Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “kinetic stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A flexible gyro-fluid system of equations

Gyro-fluid equations are velocity space moments of the gyrokinetic equations. Special gyro-Landau-fluid closures have been developed that include the damping due to kinetic resonances by fitting to the collisionless local plasma response functions. This damping allows for accurate linear eigenmodes to be computed with a relatively low number of velocity space moments compared to the number of velocity quadrature points in gyrokinetic codes. However, none of the published gyro-Landau-fluid closure schemes considers the Onsager symmetries of the resulting quasi-linear fluxes as a constraint. Onsager symmetry guarantees that the matrix of diffusivities is positive definite, an important property for the numerical stability of a transport solver. A two-parameter real closure for improving the accuracy of low-resolution gyro-fluid equations, which preserves the Onsager symmetry and allows higher velocity space moments, is presented in this paper. The new linear gyro-fluid system (GFS) is used to extend the TGLF quasi-linear transport model so that it can compute the energy and momentum fluxes due to parallel magnetic fluctuations, completing the transport matrix. The GFS equations do not use a bounce average approximation. The GFS equations are fully electromagnetic with general flux surface magnetic geometry, pitch angle scattering for electron collisions, and subsonic equilibrium toroidal rotation. Using GFS eigenmodes in the quasi-linear TGLF model will be shown to yield a more accurate match to fluxes computed by CGYRO turbulence simulations. In conclusion, prospects for future applications of a quasi-linear theory to new plasma transport regimes and magnetic confinement devices in addition to tokamaks are opened by the flexibility of the GFS eigensolver.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Optimization of the compositions of polyanionic sodium-ion battery cathode NaFe 2-x V x (PO 4 )(SO 4 ) 2

Sodium (Na) super ionic conductor (NASICON) polyanionic compounds have recently attracted much attention from the battery community because of their electroactive properties and reasonably high ionic conductivities, leading to their use as a cathode in sodium-ion batteries. This article describes the compositional optimizations, crystallographic evaluations, and electrochemical behavior of a new mixed NASICON polyanionic compound, NaFe 2-x V x (PO 4 )(SO 4 ) 2 . By doping the characteristic Fe 3+ sites of the FeO 6 octahedrons with varying amounts of V 3+ , the electrochemical stability and charge transport in NaFe 2 (PO 4 )(SO 4 ) 2 were enhanced. The resulting best composition, with crystal structure NaFe 1.4 V 0.6 (PO 4 )(SO 4 ) 2 resolved through the Rietveld method, exhibited a stable capacity compared with the other synthesized compositions. In situ powder x-ray diffraction measurements, a single-phase intercalation/deintercalation mechanism of the NASICON structure in the measured sodium concentration window was observed with no impurity phase formation. Further electrochemical assessments revealed the interfacial charge transfer kinetics to be the rate-limiting step in the sodium concentration window. Also, the measured sodium-ion diffusivity values in the range of 6 × 10 -11 to 7 × 10 -11 cm 2 /s in the measured sodium concentration range. The results reported here highlight the potential of compositionally and morphologically optimized NaFe 1.4 V 0.6 (PO 4 )(SO 4 ) 2 with higher particle surface areas as a cathode material for high-performance sodium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Radial electric field and density fluctuations measured by Doppler reflectometry during the post-pellet enhanced confinement phase in W7-X

Radial profiles of density fluctuations and the radial electric field, Er, have been measured using Doppler reflectometry during the post-pellet enhanced confinement phase achieved, under different heating power levels and magnetic configurations, during the 2018 W7-X experimental campaign. A pronounced Er-well is measured with local values as high as -40 kV m -1 in the radial range ρ ~ 0.7–0.8 during the post-pellet enhanced confinement phase. The maximum Er intensity scales with both the plasma density and electron cyclotron heating power level, following a similar trend to the plasma energy content. A good agreement is found when the experimental Er profiles are compared to simulations carried out using the neoclassical codes, the drift kinetic equation solver (DKES) and kinetic orbit-averaging solver for stellarators (KNOSOS). The density fluctuation level decreases from the plasma edge toward the plasma core and the drop is more pronounced in the post-pellet enhanced confinement phase than in reference gas-fuelled plasmas. Besides, in the post-pellet phase, the density fluctuation level is lower in the high iota magnetic configuration than in the standard one. Therefore, to determine whether this difference is related to the differences in the plasma profiles or to the stability properties of the two configurations, gyrokinetic simulations have been carried out using the codes stella and EUTERPE. The simulation results point to the plasma profile evolution after the pellet injection and the stabilization effect of the radial electric field profile as the dominant players in the stabilization of the plasma turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Neutrino fast flavor oscillations with moments: Linear stability analysis and application to neutron star mergers

