SEARCH · Engineering Papers

Results for “fundamental parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

All sources NASA NTRS DOE OSTI

NASA NTRS1976

A survey of leeside flow and heat transfer on delta planform configurations

The dominant feature of hypersonic leeside flow fields is the presence of coiled vortices which are generated as the leeside boundary layer responds to the inviscid flow field. Depending on geometric and stream parameters, the vortices can be completely maintained within the boundary layer or can lie outside which is the more familiar case of rolled-up vortices associated with separated flow. Three main areas are covered: (1) fundamental leeside flow phenomena associated with inviscid flows, separation and vortex phenomena involving viscid-inviscid interactions on sharp-edged delta wings and cones; (2) the application of these fundamental concepts to delta-wing bodies such as the space shuttle; and (3) the opportunity and a proposed approach to use early shuttle orbiter entry flights to obtain leeside data.

Dunavant, J. C.↗

NASA NTRS1980

Oxygen production for interplanetary return missions

Interplanetary missions with extraterrestrial returns are limited by large propulsion mass requirements. The injected mass landed on an extraterrestrial body can be reduced substantially by utilizing indigenous materials for the production of propellant on the extraterrestrial body. Analyses reported show that for Mars return missions, in situ production of oxygen during the wait between landing and the next low-energy return opportunity reduces the Earth-launch mass requirements to the allowable limit for direct entry and direct return missions. A small chemical processor using radioisotope thermal energy can extract oxygen several times its own mass from carbon dioxide, during the several-hundred-days wait on Mars. The fundamental element of the concept is the electrolytic process. Solid electrolyte cells for extracting oxygen from gaseous feedstock are identified. The basic physical principles underlying the extraction process are analyzed, and the relations between the major parameters established. The laboratory equipment for experimental investigation of the process is presented.

Richter, R.↗

NASA NTRS1980

Rectenna array measurement results

The measured performance characteristics of a rectenna array are reviewed and compared to the performance of a single element. It is shown that the performance may be extrapolated from the individual element to that of the collection of elements. Techniques for current and voltage combining were demonstrated. The array performance as a function of various operating parameters is characterized and techniques for overvoltage protection and automatic fault clearing in the array demonstrated. A method for detecting failed elements also exists. Instrumentation for deriving performance effectiveness is described. Measured harmonic radiation patterns and fundamental frequency scattered patterns for a low level illumination rectenna array are presented.

Dickinson, R. M.↗

NASA NTRS1985

Nonlinear Dynamic Analysis of Deploying Flexible Space Booms

A fundamental investigation of the planar deployment and lock-up of two flexible boom type appendages which have attached tip masses and are connected to a central rigid body through a rotational spring is presented. Nondimensional parameters are identified and it is shown that, in general, the solution depends only on two mass ratios and one nondimensional stiffness parameter. Results are presented for boom tip deflections, deployment time and root moments at lock-up. A threshold value of the nondimensional stiffness parameter is identified beyond which boom deflections become large. Also, a thorough examination of the effect of nonlinear terms in the equations governing the deployment phase is performed. Nonlinear terms in the deployment equations due to kinematics and structural deformation are required to predict more accurately boom deflections, but retention of an inconsistent set of nonlinear terms leads to erroneous results. In particular, retaining nonlinear kinematic terms while neglecting nonlinear structural terms can produce inaccurate results even below the threshold stiffness value.

Mcgowan, P. E.↗

NASA NTRS1988

Remote sensing of atmospheric oxygen from a sounding rocket

This paper describes a rocket experiment to investigate mechanisms governing the interactions between two of the fundamental components of the solar-terrestrial system: the solar ionizing radiation and the earth's upper atmosphere. The aim is to characterize the extreme ultraviolet (EUV) emissions resulting from these interactions in terms of physical parameters so that EUV remote sensing can be gainfully employed as a quantitative diagnostic of the terrestrial atmosphere and plasma environment. The payload consists of a high-resolution (about 0.5 A) spectrometer to measure the EUV emissions (980-1360 A) of the earth's dayglow, a moderate resolution (about 15 A) EUV spectrometer (250-1450 A) to measure the solar irradiation responsible for the photoelectron production, and a hydrogen Lyman Alpha photometer to monitor the solar irradiance and geocoronal emissions.

