Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geologic model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

A Nonconventional CO 2 -EOR Target in the Illinois Basin: Oil Reservoirs of the Thick Cypress Sandstone

The Illinois State Geological Survey (ISGS) identified and quantified nonconventional carbon dioxide (CO 2 ) enhanced oil recovery (EOR) target opportunities within the thick Cypress Sandstone in the Illinois Basin. Up to 60 m thick Cypress Sandstone bodies define a northeast-southwest fairway that is approximately 230 km long and 100 km wide across the central portion of the Illinois Basin. These sandstones commonly contain relatively thin oil reservoirs and were found to have associated underlying residual oil zones (ROZs). The presence of a thick brine aquifer underlying the ROZ and high vertical permeability results in characteristic low primary oil recovery caused by excessive brine production from the aquifer. Nonconventional CO 2 -EOR in these oil reservoirs are expected to require more CO 2 to produce a unit of oil compared to conventional CO 2 -EOR. Consequently, nonconventional CO 2 -EOR will have a higher storage component and offer a unique storage opportunity. An integrated approach of detailed site-specific geologic reservoir characterization, three-dimensional geocellular modeling, and reservoir simulation of multiple development cases at Noble Field was employed to determine development strategies for CO 2 -EOR and storage. The findings of Noble Field research were leveraged to assess the regional CO 2 -EOR and associated storage resource within the nonconventional reservoirs of the thick Cypress Sandstone in the Illinois Basin. Regional characterization shows that thick, multistory fluvial facies of the Cypress Sandstone exhibits porosity from 15% to 21% and horizontal and vertical permeability up to approximately 0.98 µm 2 (1,000 mD). Oil saturation indicators screened from well records and well log analyses were used to map 27 brownfield and greenfield ROZ prospects with residual oil saturation (S OR ) values ranging from 14 to 35%. ROZ thickness varies from 2.7 to 21.6 m (9 to 71 ft). The 27 Cypress Sandstone ROZ prospects have approximately 290.8 million m 3 (1.8 billion barrels) of oil in place. Specific CO 2 -EOR development strategies depend on the goals of the project (prioritizing EOR performance vs. storage performance and NCNO) and geologic setting (brownfield vs greenfield), and company’s business strategies (economic metrics). Nevertheless, applying two unique development strategies derived from reservoir simulation of the depleted main pay zone and ROZ in the Cypress Sandstone at Noble Field, 31.1 million m 3 (196 million barrels) of oil is estimated to be recoverable using the 80-acre blanket WAG development strategy (which favors EOR and economic metrics, but is carbon positive) whereas 21.3 million m 3 (144 million barrels) of oil is estimated to be recoverable using the 40-acre high CO 2 injection rate development strategy (which favors storage and economic metrics and results in net carbon negative oil production). Storage of CO 2 associated with EOR in these ROZ prospects alone, not accounting for associated main pay zones, underlying brine formation, or intervals adjacent to or between prospects, is estimated to be up to 10.4 billion tonnes using the latter development strategy.

02 PETROLEUM↗
DOE OSTI2018

Broadband (0–4 Hz) Ground Motions for a Magnitude 7.0 Hayward Fault Earthquake With Three‐Dimensional Structure and Topography

Abstract We performed fully deterministic broadband (0–4 Hz) high‐performance computing ground motion simulations of a magnitude 7.0 scenario earthquake on the Hayward Fault (HF) in the San Francisco Bay Area of Northern California. Simulations consider average one‐dimensional (1‐D) and three‐dimensional (3‐D) anelastic structure with flat and topographic free surfaces. Ground motion intensity measures (GMIMs) for the 3‐D model display dramatic differences across the HF due to geologic heterogeneity, with low wave speeds east of the HF amplifying motions. The median GMIMs agree well with Ground Motion Prediction Equations (GMPEs); however, the 3‐D model generates more scatter than the 1‐D model. Ratios of 3‐D/1‐D GMIMs from the same source allow isolation of path and site effects for the 3‐D model. These ratios show remarkably similar trends as site‐specific factors for the GMPE predictions, suggesting that wave propagation effects in our 3‐D simulations are on average consistent with empirical data.

58 GEOSCIENCES↗
NASA NTRS1993

Geology of the southern hemisphere of Triton: No polar cap

The bright southern hemisphere, comprising Uhlanga Regio, is perhaps the most poorly understood geologic province on Triton. The entire bright southern hemisphere has been described as a bright polar 'cap', implying a seasonal origin, or as a permanent geologic terrain distinct from the equatorial terrains. Also, thermal models have predicted seasonal migration of frosts and ices from the presently sun-lit south latitudes to the dark northern latitudes. The distribution of frosts and geologic history of this region must be determined observationally. We reexamine the geology of this terrain with the goal of answering these questions.