Providing an accurate modeling of neutrino physics in dense astrophysical environments such as binary neutron star mergers presents a challenge for hydrodynamic simulations. Nevertheless, understanding how flavor transformation can occur and affect the dynamics, the mass ejection, and the nucleosynthesis will need to be achieved in the future. Computationally expensive, large-scale simulations frequently evolve the first classical angular moments of the neutrino distributions. By promoting these quantities to matrices in flavor space, we develop a linear stability analysis of fast flavor oscillations using only the first two “quantum” moments, which notably requires generalizing the classical closure relations that appropriately truncate the hierarchy of moment equations in order to treat quantum flavor coherence. After showing the efficiency of this method on a well-understood test situation, we perform a systematic search of the occurrence of fast flavor instabilities in a neutron star merger simulation. Here, we discuss the successes and shortcomings of moment linear stability analysis, as this framework provides a time-efficient way to design and study better closure prescriptions in the future.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Lowering the Impedance of Lanthanum Strontium Manganite-Based Electrodes with Lanthanum Oxychloride and Lanthanum Scavenging Chloride Salts

The impact of infiltrating chloride salts on the electrochemical behavior of lanthanum strontium manganite-yttria stabilized zirconia (LSM-YSZ) cathodes was investigated under solid oxide fuel cell operation. Infiltrating a lanthanum chloride solution resulted in the formation of a lanthanum oxychloride (LaOCl) phase. A LaOCl phase also formed by infiltrating an ammonium chloride solution; however, lanthanum was scavenged from the LSM phase to form LaOCl. The third infiltrating solution, a combination of zirconium chloride and yttrium nitrate, formed LaOCl by scavenging lanthanum from LSM and produced YSZ nanoparticles. Electrochemical impedance spectroscopy results suggest that LaOCl improves oxygen adsorption kinetics compared to a baseline LSM-YSZ cathode, reducing the low frequency impedance by 30%. In addition, scavenging lanthanum from LSM improved oxygen ion diffusion polarization as indicated by the observed 40% reduction in high frequency impedance and improved serial ohmic resistance by 19%. Finally, YSZ nanoparticles further reduced the high frequency impedance and ohmic resistance by 45% and 23%, respectively. The findings reveal new strategies for lowering the impedance of LSM-YSZ cathodes.

Taylor, Thomas H.↗
DOE OSTI2023

FWP FEAA149: “Next Generation Environmental Barrier Coatings”

Environmental barrier coatings (EBCs) are required coatings for utilization of SiC/SiC ceramic matrix composite (CMC) components in gas turbines, where the EBC represents the life-limiting factor for such components. EBC/CMC systems have shown success in aero-engine applications with increased turbine inlet temperatures and improved efficiencies, which are achieved through higher temperature stability, lower density, and decreased reliance on cooling air compared to traditional superalloys. While industrial gas turbines (IGTs) do not currently utilize SiC/SiC CMCs, the current shift towards low-carbon or carbon-free fuel sources for power generation could result in a need for EBC/CMC components with higher temperature capabilities. In this work, three tasks were outlined to improve understanding of EBC lifetimes to encourage use in IGTs with carbon-free fuel such as hydrogen: 1. Define the bond coating oxidation kinetics and EBC failure criteria, 2. Measure thermal expansion coefficients of each layered material, and 3. Perform advanced characterization and modeling to assess EBC lifetimes. Cyclic steam oxidation tests were conducted on various EBC/Si/SiC chemistries and EBC/SiC architectures to define substrate oxidation kinetics and EBC failure modes. An open-source code was developed to quantify the undulating thermally grown oxide thickness with thousands of measurements from specimen cross-section images. Bond coating oxidation kinetics were determined and used to develop a kinetic and thermodynamic model for predicting EBC lifetimes. High-temperature Raman spectroscopy was utilized for determining the SiO 2 thermally grown oxide phase transformation as the life-limiting feature for EBCs. Model efforts supported the claim that the SiO 2 phase transformation causes elevated stress during thermal cycling with associated cracking that decreases the adhesion strength of the EBC, eventually resulting in coating spallation. The finite element model subroutine will be made publicly available upon internal review. Further development of an EBC lifetime model for IGTs involves definition of a critical SiO 2 thickness for EBC spallation and must also consider both environmental (gas velocity, pressure, etc.) and specimen (EBC dopants, layer architectures, etc.) effects into predicted bond coating oxidation kinetics for long-lifetime components.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electron Configuration Modulation Induced Stabilized 1T-MoS 2 for Enhanced Sodium Ion Storage

