DU) were close. The OMI retrievals were well correlated with in situ measurements (r = 0.84), but showed low bias (slope = 0.54). A new OMI retrieval algorithm was tested and showed improved agreement and bias (r = 0.87, slope = 0.86). The Community Multiscale Air Quality (CMAQ) model was used to simulate sulfur chemistry, exhibiting reasonable agreement (r = 0.62, slope = 1.33) with in situ SO2 columns. The mean CMAQ SO2 loading over central and eastern China was 54 kT, approx.30% more than the estimate from OMI SO2 products, 42 kT. These numerical simulations, constrained by observations, indicate that ",50% (35 to 61 %) of the anthropogenic sulfur emissions were transported downwind, and the overall lifetime of tropospheric SO2 was 38+/-7 h.

He, Hao↗
NASA NTRS2014

Stationkeeping Monte Carlo Simulation for the James Webb Space Telescope

The James Webb Space Telescope (JWST) is scheduled to launch in 2018 into a Libration Point Orbit (LPO) around the Sun-Earth/Moon (SEM) L2 point, with a planned mission lifetime of 10.5 years after a six-month transfer to the mission orbit. This paper discusses our approach to Stationkeeping (SK) maneuver planning to determine an adequate SK delta-V budget. The SK maneuver planning for JWST is made challenging by two factors: JWST has a large Sunshield, and JWST will be repointed regularly producing significant changes in Solar Radiation Pressure (SRP). To accurately model SRP we employ the Solar Pressure and Drag (SPAD) tool, which uses ray tracing to accurately compute SRP force as a function of attitude. As an additional challenge, the future JWST observation schedule will not be known at the time of SK maneuver planning. Thus there will be significant variation in SRP between SK maneuvers, and the future variation in SRP is unknown. We have enhanced an earlier SK simulation to create a Monte Carlo simulation that incorporates random draws for uncertainties that affect the budget, including random draws of the observation schedule. Each SK maneuver is planned to optimize delta-V magnitude, subject to constraints on spacecraft pointing. We report the results of the Monte Carlo simulations and discuss possible improvements during flight operations to reduce the SK delta-V budget.

Stationkeepting↗
NASA NTRS2020

Mapping the Predicted Solar Wind Hydrogen Flux in Lunar South Pole Craters

The solar wind hydrogen flux is mapped onto the topography of four lunar south pole craters; Shackleton, Haworth, Shoemaker and Faustini. Using altimetry data from the Lunar Reconnaissance Orbiter, we apply an analytic plasma model to map the hydrogen flux onto the surface, time-averaged over a lunar rotation cycle. We present a series of maps including the average flux, geomagnetic modulation, and ion flow energy. These results are intended to inform further studies of dynamic lunar surface processes, such as volatile implantation, sputtering,and weathering. As an example, we also present a map of a surface ice sheet lifetime based on ion sputtering.

William M Farrell↗
NASA NTRS2021

Terra MODIS Sees Solar Eclipses: Analysis of Reflective Solar Band Response at Multiple Radiance Levels

The MODIS imaging spectroradiometer instruments on-board NASA's Terra and Aqua satellites have 20 reflective solar bands (RSB) covering a wavelength range from 400 to 2200 nm. Radiance is calculated from processing raw signals with background, temperature, and electronic contamination corrected. Measured gain is calibrated with a fully Sunlit solar diffuser (SD) at a stable radiance level, considering a slowly changing SD reflectance degradation. These measurements provide time-dependent gain adjustment factors, and the calibration assumes a linear response for each band and detector. Hence, an analysis of the dependence on different radiance levels is warranted. The MODIS design has no mechanism for varying radiance levels, except for an attenuator screen. However, it has been in static configuration for Terra since mid-2003. An external source of radiance attenuation can be utilized during solar eclipse events, while maintaining high stability and accuracy of solar calibration standards. Due to its long mission lifetime, Terra has seen several Sun-Moon near-conjunction events when it coincides with the orbit path where the SD is directly illuminated. As of August 2020, we have identified 7 viable partial solar eclipses in the Terra mission data. We will discuss several results of our study, including comparison of measured SD signal to predicted radiance reduction based on a solar disk radiance model; nominal and outlier behavior as a function of bands, detectors, and mirror-sides; and comparison with other data sets. Our main conclusion from this study is that there is no notable correlation of detector-dependent trend with radiance level for most RSB bands.

