Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “gain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Hygrothermal aging and recycling effects on mechanical and thermal properties of recyclable thermoplastic glass fiber composites

Abstract Glass fiber‐reinforced polymer composites are widely used in marine applications, including renewable energy devices and submarines, due to their strength‐to‐weight ratios and corrosion resistance. As sustainability becomes more important, recyclable thermoplastic composites are gaining attention in marine energy applications. These materials face harsh conditions such as high chloride water, UV radiation, pressurization, and thermal cycling, which can affect their durability and recyclability. This study examines the impact of hygrothermal aging on the recyclability of an Elium glass fiber (GF) composite. Samples were mechanically ground for recycling, and mechanical and thermal properties were compared between aged and unaged samples. After seawater aging, the tensile strength and modulus of the unaged composite dropped by 25% and 13% respectively, due to water ingress along the fiber‐matrix interface. The recycled composite showed reduced flexural strength as the long fiber composite was converted into short fibers during the process. Differential scanning calorimetry (DSC) revealed no change in glass transition temperature after aging. Weight loss (25%) was attributed to the thermal stability of the glass fibers. Dynamic mechanical analysis (DMA) showed that the storage modulus increased with aging, and fracture analysis confirmed a mixed mode of failure for aged composites. Highlights Hygrothermal aging lowers mechanical performance of Elium® GF composites. Failure mechanism tends to be matrix cracking and interface bonding. Glass transition temperature is not reduced by hygrothermal aging. Fractured composite was successfully recycled via thermoforming. Flexural strength of the recycled composite is lower.

17 WIND ENERGY↗
DOE OSTI2022

PET-RAFT polymerization under flow chemistry and surface-initiated reactions

Recently, photoinduced electron/energy transfer reversible addition–fragmentation chain transfer (PET-RAFT) polymerization has been developed and gaining wide acceptance. PET-RAFT polymerization uses visible light to initiate the reaction and is compatible with ambient conditions and green solvents. It also maintains the ability to produce well-defined polymers and possesses high potential as an alternative to the conventional RAFT technique. Here, this review aims to summarize the fundamentals of PET-RAFT polymerization, highlight two of the most commonly studied applications of PET-RAFT process (i.e. flow chemistry and surface-initiated polymerization), and explore perspectives and new possibilities of the technique.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Artificial ground reflector size and position effects on energy yield and economics of single‐axis‐tracked bifacial photovoltaics

Abstract Artificial ground reflectors improve bifacial energy yield by increasing both front and rear‐incident irradiance. Studies have demonstrated an increase in energy yield due to the addition of artificial reflectors; however, they have not addressed the effect of varying reflector dimensions and placement on system performance and the impact of these parameters on the reflectors' financial viability. We studied the effect of high albedo (70% reflective) artificial reflectors on single‐axis‐tracked bifacial photovoltaic systems through ray‐trace modeling and field measurements. In the field, we tested a range of reflector configurations by varying reflector size and placement and demonstrated that reflectors increased daily energy yield up to 6.2% relative to natural albedo for PERC modules. To confirm the accuracy of our model, we compared modeled and measured power and found a root mean square error (RMSE) of 5.4% on an hourly basis. We modeled a typical meteorological year in Golden, Colorado, to demonstrate the effects of artificial reflectors under a wide range of operating conditions. Seventy percent reflective material can increase total incident irradiance by 1.9%–8.6% and total energy yield by 0.9%–4.5% annually after clipping is considered with a DC–AC ratio of 1.2. Clipping has a significant effect on reflector impact and must be included when assessing reflector viability because it reduces reflector energy gain. We calculated a maximum viable cost for these improvements of up to $2.50–4.60/m 2 , including both material and installation, in Golden. We expanded our analysis to cover a latitude range of 32–48°N and demonstrated that higher‐latitude installations with lower energy yield and higher diffuse irradiance content can support higher reflector costs. In both modeling and field tests, and for all locations, the ideal placement of the reflectors was found to be directly underneath the module due to the optimized rear irradiance increase.

