Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fusion science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Deep learning for NLTE spectral opacities

Computer simulations of high energy density science experiments are computationally challenging, consisting of multiple physics calculations including radiation transport, hydrodynamics, atomic physics, nuclear reactions, laser–plasma interactions, and more. To simulate inertial confinement fusion (ICF) experiments at high fidelity, each of these physics calculations should be as detailed as possible. However, this quickly becomes too computationally expensive even for modern supercomputers, and thus many simplifying assumptions are made to reduce the required computational time. Much of the research has focused on acceleration techniques for the various packages in multiphysics codes. In this work, we explore a novel method for accelerating physics packages via machine learning. The non-local thermodynamic equilibrium (NLTE) package is one of the most expensive calculations in the simulations of indirect drive inertial confinement fusion, taking several tens of percent of the total wall clock time. We explore the use of machine learning to accelerate this package, by essentially replacing the physics calculation with a deep neural network that has been trained to emulate the physics code. Overall, we demonstrate the feasibility of this approach on a simple problem and perform a side-by-side comparison of the physics calculation and the neural network inline in an ICF Hohlraum simulation. We show that the neural network achieves a 10× speed up in NLTE computational time while achieving good agreement with the physics code for several quantities of interest.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Irradiation creep model for α-Fe: Dislocation climb in the presence of stress fields (Final Report)

Irradiation creep is known to be an important process for structural materials in nuclear environments, potentially leading to creep failure at temperatures where thermal creep is generally negligible. While there is a great deal of data for irradiation creep in steels and zirconium alloys in light water reactor conditions, much less is known for first wall materials under fusion energy conditions. Lacking suitable fusion neutron sources for detailed experimentation, modeling, and simulation can help bridge the dose-rate and spectral-effects gap and produce quantifiable expectations for creep deformation of first wall materials under standard fusion conditions. In this work, we present a comprehensive model for irradiation creep created from merging a crystal plasticity representation of the dislocation microstructure and a defect evolution simulator that accounts for the entire cluster dimensionality space. Both approaches are linked by way of a climb velocity that captures dislocation-biased defect absorption and a dislocation strengthening term that reflects the accumulation of defect clusters in the system. We carry out our study in Fe under first wall fusion reactor conditions, characterized by a fusion neutron spectrum at temperatures between 300 and 800°K.

36 MATERIALS SCIENCE↗

Keyhole-mode Microscopy Dataset for Laser Powder-bed Fusion Modeling

Laser powder-bed fusion (LPBF) is an additive manufacturing (AM) technology that uses high-power sintering lasers to precisely construct metal designs. Material is accumulated by selectively sintering regions of a metal powder layer to a growing structure underneath forming a 3D geometry. Certain conditions make fusion in this process to operate in "keyhole-mode," characterized by targeted materials evaporating as plasma. While keyhole-mode operations can produce deeper molten pools than that observed in "conduction-mode", this mode of operation is often undesirable, as its molten regions can collapse on themselves, encapsulating metal vapors and forming cavities. The formation of such cavities negatively affects strength and consistency of the fused materials. To identify and avoid these detrimental effects of keyhole-mode operation, considerable data collection and analysis regarding this mode of operation is needed. Therefore, under the support of the "Open Data Initiative," Lawrence Livermore National Lab is releasing a dataset for analysis of this keyhole effect, and the conditions which transition operation from conduction-mode to keyhole-mode melting. This dataset consists of 600+ micrographs from laser powder-bed single track runs, with differing cross-section angles and input parameters, operating under both normal and keyhole mode operations. This journal documents the collection, organization, and usage of this dataset.

36 MATERIALS SCIENCE↗

Macromolecules & Manufacturing Science

Outline • SRNL Overview • Mission overview • Polymers enabling the mission • R&D Highlights • Polymers in radiation environments • Tooling in shielded cells • Packaging for nuclear material shipments • Polymers supporting tank waste remediation • Ref electrode • Epoxy and polymer grout • Polymers for fusion energy • Deuterium labelling • Polymers for additive manufacturing • Coalescence and blends: experimental and predictive • Process modelling and sorting through big data (peregrine and latticeJ)

Chatham, Camden [Savannah River National Laborator↗

How Austenitic Is a Martensitic Steel Produced by Laser Powder Bed Fusion? A Cautionary Tale

