Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hall effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Microstructurally Strained Pyrochlore–Perovskite Biphasic Electrocatalysts for the Oxygen Evolution Reaction

Efficiency of water splitting for hydrogen production is often limited by the sluggish kinetics of multiple electronic transfers required in the heterogeneous oxygen evolution reaction (OER). Catalyst design for reducing the high OER overpotential remains a major scientific challenge. Lattice-strain engineering, a method for tuning the electronic structure and surface geometric configuration of active sites, may greatly affect the interaction between adsorbates and catalytic surfaces for high activity and stability. Here, in this study, we present the synthesis of biphasic oxides of YPrSrRuMnO x , which consists of distinct phases of Y 2 Ru 2 O 7 pyrochlore and (Pr 0.7 Sr 0.3 )MnO 3 perovskite, and the development of a suitable analytical approach to study the strain–catalytic property relationship. Linear sweep voltammetry results reveal that the biphasic oxide exhibits approximately 3.1 times greater mass activity and 2.4 times larger turnover frequency (TOF) than single-phase Y 2 Ru 2 O 7 in the 0.1 M HClO 4 electrolyte. The biphasic catalyst is also about 3 times more stable than the single-phase oxide under acidic conditions. X-ray photoelectron spectroscopy, nitrogen isotherm, and electrochemical surface area analyses indicate that the oxidation state, specific surface area, and electrochemical surface area do not cause enough difference in the observed enhancement of OER performance. We examined the effects of microstrain on electrocatalysis, originating from lattice mismatch between different phases, using three different structural models. Specifically, we compared the Williamson–Hall method, standard stress–strain analysis, and Rietveld refinement in analyzing the structure–property relationship. Strain mapping using geometric phase analysis (GPA) further revealed significant microstrain and lattice dislocations localized near phase boundaries in the biphasic oxide, in contrast to the uniform strain in single-phase materials. The results reveal that the increased microstrain correlates well with the improved OER performance, as the biphasic oxide catalyst exhibits 2–3 times greater microstrain than Y 2 Ru 2 O 7 pyrochlore.

electrocatalysts↗
DOE OSTI2021

Magnetic and electron transport properties of Co 2 Si nanomagnets

In this study, magnetotransport and ferromagnetism in thin films of Co 2 Si nanoclusters are investigated experimentally and theoretically. The nanoclusters are fabricated by an inert-gas condensation-type cluster-deposition method and have an average size of 11.3 nm. Unlike the bulk Co 2 Si that exhibits a very weak net magnetic moment only below 10 K, the nanoclusters exhibit room-temperature ferromagnetism with a substantial saturation magnetization. Key features of the system are its closeness to the Stoner transition, magnetic moments induced by spin polarization starting from surface atoms, and nonuniaxial anisotropy associated with the orthorhombic crystal structure of Co 2 Si . A method is introduced to determine the effective anisotropy using the experimental magnetization data of this complex system and its relationship with the two lowest-order nonuniaxial anisotropy constants. On decreasing temperature from 300 K, the nanoclusters show electron-transport properties unusual for a ferromagnetic metal, including an increase of Hall resistivity and a nonmonotonic change of negative magnetoresistance with a peak at around 100 K. The underlying physics is explained on the basis of the large polarization of surface spins and variation in the degree of their misalignments due to temperature-dependent effective anisotropy.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Spin polarization engineering in 𝑑-wave altermagnets

Altermagnets host unconventional spin-polarized bands despite zero net magnetization, but controlling their spin structure remains challenging. Here, we theoretically propose a multifield approach to engineer spin polarization in 𝑑-wave altermagnets using gating, optical driving, and in-plane electric fields, which enable tunable and switchable polarizations along multiple directions. Optical driving induces out-of-plane (𝑧) polarization, while gating and in-plane fields generate 𝑥 and 𝑦 polarizations via the Edelstein effect, all of which are experimentally detectable. We further find that spin- and band-selective doping induces chiral optical activity, a feature unique to altermagnets. Our approach offers a versatile means to control the direction of spin polarization in altermagnets.