14 SOLAR ENERGY↗
DOE OSTI2025

What Is a Polyolefin? A Critical Overview of Ethylene Copolymers Used as Solar Photovoltaic Module Encapsulants

In recent years, photovoltaic (PV) encapsulant films marketed as polyolefins (POs), more specifically as PO elastomers (POEs) and thermoplastic POs (TPOs), have gained significant market share and are projected to become the dominant encapsulation films by 2030. Relative to other industries, there are significant misconceptions about the term PO in the PV industry. Both in the scientific literature as well as in sales and advertising, the terms PO, POE, and TPO are often misused to describe the same type of material with comparable properties, while in reality these may each consist of separate material classes. This paper provides a comprehensive literature and market review, to showcase a broad range of PO and other ethylene copolymer encapsulants from recent studies, and discusses the materials' properties to clarify what constitutes a “polyolefin.” In addition, to promote a clearer comparison of encapsulant properties, we propose a two‐dimensional taxonomy to categorize polymers used in module manufacturing, including POs. In terms of improving the reliability of solar PV modules, PO‐based encapsulants have several advantages (including lower water uptake and ion diffusion), but might come with disadvantages too, such as a more complex processing and a higher sensitivity to the storage conditions and shelf life. All this might prospectively impact adhesion properties of the encapsulant to other materials' interfaces (glass, cells etc.) and end‐product quality. Because the track record of field‐deployed PV modules containing PO encapsulants is also limited, we hope to contribute to better material understanding and precision in communication in PV to secure quality.

14 SOLAR ENERGY↗
DOE OSTI2024

A phosphorylation-deficient ribosomal protein eS6 is largely functional in Arabidopsis thaliana , rescuing mutant defects from global translation and gene expression to photosynthesis and growth

The eukaryote-specific ribosomal protein of the small subunit eS6 is phosphorylated through the target of rapamycin (TOR) kinase pathway. Although this phosphorylation event responds dynamically to environmental conditions and has been studied for over 50 years, its biochemical and physiological significance remains controversial and poorly understood. Here, we report data from Arabidopsis thaliana, which indicate that plants expressing only a phospho-deficient isoform of eS6 grow essentially normally under laboratory conditions. The eS6z (RPS6A) paralog of eS6 functionally rescued a double mutant in both rps6a and rps6b genes when expressed at approximately twice the wild-type dosage. A mutant isoform of eS6z lacking the major six phosphorylatable serine and threonine residues in its carboxyl-terminal tail also rescued the lethality, rosette growth, and polyribosome loading of the double mutant. This isoform also complemented many mutant phenotypes of rps6 that were newly characterized here, including photosynthetic efficiency, and most of the gene expression defects that were measured by transcriptomics and proteomics. However, compared with plants rescued with a phospho-enabled version of eS6z, the phospho-deficient seedlings retained a mild pointed-leaf phenotype, root growth was reduced, and certain cell cycle-related mRNAs and ribosome biogenesis proteins were misexpressed. The residual defects of the phospho-deficient seedlings could be understood as an incomplete rescue of the rps6 mutant defects. There was little or no evidence for gain-of-function defects. As previously published, the phospho-deficient eS6z also rescued the rps6a and rps6b single mutants; however, phosphorylation of the eS6y (RPS6B) paralog remained lower than predicted, further underscoring that plants can tolerate phospho-deficiency of eS6 well. Our data also yield new insights into how plants cope with mutations in essential, duplicated ribosomal protein isoforms.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Supramolecular polymers: Dynamic assemblies of “dancing” monomers