Accurate phase fraction analysis is an essential element of the microstructural characterization of alloys and often serves as a basis to quantify effects such as heat treatment or mechanical deformation. Additive manufacturing (AM) of metals, due to the intrinsic nonequilibrium solidification and spatial variability, creates additional challenges for the proper quantification of phase fraction. Such challenges are exacerbated when the alloy itself is prone to deformation-induced phase transformation. Using commonly available in-house X-ray diffraction (XRD) and electron backscatter diffraction (EBSD) and less commonly used synchrotron-based high-energy X-ray diffraction, we characterized nitrogen-atomized 17-4 precipitation-hardening martensitic stainless steel, a class of AM alloy that has received broad attention within the AM research community. On the same build, our measurements recovered the entire range of reported values on the austenite phase fractions of as-built AM 17-4 in literature, from ≈100% martensite to ≈100% austenite. Aided by Calphad simulation, our experimental findings established that our as-built AM 17-4 is almost fully austenitic and that in-house XRD and EBSD measurements are subject to significant uncertainties created by the specimen’s surface finish. Hence, measurements made using these techniques must be understood in their correct context. Our results carry significant implications, not only to AM 17-4 but also to AM alloys that are susceptible to deformation-induced structure transformation and suggest that characterizations with less accessible but bulk sensitive techniques such as synchrotron-based high energy X-ray diffraction or neutron diffraction may be required for proper understanding of these materials.

17-4 steel↗

Detecting keyhole porosity and monitoring process signatures in additive manufacturing: an in situ pyrometry and ex situ X-ray radiography correlation

Creation of pores and defects during laser powder bed fusion (LPBF) can lead to poor mechanical properties and thus must be minimized. Post-build inspection is required to ensure the printed parts contain acceptably low defect concentrations. These inspections are time consuming and costly, especially for large or complex parts. As a potential solution, in situ process monitoring can be used to detect the creation of defects, characterize local material behavior and predict expected component properties. However, the precise relationship between pore creation and in situ process monitoring still needs to be understood. In this work, high-speed infrared diode-based pyrometry and high-speed optical imaging signals were used to monitor LPBF printing of 446 stainless steel 316 L single tracks with varying laser power and velocity. Results indicate an increase in pyrometer signal and melt pool dimensions with increasing laser power and decreasing velocity in agreement with previous work. In addition, careful analysis of pyrometer signal reveals a distinct signature of the conduction-to-keyhole mode transition which was confirmed by metallography. Critically, pore defect initiation as characterized by ex situ X-ray radiography was correlated with in situ thermal monitoring signals to derive the probability of defect creation. Our results show that, in principle, a probabilistic prediction of pore formation can be achieved based on in situ high-speed pyrometry monitoring of the LPBF melt pool.

36 MATERIALS SCIENCE↗

Determining processing behaviour of pure Cu in laser powder bed fusion using direct micro-calorimetry

We report copper is challenging to process by laser powder bed fusion (LPBF) given its high reflectivity at common infrared laser diode wavelengths and high thermal conductivity. Successful deposition of copper in a predictable and repeatable fashion relies on understanding the development of the keyhole melting regime, as well as heating, melting, boiling and vapour formation behaviour when interacting with a laser beam within an LPBF environment. In this study, in situ optical absorptivity measurements are used to clarify the complex physics of the laser material interaction. Absorptivity of laser energy is measured using direct micro-calorimetry and compared to melt pool depth in correlation to processing parameters. The measured absorptivity for a 100 μm layer thickness of powder was found to be approximately four times higher than that of the bare polished discs. It was also shown that high laser power above 500 W and scan speed up to 150 mm/s are appropriate for effective melting of the powder layer, with these parameters overcoming the threshold required to achieve keyhole melting. This is explained by multiple reflections withing the powder particles and the lower thermal conductivity of packed powder in comparison to bare discs. Melt pool formation was found to be highly unstable and an explosive behavior was observed when in the keyhole regime, caused by high fluctuations in absorptivity values. This work demonstrates calorimetry can be used to monitor melting behaviour in a real-time fashion during processing for this challenging to process material, thereby avoiding unnecessary parametric optimisation. In addition, the parametric window for optimum processing revealed here can inform future work.

36 MATERIALS SCIENCE↗

The corrosion effects of neutron activation of 2LiF-BeF 2 (FLiBe)

The redox effect of activation reactions in molten salts has been previously qualitatively defined but never quantified. Here, we quantify the corrosion effects of neutron activation of FLiBe. Rates of change of activation products are computed for FHR and ARC. The impact of activation reactions on salt chemistry is quantitatively compared to other environmental effects of similar consequences on the salt. The results are applied to a redox control case-study and an irradiation-corrosion experiment. The results are presented in a manner useful to the reactor chemist and designer concerned with corrosion and chemistry control and tritium management in irradiated FLiBe, and design of salt-irradiation experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Glow Discharge Boronization and Real-Time Boronization Using an Impurity Powder Dropper in LHD

