Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrogen analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Advancement of Systems Designs and Key Engineering Technologies for Materials Based Hydrogen Storage

UTRC lead the development of the Simulink Framework model that enables a comparison of different hydrogen storage systems on a common basis. The Simulink Framework model was disseminated on the www.HSECoE.org website that is hosted by NREL. UTRC contributed to a better understanding of the safety aspects of the proposed hydrogen storage systems. UTRC also participated in the Failure Mode and Effect Analysis of both the chemical- and the adsorbent-based hydrogen storage system during Phase 2 of the Hydrogen Storage Engineering Center of Excellence. UTRC designed a hydrogen storage system with a reversible metal hydride material in a compacted form for light-duty vehicles with a 5.6 kg H2 storage capacity, giving it a 300 miles range. It contains a heat exchanger that enables efficient cooling of the metal hydride material during hydrogen absorption in order to meet the 3.3 minute refueling time target. It has been shown through computation that the kinetics of hydrogen absorption of Ti-catalyzed NaAlH4 was ultimately limiting the rate of hydrogen absorption to 85% of the material capacity in 3.3 minutes. An inverse analysis was performed in order to determine the material property requirements in order for a metal hydride based hydrogen storage system to meet the DOE targets. Work on metal hydride storage systems was halted after the Phase 1 to Phase 2 review due to the lack of metal hydride materials with the required material properties. UTRC contributed to the design of a chemical hydrogen storage system by developing an adsorbent for removing the impurity ammonia from the hydrogen gas, by developing a system to meter the transport of Ammonia Borane (AB) powder to a thermolysis reactor, and by developing a gas-liquid-separator (GLS) for the separation of hydrogen gas from AB slurry in silicone oil. Stripping impurities from hydrogen gas is essential for a long life of the fuel cell system on board of a vehicle. Work on solid transport of AB was halted after the Phase 1 to Phase 2 review in favor of studying the slurry-form of AB as it appeared to be difficult to transport a solid form of AB through the thermolysis reactor. UTRC demonstrated the operation of a compact GLS in the laboratory at a scale that would be required for the actual automotive application. The GLS met the targets for weight and volume. UTRC also reported about the unresolved issue associated with the high vapor pressure of fluids that could be used for making a slurry-form of AB. Work on the GLS was halted after the Phase 2 to Phase 3 review as the off-board regeneration efficiency of the spent AB was below the DOE target of 60%. UTRC contributed to the design of an adsorbent-based hydrogen storage system through measurements of the thermal conductivity of a compacted form of Metal Organic Framework (MOF) number 5 and through the development and sizing of a particulate filter. Thermal conductivity is important for the design of the modular adsorbent tank insert (MATI), as developed by Oregon State University (OSU), in order to enable a rapid refueling process. Stringent hydrogen quality requirements can only be met with an efficient particulate filtration system. UTRC developed a method to size the particulate filter by taking into account the effect of the pressure drop on the hydrogen adsorption process in the tank. UTRC raised awareness about the potential use of materials-based H2 storage systems in applications outside the traditional light-duty vehicle market segment by presenting at several conferences about niche application opportunities in Unmanned Aerial Vehicles (UAV), Autonomous Underwater Vehicles (AUV), portable power and others.

08 HYDROGEN↗

Hydrogen Atom Abstraction from an Os II (NH 3 ) 2 Complex Generates an Os IV (NH 2 ) 2 Complex: Experimental and Computational Analysis of the N–H Bond Dissociation Free Energies and Reactivity

