Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “joining”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Lifting at higher levels in the D1D 5 CFT

The D1D 5 P system has a large set of BPS states at its orbifold point. Perturbing away from this ‘free’ point leads to some states joining up into long supermultiplets and lifting, while other states remain BPS. We consider the simplest orbifold which exhibits this lift: that with N = 2 copies of the free c = 6 CFT. We write down the number of lifted and unlifted states implied by the index at all levels upto 6. We work to second order in the perturbation strength λ. For levels upto 4, we find the wavefunctions of the lifted states, their supermultiplet structure and the value of the lift. All states that are allowed to lift by the index are in fact lifted at order O(λ 2 ). We observe that the unlifted states in the untwisted sector have an antisymmetry between the copies in the right moving Ramond ground state sector, and extend this observation to find classes of states for arbitrary N that will remain unlifted to O(λ 2 )

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mixed field theory

We consider scalar field theory defined over a direct product of the real and p-adic numbers. An adjustable dynamical scaling exponent z enters into the microscopic lagrangian, so that the Gaussian theories provide a line of fixed points. We argue that at z = 1/3, a branch of Wilson-Fisher fixed points joins onto the line of Gaussian theories. We compute standard critical exponents at the Wilson-Fisher fixed points in the region where they are perturbatively accessible, including a loop correction to the dynamical critical exponent. We show that the classical propagator contains oscillatory behavior in the real direction, though the amplitude of these oscillations can be made exponentially small without fine-tuning parameters of the theory. Similar oscillatory behavior emerges in Fourier space from two-loop corrections, though again it can be highly suppressed. We also briefly consider compact p-adic extra dimensions, showing in non-linear, classical, scalar field theories that a form of consistent truncation allows us to retain only finitely many Kaluza-Klein modes in an effective theory formulated on the non-compact directions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Riemann-Hilbert correspondence and blown up surface defects

The relationship of two dimensional quantum field theory and isomonodromic deformations of Fuchsian systems has a long history. Recently four-dimensional N = 2 gauge theories joined the party in a multitude of roles. In this paper we study the vacuum expectation values of intersecting half-BPS surface defects in SU(2) theory with N f = 4 fundamental hypermultiplets. We show they form a horizontal section of a Fuchsian system on a sphere with 5 regular singularities, calculate the monodromy, and define the associated isomonodromic tau-function. Using the blowup formula in the presence of half-BPS surface defects, initiated in the companion paper, we obtain the GIL formula, establishing an unexpected relation of the topological string/free fermion regime of supersymmetric gauge theory to classical integrability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Environmental Management Welcomes a New Face and Reinforces Its Focus on Science-Based Stewardship

ENVIRONMENTAL MANAGEMENT is pleased to announce that Rebecca Efroymson will join Virginia Dale as Co-Editors-in-Chief of the journal. Dr. Efroymson brings extensive expertise in risk assessment and environmental toxicology. Her work has focused on land management, natural resources, water quality, and rare species, with recent work on benefits and risks of energy alternatives. ENVIRONMENTAL MANAGEMENT has been publishing research on the management and conservation of natural resources and habitats since 1976. Articles discuss implications for an international audience and examine a scientific or management hypothesis. As a premier scientific journal in applied and cross-cutting areas, articles come from a variety of disciplines including biology, botany, climatology, earth sciences, ecology, ecological economics, environmental engineering, fisheries, forest sciences, geography, information science, law, management science, politics, public affairs, social sciences, and zoology, most often in combinations determined by the interdisciplinary topic of the study. The journal strives to improve cross-disciplinary communication by making ideas and results available to environmental practitioners from other backgrounds. The goal of ENVIRONMENTAL MANAGEMENT is to present a wide spectrum of viewpoints and approaches, and to this end the journal consists of four main sections. Forum contains addresses, editorials, comments, and opinions about environmental matters. Articles in the Profile section describe and evaluate particular case histories, events, policies, problems, or organizations and their work. Papers in the Research section present the methods and findings from empirical and model-based scientific studies. The section on Environmental Assessment is for articles that cover methods of appraisal, measurement, and comparison. Generally, the debates published in the journal's Forum help construct better environmental research or policies; Research and Assessment sections foster understanding of environmental problems and usually of their solutions; and Profile articles may contribute to either aim, or both. In the event that important differences of opinion cannot be resolved between authors and referees or readers, the Forum section may be used to present a Comment on an article that has recently been published in the journal, which may be followed by the author's Reply. The journal publishes innovative research that both identifies new problems and formulates novel solutions to well-known ones. Articles are accepted from all over the world, as the international dimension is considered especially important. Research reported in the journal ranges from environmental problems that are common to a wide variety of nations to issues that are either of global concern or not limited to national boundaries. The journal provides a way for scientists to share approaches, methods, and experiences among environmental practitioners in many countries, so that the problems and opportunities of our ever more-interdependent planet may be studied in a concerted manner.