Chakrabarti, S.↗

NASA NTRS1989

Unstable vortices in the near region of an internal flow cavity

This paper presents experimental data taken in the forward region of a separated internal free-shear layer produced in an internal cavity flowfield. It has been found that in the region very near the forward restrictor, experimental velocity profiles agree closely with the exact Stuart instability velocity profile with various values of a steepness parameter. Reynolds shear-stress profiles suggest the presence of counter-rotating longitudinal vortices. Spectral analysis by the maximum entropy method of the time samples within the vortices indicates subharmonic and harmonic components of the fundamental frequency, with a weak indication of the fundamental frequency itself.

Isaacson, L. K.↗

NASA NTRS1991

Investigations of turbulent scalar fields using probability density function approach

Scalar fields undergoing random advection have attracted much attention from researchers in both the theoretical and practical sectors. Research interest spans from the study of the small scale structures of turbulent scalar fields to the modeling and simulations of turbulent reacting flows. The probability density function (PDF) method is an effective tool in the study of turbulent scalar fields, especially for those which involve chemical reactions. It has been argued that a one-point, joint PDF approach is the one to choose from among many simulation and closure methods for turbulent combustion and chemically reacting flows based on its practical feasibility in the foreseeable future for multiple reactants. Instead of the multi-point PDF, the joint PDF of a scalar and its gradient which represents the roles of both scalar and scalar diffusion is introduced. A proper closure model for the molecular diffusion term in the PDF equation is investigated. Another direction in this research is to study the mapping closure method that has been recently proposed to deal with the PDF's in turbulent fields. This method seems to have captured the physics correctly when applied to diffusion problems. However, if the turbulent stretching is included, the amplitude mapping has to be supplemented by either adjusting the parameters representing turbulent stretching at each time step or by introducing the coordinate mapping. This technique is still under development and seems to be quite promising. The final objective of this project is to understand some fundamental properties of the turbulent scalar fields and to develop practical numerical schemes that are capable of handling turbulent reacting flows.

Gao, Feng↗

NASA NTRS2009

Searching for New Physics with Ultrahigh Energy Cosmic Rays

Ultrahigh energy cosmic rays that produce giant extensive showers of charged particles and photons when they interact in the Earth's atmosphere provide a unique tool to search for new physics. Of particular interest is the possibility of detecting a very small violation of Lorentz invariance such as may be related to the structure of space-time near the Planck scale of approximately 10 (exp -35) m. We discuss here the possible signature of Lorentz invariance violation on the spectrum of ultrahigh energy cosmic rays as compared with present observations of giant air showers. We also discuss the possibilities of using more sensitive detection techniques to improve searches for Lorentz invariance violation in the future. Using the latest data from the Pierre Auger Observatory, we derive a best fit to the LIV parameter of 3 .0 + 1.5 - 3:0 x 10 (exp -23) ,corresponding to an upper limit of 4.5 x 10-23 at a proton Lorentz factor of approximately 2 x 10(exp 11) . This result has fundamental implications for quantum gravity models.

Stecker, Floyd W.↗

NASA NTRS1999

A Novel Acousto-Electric Levitator for Studies of Drop and Particle Clusters and Arrays

A novel and compact instrumentation for studying the behavior of drop sprays and of clusters of drops now permits fundamental research into the behavior of reacting and non-reacting fluid and solid species. The new capability is made possible by simultaneous acousto-electric levitation and charging of "seed" droplets (10-30 microns in diameter) which come together in 2-D clusters (with up to 300 droplets). These clusters are interesting in their own right because of their crystalline and quasi-crystalline forms, which depend on the acoustic and electric field parameters. By varying the electric and acoustic field intensities, one can cause a cluster of droplets to condense into larger drops (e.g. 50-300 microns) which, because of their charge, form uniformly spaced 2-D arrays of monodispersed drops (e.g. 30-40 array drops in preliminary experiments). One or more layers of these 2-D arrays can form in the acoustic standing wave. Such a configuration permits a wide range of fundamental studies of drop evaporation, combustion, and nucleation. The drops can be single or multicomponent. Therefore, fundamental materials studies can also be performed. Using this same Cluster and Array Generation (CAG) instrumentation, it has been also possible in preliminary experiments to demonstrate the clustering and arraying of solid particles, both coated with an electrically conducting layer and uncoated, and both charged and uncharged.

