Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “general linear methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Stability and bifurcation analysis of oscillators with piecewise-linear characteristics - A general approach

A general approach is developed for determining the periodic solutions and their stability of nonlinear oscillators with piecewise-smooth characteristics. A modified harmonic balance/Fourier transform procedure is devised for the analysis. The procedure avoids certain numerical differentiation employed previously in determining the periodic solutions, therefore enhancing the reliability and efficiency of the method. Stability of the solutions is determined via perturbations of their state variables. The method is applied to a forced oscillator interacting with a stop of finite stiffness. Flip and fold bifurcations are found to occur. This led to the identification of parameter ranges in which chaotic response occurred.

Noah, S. T.↗

Space-Dependent Wielandt Shift Methods for Multigroup Diffusion Eigenvalue Problems

In the calculation of neutronic eigenfunctions and eigenvalues, it is often desirable to approximate the neutron transport equation by a diffusion equation that requires significantly less computational resources to solve. Even when a full transport solution is needed, the solution of the diffusion system can be used to accelerate iterative methods for calculating the transport eigenfunction and eigenvalue. The convergence rate of the basic power iteration method for eigenvalue problems is governed by the dominance ratio; realistic reactor core problems often have high dominance ratios and the power iteration method can converge slowly as a result. A common technique for accelerating the convergence of power iteration is the Wielandt shift (WS) method, which reduces the dominance ratio by 'shifting' the eigenvalue spectrum using an estimate of the desired eigenvalue. WS provides a significant speedup over power iteration if the eigenvalue estimate is close to the true eigenvalue, but it can be difficult to obtain such an estimate. In practice, the shift in the WS method can be dynamically updated in the iteration scheme, in a way that depends on the eigenvalue estimates from the most recent iterations. We present a physically-motivated Space-Dependent Wielandt Shift (SDWS) for solving multigroup diffusion eigenvalue problems. The space-dependence of the eigenvalue shift in SDWS enables a more effective acceleration of the power iteration scheme than WS at the beginning of the iteration scheme, when the current estimate of the eigenvalue is not close to the actual eigenvalue. Several variants of SDWS are discussed here, including an SDWS method that combines the strengths of SDWS (in the early iterations) with those of standard WS (in the later iterations). Numerical results from a 1-D multigroup diffusion problem demonstrate an order of magnitude speedup over power iteration and a 41% speedup over a standard WS technique. This speedup is problem-dependent and appears to be greater for 'more difficult' problems. In this summary, the term 'speedup' refers to a reduction in the number of iterations required to converge to the correct eigenvalue and eigenfunction. Because the scattering is treated fully implicitly (i.e., it is part of the left-hand side of the diffusion system and directly inverted), the computational cost of a single iteration does not vary significantly among the methods discussed in this summary. The number of iterations is therefore representative of the total computational cost for a method. We acknowledge that certain iterative solvers for linear systems (e.g., GMRES) require more computational time to converge when the system is nearly singular (i.e., when a very aggressive Wielandt shift is applied). Nonetheless, when using SDWS in the manner described in this summary, we have seen that the reduction in computational time from reducing the number of power iterations generally outweighs the extra computational time required by iterative solvers such as GMRES. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SU-G-BRB-02: An Open-Source Software Analysis Library for Linear Accelerator Quality Assurance

Purpose: Routine linac quality assurance (QA) tests have become complex enough to require automation of most test analyses. A new data analysis software library was built that allows physicists to automate routine linear accelerator quality assurance tests. The package is open source, code tested, and benchmarked. Methods: Images and data were generated on a TrueBeam linac for the following routine QA tests: VMAT, starshot, CBCT, machine logs, Winston Lutz, and picket fence. The analysis library was built using the general programming language Python. Each test was analyzed with the library algorithms and compared to manual measurements taken at the time of acquisition. Results: VMAT QA results agreed within 0.1% between the library and manual measurements. Machine logs (dynalogs & trajectory logs) were successfully parsed; mechanical axis positions were verified for accuracy and MLC fluence agreed well with EPID measurements. CBCT QA measurements were within 10 HU and 0.2mm where applicable. Winston Lutz isocenter size measurements were within 0.2mm of TrueBeam’s Machine Performance Check. Starshot analysis was within 0.2mm of the Winston Lutz results for the same conditions. Picket fence images with and without a known error showed that the library was capable of detecting MLC offsets within 0.02mm. Conclusion: A new routine QA software library has been benchmarked and is available for use by the community. The library is open-source and extensible for use in larger systems.