Terra↗
NASA NTRS1995

Rings of the North Brazil Current: Their structure and behavior inferred from observations and a numerical simulation

Large anticyclonic rings are shed from the retroflecting North Brazil Current (NBC) near 8 deg N in the tropical western Atlantic. New subsurface velocity and temperature measurements within three such rings are presented here and are found to be consistent with previous in situ and remotely sensed NBC ring measurements. A high-resolution numerical model of the Atlantic Ocean forced by monthly wind stress and an imposed meridional overturning cell is found to shed NBC rings that approximate those observed. The model rings are more surface-intensified than those observed and somewhat smaller in diameter. Both observed and modeled NBC rings move northwestward along the coast of South America with a speed of 8-16 cm/s, considerably slower than predicted by analytical theories describing westward ring propagation. At least 2-3 rings per year separate from the NBC retroflection. Annually, 1-3 rings translate intact from their formation region near 50 deg W to the islands of the southeastern Caribbean, where they disintegrate after a lifetime of about 100 days. This study is the first to make use of subsurface temperature and velocity data to compute the volume of the anomalous ring core. NBC rings may be responsible for 3-4 Sv of direct mass transport across the equatorial-tropical gyre boundary or 20-25% of the total upper ocean cross-gyre transport required by the Atlantic meridional overturning cell. Translating NBC rings may contribute 20% of the total meridional heat transport by the ocean at this latitude.

Fratantoni, David M.↗
NASA NTRS2002

Using TRMM Data To Understand Interannual Variations In the Tropical Water Balance

A significant element of the science rationale for TRMM centered on assembling rainfall data needed to validate climate models-- climatological estimates of precipitation, its spatial and temporal variability, and vertical modes of latent heat release. Since the launch of TRMM, a great interest in the science community has emerged for quantifying interannual variability (IAV) of precipitation and its relationship to sea-surface temperature (SST) changes. The fact that TRMM has sampled one strong warm/ cold ENSO couplet, together with the prospect for a mission lifetime approaching ten years, has bolstered this interest in these longer time scales. Variability on a regional basis as well as for the tropics as a whole is of concern. Our analysis of TRMM results so far has shown surprising lack of concordance between various algorithms in quantifying IAV of precipitation. The first objective of this talk is to quantify the sensitivity of tropical precipitation to changes in SSTs. We analyze performance of the 3A11, 3A25, and 3B31 algorithms and investigate their relationship to scattering-- based algorithms constructed from SSM/I and TRMM 85 kHz data. The physical basis for the differences (and similarities) in depicting tropical oceanic and land rainfall will be discussed. We argue that scattering-based estimates of variability constitute a useful upper bound for precipitation variations. These results lead to the second question addressed in this talk-- How do TRMM precipitation / SST sensitivities compare to estimates of oceanic evaporation and what are the implications of these uncertainties in determining interannual changes in large-scale moisture transport? We summarize results of an analysis performed using COADS data supplemented by SSM/I estimates of near-surface variables to assess evaporation sensitivity to SST. The response of near 5 W sq m/K is compared to various TRMM precipitation sensitivities. Implied moisture convergence over the tropics and its sensitivity to errors of these algorithms is discussed.

