Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high reliability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

An ultrahigh rate digital tape recorder for spacecraft applications

Spaceborne digital recorders must satisfy the conflicting requirements of maximum data storage of high-rate data (particularly for high-resolution sensor data) and a long life with high reliability (meaning rugged design and moderate head-to-tape speeds). The multitrack longitudinal (fixed head) recorder can successfully resolve this conflict and satisfy both requirements. An evolutionary machine is described which was originally designed to store and reproduce 30 minutes of 39.9-Mb/sec sensor data, for mission lives on the order of one year; newer designs have surpassed these parameters by significant amounts.

Thompson, C. R.↗
NASA NTRS1973

Nondestructive testing of electro thermal devices

This paper describes the results of a recent investigation into 'thermal time constant' nondestructive testing of high reliability electrical fuses. The use of established nondestructive test technology for examining the quality and firing characteristics of electro-explosive devices has been successfully applied to the inspection and prediction of the functional performance of electrical fuses. The technique requires application of a low level current pulse to the electrical fuse with an oscilloscope display of the curve as generated by the temperature coefficient of resistance feedback. The heating curve of temperature vs time is composed of one predominant thermal time constant, which is the product of the test unit's thermal capacity and thermal resistance. It has been found that the quality of the individual electrical fuse, for instance, the relative condition of the critical internal weld or solder joint, can be examined nondestructively.

Earnest, J. E., Jr.↗
NASA NTRS1974

A strapdown laser gyro navigator

A broad spectrum of commercial and military vehicles employ some form of inertial measurement equipment. In general this equipment has a special purpose in that it was tailored for each specific application thereby resulting in high installation and maintenance costs. Recently the emphasis has been directed toward developing low cost building blocks from which the desired inertial functions can be derived. This paper describes a National Aeronautics and Space Administration (NASA) program that combines inertial system sensor and computational advances into a flight demonstration configuration. Specifically, an inertial navigation system employing strapdown laser gyro angular rate sensors and a miniature, modular digital flight computer is described. The objective of this program is to demonstrate, via flight test evaluation, the capabilities of the advanced sensor and computer as they apply to future low cost, high reliability inertial system applications.

Garret, H.↗
NASA NTRS1975

Central control element expands computer capability

Redundant processing and multiprocessing modes can be obtained from one computer by using logic configuration. Configuration serves as central control element which can automatically alternate between high-capacity multiprocessing mode and high-reliability redundant mode using dynamic mode switching in real time.

Easton, R. A.↗
NASA NTRS1975

Wide-angle sun sensors

Two sensors have been developed: one, single-axis device, is cylindrical; the other, two-axis device, is spherical. Multiple surface deposits of photosensitive material, such as cadmium sulfide, serve as redundancy, ensuring high reliability.

Schumacher, L. L.↗
NASA NTRS1975

Power spectrum analysis of staggered quadriphase-shift-keyed signals

Mathematical analysis of power spectrum of outputs from high-reliability communication system is used to determine system bandwidth. Analysis provides mathematical relationships of signal power spectrum at output of hard limiter for any type of baseband pulse input subjected only to output parameter constraints.

Mcwhorter, F. L.↗
NASA NTRS1974

Electromagnetic radiation screening of microcircuits for long life applications

The utility of X-rays as a stimulus for screening high reliability semiconductor microcircuits was studied. The theory of the interaction of X-rays with semiconductor materials and devices was considered. Experimental measurements of photovoltages, photocurrents, and effects on specified parameters were made on discrete devices and on microcircuits. The test specimens included discrete devices with certain types of identified flaws and symptoms of flaws, and microcircuits exhibiting deviant electrical behavior. With a necessarily limited sample of test specimens, no useful correlation could be found between the X-ray-induced electrical response and the known or suspected presence of flaws.

Brammer, W. G.↗
NASA NTRS1974

Multiple-slit shadow device for sensing the direction to a shining object

A multi-slit shadow direction sensor of jalousie type (JDS) was developed to provide a simple, highly reliable tracking system to guide a rotating mirror toward the sun so that the reflected light would illuminate the input slit of a photoelectric spectrometer. The operating principle and stability are considered as well as determination of initial signal level at the output of each photosensor. A procedure is recommended for calculation of a JDS. Both one- and two-coordinate sun direction sensors are described and considered for use in the tracking system of a photoelectric spectrometer.

Bruns, A. V.↗
NASA NTRS1974

Airoscope command system

A PCM telemetry command system is presented having a capacity of 256 unique commands, an end-to-end actuation time of less than 250 milliseconds, and an address plus complementary command code to provide security against the acceptance of anything but intended commands. The system consists of a ground-based encoder and a balloon-borne decoder, both built using low-current drain, high reliability CMOS logic elements. Commands are normally issued by a simple switch closure to +5VDC on the appropriate input line, however as a backup mode, the 8-bit command may be entered manually on 8 toggle switches and executed via a SEND button. In any case, the command is then serialized into a PCM bit stream and sent via a P-Band radio link to the DECODER aloft. All 256 outputs from the DECODER are buffered through drivers and thus may be used to drive CMOS, TTL, or DTL logic.