43 PARTICLE ACCELERATORS↗

Review and evaluation of recent developments in melic inlet dynamic flow distortion prediction and computer program documentation and user's manual estimating maximum instantaneous inlet flow distortion from steady-state total pressure measurements with full, limited, or no dynamic data

A review of the Melick method of inlet flow dynamic distortion prediction by statistical means is provided. These developments include the general Melick approach with full dynamic measurements, a limited dynamic measurement approach, and a turbulence modelling approach which requires no dynamic rms pressure fluctuation measurements. These modifications are evaluated by comparing predicted and measured peak instantaneous distortion levels from provisional inlet data sets. A nonlinear mean-line following vortex model is proposed and evaluated as a potential criterion for improving the peak instantaneous distortion map generated from the conventional linear vortex of the Melick method. The model is simplified to a series of linear vortex segments which lay along the mean line. Maps generated with this new approach are compared with conventionally generated maps, as well as measured peak instantaneous maps. Inlet data sets include subsonic, transonic, and supersonic inlets under various flight conditions.

Schweikhard, W. G.↗

A multi-point inverse airfoil design method based on conformal mapping

An exact method of multipoint inverse airfoil design for incompressible flow is presented. Multipoint design is handled by dividing the airfoil into a number of desired segments. For each segment the velocity distribution is prescribed together with an angle of attack at which the prescribed velocity distribution is to be achieved. In this manner, multipoint design objectives can be taken into account in the initial specification of the velocity distribution. In order for the multipoint inverse airfoil design problem to be well posed, three integral constraints and several conditions arise which must be satisfied. Further restrictions are imposed if the airfoil is to have a specified pitching moment, thickness ratio, or other constraints. The system of equations is solved partly as a linear system and partly through multidimensional Newton iteration. Since the velocity distribution is prescribed about the circle in the angular coordinate, specification of the velocity in terms of arc length is handled through the multidimensional Newton iteration as well. The current formulation sets the stage for a more general multipoint inverse airfoil design method in which it will be possible to specify the velocity distribution, some boundary-layer development, or the surface geometry along a segment.

Selig, Michael S.↗

A transformed path integral approach for solution of the Fokker–Planck equation

A novel path integral (PI) based method for solution of the Fokker–Planck equation is presented. The proposed method, termed the transformed path integral (TPI) method, utilizes a new formulation for the underlying short-time propagator to perform the evolution of the probability density function (PDF) in a transformed computational domain where a more accurate representation of the PDF can be ensured. The new formulation, based on a dynamic transformation of the original state space with the statistics of the PDF as parameters, preserves the non-negativity of the PDF and incorporates short-time properties of the underlying stochastic process. New update equations for the state PDF in a transformed space and the parameters of the transformation (including mean and covariance) that better accommodate nonlinearities in drift and non-Gaussian behavior in distributions are proposed (based on properties of the SDE). Owing to the choice of transformation considered, the proposed method maps a fixed grid in transformed space to a dynamically adaptive grid in the original state space. The TPI method, in contrast to conventional methods such as Monte Carlo simulations and fixed grid approaches, is able to better represent the distributions (especially the tail information) and better address challenges in processes with large diffusion, large drift and large concentration of PDF. Additionally, in the proposed TPI method, error bounds on the probability in the computational domain can be obtained using the Chebyshev's inequality. The benefits of the TPI method over conventional methods are illustrated through simulations of linear and nonlinear drift processes in one-dimensional and multidimensional state spaces. The effects of spatial and temporal grid resolutions as well as that of the diffusion coefficient on the error in the PDF are also characterized.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Monte Carlo simulation of elongating metallic nanowires in the presence of surfactants