Floquet systems↗
DOE OSTI2025

Status of the PrimEx $\eta$ experiment at Jefferson Lab

The GlueX detector in the experimental Hall D at Jefferson Lab offers a unique opportunity to perform a measurement of the decay width of eta mesons through the Primakoff effect. The experiment complements the physics program at Jefferson Lab on measuring the decay width of light pseudoscalar mesons via the Primakoff process. The goal of the experiment is to measure differential cross sections of eta mesons at forward angles using a beam of tagged photons incident on a liquid 4He target, which will be used for the extraction of the decay width. This measurement is vital for understanding fundamental properties like the ratios of the light quark masses and the eta - eta' mixing angle, and will provide an important test of chiral symmetry breaking in QCD. Our experimental results will help reduce uncertainties on partial widths of all other eta decays. The experiment collected data during three physics runs between 2019 and 2022. We will give an overview of the PrimEx eta experiment and the current status of our data analyses. We will also discuss the feasibility of conducting future Primakoff measurements in light of the recent upgrade of the GlueX forward calorimeter and the potential accelerator energy upgrade to 22 GeV.

Somov, Alexander↗
DOE OSTI2026

Experimental Characterization and Modeling of High Hole Mobility GeSn Quantum Wells: The Role of Alloy Disorder Scattering

Understanding mechanisms influencing electrical transport in material systems not only provides a scientific explanation for observed behavior but also offers insight into ways to enhance transport in devices. This study reports experimental hole mobility of 8 x 10 4 cm 2 V -1 s -1 in a Ge 0.92 Sn 0.08 , the highest recorded mobility for the GeSn system. A study of the material's quality is presented using structural and electrical characterization techniques, with transport data being supported by simulations using an extensive modeling framework. Quantum Hall measurements further indicate the material's high quality and potential spintronic applications, with extracted values of 0.0689$m$ 0 and 13.6 for the effective mass and effective g‐factor, respectively. It is observed that transport is limited by alloy disorder scattering at cryogenic temperatures. A comparative study between the presented structure and similar quantum well heterostructures revealed that the difference in hole mobilities is captured by a disparity in the reduced nominal alloy disorder scattering potential (Δ U alloy = 0.8 eV), that is lower than the value of a fully random alloy (Δ U alloy = 1.4–1.7 eV) potential. The difference in Δ U alloy suggests that heterostructures with similar geometries and alloy compositions can have different alloy disorder scattering, implying that an underlying mechanism, such as short‐range order, may be responsible and warrants further investigation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Anomalously Large Seebeck Coefficient of CuFeS 2 Derives from Large Asymmetry in the Energy Dependence of Carrier Relaxation Time

The Seebeck effect in a material originates from the distribution of asymmetry in the electron transport under a temperature gradient, which has contributions from the energy-dependent electronic density-of-states and carrier mobility. However, because the energy dependence of common electron scattering mechanisms is weak, the mobility-driven Seebeck coefficient has long been ignored in most thermoelectric materials, and the energy asymmetry of the density-of-states has been considered the dominant contribution. In this work, we describe a hopping transport behavior observed in CuFeS 2 , and a large carrier Hall mobility gradient of dμH/dT that creates an unusually large energy-dependent mobility contribution to the Seebeck coefficient. This work offers several ideas regarding the mobility-driven Seebeck effect and its potential utilization in the design of thermoelectric materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Dynamic defect as nonradiative recombination center in semiconductors

We present a theory of nonradiative recombination (NRR) with an emphasis on the so far little-explored dynamic effect in the process. Here, we show that it can significantly enhance the NRR rate over that of a static midgap level as suggested by the Shockley-Read-Hall theory, whereby offering an alternative explanation to the long-lasting discrepancy between theory and experiment for semiconductors. As an illustration, we show that dynamic NRR can take place at the DX center in Si-doped GaAs which, combined with a modified ABC model at high carrier-density limit, makes it possible to verify the theory directly by experiment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Conceptual study on using Doppler backscattering to measure magnetic pitch angle in tokamak plasmas

We introduce a new approach to measure the magnetic pitch angle profile in tokamak plasmas with Doppler backscattering (DBS), a technique traditionally used for measuring flows and density fluctuations. The DBS signal is maximised when its probe beam's wavevector is perpendicular to the magnetic field at the cutoff location, independent of the density fluctuations [Hillesheim \emph{et al} 2022 \emph{Nucl. Fusion} \textbf{55} 073024]. Hence, if one could isolate this effect, DBS would then yield information about the magnetic pitch angle. By varying the toroidal launch angle, the DBS beam reaches cutoff with different angles with respect to the magnetic field, but with other properties remaining similar. Hence, the toroidal launch angle which gives maximum backscattered power is thus that which is matched to the pitch angle at the cutoff location, enabling inference of the magnetic pitch angle. We performed systematic scans of the DBS toroidal launch angle for repeated DIII-D tokamak discharges. Experimental DBS data from this scan were analysed and combined with Gaussian beam-tracing simulations using the Scotty code [Hall-Chen \emph{et al} 2022 \emph{Plasma Phys. Control. Fusion} \textbf{64} 095002]. The pitch-angle inferred from DBS is consistent with that from magnetics-only and motional-Stark-effect-constrained (MSE) equilibrium reconstruction in the edge. In the core, the pitch angles from DBS and magnetics-only reconstructions differ by one to two degrees, while simultaneous MSE measurements were not available. The uncertainty in these measurements was under a degree; we show that this uncertainty is primarily due to the error in toroidal steering, the number of toroidally separated measurements, and shot-to-shot repeatability. We find that the error of pitch-angle measurements can be reduced by optimising the poloidal launch angle and initial beam properties. Since DBS has high spatial and temporal resolutions, is non-perturbative, does not require neutral beams, and is likely robust to neutron damage of and debris on the first mirrors, using DBS to measure the pitch angle in future fusion energy systems is especially appealing.