1T-MoS 2 has become an ideal anode for sodium-ion batteries (SIBs). However, the metastable feature of 1T-MoS 2 makes it difficult to directly synthesize under normal conditions. In addition, it easily transforms into 2H phase via restacking, resulting in inferior electrochemical performance. Here, the electron configuration of Mo 4d orbitals is modulated and the stable 1T-MoS 2 is constructed by nickel (Ni) introduction (1T-Ni-MoS 2 ). The original electron configuration of Mo 4d orbitals is changed via the electron injection by Ni, which triggers the phase transition from 2H to 1T phase, thus improving the electrical conductivity and accelerating the redox kinetics of the material. Consequently, 1T-Ni-MoS 2 exhibits superior rate capability (266.8 mAh g -1 at 10 A g -1 ) and excellent cycle life (358.7 mAh g -1 at 1 A g -1 after 350 cycles). In addition, the assembled Na 3 V 2 (PO 4 ) 3 /C||1T-Ni-MoS 2 full cells deliver excellent electrochemical properties and show great prospects in energy storage devices.

1T-MoS2↗
DOE OSTI2021

Predicting zeolites’ stability during the corrosion of nuclear waste immobilization glasses: Comparison with glass corrosion experiments

During the long-term corrosion of nuclear waste glasses under nuclear waste disposal conditions, the precipitation of zeolitic phases has been linked to a delayed acceleration in glass corrosion (known as “Stage III”). Hence, predicting the thermodynamic propensity for zeolites to form upon the dissolution of nuclear waste glasses is key to ensure their long-term performance. Here, we compile a unified, internally-consistent thermodynamic database “clay20” to estimate the stability of clay and feldspar phases relevant to nuclear waste immobilization glasses, including beidellite(Mg, Ca, Na, K), kaolinite, montmorillonite(Mg, Ca, Na, K), nontronite(Mg, Ca, Na, K), saponite(Ca, Na, K), and albite. Based on this, we report a geochemical modeling method allowing us to predict the stability of secondary phases (including zeolites, calcium–silicate–hydrate gels, and clays) upon the dissolution of nuclear waste immobilization glasses. We show that this approach offers a realistic description of the stability of the secondary phases forming during the dissolution of two archetypical model nuclear glasses (namely, the International Simple Glass, ISG, and WVUTh-203) under conditions relevant to nuclear waste disposal (T = 90°C, p = 1 bar) as a function of pH. We find that the formation of silica and clay secondary phases is thermodynamically favored at low pH (pH < 10), whereas, in contrast, zeolite (analcime) and calcium–silicate–hydrate phases are favored at high pH (pH > 10.5). This suggests that thermodynamics (i.e., not solely kinetics) plays a key role in determining the range of solution pH wherein stage III corrosion may occur, i.e., when zeolite formation is favored.