Nanowires of different metals undergoing elongation were studied by means of canonical Monte Carlo simulations and the embedded atom method representing the interatomic potentials. The presence of a surfactant medium was emulated by the introduction of an additional stabilization energy, represented by a parameter Q. Several values of the parameter Q and temperatures were analyzed. In general, it was observed for all studied metals that, as Q increases, there is a greater elongation before the nanowire breaks. In the case of silver, linear monatomic chains several atoms long formed at intermediate values of Q and low temperatures. Similar observations were made for the case of silver-gold alloys when the medium interacted selectively with Ag.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of linear prolongation to coarse mesh finite difference acceleration in CASMO5

The Coarse-Mesh Finite Difference (CMFD) method has been used for over a decade to accelerate the convergence of the Method of Characteristics (MOC) solution to the two- dimensional particle transport equation in CASMO5. Numerical testing, along with widespread use in production-level calculations, have shown that the current CMFD implementation provides stability and robustness for a wide range of realistic reactor physics problems. However, the recent development of linear prolongation has attracted attention from the community as a way to further improve the performance and stability of CMFD. Two interpolation methods for linear prolongation are presented in this work and implemented into a test version of CASMO5. The performance of the proposed interpolations, referred to as the bilinear and linear directional schemes, is evaluated in terms of runtime relative to the default constant or uniform scaling update. Numerical results indicate that the use of linear prolongation can reduce the transport solver runtime on average by approximately 10% when tested with two hundred randomly selected cases. The new directional linear interpolation, combined with default constant boundary updates, is found to provide the highest reduction in runtime for the cases analyzed. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The application of general aerodynamic lifting surface elements to problems in unsteady transonic flow

A study was conducted to investigate the feasibility of using combined subsonic and supersonic linear theory as a means for solving unsteady transonic flow problems in an economical and yet realistic manner. With some modification, existing linear theory methods are combined into a single program and a simple algorithm is derived for determining interference between lifting surface elements of different Mach number. The method is applied to a wide variety of problems for which measured unsteady pressure distributions and Mach number distributions are available. By comparing theory and experiment, the transonic method solutions show a significant improvement over uniform flow solutions. It is concluded that with these refinements the method will provide a means for performing realistic transonic flutter and dynamic response analyses at costs which are compatible with current linear theory based solutions.

Cunningham, A. M., Jr.↗

Investigation of the Thermodynamic and Electronic Properties of Double Perovskite Ca{sub 2}CoNbO{sub 6}

In the present work, a self-consistent ab initio calculation using the full-potential linearized augmented plane wave (FP-LAPW) method within the framework of the spin-polarized density functional theory (DFT) was used to study the structural, electronic, and thermodynamic properties of Ca{sub 2}CoNbO{sub 6} double perovskite compound. The generalized gradient approximation (GGA) described by Perdew–Burke–Ernzerhof (PBE) and GGA + U were used. The results obtained for the electronic properties show a ferrimagnetic and half-metallic behavior of the compound. The novelty of our work is the study of the thermodynamic properties of Ca{sub 2}CoNbO{sub 6} double perovskite such as heat capacity and Debye temperature which showed an important effect of pressure compared to the temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Infinite families of position-dependent mass Schrödinger equations with known ground and first excited states

A construction method of infinite families of quasi-exactly solvable position-dependent mass Schrödinger equations with known ground and first excited states is proposed in a deformed supersymmetric background. Such families correspond to extensions of known potentials endowed with a deformed shape invariance property. Two different approaches are combined. The first one is a generating function method, which enables to construct the first two superpotentials of a deformed supersymmetric hierarchy, as well as the first two partner potentials and the first two eigenstates of the first potential, from some generating function W + (x) [and its accompanying function W - (x)]. The second approach is the conditionally deformed shape invariance method, wherein the deformed shape invariance property of the starting potentials is generalized to their extensions by adding some constraints on the parameters and by imposing compatibility conditions between sets of constraints. Detailed results are given for some extensions of the linear and radial harmonic oscillators, as well as the Kepler–Coulomb and Morse potentials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical schemes for dynamically orthogonal equations of stochastic fluid and ocean flows