We report double hydrogen atom abstraction from (TMP)Os II (NH 3 ) 2 (TMP = tetramesitylporphyrin) with phenoxyl or nitroxyl radicals leads to (TMP)Os IV (NH 2 ) 2 . This unusual bis(amide) complex is diamagnetic and displays an N-H resonance at 12.0 ppm in its 1 H NMR spectrum. 1 H- 15 N correlation experiments identified a 15 N NMR spectroscopic resonance at –267 ppm. Experimental reactivity studies and density functional theory calculations support relatively weak N-H bonds of 73.3 kcal/mol for (TMP)Os II (NH 3 ) 2 and 74.2 kcal/mol for (TMP)Os III (NH 3 )(NH 2 ). Cyclic voltammetry experiments provide an estimate of the pK a of [(TMP)Os III (NH 3 ) 2 ] + . In the presence of Barton’s base, a current enhancement is observed at the Os(III/II) couple, consistent with an ECE event. Spectroscopic experiments confirmed (TMP)Os IV (NH 2 ) 2 as the product of bulk electrolysis. Double hydrogen atom abstraction is influenced by π donation from the amides of (TMP)Os IV (NH 2 ) 2 into the d orbitals of the Os center, favoring the formation of (TMP)Os IV (NH 2 ) 2 over N-N coupling. This π donation leads to a Jahn-Teller distortion that splits the energy levels of the d xz and d yz orbitals of Os, results in a low spin electron configuration, and leads to minimal aminyl character on the N atoms, rendering (TMP)Os IV (NH 2 ) 2 unreactive towards amide-amide coupling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NEW CONSTRAINTS ON THE QUASAR BROAD EMISSION LINE REGION

We demonstrate a new technique for determining the physical conditions of the broad-line-emitting gas in quasars, using near-infrared hydrogen emission lines. Unlike higher ionization species, hydrogen is an efficient line emitter for a very wide range of photoionization conditions, and the observed line ratios depend strongly on the density and photoionization state of the gas present. A locally optimally emitting cloud model of the broad emission line region was compared to measured emission lines of four nearby (z Almost-Equal-To 0.2) quasars that have optical and NIR spectra of sufficient signal to noise to measure their Paschen lines. The model provides a good fit to three of the objects, and a fair fit to the fourth object, an ultraluminous infrared galaxy. We find that low-incident-ionizing fluxes ({Phi}{sub H} < 10{sup 18} cm{sup -2} s{sup -1}) and high gas densities (n{sub H} > 10{sup 12} cm{sup -3}) are required to reproduce the observed hydrogen emission line ratios. This analysis demonstrates that the use of composite spectra in photoionization modeling is inappropriate; models must be fitted to the individual spectra of quasars.

79 ASTRONOMY AND ASTROPHYSICS↗

A Direct Probe of the Hydrogen Bond Network in Aqueous Glycerol Aerosols

The properties of aerosols are of paramount importance in atmospheric chemistry and human health. The hydrogen bond network of glycerol-water aerosols generated from an aqueous solution with different mixing ratios is probed directly with X-ray photoelectron spectroscopy. The carbon and oxygen X-ray spectra reveal contributions from gas and condensed phase components of the aerosol. It is shown that water suppresses glycerol evaporation up to a critical mixing ratio. A dielectric analysis using terahertz spectroscopy coupled with infrared spectroscopy of the bulk solutions provides a picture of the microscopic heterogeneity prevalent in the hydrogen bond network when combined with the photoelectron spectroscopy analysis. The hydrogen bond network is composed of three intertwined regions. At low concentrations, glycerol molecules are surrounded by water forming a solvated water network. Adding more glycerol leads to a confined water network, maximizing at 22 mol %, beyond which the aerosol resembles bulk glycerol. This microscopic view of hydrogen bonding networks holds promise in probing evaporation, diffusion dynamics, and reactivity in aqueous aerosols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon Dioxide Conversion to Valuable Chemical Products over Composite Catalytic Systems

Presented is an experimental study on catalytic conversion of carbon dioxide into methanol, ethanol and acetic acid. Catalysts having different catalytic functions were synthesized and combined in different ways to enhance selectivity to desired products. The combined catalyst system possessed the following functions: methanol synthesis, Fischer-Tropsch synthesis, water-gas-shift and hydrogenation. Results showed that the methods of integrating these catalytic functions played important role in achieving desired product selectivity. It was speculated that if methanol synthesis sites were located adjacent to the C-C chain growth sites, the formation rate of C2 oxygenates would be enhanced. The advantage of using high temperature methanol catalyst PdZnAl in the combined catalyst system was demonstrated. In the presence of PdZnAl catalyst, the combined catalyst system was stable at temperature of 380oC. It was observed that, at high temperature, kinetics favored oxygenate formation. Results implied that the process can be intensified by operating at high temperature using Pd-based methanol synthesis catalyst. Steam reforming of the byproduct organics was demonstrated as a means to provide supplemental hydrogen. Preliminary process design, simulation, and economic analysis of the proposed CO2 conversion process were carried out. Economic analysis indicates how ethanol production cost was affected by the price of CO2 and hydrogen.