In the Large Helical Device (LHD), boronization is utilized for wall conditioning, employing two distinct methods: glow discharge using diborane gas and the injection of boron powder into the plasma via an impurity powder dropper (IPD). Glow discharge boronization is conducted after maintenance when the vacuum vessel is exposed to air and just before the start of an experimental campaign. In contrast, real-time boronization using the IPD is performed during discharges. The distribution of boron on plasma-facing components was assessed through long-term material probes in the case of glow discharge and through numerical simulations for the IPD method. Results indicated non-uniform boron distributions in both cases. The impact of these boronization techniques on impurity levels and the lifetime of their effects were also examined. Both methods effectively reduced oxygen and iron in the plasma, with the iron impurities originating from the first wall. For glow discharge boronization, the reduction in oxygen levels persisted until the end of the experimental campaign, whereas the reduction in iron levels only lasted a few days. In the case of boron injection during long pulse discharges exceeding 200 s, the suppression of oxygen and iron was observed. The effect on iron quickly diminished within several seconds after the injection ended, whereas the effect on oxygen lasted more than 100 s. The difference in the lifetimes of the boronization effects is further discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Performance characterization of x-ray crystal spectroscopy highly oriented pyrolytic graphite reflectors based on x-ray diffractometry experiments

The use of Highly Oriented Pyrolytic Graphite (HOPG) reflectors is often proposed in the design of X-ray Crystal Spectroscopy (XCS) diagnostic systems for the next-generation tokamak devices, including the ITER project. Here, this study introduces an experimental study based on the X-Ray Diffractometry (XRD) method to evaluate the performance of HOPG reflectors. The experimental method provides both the angular responses and the reflectivities of the HOPG reflectors. A demonstrative XRD experiment is conducted, and the details of the experiment are introduced. This method enables precise studies on HOPG reflectors, facilitating the design of XCS diagnostic systems for future tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Edge-localized mode mitigation enabled by active control of pedestal density gradient with new EAST tokamak divertor

Mitigation of large edge-localized modes (ELMs) has been achieved by actively reducing the pedestal density gradient with the EAST new right-angled lower divertor through changing the strike point position from the vertical target to the horizontal target. A series of dedicated experiments in the 2021–2024 EAST campaigns demonstrate that this ELM control solution is highly reproducible in a broad parameter space of edge safety factor q 95 = 4.7–7.1, heating power P total = 2.3–5 MW, and pedestal collisionality $ν_{e,ped}^{*}$ = 1–6, under both favorable and unfavorable magnetic configurations. Higher plasma density could facilitate the achievement of this ELM control solution. Statistical results indicate that the ELM mitigation effect can be observed at relatively larger Greenwald density fraction of f GW > 0.47. In addition, this ELM mitigation effect can be achieved with both lithium-coated and boronized metal walls. The pedestal density gradient is systematically lower in the horizontal target case than that of the vertical target case when the ELM mitigation effect can be observed. SOLPS-ITER simulation results indicate that the pedestal fueling from divertor recycling is significantly lower in the horizontal target case. This could contribute to the formation of a flattened pedestal density profile with small ELMs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a data-driven neural network model for electron thermal transport in NSTX

A data-driven electron thermal transport neural network (ETT-NN) model, trained on TRANSP interpretative analysis results of National Spherical Torus Experiment (NSTX), was developed to enable faster and more accurate ETT computation for spherical tokamaks (STs). The model incorporates both convolutional NNs and recurrent NNs, allowing it to simultaneously account for the spatial and temporal non-localities and multi-scale features of turbulent transport, which have been considered only in a limited manner in conventional models. The model was validated through interpretative analysis and predictive simulations using Tokamak Reactor Integrated Automated Suite for Simulation and Computation, demonstrating relatively high accuracy. Additionally, parameter scans were performed on test discharges known to exhibit specific turbulent modes, such as microtearing mode, trapped electron mode, kinetic ballooning mode, and electron temperature gradient mode. The scanning results revealed that the ETT-NN model exhibits the same trends as those observed in conventional gyrokinetic simulations or theories, while also capturing the global nature of turbulent transport, indicating that the data-driven model accurately reflects the underlying physical characteristics. Furthermore, due to the dimensionless nature of the model, we can feasibly expand its applicability by incorporating data from other devices and uncovering the characteristics of ETT in STs in the future.