The quantification of uncertainties is critical when systems are nonlinear and have uncertain terms in their governing equations or are constrained by limited knowledge of initial and boundary conditions. Such situations are common in multiscale, intermittent and non-homogeneous fluid and ocean flows. The dynamically orthogonal (DO) field equations provide an adaptive methodology to predict the probability density functions of such flows. The present work derives efficient computational schemes for the DO methodology applied to unsteady stochastic Navier-Stokes and Boussinesq equations, and illustrates and studies the numerical aspects of these schemes. Semi-implicit projection methods are developed for the mean and for the DO modes, and time-marching schemes of first to fourth order are used for the stochastic coefficients. Conservative second-order finite-volumes are employed in physical space with new advection schemes based on total variation diminishing methods. Other results include: (i) the definition of pseudo-stochastic pressures to obtain a number of pressure equations that is linear in the subspace size instead of quadratic; (ii) symmetric advection schemes for the stochastic velocities; (iii) the use of generalized inversion to deal with singular subspace covariances or deterministic modes; and (iv) schemes to maintain orthonormal modes at the numerical level. To verify our implementation and study the properties of our schemes and their variations, a set of stochastic flow benchmarks are defined including asymmetric Dirac and symmetric lock-exchange flows, lid-driven cavity flows, and flows past objects in a confined channel. Different Reynolds number and Grashof number regimes are employed to illustrate robustness. Optimal convergence under both time and space refinements is shown as well as the convergence of the probability density functions with the number of stochastic realizations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Detecting chaos in particle accelerators through the frequency map analysis method

The motion of beams in particle accelerators is dominated by a plethora of non-linear effects, which can enhance chaotic motion and limit their performance. The application of advanced non-linear dynamics methods for detecting and correcting these effects and thereby increasing the region of beam stability plays an essential role during the accelerator design phase but also their operation. After describing the nature of non-linear effects and their impact on performance parameters of different particle accelerator categories, the theory of non-linear particle motion is outlined. The recent developments on the methods employed for the analysis of chaotic beam motion are detailed. In particular, the ability of the frequency map analysis method to detect chaotic motion and guide the correction of non-linear effects is demonstrated in particle tracking simulations but also experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Production and dosimetry of simultaneous therapeutic photons and electrons beam by linear accelerator: A Monte Carlo study

Depending on the location and depth of tumor, the electron or photon beams might be used for treatment. Electron beam have some advantages over photon beam for treatment of shallow tumors to spare the normal tissues beyond of the tumor. In the other hand, the photon beam are used for deep targets treatment. Both of these beams have some limitations, for example the dependency of penumbra with depth, and the lack of lateral equilibrium for small electron beam fields. In first, we simulated the conventional head configuration of Varian 2300 for 16 MeV electron, and the results approved by benchmarking the Percent Depth Dose (PDD) and profile of the simulation and measurement. In the next step, a perforated Lead (Pb) sheet with 1mm thickness placed at the top of the applicator holder tray. This layer producing bremsstrahlung x-ray and a part of the electrons passing through the holes, in result, we have a simultaneous mixed electron and photon beam. For making the irradiation field uniform, a layer of steel placed after the Pb layer. The simulation was performed for 10×10, and 4×4 cm2 field size. This study was showed the advantages of mixing the electron and photon beam by reduction of pure electron's penumbra dependency with the depth, especially for small fields, also decreasing of dramatic changes of PDD curve with irradiation field size.

61 RADIATION PROTECTION AND DOSIMETRY↗

Stability criterion for Gaussian pulse propagation through negative index materials

We analyze the dynamics of propagation of a Gaussian light pulse through a medium having a negative index of refraction employing the recently reported projection operator technique. The governing modified nonlinear Schroedinger equation, obtained by taking into account the Drude dispersive model, is expressed in terms of the parameters of Gaussian pulse, called collective variables, such as width, amplitude, chirp, and phase. This approach yields a system of ordinary differential equations for the evolution of all the pulse parameters. We demonstrate the dependence of stability of the fixed-point solutions of these ordinary differential equations on the linear and nonlinear dispersion parameters. In addition, we validate the analytical approach numerically utilizing the method of split-step Fourier transform.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum Simulation of Open Quantum Systems Using a Unitary Decomposition of Operators