Dagle, Robert A.↗

Structure and thermal behavior of a nickel complex based on a V-shaped bis(4-(1H-imidazol-1-yl)phenyl)amine ligand

A new coordination polymer ([Ni(BIPA)(bpdc)(H{sub 2}O){sub 2}]){sub n} has been prepared based on a new V-shaped bis(4-(1H-imidazol-1-yl)phenyl)amine (BIPA) ligand. Complex was characterized by elemental analysis, IR spectra, X-ray powder diffraction, thermal analysis and single crystal X-ray analysis. Complex exhibits a 1D → 3D structure. Hydrogen bonds play an important role in the formation of supramolecular network structure. Thermal analysis indicates that complex exhibits a high thermal stability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of MXene termination groups on hydrogen interactions

MXenes are a relatively new class of nanomaterial consisting of alternating layers of transition metals and carbon or nitrogen, capped off on either end by terminal groups, usually from the P-block. They have been considered for a wide range of purposes, including hydrogen storage. In this study, thermogravimetric analysis and mass spectrometry residual gas analysis are performed on Ti 3 C 2 T x and Ti 2 CT x to characterize their terminal groups. The hydrogen absorption capabilities of the heat-treated samples are measured using a Sievert apparatus and compared against untreated samples. This reveals that, during heating, the MXenes lose hydrogen, water, fluoride, hydrofluoric acid, and carbon dioxide. Isothermal absorption measurements suggest that the removal of termination groups might improve hydrogen uptake kinetics at high temperatures, but has little effect at room temperatures.

08 HYDROGEN↗

Analysis of electron energy distribution function in the Linac4 H{sup −} source

To understand the Electron Energy Distribution Function (EEDF) in the Radio Frequency Inductively Coupled Plasmas (RF-ICPs) in hydrogen negative ion sources, the detailed analysis of the EEDFs using numerical simulation and the theoretical approach based on Boltzmann equation has been performed. It is shown that the EEDF of RF-ICPs consists of two parts, one is the low energy part which obeys Maxwellian distribution and the other is high energy part deviated from Maxwellian distribution. These simulation results have been confirmed to be reasonable by the analytical approach. The results suggest that it is possible to enhance the dissociation of molecules and the resultant H{sup −} negative ion production by reducing the gas pressure.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A new perspective on the initial hydrogenation of $\mathrm{TiFe_{0.9}M_{0.1}}$ ($\mathrm{M = V, Cr, Fe, Co, Ni}$) gained from surface oxide analysis and nucleation thermodynamics

Despite the promise of TiFe-based alloys as low-cost solid-state hydrogen storage materials with mild operating conditions and reasonable hydrogen capacity, their initial hydrogenation process is difficult, hindering broad utilization. The effect of alloying element on the initial hydrogenation kinetics of TiFe alloys, TiFe 0.9 M 0.1 (M = V, Cr, Fe, Co and Ni), was evaluated by analyzing changes to the passivating surface oxide layer that inhibits hydrogen permeation, as well as the ease of initial-stage hydrogen absorption into the underlying matrix. X-ray photoelectron spectroscopy and atom probe tomography revealed key variations in surface oxide compositions and thinning of the passivating oxide layer compared to pure TiFe, which suggests suppressed oxide growth by alloying-induced elemental redistribution. At the same time, density functional theory calculations predicted exothermic formation of hydride nuclei when alloying with V or Cr, as well as a reduced nucleation barrier when alloying with Co or Ni. Overall, these results are consistent with the observed experimental trend of the activation kinetics. We propose that improvements in activation kinetics of TiFe with alloying arises from the combined effect of reduced passivating oxide thickness and easier hydride nucleation, offering a starting point for alloy design strategies towards further improvement.