NSTX↗

Simulating plasma wave propagation on a superconducting quantum chip

Quantum computers may one day enable the efficient simulation of strongly coupled plasmas that lie beyond the reach of classical computation in regimes where quantum effects are important and the scale separation is large. Here, in this article, we take a first step toward efficient simulation of quantum plasmas by demonstrating linear plasma wave propagation on a superconducting quantum chip. Using high-fidelity and highly expressive device-native gates, combined with an error-mitigation technique, we simulate the scattering of laser pulses from inhomogeneous plasmas. Our approach is made feasible by the identification of a suitable local spin model whose excitations mimic plasma waves, and whose circuit implementation requires a lower gate count than other proposed approaches that would require a future fault-tolerant quantum computer. This work opens avenues to study more complicated phenomena that cannot be simulated efficiently on classical computers, such as nonlinear quantum dynamics when strongly coupled plasmas are driven out of equilibrium.

general physics↗

Ice Dusty Plasma (Final Report)

The NSF/DOE funding described in this final report was for constructing a substantial upgrade that would enable operation at variable and much lower cryogenic temperatures than was available in a previous experiment that operated from 2013 to 2019. Components for the upgraded experiment were designed and ordered from August to December 2019 and assembly began in early 2020. However, COVID-19 halted all lab work for much of 2020 and then when lab work resumed, numerous restrictions on lab access and in-lab time further impeded progress. Because of these delays, first plasma was obtained in late 2021 and a normal work pace resumed only in mid-2022. A no-cost extension was requested because the COVID-19 delays prevented work from being done at the anticipated rate. Constructing a water-ice experiment was a significant gamble because the parameter regime differs substantially from conventional laboratory plasmas and injecting water vapor into a plasma goes very much against convention as one normally goes to great lengths to avoid water vapor. This experiment opens a new frontier, namely the study of how charged ice grains form, grow, and interact with a plasma environment. The just-completed upgrade was a further gamble because it combines technology never previously used together (cryocoolers, plasma, and ice).

36 MATERIALS SCIENCE↗

Investigating Fast Scanning Calorimetry and Differential Scanning Calorimetry as Screening Tools for Thermoset Polymer Material Compatibility with Laser-Based Powder Bed Fusion

As additive manufacturing (AM) technology has developed and progressed, a constant topic of research in the area is expanding the library of materials to be used with these techniques. Among AM methods that utilize polymers, laser-based powder bed fusion (PBF-LB) has preferentially used thermoplastic polymers as its starting materials, but the deposition and material joining method employed in PBF-LB may also be compatible with powdered thermoset polymer precursors as feedstocks. To assess the compatibility of candidate thermosetting polymers and PBF-LB, characterization techniques and protocols that link fundamental material behavior to material behavior in the processing environment are needed. Therefore, the objectives of this work are to compare the curing behavior measured with two different calorimetry techniques that can operate in different heating rate regimes, differential scanning calorimetry (DSC) and fast scanning calorimetry (FSC), and to assess the capabilities of these techniques to act as materials screening tools for PBF-LB. A commercial polyester powder coating is used as a model material to evaluate the potential of obtaining complimentary information for material screening through a combination of calorimetry methods, and its non-isothermal curing behavior is measured at heating rates between 5 °C/min and 7500 °C/min. Curing exotherms are observed with both calorimetry techniques, and comparing the enthalpy associated with curing shows that incomplete curing occurs at higher heating rates, with relative conversion values of approximately 30%. The curing data are fit with two isoconversional models, Friedman and Starink, which show a reduced activation energy at higher heating rates as well, signifying a lower barrier to curing at the conditions used in the FSC experiments. Overall, the results of this work indicate that using these two calorimetry techniques as tiered screening tools can provide valuable information about how curing may proceed in PBF-LB and inform materials selection and design activities for additive manufacturing.

36 MATERIALS SCIENCE↗

Additive manufacturing process parameter determination for a new Fe-C-Cu alloy

As a potential replacement for stainless steel alloys commonly used to print parts with laser powder bed fusion, a new Cu precipitation strengthened ferrous alloy, with composition Fe-0.2C-6Cu (wt%), was recently developed. This material is Co- and Ni-free, printable, has mechanical properties comparable to that of high strength stainless steels (approximately 1300 MPa UTS), and is cost-advantaged relative to existing low-alloy steels for additive manufacturing of parts with complex shapes. To gain traction for broader application, optimal laser powder bed fusion (LPBF) processing conditions to produce nearly defect-free parts without compromising mechanical strength are needed. Here, an optimal processing window based upon laser speeds that achieve minimal porosity was quantified via comparisons of measured melt pool penetration, scan speeds, printed material density and laser beam energy density on a commercial LPBF unit operating at 350 W, 80 μm hatch spacing, and 50 μm layer thickness based upon optimal parameters for 17-4PH. Furthermore, the window is 300 to 500 mm/s to achieve >99.8 % dense Fe-0.2C-6Cu (wt%) specimens. Other defects such as burning, spatter, and lack of fusion were also avoided in this window. The window was validated with in-situ synchrotron X-ray imaging that enabled visualization of the vapor cavity, melting, and solidification during a single laser track scan on a miniature powder bed sample. In addition, in-situ infrared imaging provided temperature fields, cooling rate and solidification range, and confirmed minimal printing defects and spatter within the processing window.

36 MATERIALS SCIENCE↗