Schenk, P.↗
DOE OSTI2019

Adsorption of Tracer Gases in Geological Media: Experimental Benchmarking

The interaction of xenon with containment barriers can play a crucial role in the detection of underground nuclear explosions. Independent field experiments and laboratory-derived models have observed depressed surface level xenon concentrations and subsequently predicted geological capture rates. This work sought to experimentally verify those predictions by analyzing xenon transport though a two-bulb diffusion apparatus adapted for the study of geologic media. Novel to this work is the timescale over which these experiments were carried out, allowing the system to reach equilibrium, rather than relying on numerical models to treat the equilibrium concentration of each gas as a fit coefficient.

Byers, Maggie↗
DOE OSTI2021

Improving Subsurface Stress Characterization for Carbon Dioxide Storage Projects

Researchers at New Mexico Tech, Los Alamos National Laboratory (LANL), Sandia National Laboratory (SNL), and other collaborators are developing a methodology to improve characterization of stress in the subsurface by means of a model-based inversion of reservoir engineering data, time lapse seismic measurements, and microseismicity. Historically, various geophysical techniques have been used in efforts to understand the state of stress in the subsurface through direct and indirect imaging of stress sensitive features (faults and fractures) and observations of transient stress related observations (time variant elastic moduli and microseismicity). Standard direct and indirect techniques for seismic fault and fracture imaging suffer from detectability limits due to reliance on high data quality and multiplicity. Variations in effective elastic properties from inversion of high quality seismic (Vertical Seismic Profile (VSP)) data may be used to infer stress near the wellbore through integration with independent experimental characterization of the stress-velocity relationship. Given a sufficiently robust observation network, microseismic emissions may be inverted to characterize focal mechanisms which, together with supporting assumptions and constraints, inform estimates of in-situ stress. While each of these techniques contributes in part to the characterization of stress within limited spatial and temporal domains, no one method provides an unambiguous stress measurement or a predictive capability over a site scale spatial extent. Challenges associated with solution non-uniqueness, measurement ambiguity, and irregular sampling may be greatly minimized through combination of one or more of independent measurements within a common framework in which realistic geological, hydrodynamic, geomechanical, and seismological constituent process models may act as constraints.

02 PETROLEUM↗
DOE OSTI2019

Progress in Deep Geologic Disposal Safety Assessment in the U.S. since 2010

The Spent Fuel and Waste Science and Technology (SFWST) Campaign of the U.S. Department of Energy (DOE) Office of Nuclear Energy (NE), Office of Spent Fuel & Waste Disposition (SFWD) is conducting research and development (R&D) on geologic disposal of spent nuclear fuel (SNF) and high-level nuclear waste (HLW). Two high priorities for SFWST disposal R&D are design concept development and disposal system modeling (DOE 2011, Table 6). These priorities are directly addressed in the SFWST Geologic Disposal Safety Assessment (GDSA) work package, which is charged with developing a disposal system modeling and analysis capability for evaluating disposal system performance for nuclear waste in geologic media.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

A manifold learning perspective on surrogate modeling of nitrate concentration in the Kansas River

Abstract A non-linear surrogate model of nitrate concentration in the Kansas River (USA) is described. The model is an (almost) Piece-wise Linear response surface that provides a mean field approximation to the dynamics of the measured data for nitrate plus nitrite (target product) correlations to turbidity and chlorophyll-a concentrations (input variables). The method extends the United States Geological Survey’s linear procedures for surrogate data modeling allowing for better approximations for river systems exhibiting algal blooms due to nutrient-rich source waters. The model and visualization procedures illustrated in the Kansas River example should be generally applicable to many medium-size rivers in agricultural regions.

Tufillaro, Nicholas (ORCID:0009000628968832)↗
DOE OSTI2023

Groundwater and Surface Water Flow (GSFLOW) model files for the East River, Colorado