Zhen-Wu, Bi Yun↗
DOE OSTI2023

Poly(diallylmethylammonium) proton conducting membranes with high ionic conductivity at intermediate temperatures

High temperature proton exchange membrane fuel cells are being lately investigated because of their high energy efficiency, their superior heat/water management, CO tolerance, and electrode reaction kinetics. To further advance this technology, the polymer membrane portfolio and performance should be improved for intermediate or high temperature operation (>100 °C). In this work we present new poly(diallylmethylammonium) proton conducting membranes with high ionic conductivity at 120 °C. First, new protic ionic liquids, hereafter called DAMAH + X - , were synthesized leading to diallylmethylammonium monomers with different counter-anions. By radical cyclopolymerization through thermal and photoinitiation mechanisms, self-standing protic polymeric membranes of poly(diallylmethylammonium X - ) were obtained. Membranes showed good thermal stability (>250 °C) and mechanical properties without the need of additives such as (protic) ionic liquids, solvents or inorganic charges. Great attention was paid to understand the effect of the different counter-anions on the membrane properties. As a general trend, fluorinated anions coming from strong acids confer high ionic conductivity and allow to reduce the hygroscopic properties on the protic polymeric membranes. Proton structural and dynamical stability at different temperatures and humidification conditions were investigated by Neutron Scattering (QENS and NR). The optimized poly(diallylmethylammonium X - ) shows similar ionic conductivity values than Nafion 212 under varying relative humidity conditions at 80 °C. Furthermore, it shows a high ionic conductivity value of 1.9 × 10 -3 Scm -1 at 120 °C under dry conditions.

08 HYDROGEN↗
DOE OSTI2025

Studying the Durability of Molybdenum Carbide Aerogel as an Electrocatalyst Support for Proton Exchange Membrane Fuel Cells

Carbon-supported platinum nanoparticles (Pt/C) are currently the state-of-the-art catalyst in proton exchange membrane fuel cells (PEMFCs). Unfortunately, the carbon support lacks the ability to stabilize the metal catalyst, as platinum tends to dissolve and agglomerate, significantly compromising the durability. Herein, we synthesized a ceramic material, molybdenum carbide aerogel (MCAG), and utilized it as a Pt support for PEMFCs, as an alternative for conventional carbon supports. N 2 adsorption and XRD analysis showed that the MCAG possesses a combination of high porosity and a well-defined ceramic crystalline structure. The Pt/MCAG system was studied for its electrocatalytic activity toward ORR in a half-cell and demonstrated satisfactory reaction kinetics and electrochemical active surface area, comparable to the commercial Pt/C. For durability examination, an accelerated stress test (AST) in a single cell was conducted with the Pt/MCAG catalyst at the cathode, following the U.S. DOE electrocatalyst AST protocol. Intermediate polarization curves and cyclic voltammograms were recorded over the course of the AST to monitor the aging process. The results indicated that the MCAG support exhibited superior durability in long-term fuel cell operation compared to a carbon support. The Pt/MCAG system demonstrated stable behavior during the progressive stages of the AST, retaining more than 50% of its initial performance by the end of the test, whereas carbon-supported Pt preserved only 30%.

25 ENERGY STORAGE↗
DOE OSTI2023

Molecular Dynamics Simulations of Calcite Fracture in Water

Calcite (CaCO 3 ) is one of the most common minerals in geologic and engineered systems. It is often in contact with aqueous solutions, causing chemically assisted fracture that is critical to understanding the stability of subsurface systems and manmade structures. Calcite fracture was evaluated with reactive molecular dynamics simulations, including the impacts of crack tip geometry (notch), the presence of water, and surface hydroxyl groups. Chemo-mechanical weakening was assessed by comparing the loads where fracture began to propagate. Our analyses show that in the presence of a notch, the load at which crack growth begins is lower, compared to the effect of water or surface hydroxyls. Additionally, the breaking of two adjacent Ca–O bonds is the kinetic limitation for crack initiation, since transiently broken bonds can reform, not resulting in crack growth. In aqueous environments, fresh (not hydroxylated) calcite surfaces exhibited water strengthening. Manual addition of H + and/or OH – species on the (104) calcite surface resulted in chemo-mechanical weakening of calcite by 9%. Achieving full hydroxylation of the calcite surface was thermodynamically and kinetically limited, with only 0.17–0.01 OH/nm 2 surface hydroxylation observed on the (104) surface at the end of the simulations. In conclusion, the limited reactivity of pure water with the calcite surface restricts the chemo-mechanical effects and suggests that reactions between physiosorbed water and localized structural defects may be dominating the chemo-mechanical process in the studies where water weakening has been reported.