Tian, Yuren↗

NASA NTRS2006

Calibration Issues and Operating System Requirements for Electron-Probe Microanalysis

Instrument purchase requirements and dialogue with manufacturers have established hardware parameters for alignment, stability, and reproducibility, which have helped improve the precision and accuracy of electron microprobe analysis (EPMA). The development of correction algorithms and the accurate solution to quantitative analysis problems requires the minimization of systematic errors and relies on internally consistent data sets. Improved hardware and computer systems have resulted in better automation of vacuum systems, stage and wavelength-dispersive spectrometer (WDS) mechanisms, and x-ray detector systems which have improved instrument stability and precision. Improved software now allows extended automated runs involving diverse setups and better integrates digital imaging and quantitative analysis. However, instrumental performance is not regularly maintained, as WDS are aligned and calibrated during installation but few laboratories appear to check and maintain this calibration. In particular, detector deadtime (DT) data is typically assumed rather than measured, due primarily to the difficulty and inconvenience of the measurement process. This is a source of fundamental systematic error in many microprobe laboratories and is unknown to the analyst, as the magnitude of DT correction is not listed in output by microprobe operating systems. The analyst must remain vigilant to deviations in instrumental alignment and calibration, and microprobe system software must conveniently verify the necessary parameters. Microanalysis of mission critical materials requires an ongoing demonstration of instrumental calibration. Possible approaches to improvements in instrument calibration, quality control, and accuracy will be discussed. Development of a set of core requirements based on discussions with users, researchers, and manufacturers can yield documents that improve and unify the methods by which instruments can be calibrated. These results can be used to continue improvements of EPMA.

Carpenter, P.↗

DOE OSTI2022

Equivalent Fundamental-Mode Source Simulations for Spherical Uranium and Plutonium Systems [Abstract]

The equivalent fundamental-mode source refers to a “source” which is identically distributed in space, energy, and angle as that of a fundamental-mode fission source distribution. It has previously been shown that the system fixed source multiplication ($M_{fs}$) relates to the effective multiplication factor ($\kappa_{eff}$) as $M_{fs} = \frac{g^*}{1-k_{eff}}$ The term $\mathcal{g}$* therefore relates the system source distribution to the system equivalent fundamental-mode source. As previously shown, the $\mathcal{g}$* term is approximately 1 for deeply subcritical systems and then diverges as the system multiplication increases. For a system with a point source located in the center of an assembly (such a sphere), $\mathcal{g}$* will be greater than 1; this happens because there is a higher probability of induced fission when all of the starter neutrons originate from the center of the sphere. For a uniform source, $\mathcal{g}$* is less than 1, but does not diverge from 1 as dramatically as seen by a point source. One reason that $\mathcal{g}$* is an important parameter is that it is used in measurement methods to infer reactor kinetics parameters ($β_{eff}$ being one example). This work will discuss multiple ways to simulate $\mathcal{g}$* using MCNP®6.2, which include use of traditional methods versus a single input file method that was recently published. A discussion related to methods to simulate $M_{fs}$ will be presented. Spherical systems of Highly Enriched Uranium (HEU) will be compared with previous works. In addition, results of plutonium including multiple reflector materials will be investigated. Simulated systems will include both parametric studies as well as configurations used in recent experiments performed at the National Criticality Experiments Research Center (NCERC). These studies will include subtleties associated with system geometry that have not been previously shown. Last, this work will investigate the relationship between $\mathcal{g}$* and reactor kinetics parameters (such as $β_{eff}$).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2022

Light Dark Matter Detection with Hydrogen-Rich Targets and Low-$T_c$ TES Detectors

Direct detection of nuclear scatterings of sub-GeV dark matter (DM) particles favors low-Z nuclei. Hydrogen nucleus, which has a single proton, provides the best kinematic match. The characteristic nuclear recoil energy is boosted by a factor of a few tens from those for larger nuclei used in traditional Weakly Interacting Massive Particles searches. Furthermore, hydrogen is optimal for detecting spin-dependent nuclear scatterings of sub-GeV DM, where large parameter space still remains unconstrained yet. In this paper, we first introduce several hydrogen-rich targets, which emit two classes of signals under kinetic excitations. One class of the signals is infrared photons, which are from fundamental vibrational and rotational modes of molecules and at several characteristic wavelengths. Another is acoustic phonons and optical phonons that decay into acoustic phonons. Then we discuss the technical status and future researches of low-T c transition-edge sensor (TES) detectors, which measure the infrared photons and acoustic phonons with desirable sensitivities. Utilization of hydrogen-rich targets and ultra-sensitive low-T c TES detectors for light DM detection requires both theoretical modeling and experimental prototyping.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Failure analysis and design principles of silicon-based lithium-ion batteries using micron-sized porous silicon/carbon composite