25 ENERGY STORAGE↗

H2@Scale: Technical and Economic Potential of Hydrogen as an Energy Intermediate

The H2@Scale concept is focused on developing hydrogen as an energy carrier and using hydrogen's properties to improve the national energy system. Specifically hydrogen has the abilities to (1) supply a clean energy source for industry and transportation and (2) increase the profitability of variable renewable electricity generators such as wind turbines and solar photovoltaic (PV) farms by providing value for otherwise potentially-curtailed electricity. Thus the concept also has the potential to reduce oil dependency by providing a low-carbon fuel for fuel cell electric vehicles (FCEVs), reduce emissions of carbon dioxide and pollutants such as NOx, and support domestic energy production, manufacturing, and U.S. economic competitiveness. The analysis reported here focuses on the potential market size and value proposition for the H2@Scale concept. It involves three analysis phases: 1. Initial phase estimating the technical potential for hydrogen markets and the resources required to meet them; 2. National-scale analysis of the economic potential for hydrogen and the interactions between willingness to pay by hydrogen users and the cost to produce hydrogen from various sources; and 3. In-depth analysis of spatial and economic issues impacting hydrogen production and utilization and the markets. Preliminary analysis of the technical potential indicates that the technical potential for hydrogen use is approximately 60 million metric tons (MMT) annually for light duty FCEVs, heavy duty vehicles, ammonia production, oil refining, biofuel hydrotreating, metals refining, and injection into the natural gas system. The technical potential of utility-scale PV and wind generation independently are much greater than that necessary to produce 60 MMT / year hydrogen. Uranium, natural gas, and coal reserves are each sufficient to produce 60 MMT / year hydrogen in addition to their current uses for decades to centuries. National estimates of the economic potential of hydrogen production using steam methane reforming of natural gas, high temperature electrolysis coupled with nuclear power plants, and low temperature electrolysis are reported. To generate the estimates, supply curves for those technologies are used. They are compared to demand curves that describe the market size for hydrogen uses and willingness to pay for that hydrogen. Scenarios are developed at prices where supply meets demand and are used to estimate energy use, emissions, and economic impacts.

13 HYDRO ENERGY↗

Potential Size of and Value Proposition for H2@Scale Concept

The H2@Scale concept is focused on developing hydrogen as an energy carrier and using hydrogen's properties to improve the national energy system. Specifically hydrogen has the abilities to (1) supply a clean energy source for industry and transportation and (2) increase the profitability of variable renewable electricity generators such as wind turbines and solar photovoltaic (PV) farms by providing value for otherwise potentially-curtailed electricity. Thus the concept also has the potential to reduce oil dependency by providing a low-carbon fuel for fuel cell electric vehicles (FCEVs), reduce emissions of carbon dioxide and pollutants such as NOx, and support domestic energy production, manufacturing, and U.S. economic competitiveness. The analysis reported here focuses on the potential market size and value proposition for the H2@Scale concept. It involves three analysis phases: 1. Initial phase estimating the technical potential for hydrogen markets and the resources required to meet them; 2. National-scale analysis of the economic potential for hydrogen and the interactions between willingness to pay by hydrogen users and the cost to produce hydrogen from various sources; and 3. In-depth analysis of spatial and economic issues impacting hydrogen production and utilization and the markets. Preliminary analysis of the technical potential indicates that the technical potential for hydrogen use is approximately 60 million metric tons (MMT) annually for light duty FCEVs, heavy duty vehicles, ammonia production, oil refining, biofuel hydrotreating, metals refining, and injection into the natural gas system. The technical potential of utility-scale PV and wind generation independently are much greater than that necessary to produce 60 MMT / year hydrogen. Uranium, natural gas, and coal reserves are each sufficient to produce 60 MMT / year hydrogen in addition to their current uses for decades to centuries. National estimates of the economic potential of hydrogen production using steam methane reforming of natural gas, high temperature electrolysis coupled with nuclear power plants, and low temperature electrolysis are reported. To generate the estimates, supply curves for those technologies are used. They are compared to demand curves that describe the market size for hydrogen uses and willingness to pay for that hydrogen. Scenarios are developed at prices where supply meets demand and are used to estimate energy use, emissions, and economic impacts.

