Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fossil”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Scenario Discovery Analysis of Drivers of Solar and Wind Energy Transitions Through 2050

Deep human-Earth system uncertainties and strong multi-sector dynamics make it difficult to anticipate which conditions are most likely to lead to higher or lower adoption of renewable energy, and models project a broad range of future solar and wind energy shares across future scenarios. To elucidate these dynamics, we explore a large data set of scenarios simulated from the Global Change Analysis Model (GCAM) and use scenario discovery to identify the most significant factors affecting solar and wind adoption by mid-century. We generated a data set of over 4,000 scenarios from GCAM by varying 12 different socioeconomic factors at high and low levels, including assumptions about future energy demand, resource costs, and fossil fuel emissions paths, as well as specific technology assumptions including wind and solar backup requirements and storage costs. Using scenario discovery, we assess the most important factors globally and regionally in creating high fractions of solar and wind energy and explore interconnected effects on other systems including water and non-CO 2 emissions. Globally and regionally, we found that solar and wind-related technology costs were the primary drivers of high wind and solar energy adoption, though a few regions depend heavily on other parameters like carbon capture and storage costs, population and gross domestic product trajectories, and fossil fuel costs. We also identify four key paths to high solar and wind energy by mid-century and discuss their tradeoffs in terms of other outcomes.

14 SOLAR ENERGY↗

Using Multiscale Ethane/Methane Observations to Attribute Coal Mine Vent Emissions in the San Juan Basin From 2013 to 2021

Abstract Source attribution of natural gas emissions from fossil fuels in New Mexico's San Juan Basin (SJB) is challenging due to source heterogeneity and emissions transience. We demonstrate that ethane (C 2 H 6 ) to methane (CH 4 ) mixing ratios can identify and separate sources over different scales using various measurement techniques. We report simultaneous CH 4 and C 2 H 6 observations near a coal mine vent and oil and gas (O&G) emission sources using ground‐based in situ measurements in 2020/2021. During these campaigns, we observed a stable coal vent C 2 H 6 :CH 4 ratio of 1.28% ± 0.11%, discernibly different than nearby O&G source ratios ranging from 0.9% to 16.8%. We analyze airborne observations of the SJB taken in 2014/2015 that exhibit similar coal vent ratios and further show the region's heterogeneity. We identify episodic O&G sources, including a gas plant source detected in 2014/2015 that is absent in our 2020/2021 data. We examine total column observations of C 2 H 6 and CH 4 made in 2013 with a solar spectrometer and find a C 2 H 6 :CH 4 ratio of 1.3% ± 0.4% for the coal vent. The stable and unique coal vent ratio relative to other O&G sources in the region is used to demonstrate that consistent attribution is possible using various measurement methods at multiple scales across many years. Finally, we demonstrate that using C 2 H 6 as a proxy for fossil CH 4 inversions can inform detailed basin‐scale inversions, provided we understand source specific changes in the C 2 H 6 :CH 4 ratio like we report in the SJB.

54 ENVIRONMENTAL SCIENCES↗

Radiocarbon Fingerprinting Black Carbon Source History in the Himalayas

Abstract Black carbon (BC) is considered as an important contributor to the Himalayan glaciers melt in the past few decades. However, the long‐term source apportionment of BC remains unclear. Here we present the first radiocarbon ( 14 C)‐based annual variation of BC source apportionment in an ice core spanning the period of 1959–2012 drilled from the Southeastern Tibetan Plateau, a receptor site of South Asia outflow. We find fossil fuel combustion is a major contribution (73% ± 5%), yet the biomass burning fraction ( ƒ biomass ) has grown from 24% ± 4% to 30% ± 4% since 1990. Intriguingly, we further find the ƒ biomass demonstrating a robust correlation with South Asian wildfires linked to climate oscillations. Thus, for mitigating BC impacts on Himalayan glaciers, South Asia's transition from fossil fuels to clean energy is a more efficient and urgent strategy than reducing residential biomass burning.

Wang, Mo [State Key Laboratory of Tibetan Plateau ↗

Impact of solar panels on global climate

Regardless of the harmful effects of burning fossil fuels on global climate1,2, other energy sources will become more important in the future because fossil fuels could run out by the early twenty-second century3 given the present rate of consumption4. This implies that sooner or later humanity will rely heavily on renewable energy sources. Here we model the effects of an idealized large-scale application of renewable energy on global and regional climate relative to a background climate of the representative concentration pathway 2.6 scenario (RCP2.6; ref. 5). We find that solar panels alone induce regional cooling by converting incoming solar energy to electricity in comparison to the climate without solar panels. The conversion of this electricity to heat, primarily in urban areas, increases regional and global temperatures which compensate the cooling effect. However, there are consequences involved with these processes that modulate the global atmospheric circulation, resulting in changes in regional precipitation.