beam tracing↗
DOE OSTI2023

Design and Analysis of a Floating-Wind Shallow-Water Mooring System Featuring Polymer Springs

This paper presents a mooring system design featuring polymer springs for the VolturnUS-S 15-MW reference floating wind turbine in site conditions for the New York Bight at a 50-m water depth. Polymer springs have a nonlinear stress-strain curve that allows a stiffer response at low loads and a more flexible response at higher loads, potentially reducing peak mooring line tensions. The mooring dynamics model MoorDyn has been extended to model springs with nonlinear tension-strain curves from a user-inputted look-up table. This MoorDyn modeling advancement is verified against OrcaFlex simulation results. Using MoorDyn's updated capabilities, a spring-equipped catenary mooring system is designed for the 15-MW floating system, along with a baseline catenary mooring system that does not use polymer springs. The floating wind turbine simulator OpenFAST is used to simulate the mooring systems in design-driving load cases to show the effect of polymer springs on key dynamic behaviours. The results show that the spring-equipped design reduces peak tensions by up to 60%, whereas the turbine offsets stay within a maximum of 7.2 m, which is still a reasonable offset limit for cable considerations. The reduction in peak tensions results in a significant decrease in damage equivalent loads - on the order of 50% for upwind lines in fully loaded conditions. These results show that polymer springs can effectively reduce peak tensions and fatigue loads in mooring systems at shallow water depths.

floating offshore wind↗
DOE OSTI2022

Design and Analysis of a Floating-Wind Shallow-Water Mooring System Featuring Polymer Springs: Preprint

In this paper, a mooring system featuring polymer springs is designed for the VolturnUS-S 15 MW reference floating wind turbine in site conditions for the New York Bight at a 50-m water depth. Polymer springs have a nonlinear stress-strain curve that allows a stiffer response at low loads and a more flexible response at higher loads, potentially reducing peak mooring line tensions. The mooring dynamics model MoorDyn has been extended to model springs with nonlinear tension-strain curves from a user-inputted look-up table. This MoorDyn modelling advancement is verified against OrcaFlex simulation results. Using MoorDyn's updated capabilities, a spring-equipped catenary mooring system is designed for the 15 MW floating system, along with a baseline catenary mooring system that does not use polymer springs. The floating wind turbine simulator OpenFAST is used to simulate the mooring systems in design-driving load cases to show the effect of polymer springs on key dynamic behaviours. The results show that the spring-equipped design reduces peak tensions by up to 60%, while the turbine offsets stay within a maximum of 7.2 m, which is still a reasonable offset limit for cable considerations. The reduction in peak tensions results in a significant decrease in damage equivalent loads, on the order of 50% for upwind lines in fully loaded conditions. These results show that polymer springs can effectively reduce peak tensions and fatigue loads in mooring systems at shallow water depths.

floating offshore wind↗
DOE OSTI2021

Nernst and Ettingshausen effects in gapped quantum materials

Here, we investigate whether there could exist topological invariants of gapped two-dimensional materials related to dissipationless thermoelectric transport at low temperatures. We give both macroscopic and microscopic arguments showing that thermoelectric transport coefficients vanish in the limit of zero temperature, and thus topological invariants arise only from the electric Hall conductance and the thermal Hall conductance. Our arguments apply to systems with arbitrarily strong interactions. We also show that there is no analog of the Thouless pump for entropy.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Coupled modeling of wake steering and platform offsets for floating wind arrays