Electron transport in realistic physical and chemical systems often involves the nontrivial exchange of energy with a large environment, requiring the definition and treatment of open quantum systems. Because the time evolution of an open quantum system employs a nonunitary operator, the simulation of open quantum systems presents a challenge for universal quantum computers constructed from only unitary operators or gates. Here, we present a general algorithm for implementing the action of any nonunitary operator on an arbitrary state on a quantum device. We show that any quantum operator can be exactly decomposed as a linear combination of at most four unitary operators. We demonstrate this method on a two-level system in both zero and finite temperature amplitude damping channels. Furthermore, the results are in agreement with classical calculations, showing promise in simulating nonunitary operations on intermediate-term and future quantum devices.

74 ATOMIC AND MOLECULAR PHYSICS↗

Indigo: A Domain-Specific Language for Fast, Portable Image Reconstruction

© 2018 IEEE. Linear operators used in iterative methods like conjugate gradient have typically been implemented either as ''matrix-driven'' subroutines backed by explicit sparse or dense matrices, or as ''matrix-free'' subroutines that implement specific linear operations directly (e.g. FFTs). The matrix-driven approach is generally more portable because it can target widely-Available BLAS libraries, but it can be inefficient in terms of time and space complexity. In contrast, the matrix-free approach is more performant because it leverages structure in operations, but it requires each operator be re-implemented on each new platform. To increase performance and portability, we propose a hybrid approach that represents linear operators as expression trees. Leaf nodes in the tree are either matrix-free or matrix-driven operators, and interior nodes represent mathematical compositions (sums, products, transposes) or structural compositions (stacks, block diagonals, etc.) of the leaf operators. This representation enables expert-guided reordering and fusion transformations that can improve performance or reduce memory pressure. We implement our approach in a domain-specific language called Indigo. We assess Indigo on image reconstruction problems arising in four application areas: magnetic resonance imaging, ptychography, magnetic particle imaging, and fluorescent microscopy. We give performance results from vendor BLAS libraries, and we introduce specializations to Sparse BLAS routines that achieve near-Roofline performance on multi-core, many-core, and GPU systems.

Driscoll, Michael↗

SU-E-T-379: Concave Approximations of Target Volume Dose Metrics for Intensity- Modulated Radiotherapy Treatment Planning

Purpose: The widely used treatment plan metric Dx (mimimum dose to the hottest x% by volume of the target volume) is simple to interpret and use, but is computationally poorly behaved (non-convex), this impedes its use in computationally efficient intensity-modulated radiotherapy (IMRT) treatment planning algorithms. We therefore searched for surrogate metrics that are concave, computationally efficient, and accurately correlated to Dx values in IMRT treatment plans. Methods: To find concave surrogates of D95—and more generally, Dx values with variable x values—we tested equations containing one or two generalized equivalent uniform dose (gEUD) functions. Fits were obtained by varying gEUD ‘a’ parameter values, as well as the linear equation coefficients. Fitting was performed using a dataset of dose-volume histograms from 498 de-identified head and neck IMRT treatment plans. Fit characteristics were tested using a crossvalidation process. Reported root-mean-square error values were averaged over the cross-validation shuffles. Results: As expected, the two-gEUD formula provided a superior fit, compared to the single-gEUD formula. The best approximation uses two gEUD terms: 16.25 x gEUD[a=0.45] – 15.30 x gEUD[a=1.75] – 0.69. The average root-mean-square error on repeated (70/30) cross validation was 0.94 Gy. In addition, a formula was found that reasonably approximates Dx for x between 80% and 96%. Conclusion: A simple concave function using two gEUD terms was found that correlates well with PTV D95s for these head and neck treatment plans. More generally, a formula was found that represents well the Dx for x values from 80% to 96%, thus providing a computationally efficient formula for use in treatment planning optimization. The formula may need to be adjusted for other institutions with different treatment planning protocols. We conclude that the strategy of replacing Dx values with gEUD-based formulas is promising.

60 APPLIED LIFE SCIENCES↗