Environmental Sciences & Ecology↗

Southward shift of the northern tropical belt from 1945 to 1980

Regardless of the harmful effects of burning fossil fuels on global climate1,2, other energy sources will become more important in the future because fossil fuels could run out by the early twenty-second century3 given the present rate of consumption4. This implies that sooner or later humanity will rely heavily on renewable energy sources. Here we model the effects of an idealized large-scale application of renewable energy on global and regional climate relative to a background climate of the representative concentration pathway 2.6 scenario (RCP2.6; ref. 5). We find that solar panels alone induce regional cooling by converting incoming solar energy to electricity in comparison to the climate without solar panels. The conversion of this electricity to heat, primarily in urban areas, increases regional and global temperatures which compensate the cooling effect. However, there are consequences involved with these processes that modulate the global atmospheric circulation, resulting in changes in regional precipitation.

Geology↗

A cost comparison of various hourly-reliable and net-zero hydrogen production pathways in the United States

Hydrogen (H 2 ) as an energy carrier may play a role in various hard-to-abate subsectors, but to maximize emission reductions, supplied hydrogen must be reliable, low-emission, and low-cost. Here, we build a model that enables direct comparison of the cost of producing net-zero, hourly-reliable hydrogen from various pathways. To reach net-zero targets, we assume upstream and residual facility emissions are mitigated using negative emission technologies. For the United States (California, Texas, and New York), model results indicate next-decade hybrid electricity-based solutions are lower cost ($2.02-$2.88/kg) than fossil-based pathways with natural gas leakage greater than 4% ($2.73-$5.94/kg). These results also apply to regions outside of the U.S. with a similar climate and electric grid. However, when omitting the net-zero emission constraint and considering the U.S. regulatory environment, electricity-based production only achieves cost-competitiveness with fossil-based pathways if embodied emissions of electricity inputs are not counted under U.S. Tax Code Section 45V guidance.

08 HYDROGEN↗

Solventless, Ambient-Pressure Production of Bio-Based Lactones Over Earth-Abundant, Mixed Metal Oxide Catalysts for Circular Polyesters

Transitioning to a circular plastics economy will require use of renewable feedstocks, energy-efficient processes, and closed-loop recyclable polymers, such as polyesters. A key challenge lies in sustainably sourcing monomers used to make recyclable polyesters. This work presents a catalytic platform utilizing earth-abundant Cu(x)Ca(1-x)O mixed metal oxides for the oxidative dehydrocyclization of bio-based diols to lactones, which are advantaged for energy-efficient ring-opening polymerization. Operating below 200 degrees C, at ambient pressure, and without solvent, the process uses air as the sole oxidant, achieving high yields of lactones across a broad substrate scope of C4-8 diols in the liquid phase. The oxidative dehydrocyclization reaction is thermodynamically downhill due to water formation and energy-efficient compared to incumbent, non-redox pathways utilized in fossil carbon-based industrial processes for lactone production. Mechanistic studies reveal facile redox cycling of Cu2+-O(Ca2+)-Cu2+ interfacial sites unique to the developed catalyst. Techno-economic analysis and life cycle assessment estimate 40% lower energy demand and 15% lower GHG intensity per mass of butyrolactone produced compared to the fossil carbon-based route. Liquid-phase oxidative dehydrocyclization offers a promising approach for scalable lactone production from renewable, bio-based diols to enable circular polyesters.

36 MATERIALS SCIENCE↗

The development of molecular water oxidation catalysts

There is an urgent need to transition from fossil fuels to solar fuels $-$ not only to lower CO 2 emissions that cause global warming but also to ration fossil resources. Splitting H 2 O with sunlight emerges as a clean and sustainable energy conversion scheme that can afford practical technologies in the short-to-mid-term. A crucial component in such a device is a water oxidation catalyst (WOC). These artificial catalysts have been developed mainly over the past two decades, which is in contrast to nature’s WOCs, which have featured in its photosynthetic apparatus for more than a billion years. Recent times have seen the development of increasingly active molecular WOCs, the study of which affords an understanding of catalytic mechanisms and decomposition pathways. This Perspective offers a historical description of the landmark molecular WOCs, particularly ruthenium systems, that have guided research to our present degree of understanding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bio-Based Polymers with Performance-Advantaged Properties