Wake effects are a key challenge in the design and analysis of wind farms. For floating wind farms, the platforms offset under the aerodynamic loading of the turbine and are constrained by mooring systems that can vary significantly in allowable offsets. When considering wake steering, the crosswind offset of the turbine can counteract the lateral deflection of the wake. This work presents a tool to efficiently model the coupled impacts of wake steering and platform offsets for floating wind farms. The tool relies on the frequency-domain wind farm model RAFT and the steady-state wake model FLORIS. A verification with FAST.Farm is presented, then the tool is applied to a simple two-turbine case study. A range of mooring systems with increasing platform offsets and varied yaw misalignment angles are considered while comparing the impact on turbine power. Additional sensitivities to turbine spacing and mooring system orientation are explored. The results show that there is a least-optimal watch circle width for downwind turbine power production that varies with yaw misalignment angle and turbine spacing. Additionally, the turbine offsets under yaw-misaligned conditions vary significantly depending on mooring system orientation relative to the rotor plane, which in turn impacts the optimal misalignment angle. These results highlight the importance of including floating platform offsets and mooring systems in the evaluation of wake steering strategies for floating wind arrays.

17 WIND ENERGY↗
DOE OSTI2023

Optical N-plasmon: topological hydrodynamic excitations in graphene from repulsive Hall viscosity

Abstract Edge states occurring in Chern and quantum spin-Hall phases are signatures of the topological electronic band structure in two-dimensional (2D) materials. Recently, a new topological electromagnetic phase of graphene characterized by the optical N-invariant was proposed. Optical N-invariant arises from repulsive Hall viscosity in hydrodynamic many-body electron systems, distinct from the Chern and Z 2 invariants. In this paper, we introduce the topologically protected edge excitation—optical N-plasmon of interacting many-body electron systems in the topological optical N-phase. These optical N-plasmons are signatures of the topological plasmonic band structure in 2D materials. We demonstrate that optical N-plasmons exhibit unique dispersion relations, stability against various boundary conditions, and edge profiles when compared with the topologically trivial edge magneto plasmons. Based on the optical N-plasmon, we design an ultra sub-wavelength broadband topological hydrodynamic circulator, which is a chiral quantum radio-frequency circuit component crucial for information routing and interfacing quantum–classical computing systems. Furthermore, we reveal that optical N-plasmons can be effectively tuned by the neighboring dielectric environment without breaking the topological properties. Our work provides a smoking gun signature of topological electromagnetic phases occurring in 2D materials arising from repulsive Hall viscosity.

Physics↗
DOE OSTI2021

Transport coefficients for magnetic-field evolution in inviscid magnetohydrodynamics

The magnetized resistivity and electrothermal tensors when substituted into the induction equation lead to electrothermal magnetic field generation, resistive magnetic diffusion, and magnetic field advection due to resistivity gradients, temperature gradients and currents. Here, the advection terms driven by temperature gradient and current have cross-field components (perpendicular to both the magnetic field and the driving term) that depend on significantly modified versions of Braginskii’s transport coefficients. The improved fits to Braginskii’s coefficients given by Epperlein and Haines and Ji and Held give physically incorrect results for cross-field advection at small Hall parameters (product of cyclotron frequency and collision time). The errors in Epperlein and Haines’ fits are particularly severe, giving increasing advection velocities below a Hall parameter of one when they should decrease linearly to zero. Epperlein and Haines’ fits can also give erroneous advection terms due to variations in effective atomic number. The only serious error in Braginskii’s fits is an overestimate in advection due to perpendicular resistivity. New fits for the cross-field advection terms are obtained from a direct numerical solution of the Fokker-Planck equation and Ji and Held’s higher order expansion approach that are continuous functions of the effective atomic number.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Mapping the intrinsic photocurrent streamlines through micromagnetic heterostructure devices

Photocurrent in quantum materials is often collected at global contacts far away from the initial photoexcitation. This collection process is highly nonlocal. It involves an intricate spatial pattern of photocurrent flow (streamlines) away from its primary photoexcitation that depends sensitively on the configuration of current collecting contacts as well as the spatial nonuniformity and tensor structure of conductivity. Direct imaging to track photocurrent streamlines is challenging. Here, we demonstrate a microscopy method to image photocurrent streamlines through ultrathin heterostructure devices comprising platinum on yttrium iron garnet (YIG). We accomplish this by combining scanning photovoltage microscopy with a uniform rotating magnetic field. Here, local photocurrent is generated through a photo-Nernst type effect with its direction controlled by the external magnetic field. This enables the mapping of photocurrent streamlines in a variety of geometries that include conventional Hall bar-type devices, but also unconventional wing-shaped devices called electrofoils. In these, we find that photocurrent streamlines display contortion, compression, and expansion behavior depending on the shape and angle of attack of the electrofoil devices, much in the same way as tracers in a wind tunnel map the flow of air around an aerodynamic airfoil. This affords a powerful tool to visualize and characterize charge flow in optoelectronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