54 ENVIRONMENTAL SCIENCES↗

Compressional behavior of omphacite to 47 GPa

Omphacite is an important mineral component of eclogite. Single crystal synchrotron X-ray diffraction data on natural (Ca,Na)(Mg,Fe,Al)Si 2 O 6 omphacite have been collected at the Advanced Photon Source beamlines 13-BM-C and 13-ID-D up to 47 GPa at ambient temperature. Unit cell parameter and crystal structure refinements were carried out to constrain the isothermal equation of state and compression mechanism. The 3rd order Birch-Murnaghan equation of state (BM3) fit of all data gives V o = 423.9(3) Å3, K To = 116(2) GPa and K To ’ = 4.3(2). These elastic parameters are consistent with the general trend of the diopside-jadeite join. The eight-coordinated polyhedra (M2 and M21) are the most compressible, and contribute to majority of the unit cell compression, while the SiO 4 tetrahedra (Si1 and Si2) behave as rigid structural units and are the most incompressible. Axial compressibilities are determined by fitting linearized BM 3 equation of state to pressure dependences of unit cell parameters. Throughout the investigated pressure range, the b-axis is more compressible than the c-axis. Here, the axial compressibility of the α-axis is the largest among the three axes at 0 GPa, yet it quickly drops to the smallest at pressures above 5 GPa, which is explained by the rotation of the stiffest compression axis toward the a-axis with the increase of pressure.

36 MATERIALS SCIENCE↗

Crystal structure, thermal expansivity, and elasticity of OH-chondrodite: Trends among dense hydrous magnesium silicates

Here, we report the structure and thermoelastic properties of OH-chondrodite. The sample was synthesized at 12 GPa and 1523 K, coexisting with hydroxyl-clinohumite and hydrous olivine. The Fe content Fe/(Fe+Mg) is 1.1 mol%, and the monoclinic unit-cell parameters are: a = 4.7459(2) Å, b = 10.3480(7) Å, c = 7.9002(6) Å, α = 108.702(7)°, and V = 367.50(4) Å3. At ambient conditions the crystal structure was refined in space group P 2 1 /b from 1915 unique reflection intensities measured by single-crystal x-ray diffraction. The volume thermal expansion coefficient was measured between 150 and 800 K, resulting in α V = 2.8(5)×10 -9 (K -2 ) × T + 40.9(7) × 10 -6 (K -1 ) – 0.81(3)(K)/T 2 , with an average value of 38.0(9)×10 -6 K -1 . Brillouin spectroscopy was used to measure a set of acoustic velocities from which all thirteen components (C ij ) of the elastic tensor were determined. The Voigt-Reuss-Hill average of the moduli yield for the adiabatic bulk modulus, K S 0 = 117.9(12) GPa, and for shear modulus, G 0 = 70.1(5) GPa. The Reuss bound on the isothermal bulk modulus (K T0 ) is 114.2(14) GPa. From the measured thermodynamic properties, the Grüneisen parameter (γ) is calculated to be 1.66(4). Fitting previous static compression data using our independently measured bulk modulus (isothermal Reuss bound) as a fixed parameter, we refined the first pressure derivative of the bulk modulus, K T ’ = 5.5(1). Systematic trends between H 2 O content and physical properties are evaluated among dense hydrous magnesium silicate (DHMS) phases along the forsterite-brucite join.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Systematic Layout Planning of a Radiology Reporting Area to Optimize Radiologists’ Performance