The data package contains model input files and executables for the East River, Colorado (750 km2) located in the headwaters of the Upper Colorado River Basin. The code applied is the U.S. Geological Survey (USGS) Groundwater and Surface Water Flow (GSFLOW) model. The model contains a 100-m grid resolution to represent topographic complexity and a daily timestep accounts for energy and water partitioning between the snowpack, vegetation, soil zone and bedrock. The land surface model is dynamically linked to a three-dimensional groundwater flow model that allows for streamflow gaining and losing conditions. The groundwater model accounts for nine stratigraphic units and extends 400 m below land surface. Using this modeling framework we explore historical water budgets (water year 1987-2022) and the influence of seasonal warming and associated mechanisms driving groundwater declines and streamflow loss. A Readme_062424.txt file provides instructions on how to download all files. Input and output files are provided for the historical simulation representative of water years 1987 to 2022 (i.e. baseline) and the all-year +4C warming scenario. Instructions are provided to run the seasonal warming scenarios with warming applied only to the autumn, winter, spring or summer months. Modeled output used in figures for Carroll et al., 2024 are also provided with metadata describing where these data were obtained. This dataset additionally includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata; and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type.Updated on 06-24-2024: The dataset was updated to include model outputs (updated base.zip and 4C.zip files), figure source files (Figure_Source_Files.zip), an updated Readme file (Readme_062424.txt), climate input files (climate_input_files.zip), and the adoption of ESS-DIVE File Level Metadata and CSV reporting formats (inclusion of flmd.csv and dd.csv files).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Modeling Stress-Induced Pore Water Pressures in The Vadose Zone Beneath a Composite-Lined Landfill - 20029

A finite-element model was developed to evaluate mechanisms contributing to positive pore pressures measured with sealed pressure transducers in the geological buffer beneath the Environmental Management Waste Management Facility, a composite-lined mixed waste disposal facility operated by the US Department of Energy. The geological buffer is a 3-m-thick engineered fine-textured layer directly beneath the Environmental Management Waste Management Facility's composite liner, and above the groundwater table. The model accounts for changes in pore water pressure resulting from (i) loading imposed by waste placed on the overlying liner, (ii) moistening of the geological buffer due to equilibration with the underlying geological materials, and (iii) fluctuations in the elevation of the underlying groundwater table. Pore water pressures predicted by the model are in good agreement with pore water pressures measured in the field. The predictions confirm that positive pore water pressures recorded by the sealed pressure transducers in the geological buffer are excess pore water pressures induced by the vertical normal stress imposed by waste placed on the liner, and are not due to a rise in the groundwater table. Simulations also showed that two additional years of filling would further increase the pore water pressure without any change in elevation of the groundwater table. The geological buffer remained unsaturated during the simulation, with a B-coefficient (parameter indicative of the degree of saturation) similar to that computed from the field-measured pore water pressures and waste filling records. Larger increases in pore water pressure were observed when the geological buffer was assumed to have higher initial saturation, as was observed in the field data. Incorporating seasonal fluctuations in the groundwater table beneath the geological buffer in the model resulted in predictions of small seasonal oscillation in the pore water pressure at the measurement location, similar to seasonal oscillations observed in the field. Predictions made with the model indicate that the dissipation of the excess pore water pressures will occur over decades due to the low hydraulic conductivity of the geological buffer material. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

NETL CO 2 Storage prospeCtive Resource Estimation Excel aNalysis (CO 2 -SCREEN) User’s Manual

This user’s manual guides the use of the National Energy Technology Laboratory’s (NETL) CO 2 Storage prospeCtive Resource Estimation Excel aNalysis (CO 2 -SCREEN) tool, which was developed to aid users screening saline formations for prospective CO 2 storage resources. CO 2 -SCREEN applies U.S. Department of Energy (DOE) methods and equations for estimating prospective CO 2 storage resources for saline formations. CO 2 -SCREEN was developed to be substantive and user-friendly. It also provides a consistent method for calculating prospective CO 2 storage resources that allows for consistent comparison of results between different research efforts, such as the Regional Carbon Sequestration Partnerships (RCSP). CO 2 -SCREEN consists of an Excel spreadsheet containing geologic inputs and outputs, linked to a GoldSim Player model that calculates prospective CO 2 storage resources via Monte Carlo simulation.

47 OTHER INSTRUMENTATION↗
NASA NTRS1994

Bell Regio, Venus: Integration of remote sensing data and terrestrial analogs for geologic analysis

The geology and surface morphology of Bell Regio (18-42 deg N, 32-58 deg E) are investigated using a combination of Magellan, Venera, and analogous terrestrial data. The properties of surface units are compared to either direct terrestrial analog measurements or to the behaviors predicted by theoretical models. Five major volcanic sources are identified from geologic mapping (Tepev Mons, Nefertiti corona, a large shield volcano east of Tepev, and two small edifices southeast of Tepev). The volcano Api Mons lies northeast of the main Bell uplift. The oldest volcanic units are associated with an extensive low shield volcano east of Tepev Mons and a small edifice southeast of Tepev. The annular flow apron of Tepev Mons formed next, with volcanism at a second small edifice on the southeast flank of Tepev Mons producing the youngest flow units. Comparisons between Magellan data, terrestrial radar images, and field topography profiles suggest that only three units resemble terrestrial a'a flows; the remainder are consistent with smoother pahoehoe-type surfaces. This suggests that most of the flow units were erupted at relatively low volume effusion rates (less than 100 cu m/sec) over long periods of time or had very low viscosities