13 HYDRO ENERGY↗

Analysis of Phosphonic Acids: Validation of Semi-Volatile Analysis by HPLC-MS/MS by EPA Method MS999

The Environmental Protection Agency's (EPA) Region 5 Chicago Regional Laboratory (CRL) developed a method titled Analysis of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid, and Pinacolyl Methylphosphonic Acid in Water by Multiple Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry: EPA Version MS999. This draft standard operating procedure (SOP) was distributed to multiple EPA laboratories and to Lawrence Livermore National Laboratory, which was tasked to serve as a reference laboratory for EPA's Environmental Reference Laboratory Network (ERLN) and to develop and validate analytical procedures. The primary objective of this study was to validate and verify the analytical procedures described in EPA Method MS999 for analysis of the listed phosphonic acids and surrogates in aqueous samples. The gathered data from this validation study will be used to: (1) demonstrate analytical method performance; (2) generate quality control acceptance criteria; and (3) revise the SOP to provide a validated method that would be available for use during a homeland security event. The data contained in this report will be compiled, by EPA CRL, with data generated by other EPA Regional laboratories so that performance metrics of EPA Method MS999 can be determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

H2@Scale Analysis

The 'H2@Scale' concept focuses on the opportunity for hydrogen to be an energy intermediate like electricity that supports both production opportunities and demand applications. Hydrogen is complementary to electricity because of its inherent capability to be stored. It can also be produced easily from electricity and is fungible with a variety of applications. This presentation summarizes the H2@Scale analysis efforts performed during the latter half of 2018 and the first quarter of 2019. We analyzed the technical and economic potential for hydrogen. Our preliminary estimate of the maximum market size for hydrogen is 166 million metric tons (MMT) annually. The analysis shows sufficient wind and solar resources to meet that demand. Five economic potential scenarios are also presented. Their market sizes, prices, sources, and applications are estimated through development of national supply and demand curves and using them to estimate market equilibria. The resulting market size ranges from 14 MMT/yr to 48 MMT/yr. Analysis is underway to identify the lowest-cost delivery and storage options for those four scenarios. Additional proposed work focuses on developing regional fidelity and understanding potential opportunities for a transition from today's hydrogen market to one with H2@Scale.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Solar photoionization as a loss mechanism of neutral interstellar hydrogen in interplanetary space

Two primary loss mechanisms of interstellar neutral hydrogen in interplanetary space are resonance charge exchange ionization with solar wind protons and photoionization by solar EUV radiation. The later process has often been neglected since the average photoionization rate has been estimated to be as much as 5 to 10 times smaller than the charge exchange rate. These factors are based on ionization rates from early measurements of solar EUV and solar wind fluxes. Using revised solar EUV and solar wind fluxes measured near the ecliptic plane we have reinvestigated the ionization rates of interplanetary hydrogen. The result of our analysis indicates that indeed the photoionization rate during solar minimum can be smaller than charge exchange by a factor of 5; however, during solar maximum conditions when solar EUV fluxes are high, and solar wind fluxes are low, photoionization can be over 60% of the charge exchange rate at Earth orbit. To obtain an accurate estimate of the importance of photoionization relative to charge exchange, we have included photoionization from both the ground and metastable states of hydrogen. We find, however, that the photoionization from the metastable state does not contribute significantly to the overall photoionization rate.