Optimizing radiologists’ performance is a major priority for managers of health services/systems, since the radiologists’ reporting activity imposes a severe constraint on radiology productivity. Despite that, methods to optimize radiologists’ reporting workplace layout are scarce in the literature. This study was performed in the Radiology Division (RD) of an 850-bed University-based general hospital. The analysis of the reporting workplace layout was carried out using the systematic layout planning (SLP) method, in association with cluster analysis as a complementary tool in early stages of SLP. Radiologists, architects, and hospital managers were the stakeholders consulted for the completion of different stages of the layout planning process. A step-by-step description of the proposed methodology to plan an RD reporting layout is presented. Clusters of radiologists were defined using types of exams reported and their frequency of occurrence as clustering variables. Sectors with high degree of interaction were placed in proximity in the new RD layout, with separation of noisy and quiet areas. Four reporting cells were positioned in the quiet area, grouping radiologists by subspecialty, as follows: cluster 1-abdomen; cluster 2-musculoskeletal; cluster 3-neurological, vascular and head & neck; cluster 4-thoracic and cardiac. The creation of reporting cells has the potential to limit unplanned interruptions and enhance the exchange of knowledge and information within cells, joining radiologists with the same expertise. That should lead to improvements in productivity, allowing managers to more easily monitor radiologists’ performance.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Manufacturing and Flexural Characterization of Infusion-Reacted Thermoplastic Wind Turbine Blade Subcomponents

Reactive thermoplastics are advantageous for wind turbine blades because they are recyclable at end of life, have reduced manufacturing costs, and enable thermal joining and shaping. However, there are challenges with manufacturing wind components from these new materials. This work outlines the development of manufacturing processes for a thick glass fiber-reinforced acrylic thermoplastic resin wind turbine blade spar cap, with consideration given to effects of the exothermic curing reaction on thick composite parts. Comparative elastic properties of these infusible thermoplastic materials with epoxy thermoset materials, as well as thermoplastic coupon components, are also included. Based on the results of this study it is concluded that the thermoplastic resin system is a viable candidate for the manufacturing of wind turbine blades using vacuum-assisted resin transfer molding. Significant gains in energy savings are realized avoiding heated molds, ability for recycling, and providing an opportunity for utilizing thermal welding.

17 WIND ENERGY↗

Empirical Characterization and Modeling of Cohesive – to – Adhesive Shear Fracture Mode Transition due to Increased Adhesive Layer Thicknesses of Fiber Reinforced Composite Single – Lap Joints

Here, to ensure a strong adhesive bond, most standards and adhesive manufacturers specify a maximum adhesive gap of 1 mm when bonding fiber reinforced composite structures. In manufacturing large components, such as joining two halves of wind turbine blades, meeting this gap tolerance specification is impractical; gaps larger than 10 mm are common in large adhesively bonded composite structures using state-of-the-art manufacturing techniques. Currently, there is a lack of fundamental understanding of the failure mechanics of adhesive gaps larger than 3 mm. To create such understanding, glass fiber - acrylic thermoplastic composite panels bonded using different epoxy adhesives within single-lap joint samples with adhesive thicknesses of 0.1 mm, 0.3 mm, 1 mm, 3 mm, 5 mm, and 10 mm were sheared to failure. A transition from cohesive to adhesive failure was observed to occur about 1 mm to 3 mm joint thicknesses. Plotting the shear stress normalized by the ratio of the joint width to thickness as a function of the joint thickness normalized by the joint length is shown to result in the ability to fit simple empirically derived models of the cohesive-to-adhesive failure transition, regardless of the adhesive. Furthermore, using these normalized variables, all the observed cohesively failed specimens collapse to a single master curve, as do the adhesively failed specimens.