The objective of this perspective on supramolecular polymers is to highlight how their dynamic nature based on noncovalent bonding among monomers can have a profound impact on their functions. We focus here on peptide amphiphile supramolecular polymers developed in our laboratory and use recent results on their dynamic behavior to reflect on the exciting functions that might emerge in these systems. We are greatly motivated by recent results that demonstrate unprecedented bioactivity in supramolecular polymers to address the enormous scientific challenge of finding strategies to reverse paralysis caused by traumatic injuries or disease. We suggest that future opportunities exist for novel functions in supramolecular polymers by tuning dynamic behavior through the chemical design of monomers, and also by gaining an understanding of the precise spatiotemporal mechanisms linked to supramolecular motion in these emerging polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Spatial analysis of cell patterning to aid genetic and phenotypic understanding of grass stomatal density: A case study in maize

Biological processes involve complex hierarchies where composite traits result from multiple component traits. However, holistically understanding of how sets of component traits interact to underpin genotype-to-phenotype relationships is generally lacking. Stomatal density (SD) is a tractable model system for exploring how high-throughput phenotyping (HTP) data could be exploited by a new spatial analysis approach to better understand a developmentally and functionally important trait. SD is a composite trait, resulting from various components related to cell identity and size, which are themselves governed by a series of spatio-developmental processes. Data from 192 recombinant inbred lines of maize [Zea mays (L.)] were analyzed by a new stomatal patterning phenotype (SPP) to (1) describe the average spatial probability distribution of the nearest neighboring stomata; (2) derive a core set of component traits related to cell size, cell packing, and positional probabilities; (3) build a structural equation model of component traits underlying SD; and (4) identify stomatal patterning quantitative trait loci (QTL). The core set of SPP-derived traits explained 74% of the variation in SD. Analyzing SPP component traits allowed some loci previously identified as generic SD QTL to be recognized as specific to lateral versus longitudinal elements of stomatal patterning. Therefore, this study highlights how novel insights can be gained by decomposing a composite trait (e.g., SD) into a set of component traits that were present in HTP data but not previously exploited.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Identification of Blue Discoloration in PBX 9404 using Ultrahigh Pressure Liquid Chromatography with Quadrupole Time-of-Flight Mass Spectrometry

PBX 9404, composed of 94 wt% HMX (1,3,5,7-Tetranitro-1,3,5,7-tetrazoctane), 3 wt% NC (nitrocellulose), 2.9 wt% CEF (tris(beta-chloroethyl) phosphate) and 0.1 wt% DPA (diphenylamine), has often been observed with a slight to entire blue discoloration of the manufactured prills. This blue discoloration has been observed since the formulation development of PBX 9404 in the late 1950s. In order to determine the source of the blue discoloration in PBX 9404, ultraviolet/visible (UV/Vis) absorbance of PBX 9404 and two potential candidates for the discoloration, p-nitrosodiphenylamine (p-NDPA) and N-nitrosodiphenylamine (N-NDPA) were evaluated. An absorbance band at 590 nm in PBX 9404 sample was attributed to the blue discoloration while p-NDPA and N-NPDA had different absorbance bands. Using the knowledge gained from the UV/Vis analysis, a semi-targeted approach using ultrahigh pressure liquid chromatography coupled to UV/Vis detector and quadrupole time of flight mass spectrometry (UHPLC-UV/Vis-QTOF) was implemented. Investigating the UHPLC-UV/Vis-QTOF chromatograms at a wavelength of 590 nm, a single compound was tentatively identified as being the source of the blue discoloration. Targeted tandem mass spectrometry (MS/MS) on the compound and subsequent analysis indicated that 4,4 -{[4-(Phenylimino)-2,5-cyclohexadien-1-ylidene]methylene}bis(N-phenylaniline), also known as Spirit Blue Base, was the source of the blue discoloration, which was confirmed using a standard. Here, a theory on the formation of Spirit Blue Base in PBX 9404 involving DPA, nitric acid (HNO 3 ) / nitrogen oxide(s) NO x , and formaldehyde is proposed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Investigation of the Impurities in Erythritol Tetranitrate (ETN) Using UHPLC-QTOF