Robertson, Franklin R.↗
NASA NTRS2012

A Distributed Approach to System-Level Prognostics

Prognostics, which deals with predicting remaining useful life of components, subsystems, and systems, is a key technology for systems health management that leads to improved safety and reliability with reduced costs. The prognostics problem is often approached from a component-centric view. However, in most cases, it is not specifically component lifetimes that are important, but, rather, the lifetimes of the systems in which these components reside. The system-level prognostics problem can be quite difficult due to the increased scale and scope of the prognostics problem and the relative Jack of scalability and efficiency of typical prognostics approaches. In order to address these is ues, we develop a distributed solution to the system-level prognostics problem, based on the concept of structural model decomposition. The system model is decomposed into independent submodels. Independent local prognostics subproblems are then formed based on these local submodels, resul ting in a scalable, efficient, and flexible distributed approach to the system-level prognostics problem. We provide a formulation of the system-level prognostics problem and demonstrate the approach on a four-wheeled rover simulation testbed. The results show that the system-level prognostics problem can be accurately and efficiently solved in a distributed fashion.

Daigle, Matthew J.↗
NASA NTRS2018

Investigation of a Verification and Validation Tool with a Turbofan Aircraft Engine Application

The development of more advanced control architectures for turbofan aircraft engines can yield gains in performance and efficiency over the lifetime of an engine. However, the implementation of these increasingly complex controllers is contingent on their ability to provide safe, reliable engine operation. Therefore, having the means to verify the safety of new control algorithms is crucial. As a step towards this goal, CoCoSim, a publicly available verification tool for Simulink, is used to analyze C-MAPSS40k, a 40,000 lbf class turbo-fan engine model developed at NASA for testing new control algorithms. Due to current limitations of the verification software, several modifications are made to C-MAPSS40k to achieve compatibility with CoCoSim. Some of these modifications sacrifice fidelity to the original model. Several safety and performance requirements typical for turbofan engines are identified and constructed into a verification framework. Preliminary results using an industry standard baseline controller for these requirements are presented. While verification capabilities are demonstrated, a truly comprehensive analysis will require further development of the verification tool.

V&↗
NASA NTRS1998

Modelling the Diversity of Outer Planetary Systems

The process of planetary growth is extremely complicated, involving a myriad of physical and chemical processes, many of which are poorly understood. The ultimate configuration that a planetary system attains depends upon the properties of the disk out of which it grew, of the star at the center of the disk and, at least in some cases, of the interstellar environment. In an effort to numerically survey the possible diversity of planetary systems, we have constructed synthetic systems of giant planets and integrated their orbits to determine the dynamical lifetimes and thus the viability of these systems. Our construction algorithm begins with 110 -- 180 planetesimals located between 4 and 40 AU from a one solar mass star; most initial planetesimals have masses several tenths that of Earth. We integrate the orbits of these bodies subject to mutual gravitational perturbations and -as drag for 10(exp 6) - 10(exp 7) years, merging any pair of planetesimals which pass within one-tenth of a Hill Sphere of one another and adding "gas" to embryos larger than 10 Earth masses. Use of such large planetesimal radii provided sufficient damping to prevent the system from excessive dynamical heating. Subsequently, systems were evolved without gas drag, either with the enlarged radii or with more realistic radii. Systems took from a few million years to greater than ten billion years to become stable (10(exp 9) years without mergers of ejections). Some of the systems produced with the enlarged radii closely resemble our outer Solar System. Many systems contained only Uranus-mass objects. Encounters in simulations using realistic radii resulted in ejections, typically leaving only a few planets per system, most of which were on very eccentric orbits. Some of the systems that we constructed were stable for at least a billion years despite undergoing macroscopic orbital changes on much shorter timescales.

Lissauer, Jack J.↗
NASA NTRS1977

Coronal plasma parameters in a long-duration X-ray event observed by Skylab

Physical conditions in the solar coronal X-ray-emitting plasma are analyzed for an event observed by the S-056 X-ray telescope on Skylab in August 1973. The event was located at the west limb and consisted of a series of high looplike structures that underwent dramatic changes in structure and intensity for more than 50 hours. A total X-ray energy (8 to 20 A) of about 5 by 10 to the 28th power erg is obtained by integrating over the lifetime and is shown to be equivalent to that reported previously for a 'typical' flare. It is found that a first major peak in total X-ray flux and thermal energy density was due to an increase in temperature, a major secondary peak in these parameters corresponded to the time of maximum in density, and conductivity energy losses near maximum intensity were much greater than radiative losses. Models dealing with sources of heating and energy balance are evaluated.