36 MATERIALS SCIENCE↗

An integrated approach for water scarcity evaluation—a case study of Yunnan, China

In this paper, an integrated approach based on multiple indicators and individual and combinational evaluation methods is proposed to evaluate water scarcity. Four evaluation methods are employed, and their results are joined through three combination methods in order to obtain a consistent evaluation. This iterative-correction approach has been applied to Yunnan Province in China for water scarcity evaluation. The results demonstrate the capability of the iterative-correction framework to provide insightful analyses of water scarcity. Diqing Tibetan Autonomous Prefecture (Diqing) and Nujiang Li Autonomous Prefecture (Nujiang) ranked 1st and 2nd, indicating the best situation for water scarcity evaluation, while Yuxi and Zhaotong ranked 15th and 16th, indicating the worst situation. Two types of major water scarcities were observed in Yunnan Province. One was a typical representative of lack of water quality in the central part of Yunnan, and the other was a typical engineering type in the western part of Yunnan. The water scarcity has been found to arise from non-judicious water use, rapid urbanization and lack of protective measures for water resources. Finally and therefore, it is necessary to conduct more water conservancy projects in future to alleviate the water scarcity issue.

54 ENVIRONMENTAL SCIENCES↗

Local Erosion of the Channel After Reinforcement of the Millrace of the Votkinsk Hydroelectric Power Plant

Changes during operation in the state of the segment where concrete reinforcement of the water channels of the Votkinsk hydroelectric plant join the Kama River are examined. The reasons for erosion during the 1990’s, including lowering of the water levels in the lower millrace, are examined. It is noted that after reinforcement of the hopper during 1998 – 2000, the state of this segment remains satisfactory and does not threaten the safety of the equipment.

42 ENGINEERING↗

Trends in wetting behavior for Ag–CuO braze alloys on Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O (3-δ) at elevated temperatures in air

Ba 0.5 Sr 0.5 Co 0.8 0.2 O (3-δ) (BSCF) is a potential oxygen separation membrane material for advanced coal based power plants. For this application, BSCF must be joined to a metal. In the current study, Ag-CuO, a reactive air brazing (RAB) alloy was evaluated for brazing BSCF. In-situ contact angle tests were performed on BSCF using Ag-CuO binary mixtures at 950 and 1000°C and the interfacial microstructures were evaluated. Wetting contact angles (θ< 90°) were obtained at short times at 950°C and the contact angles remained constant at 1000°C for 1, 2 and 8 mol% CuO contents. Microstructural analysis revealed the dissolution of copper oxide into the BSCF matrix to form copper-cobalt-oxygen rich dissolution products along the BSCF grain boundary. The formation of a thick interfacial reaction product layer and ridging at the sessile drop triple point indicate that the reaction kinetics are very rapid and that it will require careful process control to obtain the desired thin but continuous interfacial product layer.

36 MATERIALS SCIENCE↗

Cantilever testing of sintered-silver interconnects

Cantilever testing is an underutilized test method from which results and interpretations promote greater understanding of the tensile and shear failure responses of interconnects, metallizations, or bonded joints. The use and analysis of this method were pursued through the mechanical testing of sintered-silver interconnects that joined Ni/Au-plated copper pillars or Ti/Ni/Ag-plated silicon pillars to Ag-plated direct bonded copper substrates. Sintered-silver was chosen as the interconnect test medium because of its high electrical and thermal conductivities and high-temperature capability—attractive characteristics for a candidate interconnect in power electronic components and other devices. Deep beam theory was used to improve upon the estimations of the tensile and shear stresses calculated from classical beam theory. The failure stresses of the sintered-silver interconnects were observed to be dependent on test-condition and test-material-system. In conclusion, the experimental simplicity of cantilever testing, and the ability to analytically calculate tensile and shear stresses at failure, result in it being an attractive mechanical test method to evaluate the failure response of interconnects.