Ogawa, H. S.↗

Regulations, Codes, and Standards (RCS) for Large-Scale Hydrogen Systems

Hydrogen has potential applications that require larger-scale storage, use, and handling systems than currently are employed in emerging-market fuel cell applications. These potential applications include hydrogen generation and storage systems that would support electrical grid systems. There has been extensive work evaluating regulations, codes, and standards (RCS) for the emerging fuel cell market, such as the infrastructure required to support fuel cell electric vehicles. However, there has not been a similar RCS evaluation and development process for these larger systems. This paper presents an evaluation of the existing RCS in the United States for large-scale systems and identifies potential RCS gaps. This analysis considers large-scale hydrogen technologies that are currently being employed in limited use but may be more widely used as large-scale applications expand. The paper also identifies areas of potential safety research that would need to be conducted to fill the RCS gaps. U.S. codes define bulk hydrogen storage systems but do not define large-scale systems. This paper evaluates potential applications to define a large-scale hydrogen system relative to the systems employed in emerging technologies such as hydrogen fuelling stations. These large-scale systems would likely be of similar size to or larger than industrial hydrogen systems.

08 HYDROGEN↗

Structural unit charge density and molecular cation templating effects on orientational geometric isomerism and interlayer spacing in 2-D uranyl sulfates

The new uranyl aqua sulfate compound [({CH_3}{sub 3}N{sub 2}C{sub 3}H{sub 3}{CH_2COOH})(H{sub 3}O)] [(UO{sub 2}){sub 2}(SO{sub 4}){sub 3}(H{sub 2}O)]·1.5H{sub 2}O was synthesized and the crystal structure determined. The two-dimensional uranyl-aqua sulfate compound exhibits a previously reported anionic structural unit topology, but features an interstitial complex incorporating hydronium in the form of a disorder Zundel cation and the cation moiety from the ionic liquid 1-carboxymethyl 3-methylimidazolium bistriflimide [HBetMIm][Tf{sub 2}N], which forms hydrogen bonding dimer pairs. An analysis of similar uranyl sulfate complexes from the literature is conducted to explore the relative importance and role of structure directing factors in alkylammonium charge-balanced two-dimensional uranyl sulfates. A correlation is observed between structural unit charge density and interlayer spacing, with a concomitant direction of structural and orientational geometric isomerism of the anionic structural unit. We discuss the role of synthetic conditions and molecular cation properties in directing structural unit formation through charge density matching and hydrogen bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NEW EXTENDED DEUTERIUM FRACTIONATION MODEL: ASSESSMENT AT DENSE ISM CONDITIONS AND SENSITIVITY ANALYSIS

Observations of deuterated species are useful in probing the temperature, ionization level, evolutionary stage, chemistry, and thermal history of astrophysical environments. The analysis of data from the Atacama Large Millimeter Array and other new telescopes requires an elaborate model of deuterium fractionation. This paper presents a publicly available chemical network with multi-deuterated species and an extended, up-to-date set of gas-phase and surface reactions. To test this network, we simulate deuterium fractionation in diverse interstellar sources. Two cases of initial abundances are considered: (1) atomic except for H{sub 2} and HD, and (2) molecular from a prestellar core. We reproduce the observed D/H ratios of many deuterated molecules, and sort the species according to their sensitivity to temperature gradients and initial abundances. We find that many multiply deuterated species produced at 10 K retain enhanced D/H ratios at temperatures {approx}< 100 K. We study how recent updates to reaction rates affect calculated D/H ratios, and perform a detailed sensitivity analysis of the uncertainties of the gas-phase reaction rates in the network. We find that uncertainties are generally lower in dark cloud environments than in warm infrared dark clouds and that uncertainties increase with the size of the molecule and number of D-atoms. A set of the most problematic reactions is presented. We list potentially observable deuterated species predicted to be abundant in low- and high-mass star-formation regions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Test Results from Gamma Irradiation of Aluminum Oxyhydroxides

Hydrated metal oxides or oxyhydroxides boehmite and gibbsite that can form on spent aluminum-clad nuclear fuel assemblies during in-core and post-discharge wet storage were exposed as granular powders to gamma irradiation in a 60 Co irradiator in closed laboratory test vessels with air and with argon as separate cover gases. The results show that boehmite readily evolves hydrogen with exposure up to a dose of 1.8 x 10 8 rad, the maximum tested, in both a full-dried and moist condition of the powder, whereas only a very small measurable quantity of hydrogen was generated from the granular powder of gibbsite. Specific information on the test setup, sample characteristics, sample preparation, irradiation, and gas analysis are described.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