Vorpahl, J. A.↗
NASA NTRS1986

A dynamically based transport parameterization for one-dimensional photochemical models of the stratosphere

The net vertical tracer flux in the stratosphere is due primarily to advection by the global-scale mean meridional circulation, not to diffusion by turbulent eddies. Using a simple model of this circulation, it is shown that the net flux can be approximated by a flux-gradient relationship in which the vertical 'eddy transport' coefficient is proportional to the square of the diabatic heating rate and inversely proportional to the rate at which meridional tracer gradients are destroyed by horizontal eddy mixing and chemical damping. Thus the transport coefficient will differ for tracers with differing chemical lifetimes. Profiles computed for various source gases (CH4 N2O, CF2Cl2, and CFCl3) show that this parameterization provides an improvement over conventional formulations that utilize a single transport coefficient for all species.

Holton, J. R.↗
NASA NTRS1997

Application of High Resolution Topography and Remote Sensing: Imagery to the Kinematics of Fold-and-Thrust Belts

This report summarizes one year of funding for NASA contract NAGW-3691, Application of High Resolution Topography and Remote Sensing: Imagery to the Kinematics of Fold-and-Thrust Belts. I never received year three from NASA. The funds were to support on going tectonic and topographic studies along the front of the central Transverse Ranges and expand the topographic studies to the north. Below are results from the first two years of actual funds that I received from NASA (see attached Federal Cash Transaction Reports). The main focus of this contract was to define and understand the major tectonic processes affecting the formation and evolution of the topography in convergent tectonic settings. The results will be used to test ongoing space-based geodetic measurements and will be compared with present-day seismicity in the central Transverse Ranges and adjacent basins. Two major factors that controls topography in active regions are (1) tectonic uplift due to fault-normal compression and (2) subsequent erosion. The central Transverse and Temblor Ranges are excellent regions for these focused topographic studies. The tectonic processes leading to the mountain building are relatively straightforward and thus are easy to model. Available evidence suggests that the topography in this region is relatively young, - 3.5 Ma or less. In addition,, erosional processes may be relatively easier to model compared to larger and more ancient mountain belts. For example, in larger mountain belts, topographic relief may cause significant orographic effects and high elevation may result in part of the topography located above snowline. Both factors complicate interpretation of erosional processes that may be controlled by elevation. Mountain ranges that are significantly older may have experienced a much wider variety of erosional or climatic conditions over their lifetime. While erosion rates have certainly not been consistent in the Transverse or Temblor ranges over its 3.5 Ma lifetime, we are sure that the region was spared the Pleistocene glaciation that affected parts of the Sierra Nevada Range.

Rubin, Charles↗
NASA NTRS2004

The Influence of the Several Very Large Solar Proton Events in Years 2000-2003 on the Neutral Middle Atmosphere

Solar proton events (SPEs) are known to have caused changes in constituents in the Earth's neutral middle atmosphere. The highly energetic protons produce ionizations, excitations, dissociations, and dissociative ionizations of the background constituents, which lead to the production of HOx (H, OH, HO2) and NOy (N, NO, NO2, NO3, N2O5, HNO3, HO2NO2, ClONO2, BrONO2). The HOx increases lead to short-lived ozone decreases in the mesosphere and upper stratosphere due to the short lifetimes of the HOx constituents. The NOy increases lead to long-lived stratospheric ozone changes because of the long lifetime of the NOy family in this region. The past four years, 2000-2003, have been replete with SPEs and huge fluxes of high energy protons occurred in July and November 2000, September and November 2001, April 2002, and October 2003. Smaller, but still substantial, proton fluxes impacted the Earth during other months from year 2000 to 2003. The Goddard Space Flight Center (GSFC) Two-dimensional (2D) Model was used in computing the influence of the SPEs. The impact of these extremely large SPEs was calculated to be especially large in the upper stratosphere and mesosphere. The results of the GSFC 2D Model will be shown along with comparisons to the Upper Atmosphere Research Satellite (UARS) Halogen Occultation Experiment (HALOE) and Solar Backscatter Ultraviolet 2 (SBUV/2) instruments.