36 MATERIALS SCIENCE↗

Numerical Analysis of Fatigue Behavior of ITER-Like Monoblock Divertor Interlayer Under Coupled Heat Loads

High-confinement mode is a very prominent operation style for future fusion device due to its unique advantages. However, the conjuncted edge localized modes (ELMs) are very difficult to control so that divertor plates are very prone to suffer both stationary high heat flux (HHF) loads of long-pulse operating mode and transient shock loads of ELMs. Most previous researches focus on degradation of plasma facing material (PFM), however, as a layer joining PFM and cooling tube, the soft copper interlayer suffers concentrated thermal stress loads due to mismatched thermal expansion of PFM and cooling tube. Its thermal fatigue behavior under such coupled loads is also of great significance to structural safety of divertor component. With such a motivation, the reduction effects on fatigue life time of a typical interlayer of monoblock divertor under series of coupled HHF and ELMs shock loading conditions are investigated. It is found that: (1) The transient shock feature of ELMs loading is propagated into interlayer with less sharp pattern. The increase of damage induced by coupled ELMs loading is limited in single cycle, while the accumulated damage of multiple consecutive coupled loading cycles is increased nonlinearly. (2) Under the coupled HHF and ELMs loading, the fatigue life time of interlayer is generally decreasing. The magnitude of decrease is increasing nonlinearly with the magnitude of ELMs peak and averaged heat flux. (3) For three characteristic parameters of ELMs shock loading such as frequency, duration and peak heat flux, the peak heat flux and frequency are two parameters more sensitive to determine coupled reduction effects on fatigue lifetime of the interlayer, while for high frequency case, time averaged heat flux takes the lead.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Crystal structure and antiferromagnetic ordering of quasi-2D [Cu(HF{sub 2})(pyz){sub 2}]TaF{sub 6} (pyz = pyrazine).

The crystal structure of the title compound was determined by X-ray diffraction at 90 and 295 K. Copper(II) ions are coordinated to four bridging pyz ligands to form square layers in the ab-plane. Bridging HF{sub 2}{sup -} ligands join the layers together along the c-axis to afford a tetragonal, three-dimensional (3D) framework that contains Taf{sub 6}{sup -} anions in every cavity. At 295 K, the pyz rings lie exactly perpendicular to the layers and cooling to 90 K induces a canting of those rings. Magnetically, the compound exhibits 2D antiferromagnetic correlations within the 2D layers with an exchange interaction of -13.1(1) K. Weak interlayer interactions, as mediated by Cu-F-H-F-Cu, leads to long-range magnetic order below 4.2 K. Pulsed-field magnetization data at 0.5 K show a concave curvature with increasing B and reveal a saturation magnetization at 35.4 T.

36 MATERIALS SCIENCE↗

X-Ray Digital Radiography to Study Gold–Silver Nose Decorations from the Moche Tomb of the Lady of Cao

In the present study nose decorations from the tomb of the ‘Lady of Cao’, a mummified Moche woman dated around third–fourth century AD, were analyzed by a portable X-ray digital radiography (XDR) system. The Moche civilization flourished along the north coast of present-day Peru, between the Andes and the Pacific Ocean, approximately between 100 and 600 AD. The Moche were very sophisticated artisans and metal smiths, so that they are considered the finest producers of jewels and artifacts of the region. Their metalworking ability was impressively demonstrated by the excavations of the tomb of the ‘Lady of Cao’, discovered by Regulo Franco in 2005. More than 100 beautiful jewels were found in this tomb, among them about 40 nose decorations composed of a combination of gold and silver sheets. Radiographs of several of them were carried out, with the aim to evaluate the gold–silver joining process, to check the homogeneity of the alloy and to quantify the thickness of the sheets. The XDR system consisted of a mini X-ray tube and of a digital X-ray flat panel. The radiographic images of the nose decorations revealed details of the manufacturing process and of the Au–Ag junction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Geometrical Barriers and the Growth of Flux domes in Thin Ideal Superconducting Disks

When an ideal (no bulk pinning) flat type-II superconducting disk is subjected to a perpendicular magnetic field H{sub a}, the first vortex nucleates at the rim when H{sub a} = H{sub 0}, the threshold field, and moves quickly to the center of the disk. As H{sub a} increases above H{sub 0}, additional vortices join the others, and together they produce a domelike field distribution of radius b. In this paper I present analytic solutions for the resulting magnetic-field and sheet-current-density distributions. I show how these distributions vary as b increases with H{sub a}, and I calculate the corresponding field-increasing magnetization.

36 MATERIALS SCIENCE↗