Calcite↗
DOE OSTI2024

Theoretical Investigation of the Hydrogenation of Cyclohexene Catalyzed by Supported Single-Atom Sites on Redox Noninnocent LiMn 2 O 4 and Li 2 Mn 2 O 4 Surfaces

Here, the tuning of catalyst activity via stereoelectronic modulation of the active-site structure remains a grand challenge in heterogeneous catalysis. In homogeneous catalysis, the redox noninnocent ligands can be introduced to organometallic fragments to donate electrons to the metal center and fine-tune the catalytic activity. Analogously, lithium-ion battery materials, such as lithium manganese oxide (LMO), lithium titanium oxides (LTO), etc., can serve as redox noninnocent catalyst support to modulate the electronic structures of the active site via lithiation, hence tuning the catalytic activity of supported active sites. Experimentally, the Ni single-atom site was supported on LiMn 2 O 4 via oxidative grafting and exhibited no catalytic activity toward the hydrogenation of cyclohexene. After introducing additional Li into the catalyst support forming Li 2 Mn 2 O 4 , the Ni single-atom site becomes active, with the catalytic rates increasing as a function of the lithiation for Li/Mn ratios >0.9. In this paper, density functional theory (DFT) calculations are performed to study the Ni site structure via X-ray absorption near edge structure (XANES) simulations and investigate the electronic properties of Ni single-atom site before and after the addition of intercalated lithium in the LMO spinel structure. Furthermore, the study of the reaction mechanism is also carried out to understand the thermodynamically and kinetically favored pathways. XANES simulation suggests that the Ni single-atom site is likely to stay in the Li channel of the spinel support structure and form an octahedral structure. After Li intercalation, the Ni site becomes less positively charged, indicating the partial reduction of the Ni site. The simulated reaction energy profile over the LiMn 2 O 4 support exhibits high-energy barriers (1.07 eV) for the hydrogenation of cyclohexene; however, the Li 2 Mn 2 O 4 support is able to better stabilize low-coordinated ion sites and improve ion mobility, leading to lower overall energy barriers (0.64 eV). The reduced and low-coordinated ion site, thus, can better stabilize the reaction intermediates and promote hydrogenation reaction. Similarly, other transition metal ions (Fe, Co, and Cu) are also considered over the LiMn 2 O 4 and Li 2 Mn 2 O 4 catalyst supports for hydrogenation reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Complexions at the iron-magnetite interface

Synthesizing distinct phases and controlling crystalline defects are key concepts in materials design. These approaches are often decoupled, with the former grounded in equilibrium thermodynamics and the latter in nonequilibrium kinetics. By unifying them through defect phase diagrams, we can apply phase equilibrium models to thermodynamically evaluate defects—including dislocations, grain boundaries, and phase boundaries—establishing a theoretical framework linking material imperfections to properties. Using scanning transmission electron microscopy (STEM) with differential phase contrast (DPC) imaging, we achieve the simultaneous imaging of heavy Fe and light O atoms, precisely mapping the atomic structure and chemical composition at the iron-magnetite (Fe/Fe 3 O 4 ) interface. We identify a well-ordered two-layer interface-stabilized phase state (referred to as complexion) at the Fe[001]/Fe 3 O 4 [001] interface. Using density-functional theory (DFT), we explain the observed complexion and map out various interface-stabilized phases as a function of the O chemical potential. The formation of complexions increases interface adhesion by 20% and alters charge transfer between adjacent materials, impacting transport properties. Our findings highlight the potential of tunable defect-stabilized phase states as a degree of freedom in materials design, enabling optimized corrosion protection, catalysis, and redox-driven phase transitions, with applications in materials sustainability, efficient energy conversion, and green steel production.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Examining transport and integrated modeling predictive capabilities for negative-triangularity scenarios