Jackman, Charles H.↗
NASA NTRS2007

Accounting for Uncertainties in Strengths of SiC MEMS Parts

A methodology has been devised for accounting for uncertainties in the strengths of silicon carbide structural components of microelectromechanical systems (MEMS). The methodology enables prediction of the probabilistic strengths of complexly shaped MEMS parts using data from tests of simple specimens. This methodology is intended to serve as a part of a rational basis for designing SiC MEMS, supplementing methodologies that have been borrowed from the art of designing macroscopic brittle material structures. The need for this or a similar methodology arises as a consequence of the fundamental nature of MEMS and the brittle silicon-based materials of which they are typically fabricated. When tested to fracture, MEMS and structural components thereof show wide part-to-part scatter in strength. The methodology involves the use of the Ceramics Analysis and Reliability Evaluation of Structures Life (CARES/Life) software in conjunction with the ANSYS Probabilistic Design System (PDS) software to simulate or predict the strength responses of brittle material components while simultaneously accounting for the effects of variability of geometrical features on the strength responses. As such, the methodology involves the use of an extended version of the ANSYS/CARES/PDS software system described in Probabilistic Prediction of Lifetimes of Ceramic Parts (LEW-17682-1/4-1), Software Tech Briefs supplement to NASA Tech Briefs, Vol. 30, No. 9 (September 2006), page 10. The ANSYS PDS software enables the ANSYS finite-element-analysis program to account for uncertainty in the design-and analysis process. The ANSYS PDS software accounts for uncertainty in material properties, dimensions, and loading by assigning probabilistic distributions to user-specified model parameters and performing simulations using various sampling techniques.

Nemeth, Noel↗
NASA NTRS2010

Improving the Operations of the Earth Observing One Mission via Automated Mission Planning

We describe the modeling and reasoning about operations constraints in an automated mission planning system for an earth observing satellite - EO-1. We first discuss the large number of elements that can be naturally represented in an expressive planning and scheduling framework. We then describe a number of constraints that challenge the current state of the art in automated planning systems and discuss how we modeled these constraints as well as discuss tradeoffs in representation versus efficiency. Finally we describe the challenges in efficiently generating operations plans for this mission. These discussions involve lessons learned from an operations model that has been in use since Fall 2004 (called R4) as well as a newer more accurate operations model operational since June 2009 (called R5). We present analysis of the R5 software documenting a significant (greater than 50%) increase in the number of weekly observations scheduled by the EO-1 mission. We also show that the R5 mission planning system produces schedules within 15% of an upper bound on optimal schedules. This operational enhancement has created value of millions of dollars US over the projected remaining lifetime of the EO-1 mission.

Chien, Steve A.↗
NASA NTRS1976

Thermal control of the International Ultraviolet Explorer

The International Ultraviolet Explorer (IUE) is a large astronomical observatory scheduled to be placed in a three-axis stabilized synchronous orbit in the fourth quarter of 1977. The thermal control system consists of multilayer insulation, ammonia-filled grooved heat pipes, bimetallic actuated louvers, and assorted commandable heaters. The spacecraft must operate over a 135-deg solar aspect range and must be able to survive an 85-min.-zero power eclipse. It has a design lifetime of three years. To verify the thermal design, an Engineering Test Unit (ETU) was subjected to a thermal balance test in the Solar Environment Simulator (SES) at the Goddard Space Flight Center (GSFC). Heater skins were utilized to simulate four solar aspect angles, and various internal power settings were used to simulate different operational cases. Temperatures obtained corresponded within 5C of predicted values, thus verifying the thermal analytical model. In addition, two 85-min.-eclipse periods were successfully completed verifying that the thermal design of the IUE was adequate for this mission requirement.

Skladany, J. T.↗