Significant progresses have been made to overcome the fundamental challenges in silicon (Si)-based lithium-ion batteries (LIBs). However, much less work have been reported on the design and failure analysis these batteries for practical applications. In this work, we analyzed various cell design parameters affecting the performance of pouch cells using micron-sized porous Si with nano-pore structure and coated by pitch-carbon (p-Si/C). The correlation among particle level, electrode level, and cell level properties, especially the effect of electrode density on the volumetric capacity density of Si anode and full batteries have been systematically investigated. It is found that the corrosion of p-Si/C particle surface is the main failure mechanisms on the eventual capacity loss, while Li plating on anode electrode surface is the main reason for the fast capacity loss in later stage of cycling. The volumetric capacity of Si anode highly depends on both electrode density and the Si content. Moreover, the prelithiation of Si anodes is found to increase energy density while decreasing cycle life of Si-based full cells. Finally, the pathways and strategies for adoption of micron-sized p-Si/C anodes in LIBs have been proposed for their practical applications.

25 ENERGY STORAGE↗

DOE OSTI2025

Perturbative stability of non-Abelian electric field solutions

We consider SU(2) gauge theory with a scalar field in the fundamental representation. The model is known to contain electric field solutions sourced by the scalar field that are distinct from embedded Maxwell electric fields. We examine the perturbative stability of the solution and identify a region of parameter space where the solution is stable. In the regime where the scalar field has a negative mass squared, the solution has two branches, and we identify an instability in one of the branches.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Enhancement of harmonic generation by an intense driving laser with high-order waveguide modes in a high-pressure gas-filled hollow waveguide

High-order harmonics have been widely used as reliable tabletop coherent radiation sources recently, but their applications have often been limited by the available pulse energy. Here, we report that by using an overdriven intense laser in a long waveguide with high-pressure gas, phase matching can be achieved in three distinct “regimes”. In the third regime, favorable phase matching is achieved at near-axis positions to enhance harmonic yields. Our results are supported by a full theoretical analysis, and we demonstrate that coupling of the driving laser with the high-order waveguide modes (instead of the fundamental mode used in most prior experiments) is responsible for achieving phase matching. Furthermore, we establish that this phase matching (and harmonic enhancement) is robust, and a scaling relation is derived for the necessary waveguide and gas parameters, allowing our predictions to be tested immediately in any laboratory today.

Li, Baochang [Nanjing University of Science and Te↗

DOE OSTI2024

Assessing the nature of large language models: A caution against anthropocentrism.

Generative AI models garnered a large amount of public attention and speculation with the release of OpenAI’s chatbot, ChatGPT in November of 2022. At least two opinion camps exist – one that is excited about the possibilities these models offer for fundamental changes to human tasks, and another that is highly concerned about the power these models seem to have – especially since the release of GPT-4, which was trained on multimodal data and has ~1.7 trillion (T) parameters. We evaluated some concerns regarding these models’ power by assessing GPT-3.5 using standard, normed, and validated cognitive and personality measures. These measures come from the tradition of psychometrics in experimental psychology and have a long history of providing valuable insights and predictive distinctions in humans. For this seedling project, we developed a battery of tests that allowed us to estimate the boundaries of some of these models’ capabilities, how stable those capabilities are over a short period of time, and how they compare to humans.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2023

Assessing the nature of large language models: A caution against anthropocentrism

Generative AI models garnered a large amount of public attention and speculation with the release of OpenAI’s chatbot, ChatGPT in November of 2022. At least two opinion camps exist – one that is excited about the possibilities these models offer for fundamental changes to human tasks, and another that is highly concerned about the power these models seem to have – especially since the release of GPT-4, which was trained on multimodal data and has ~1.7 trillion (T) parameters. We evaluated some concerns regarding these models’ power by assessing GPT 3.5 using standard, normed, and validated cognitive and personality measures. These measures come from the tradition of psychometrics in experimental psychology and have a long history of providing valuable insights and predictive distinctions in humans. For this seedling project, we developed a battery of tests that allowed us to estimate the boundaries of some of these models’ capabilities, how stable those capabilities are over a short period of time, and how they compare to humans.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1980

Rectenna array measurement results

The measured performance characteristics of a rectenna array are reviewed and compared to the performance of a single element. It is shown that the performance may be extrapolated from the individual element to that of the collection of elements. Techniques for current and voltage combining are demonstrated. The array performance as a function of various operating parameters is characterized and techniques for overvoltage protection and automatic fault clearing in the array are demonstrated. A method for detecting failed elements also exists. Instrumentation for deriving performance effectiveness is described. Measured harmonic radiation patterns and fundamental frequency scattered patterns for a low level illumination rectenna array are presented.

Dickinson, R. M.↗