Bio-based compounds with unique chemical functionality can be obtained through selective transformations of plant and other non-fossil, biogenic feedstocks for the development of new polymers to displace those produced from fossil carbon feedstocks. Although substantial efforts have been invested to produce bio-based polymers that are chemically identical to and directly replace those from petroleum, a long-pursued goal is to synthesize new, sustainable, bio-based polymers that either functionally replace or exhibit performance advantages relative to incumbent polymers. Owing to anthropogenic climate change and the environmental consequences of global plastics pollution, the need to realize a bio-based materials economy at scale is critical. To that end, in this Review we describe the concept of performance-advantaged, bio-based polymers (PBPs), highlighting examples wherein superior performance is facilitated by the inherent chemical functionality of bio-based feedstocks. We focus on PBPs with C–O and C–N inter-unit chemical bonds, as these are often readily accessible from bio-based feedstocks, which are heteroatom-rich relative to petroleum-derived feedstocks. Finally, we outline guiding principles and challenges to aid progress in the development of PBPs.

bio-based feedstock↗

Impaired photosynthesis and increased leaf construction costs may induce floral stress during episodes of global warming over macroevolutionary timescales

Global warming events have coincided with turnover of plant species at intervals in Earth history. As mean global temperatures rise, the number, frequency and duration of heat-waves will increase. Ginkgo biloba was grown under controlled climatic conditions at two different day/night temperature regimes (25/20 °C and 35/30 °C) to investigate the impact of heat stress. Photosynthetic CO 2 -uptake and electron transport were reduced at the higher temperature, while rates of respiration were greater; suggesting that the carbon balance of the leaves was adversely affected. Stomatal conductance and the potential for evaporative cooling of the leaves was reduced at the higher temperature. Furthermore, the capacity of the leaves to dissipate excess energy was also reduced at 35/30 °C, indicating that photo-protective mechanisms were no longer functioning effectively. Leaf economics were adversely affected by heat stress, exhibiting an increase in leaf mass per area and leaf construction costs. This may be consistent with the selective pressures experienced by fossil Ginkgoales during intervals of global warming such as the Triassic - Jurassic boundary or Early Eocene Climatic Optimum. The physiological and morphological responses of the $G$. biloba leaves were closely interrelated; these relationships may be used to infer the leaf economics and photosynthetic/stress physiology of fossil plants.

59 BASIC BIOLOGICAL SCIENCES↗

The Impact of Future Fuel Consumption on Regional Air Quality in Southeast Asia

Aerosols emitted from fossil fuel burning can cause air quality and human health issues. In this sensitivity study, we examine the impact of fossil fuel aerosols on air quality in Southeast Asia under five different hypothetical fuel consumption scenarios. These scenarios reflect air pollutant outcomes of implementations of certain idealized policies in the power generation, industry, and residential sectors. Analyses based on comparison among the modeling results from these scenarios reveal the sectors that should be targeted by air pollution mitigation policy. The results reveal that in Southeast Asia, sulfate could be decreased by 25% if coal were to be replaced by natural gas in the power generation and industry sectors. Black carbon concentration would reduce 42% overall if biofuel were replaced by natural gas in the residential sector. Shipping emissions are especially critical for the urban air quality in Singapore: fine particular matters (PM 2.5 ) could be dramatically cut by 69% in Singapore by merely eliminating shipping emissi

54 ENVIRONMENTAL SCIENCES↗

Mechanisms of soft tissue and protein preservation in Tyrannosaurus rex

Abstract The idea that original soft tissue structures and the native structural proteins comprising them can persist across geological time is controversial, in part because rigorous and testable mechanisms that can occur under natural conditions, resulting in such preservation, have not been well defined. Here, we evaluate two non-enzymatic structural protein crosslinking mechanisms, Fenton chemistry and glycation, for their possible contribution to the preservation of blood vessel structures recovered from the cortical bone of a Tyrannosaurus rex (USNM 555000 [formerly, MOR 555]). We demonstrate the endogeneity of the fossil vessel tissues, as well as the presence of type I collagen in the outermost vessel layers, using imaging, diffraction, spectroscopy, and immunohistochemistry. Then, we use data derived from synchrotron FTIR studies of the T. rex vessels to analyse their crosslink character, with comparison against two non-enzymatic Fenton chemistry- and glycation-treated extant chicken samples. We also provide supporting X-ray microprobe analyses of the chemical state of these fossil tissues to support our conclusion that non-enzymatic crosslinking pathways likely contributed to stabilizing, and thus preserving, these T. rex vessels. Finally, we propose that these stabilizing crosslinks could play a crucial role in the preservation of other microvascular tissues in skeletal elements from the Mesozoic.