In order to further gain a comprehensive chemical understanding of erythritol tetranitrate (ETN), the synthesis impurities of ETN were investigated using ultrahigh performance liquid chromatography with tandem high resolution mass spectrometry (UHPLC-MS/MS). A total of 12 impurities were identified relating to the synthesis of ETN. We have synthesized pure analytical standards of erythritol-1,4-dinitrate (1,4-EDiN) and erythritol-1,2,4-trinitrate (1,2,4-ETriN). Furthermore, these isomerically pure standards have allowed for confirmation of the identity of some of the discovered impurities. Additionally, partially nitrated with sulfate substituted erythritol was identified which is theorized to have formed from the incomplete displacement of the formed sulfate group on the alcohol position during nitration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Reduced‐Order Modeling of Energetic Materials Using Physics‐Aware Recurrent Convolutional Neural Networks in a Latent Space (LatentPARC)

Physics-aware deep learning (PADL) has gained popularity for use in spatiotemporal dynamics simulations, such as those in computational modeling of energetic materials (EM). We show that the challenge PADL methods face while learning complex field evolution problems can be simplified and accelerated by decoupling it into two tasks: learning complex geometric features in evolving fields and modeling dynamics over these features in a lower-dimensional feature space. We build upon our previous work on physics-aware recurrent convolutional neural networks (PARC). PARC embeds knowledge of underlying physics into its neural network architecture for more robust and accurate prediction of evolving physical fields. PARC was shown to effectively learn complex nonlinear features such as the formation of hotspots and coupled shock fronts in various initiation scenarios of EMs, as a function of microstructures, serving effectively as a microstructure-aware burn model. Here, we further accelerate PARC and reduce its computational cost by projecting the original dynamics onto a lower-dimensional invariant manifold, or “latent space.” The projected latent representation encodes the complex geometry of evolving fields (e.g., temperature and pressure) in a set of data-driven features. The reduced dimension of this latent space allows us to learn the dynamics during the initiation of EM with a lighter and more efficient model. We observe a significant decrease in training and inference time while maintaining results comparable to PARC at inference. This work takes steps towards enabling rapid prediction of EM thermomechanics at larger scales and characterization of EM structure–property–performance linkages at a full application scale.

Mathematics and Computing↗
DOE OSTI2026

Predicting compatibility between ferredoxins and the Fe protein of nitrogenase using in silico protein modeling

Biological nitrogen fixation is the process by which certain bacteria and archaea use the enzyme nitrogenase to reduce atmospheric nitrogen into bioavailable ammonium. Engineering non‐nitrogen‐fixing organisms, like plants, to use nitrogenase could reduce dependency on synthetic fertilizer and mitigate the environmental impacts of industrial fertilizer production. However, nitrogenase activity requires delivery of reducing power by small electron carrying proteins known as ferredoxins and flavodoxins, and successfully engineering nitrogenase into new systems will require a mechanistic understanding of electron delivery by these proteins. Most organisms often have multiple ferredoxins, raising the question of which ferredoxin can support nitrogenase activity. The purpose of this study is to gain insight into how we can predict which ferredoxin is compatible with the Fe protein, the component of nitrogenase that interacts with ferredoxin or flavodoxin. Our in silico protein–protein docking simulations reveal that most ferredoxins and flavodoxins involved in nitrogen fixation have the shortest distance (≤10 Å) between their redox cofactor and the [4Fe‐4S] cluster of the Fe protein. We found shorter cofactor distance contributes to faster intermolecular electron tunneling rates. Bacterial ferredoxins that play a role in nitrogen fixation also exhibit more complementary interactions with the Fe protein than bacterial and plant ferredoxins not involved in this process. Heterologous expression of a set of ferredoxins from both nitrogen‐fixing and non‐nitrogen‐fixing bacteria in the diazotroph Rhodopseudomonas palustris supports our model‐derived prediction that shorter distances between the electron‐carrying cofactors favor nitrogenase compatibility. These findings offer a framework to predict and potentially enhance ferredoxin–nitrogenase compatibility, which will help to improve our ability to engineer nitrogen fixation into non‐nitrogen‐fixing organisms like plants.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Molecular basis for higher affinity of SARS-CoV-2 spike RBD for human ACE2 receptor

Severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has caused substantially more infections, deaths, and economic disruptions than the 2002-2003 SARSCoV. The key to understanding SARS-CoV-2's higher infectivity lies partly in its host receptor recognition mechanism. Experiments show that the human angiotensin converting enzyme 2 (ACE2) protein, which serves as the primary receptor for both CoVs, binds to the receptor binding domain (RBD) of CoV-2's spike protein stronger than SARS-CoV's spike RBD. The molecular basis for this difference in binding affinity, however, remains unexplained from X-ray structures. To go beyond insights gained from X-ray structures and investigate the role of thermal fluctuations in structure, we employ all-atom molecular dynamics simulations. Microseconds-long simulations reveal that while CoV and CoV-2 spike-ACE2 interfaces have similar conformational binding modes, CoV-2 spike interacts with ACE2 via a larger combinatorics of polar contacts, and on average, makes 45% more polar contacts. Correlation analysis and thermodynamic calculations indicate that these differences in the density and dynamics of polar contacts arise from differences in spatial arrangements of interfacial residues, and dynamical coupling between interfacial and non-interfacial residues. Furthermore, these results recommend that ongoing efforts to design spike-ACE2 peptide blockers will benefit from incorporating dynamical information as well as allosteric coupling effects.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Regulatory utility of physiologically based pharmacokinetic modeling for assessing food impact in bioequivalence studies: A workshop summary report

This workshop report summarizes the presentations and panel discussion related to the use of physiologically based pharmacokinetic (PBPK) modeling approaches for food effect assessment, collected from Session 2 of Day 2 of the workshop titled “Regulatory Utility of Mechanistic Modeling to Support Alternative Bioequivalence Approaches.” The US Food and Drug Administration in collaboration with the Center for Research on Complex Generics organized this workshop where this particular session titled “Oral PBPK for Evaluating the Impact of Food on BE” presented successful cases of PBPK modeling approaches for food effect assessment. Recently, PBPK modeling has started to gain popularity among academia, industries, and regulatory agencies for its potential utility during bioavailability (BA) and/or bioequivalence (BE) studies of new and generic drug products to assess the impact of food on BA/BE. Considering the promises of PBPK modeling in generic drug development, the aim of this workshop session was to facilitate knowledge sharing among academia, industries, and regulatory agencies to understand the knowledge gap and guide the path forward. This report collects and summarizes the information presented and discussed during this session to disseminate the information into a broader audience for further advancement in this area.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Development of AlGaN‐Based Deep‐Ultraviolet Avalanche Photodetectors—Toward Their Intrinsic Characteristics

Al 0.6 Ga 0.4 N deep‐UV p–i–n avalanche photodiodes (APDs) are demonstrated grown by metalorganic chemical vapor deposition (MOCVD) on a (0001) c‐plane aluminum nitride (AlN) bulk substrate and fabricated both with and without an ion implantation process for mesa‐edge electric‐field termination. Three design considerations are taken into account: the optical absorption of the AlN bulk substrate, the photosensitivity of the APD, and the breakdown electric field. The MOCVD growth conditions of the AlGaN APD layers are optimized. Then, a detailed description of the seven device fabrication steps of the APDs is provided, which includes nitrogen ion implantation. The APDs fabricated by the ion implant process exhibit a dark‐current density under low reverse bias ≈1 × 10 −9 A cm −2 . This is one order of magnitude lower than the APD fabricated without ion implantation from the same wafer. The breakdown voltage of the APD is ≈−140 V. The calculated optical gain of the ion‐implanted APD beyond avalanche breakdown is ≈5.2 × 10 5 (current limited) and the device has an average zero‐bias photoresponse of ≈68 mA W −1 at a wavelength of 250 nm.