Campbell, Bruce A.↗
DOE OSTI2020

Grimsel Test Site - A Successful International Underground Research Laboratory for Many Decades - 20429

For more than 35 years, Nagra and its partners from around the world have been conducting underground research projects at the Grimsel Test Site (GTS, www.grimsel.com) to contribute to the development and confirmation of safe geological disposal concepts and for the characterization of suitable host rock formations. Over the years, the results of this internationally recognized research program have been, and continue to be, incorporated directly into exploration programs, modelling, safety, and engineering feasibility studies on options for deep geological repositories. Each project of the GTS program involves field-testing, laboratory studies, design and modelling tasks, and integrates all scientific and technical aspects. Each project phase is planned with a duration of three to five years to facilitate practical and administrative aspects and allow flexibility for updating the overall project plans with the latest findings. Scientific and engineering interaction among the different projects is ensured via an international steering committee meeting. Hosting an IAEA level C radiation- controlled zone, which allows use of radionuclides, including actinides such as thorium, uranium, neptunium, plutonium and americium, in in-situ experiments is one of the reasons why GTS also developed as a center of excellence for work with radioactive tracers under realistic in-situ boundary conditions. Last year, a new five-year program (2019 to 2023) started which includes projects with a planning horizon of decades. The new five-year program includes a new phase of in-situ experiments using radionuclides such as migration experiments in the Colloid Formation and Migration project (CFM), the Long-Term Diffusion experiment (LTD) and the newly established C-14 and I-129 Migration in cement project (CIM). The 'High Temperature effects on Bentonite' (HotBENT) project is starting in the current phase and is studying the effects of elevated temperatures (>175 deg. C) on bentonite materials. As a generic underground research laboratory (URL) it is expected that the GTS will provide in the coming years a platform for international collaboration, knowledge development and knowledge transfer for the next generation of scientists and engineers in the area of radioactive waste disposal and geosciences. A key role regarding knowledge transfer and training is provided by the well-established Grimsel Training Center (GTC), which (beside many URL related issues) also covers many general aspects of radioactive waste management. In this paper we provide an overview of the current program at the GTS, focusing on the experiments that study the migration of radionuclides through engineered barrier materials and the geosphere. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2015

Generalized Multiscale Finite-Element Method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media

It is important to develop fast yet accurate numerical methods for seismic wave propagation to characterize complex geological structures and oil and gas reservoirs. However, the computational cost of conventional numerical modeling methods, such as finite-difference method and finite-element method, becomes prohibitively expensive when applied to very large models. We propose a Generalized Multiscale Finite-Element Method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media, where we construct basis functions from multiple local problems for both the boundaries and interior of a coarse node support or coarse element. The application of multiscale basis functions can capture the fine scale medium property variations, and allows us to greatly reduce the degrees of freedom that are required to implement the modeling compared with conventional finite-element method for wave equation, while restricting the error to low values. We formulate the continuous Galerkin and discontinuous Galerkin formulation of the multiscale method, both of which have pros and cons. Applications of the multiscale method to three heterogeneous models show that our multiscale method can effectively model the elastic wave propagation in anisotropic media with a significant reduction in the degrees of freedom in the modeling system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Data from: 'Abiotic influences on continuous conifer forest structure across a subalpine watershed'