This paper investigates the predictive capabilities of TGYRO and TGLF models in assessing the performance of negative triangularity (NT) plasmas compared to positive triangularity (PT) plasmas in fusion devices. TGYRO predicts kinetic profiles, while TGLF analyzes turbulent transport. The study reveals that TGYRO reasonably predicts NT profiles similar to PT, although it overpredicts the high-power scenarios where there is increased experimental MHD activity. TGLF analysis finds reduced linear growth rates in NT and altered flux spectra relative to PT. Additionally, the TGLF SAT0 saturation model is observed to predict high-k transport and a reduction of particle transport with the electron temperature gradient. These findings are further corroborated by core-pedestal modeling using the Stability Transport Equilibrium Pedestal workflow, showing stronger confinement improvements in NT, particularly at higher power densities for the SAT0 saturation model. Furthermore, the study underscores the importance of accurately capturing turbulence saturation mechanisms for NT in order to project its performance accurately in fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Accurate Kohn-Sham auxiliary system from the ground-state density of solids

The Kohn-Sham (KS) system is an auxiliary system whose effective potential is unknown in most cases. It is in principle determined by the ground-state density and it has been found numerically for some low-dimensional systems by inverting the KS equations starting from a given accurate density. For solids, only approximate results are available. In this work, we determine accurate exchange-correlation (xc) potentials for Si and NaCl using the ground-state densities obtained from auxiliary field quantum Monte Carlo calculations. We show that these xc potentials can be rationalized as an ensemble of a few local functions of the density, whose form depends on the specific environment and can be well characterized by the gradient of the density and the local kinetic energy density. Further, the KS band structure can be obtained with high accuracy. The true KS band gap turns out to be larger than the prediction of the local density approximation, but significantly smaller than the measurable photoemission gap, which confirms previous estimates. Finally, our findings show that the conjecture that very different xc potentials can lead to very similar densities and other KS observables is true also in solids, which questions the meaning of details of the potentials and, at the same time, confirms the stability of the KS system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Epitaxial 2D Magnet and Topological Insulator Heterostructures

I will discuss our latest advances on the epitaxial growth of 2D van der Waals (vdW) magnets and their integration with topological insulators (TI). This work is motivated by the realization of topological phases such as the quantum anomalous Hall effect and highly efficient spin-orbit torque produced by TIs. Our initial studies of MnSe2 growth on Bi2Se3 showed a tendency for the interdiffusion of Mn into the Bi2Se3. This ultimately led to the synthesis of MnBi2Se4 (MBS), a new magnetic TI. Interestingly, the vdW phase is not the thermodynamically stable phase and bulk crystals do not exist, so the epitaxial stabilization of MBS creates the opportunity to explore the magnetic and topological properties of this material. We find that MBS is a layered antiferromagnet, similar to MnBi2Te4, but a difference is that the magnetic moments lie in the plane of the film. Angle resolved photoemission experiments show the presence of a topological surface state with Dirac dispersion. For bilayers of 2D magnets and TIs, we have developed FGT films on Bi2Te3. We first optimized FGT by studying its growth on Ge(111) substrates, where we find that kinetic considerations play a major role. Using cross-sectional scanning transmission electron microscopy and scanning tunneling microscopy, we optimize the FGT films to have atomically smooth surfaces and abrupt interfaces with the Ge(111). Subsequently, we have developed the growth of FGT on Bi2Te3 for the integration of 2D magnets with Tis. Interestingly, we observe room temperature ferromagnetism in FGT/Bi2Te3 heterostructures by varying the growth conditions.

Kawakami, Roland↗
DOE OSTI2021

Two human antibodies to a meningococcal serogroup B vaccine antigen enhance binding of complement Factor H by stabilizing the Factor H binding site