Jeong, Hoon [Department of Electronic Engineering ↗
DOE OSTI2024

The Nonradiative Properties of Self–Trapped Holes in Ultra–Wide Bandgap Gallium Oxide Film

The photoluminescence (PL) of self-trapped holes (STH) in ultra-wide bandgap β-Ga 2 O 3 is commonly its most dominant light emission and is an inherent property. Thus, gaining knowledge of the crystal dynamics that impact the PL properties is vital to sensor and other technologies. The PL, Raman-phonons, and their interactions are studied at an extreme temperature range of 77–622 K. The PL is studied up to the bandgap value of ≈5 eV. It is found that the high-energy Raman modes provide a major route to the nonradiative process of the PL via STH–phonon interaction with an activation energy of 72 meV. This dynamic is modeled with the configurational coordinate scheme at the strong phonon coupling limit. The exceptionally broad Gaussian PL linewidth manifests this coupling. The weak temperature response of the PL energy peak position indicates that the STH has characteristics of a deep-level defect. This contrasts with the large redshift of ≈220 meV of the optical gap of the film, ascertained from transmission. Unlike the temperature response of the high-energy phonons, the behavior of the low-energy phonons is found to follow the Bose–Einstein population increase, indicating no strong interaction with the STH.

Raman↗
DOE OSTI2025

Competing and Anisotropic Exchange Interactions in the Kagome Lattice Ferromagnet Co 3 Sn 2 S 2

The kagome lattice ferromagnet, Co 3 Sn 2 S 2 , serves as template for a host of materials that exhibit exotic topological states, as well as a giant anomalous Hall state—a momentous realization in condensed matter physics. The anisotropic exchange interactions are probed by applying external magnetic fields in various directions along major crystal axes and the magneto-optical response is recorded. When magnetic fields are applied along the a–b plane, long-range magnetism forms and grows with increasing temperature. This counterintuitive behavior does not take place when the magnetic field is applied at a slight angle off the a–b plane. In fact, the opposite effect is observed for this exact configuration, as well as for other fields arrangements. Ab initio theoretical calculations reveal that anisotropic exchange interactions are the underlying mechanism leading to this peculiar behavior. Furthermore, the long-range ferromagnetic order along the c-axis is thought to coexist with an antiferromagnetic, or spin glass, state in the a–b plane, before becoming paramagnetic above the Curie temperature (T c ). These two coexisting magnetic states are thought to compete as the temperature approaches T c , with the antiferromagnetic state gaining strength compared to the ferromagnetic order.

Barua, Arup [University of South Florida, Tampa, F↗
DOE OSTI2025

Bayesian D‐Optimal Designs for Gaussian Process Surrogate Models

Computer experiments often employ space-filling strategies to create surrogate models with strong predictive performance. The impact of model parameter estimation for Gaussian process surrogates, however, is often overlooked. Obtaining a better initial estimate of the covariance lengthscale parameter, θ, can greatly improve the resulting Gaussian process fit through more effective sequential acquisitions during active learning. In this work, we propose a novel initial design maximizing the Bayesian D-optimality criterion of the Gaussian process lengthscale parameter. Previously published results have shown the emphasis on lengthscale estimation to be promising, but relied on an empirically driven design creation process. Our Bayesian D-optimal designs are rooted in information theory and lead to more informative sequential acquisitions by improving lengthscale estimation. In many cases, these gains eventually result in better surrogates than those seeded with space-filling initial designs. Furthermore, Bayesian D-optimal designs can be tailored to either isotropic or anisotropic covariance structures, and the Bayesian framework enables the inclusion of prior knowledge in the design process, offering greater flexibility and adaptability. Through several simulation studies, we demonstrate the advantages of Bayesian D-optimal designs in terms of both lengthscale estimation accuracy and predictive performance during active learning.

Bayesian experimental design↗