This package archives the core data used for analysis and inference in 'Abiotic influences on continuous conifer forest structure across a subalpine watershed' (Worsham et al., 2025). All data were collected in the East River, Washington Gulch, Slate River, and Coal Creek watersheds of Colorado. In the paper, we quantified the relative influence of climate, topographic, edaphic, and geologic factors on conifer stand structure and composition, and their functional relationships, at the watershed scale. We used waveform LiDAR data to derive spatially continuous stand structure metrics. We fused these with a species-level classification map to estimate tree species abundance. We applied generalized additive and generalized boosted models to evaluate the covariability of structural and compositional metrics with abiotic variables. The package contains the essential products required for reproducing our analysis and the tables and figures reported in the publication. The products comprise four classes: (1) geospatial data, (2) tabular data used for inferential analysis, (3) tabular data describing analytical results and performance statistics, and (4) a data user guide. (1) includes discretized waveform LiDAR data, locations and attributes of individual tree crowns, sampling locations and domain boundaries, a canopy height model, and raster files of estimated forest structural and compositional metrics at 100 m grid scale. (2) includes all response and explanatory variable values applied in inferential models. Response variables include conifer forest stand density, basal area, 95th percentile height, quadratic mean diameter, and others. Explanatory variables include climatic water deficit, actual evapotranspiration, elevation, heat load, soil available water content, and others. (3) includes results of training and testing several individual tree detection (ITD) algorithms, as well as inferential modeling results. (4) is a PDF user guide for this data package, including detailed descriptions and data dictionaries for all files. The data package root contains 17 assets: 8 compressed tape archive (.tar.gz) files, 5 comma-separated values (.csv) files, 3 Geographic Tagged Image File Format (GeoTIFF) (.tif) files, and 1 Portable Document Format (.pdf) file. The compressed .tar.gz archives contain ESRI shapefiles (.shp) .tif, compressed LASer (.laz), and .csv files. The archives must first be decompressed using the widely distributed command-line software utility TAR. All other files, including constituent files within the .tar.gz archives, can be opened in the open-source R statistical computing environment. Alternatively, .csv files may also be read in any simple text editor software or Microsoft Excel. Geospatial files including .shp and .tif files can also be opened in GIS software, such as QGIS (open-source) or ESRI ArcGIS (proprietary). The .pdf Data User Guide can be read with Adobe Acrobat Reader or other compatible readers.

2018 NEON and 2025 CHESS Campaigns↗
DOE OSTI2024

GDSA Framework Development and Process Model Integration FY2024

The Disposal Research & Development (Disposal R&D) Campaign of the U.S. Department of Energy (DOE) Office of Nuclear Energy (NE), Office of Spent Fuel & High-Level Waste Disposition is conducting research and development (R&D) on geologic disposal of spent nuclear fuel (SNF) and high-level nuclear waste (HLW). A high priority for Disposal R&D is disposal system modeling (Sassani et al. 2023). The Geologic Disposal Safety Assessment (GDSA) work package is charged with developing a disposal system modeling and analysis capability for evaluating generic disposal system performance for nuclear waste in geologic media.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1991

The Geologic Remote Sensing Field Experiment (GRSFE): The first geology multisensor airborne campaign

The primary objective of the Geologic Remote Sensing Field Experiment (GRSFE) is to acquire relevant data for geological sites that can be used to test models for extraction of surface property information from remote sensing data for earth, Mars and Venus in support of the Earth Observing System (EOS), Mars Observer, and Magellan, respectively. Over forty scientists from eight universities and three NASA centers are participating in GRSFE which is co-sponsored by the NASA Planetary Geology and Geophysics Program and the NASA Geology Program. Highlights of the airborne campaign included the first simultaneous acquisition of Airborne Visible and Infrared Imaging Spectrometer (AVRIS) and Thermal Infrared Multispectral Scanner (TIMS) data on September 29, 1989, and acquisition of Advanced Solid-State Array Spectroradiometer (ASAS), Polarimetric Synthetic Aperture Radar (AIRSAR), and Airborne Terrain Laser Altimeter System (ATLAS) data all within three months of each other. The sites covered were Lunar Crater Volcanic Field and Fish Lake Valley in Nevada; and Cima Volcanic Field, Death Valley, and Ubehebe Crater in California. Coincident field measurements included meteorological and atmospheric measurements, visible/near-infrared and thermal spectra, and characterization of geology and vegetation cover. The GRSFE airborne and field data will be reduced to a suite of standard products and submitted, along with appropriate documentation, to the Planetary Data System (PDS) and the Pilot Land Data System (PLDS). These data will be used for a variety of investigations including paleoclimatic studies in the arid southwestern United States, and analysis of Magellan data. GRSFE data will also be used to support Mars Observer Laser Altimeter (MOLA) and Mars Rover Sample Return (MRSR) simulation studies.

Evans, Diane L.↗
DOE OSTI2024

SMART – A Comprehensive Research and Development Program to Demonstrate Application of Machine Learning for Supporting CCS Deployment

Presentation material for a paper presented at the GHGT-17 conference, Calgary, Canada, October 20-24, 2024. The objective of the US Department of Energy’s SMART Initiative, i.e., Science-informed Machine Learning (ML) for Accelerating Real-Time Decisions in Subsurface Applications, is to showcase how the utilization of ML can significantly improve efficiency and effectiveness of field-scale commercial carbon storage operations. This paper will present the results from the current phase of SMART (field deployment) for demonstrating the applicability of ML-based tools and workflows for: (a) virtual learning during the pre-injection permitting phase, (b) advanced storage reservoir imaging to better characterize fractures and faults, and (c) dynamic storage reservoir modelling and optimization to inform operational decision making and visualization of system evolution.

CO2 geologic storage↗