Microbial pathogens bind host complement regulatory proteins to evade the immune system. The bacterial pathogen Neisseria meningitidis, or meningococcus, binds several complement regulators, including human Factor H (FH). FH binding protein (FHbp) is a component of two licensed meningococcal vaccines and in mice FHbp elicits antibodies that inhibit binding of FH to FHbp, which defeat the bacterial evasion mechanism. However, humans vaccinated with FHbp develop antibodies that enhance binding of FH to the bacteria, which could limit the effectiveness of the vaccines. In the present study, we show that two vaccine-elicited antibody fragments (Fabs) isolated from different human subjects increase binding of complement FH to meningococcal FHbp by ELISA. The two Fabs have different effects on the kinetics of FH binding to immobilized FHbp as measured by surface plasmon resonance. The 1.7- and 2.0-Å resolution X-ray crystal structures of the Fabs in complexes with FHbp illustrate that the two Fabs bind to similar epitopes on the amino-terminal domain of FHbp, adjacent to the FH binding site. Superposition models of ternary complexes of each Fab with FHbp and FH show that there is likely minimal contact between the Fabs and FH. Collectively, the structures reveal that the Fabs enhance binding of FH to FHbp by altering the conformations and mobilities of two loops adjacent to the FH binding site of FHbp. In addition, the 1.5 Å-resolution structure of one of the isolated Fabs defines the structural rearrangements associated with binding to FHbp. The FH-enhancing human Fabs, which are mirrored in the human polyclonal antibody responses, have important implications for tuning the effectiveness of FHbp-based vaccines.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Bipolar Membranes for Ion Management in (Photo)Electrochemical Energy Conversion

Conspectus (Photo)electrochemical energy conversion is important in the development of a carbon-neutral energy economy because it can provide a pathway for mitigating the intermittency of renewable energy sources such as wind and solar. In order to operate efficiently, these technologies, which include photoelectrochemical cells, water and CO 2 electrolyzers, fuel cells, and redox flow batteries, require fast charge transfer kinetics at the electrode/electrolyte interface as well as robust ion management in the electrolyte. In conventional electrolyzers and fuel cells, the electrolyte is strongly acidic or basic and ionic current is carried by H + or OH – ions. In contrast, photoelectrodes and electrocatalysts for water splitting are often studied in buffered solutions. The question of ion balance in these systems led us to analyze the polarization losses due to ion concentration gradients in cells that employed various buffer–membrane combinations. Continuously driving the buffer ions across an ionomer membrane not only lowers the buffer capacity of an aqueous electrolyte but also introduces pH gradients that result in significant energy losses. To address the problem, we and other groups have studied the use of reverse-biased bipolar membranes (BPMs) in (photo)electrolytic cells. BPMs consist of an anion exchange layer (AEL) laminated with a cation exchange layer (CEL) and are usually equipped with a catalytic layer in between to accelerate the water dissociation reaction. At the AEL/CEL interface, water dissociates into protons and hydroxide ions, which replenish those consumed at the cathode and anode. Compared to conventional water electrolyzers with proton/anion exchange membranes (PEM/AEM), BPM electrolyzers provide the unique advantage of continuously operating the cathode and anode under different pH conditions, which is desirable when the two electrode reactions have different pH requirements. BPMs also enable the use of buffered electrolytes at pH values that are optimized for electrode stability and product selectivity in applications such as CO 2 electrolysis. Product crossover losses and CO 2 pumping can be dramatically reduced in BPM-based CO 2 electrolyzers, relative to conventional alkaline membranes, by electrostatic repulsion (of anionic products) and electroosmotic drag (for neutral products). BPM-based gas fed CO 2 electrolyzers can achieve high current density, but they suffer from low Faradaic efficiency (FE) due to the acidic local environment of the CEL. This problem can be mitigated by adding an aqueous buffering layer or by creating a weak acid cation exchange film on the CEL face of the membrane. The use of BPMs in fuel cells and redox flow batteries offers some interesting advantages. Configurations with both reverse and forward bias have been studied, but forward bias has been favored due to material compatibility, reaction kinetics, and thermodynamic considerations. The net reaction at the AEL/CEL interface is the acid–base neutralization reaction, which has a high inherent reaction rate constant, but in the BPM is limited to a nanometric space-charge layer and requires efficient catalysis to achieve high current density. Understanding the mechanism of the acid–base neutralization and the opposite process, the water dissociation reaction, will be essential for improving the performance of forward-biased BPMs. In conclusion, this Account reviews our current understanding of the working mechanisms of BPMs and discusses how we can use them to effectively manage ions for various (photo)electrochemical applications.

Yan, Zhifei↗