Barrows, W.↗
NASA NTRS1974

Evaluation of soft rubber goods

The performance of rubber goods suitable for use as O-rings, seals, gaskets, bladders and diaphragms under conditions simulating those of the space shuttle were studied. High reliability throughout the 100 flight missions planned for the space shuttle was considered of overriding importance. Accordingly, in addition to a rank ordering of the selected candidate materials based on prolonged fluid compatibility and sealability behavior, basic rheological parameters (such as cyclic hysteresis, stress relaxation, indicated modulus, etc.) were determined to develop methods capable of predicting the cumulative effect of these multiple reuse cycles.

Merz, P. L.↗
NASA NTRS1975

Main memory unit

The development of a main memory unit (MMU) for the space ultrareliable module computer (SUMC) model HTC is discussed. The design, fabrication, and test of basic memory modules (BMM) which were to be used in the design and construction of the MMU are described. The BMM was designed from state-of-the-art technologies which included large scale integration devices mounted and interconnected on a substrate to form a functional module to be utilized in the MMU development. A SUMC memory system design study is discussed which addressed itself to the BMM design and analysis to be conducted to determine the most efficient organization of the BMM in order to establish such modularity features as: word length expandability without redesign, high reliability, and fault tolerance. One MMU was designed, fabricated, tested, and delivered which will be electrical and mechanically compatible with the hybrid technology computer (HTC) model of the SUMC family of computers. The MMU will contain a storage capacity of 8196 36 bit words which includes a parity bit for each 8 bit byte of data.

Source record↗
NASA NTRS1975

Wide angle sun sensor

A single-axis sun sensor consists of a cylinder of an insulating material on which at least one pair of detectors is deposited on a circumference of the cylinder, was disclosed. At any time only one-half of the cylinder is illuminated so that the total resistance of the two detectors is a constant. Due to the round surface on which the detectors are deposited, the sensor exhibits a linear wide angle of + or - 50 deg to within an accuracy of about 2%. By depositing several pairs of detectors on adjacent circumferences, sufficient redundancy is realized to provide high reliability. A two-axis sensor is provided by depositing detectors on the surface of a sphere along at least two orthogonal great circles.

Schumacher, L. L.↗
NASA NTRS1975

Investigation of discrete component chip mounting technology for hybrid microelectronic circuits

The use of polymer adhesives for high reliability microcircuit applications is a radical deviation from past practices in electronic packaging. Bonding studies were performed using two gold-filled conductive adhesives, 10/90 tin/lead solder and Indalloy no. 7 solder. Various types of discrete components were mounted on ceramic substrates using both thick-film and thin-film metallization. Electrical and mechanical testing were performed on the samples before and after environmental exposure to MIL-STD-883 screening tests.

Caruso, S. V.↗
NASA NTRS1975

Actuation and system design and evaluation OMS engine shutoff valve, Volume 1

A technology program was conducted to identify and verify the optimum valve and actuation system concept for the Space Shuttle Orbit Maneuvering System engine. Of major importance to the valve and actuation system selection was the ten-year, 100-mission, 10,000-cycle life requirement, while maintaining high reliability, low leakage, and low weight. Valve and actuation system concepts were comparatively evaluated against past valve failure reports and potential failure modes due to the shuttle mission profile to aid in the selection of the most optimum concept for design, manufacture and verification testing. Two valve concepts were considered during the preliminary design stage; i.e., the moving seat and lifting ball. Two actuation systems were manufactured and tested. Test results demonstrate the viability of a lifting ball concept as well as the applicability of an ac motor actuation system to best meet the requirements of the shuttle mission.

Dunn, V. B.↗
NASA NTRS1975

Status and trends in active control technology

The emergence of highly reliable fly-by-wire flight control systems makes it possible to consider a strong reliance on automatic control systems in the design optimization of future aircraft. This design philosophy has been referred to as the control configured vehicle approach or the application of active control technology. Several studies and flight tests sponsored by the Air Force and NASA have demonstrated the potential benefits of control configured vehicles and active control technology. The present status and trends of active control technology are reviewed and the impact it will have on aircraft designs, design techniques, and the designer is predicted.

Rediess, H. A.↗
NASA NTRS1974

Modular design of the earth observatory satellite /EOS/

The next generation of earth observation satellites are planned to carry advanced optical and microwave sensors for application studies. Design concepts have evolved to a modular spacecraft systems approach which is compatible with Delta, Titan, and Space Shuttle launches, with in-flight Shuttle maintenance, and with Shuttle retrieval. Use of this modularized spacecraft for a variety of low-earth orbiting missions can provide high reliability at reduced costs.

Fischetti, T. L.↗
NASA NTRS1976

Automatic fire/weather data station

Prototype unmanned integrated system collects and processes fire-index data. System is based on state-of-the-art technology, utilizes low-cost hardware, and is highly reliable.

Lum, H., Jr.↗