59 BASIC BIOLOGICAL SCIENCES↗

Closed-loop recycling of mixed polyesters via catalytic methanolysis and monomer separations

A sustainable plastics future will require high recycling rates and the use of biogenic feedstocks, which together are catalyzing interest in replacing fossil fuel-derived, noncircular polyolefin packaging materials with bio-based, chemically recyclable polyesters. Here, in this study, we present a catalytic methanolysis process capable of depolymerizing both fossil fuel- and bio-based polyesters, including polyethylene terephthalate (PET), polylactic acid, polybutylene adipate terephthalate and polybutylene succinate in one reactor under mild conditions with high monomer yields. We scaled this process to 1 kg and integrated separations engineering using activated carbon, crystallization, extraction and distillation to remove contaminants and recover individual monomers from depolymerized mixed polyesters with high yield and purity. PET synthesized from monomers isolated from postconsumer materials showed comparable mechanical and thermal properties to PET from commercial monomers. Techno-economic analysis and life cycle assessment show that this process is economically viable and exhibits lower environmental impacts than primary production of respective polymers.

09 BIOMASS FUELS↗

Recent developments in the production of liquid fuels via catalytic conversion of microalgae: experiments and simulations

Due to continuing high demand, depletion of non-renewable resources and increasing concerns about climate change, the use of fossil fuel-derived transportation fuels faces relentless challenges both from a world markets and an environmental perspective. The production of renewable transportation fuel from microalgae continues to attract much attention because of its potential for fast growth rates, high oil content, ability to grow in unconventional scenarios, and inherent carbon neutrality. Moreover, the use of microalgae would minimize ‘‘food versus fuel’’ concerns associated with several biomass strategies, as microalgae do not compete with food crops in the food chain. This paper reviews the progress of recent research on the production of transportation fuels via homogeneous and heterogeneous catalytic conversions of microalgae. This review also describes the development of tools that may allow for a more fundamental understanding of catalyst selection and conversion processes using computational modelling. The catalytic conversion reaction pathways that have been investigated are fully discussed based on both experimental and theoretical approaches. Finally, this work makes several projections for the potential of various thermocatalytic pathways to produce alternative transportation fuels from algae, and identifies key areas where the authors feel that computational modelling should be directed to elucidate key information to optimize the process.

09 BIOMASS FUELS↗

A comparative technoeconomic analysis of renewable hydrogen production using solar energy

A technoeconomic analysis of photoelectrochemical (PEC) and photovoltaic-electrolytic (PV-E) solar-hydrogen production of 10 000 kg H 2 day -1 (3.65 kilotons per year) was performed to assess the economics of each technology, and to provide a basis for comparison between these technologies as well as within the broader energy landscape. Two PEC systems, differentiated primarily by the extent of solar concentration (unconcentrated and 10× concentrated) and two PV-E systems, differentiated by the degree of grid connectivity (unconnected and grid supplemented), were analyzed. In each case, a base-case system that used established designs and materials was compared to prospective systems that might be envisioned and developed in the future with the goal of achieving substantially lower overall system costs. With identical overall plant efficiencies of 9.8%, the unconcentrated PEC and non-grid connected PV-E system base-case capital expenses for the rated capacity of 3.65 kilotons H 2 per year were 205 dollars MM (293 dollars per m 2 of solar collection area (m S -2 ), 14.7 W H2,P -1 ) and 260 dollars MM ($371 m S -2 , 18.8 dollars W H2,P -1 ), respectively. The untaxed, plant-gate levelized costs for the hydrogen product (LCH) were $11.4 kg -1 and 12.1 dollars kg -1 for the base-case PEC and PV-E systems, respectively. The 10× concentrated PEC base-case system capital cost was 160 dollars MM (428 dollars m S -2 , 11.5 dollars W H2,P -1 ) and for an efficiency of 20% the LCH was 9.2 kg -1 . Likewise, the grid supplemented base-case PV-E system capital cost was 66 dollars MM (441 dollars m S -2 , 11.5 dollars W H2,P -1 ), and with solar-to-hydrogen and grid electrolysis system efficiencies of 9.8% and 61%, respectively, the LCH was 6.1 dollars kg -1 . As a benchmark, a proton-exchange membrane (PEM) based grid-connected electrolysis system was analyzed. Assuming a system efficiency of 61% and a grid electricity cost of $0.07 kWh -1 , the LCH was $5.5 kg -1 . A sensitivity analysis indicated that, relative to the base-case, increases in the system efficiency could effect the greatest cost reductions for all systems, due to the areal dependencies of many of the components. The balance-of-systems (BoS) costs were the largest factor in differentiating the PEC and PV-E systems. No single or combination of technical advancements based on currently demonstrated technology can provide sufficient cost reductions to allow solar hydrogen to directly compete on a levelized cost basis with hydrogen produced from fossil energy. Specifically, a cost of CO 2 greater than ~$800 dollars (ton CO 2 ) -1 was estimated to be necessary for base-case PEC hydrogen to reach price parity with hydrogen derived from steam reforming of methane priced at $12 GJ -1 ($1.39 (kg H 2 ) -1 ). A comparison with low CO 2 and CO 2 -neutral energy sources indicated that base-case PEC hydrogen is not currently cost-competitive with electrolysis using electricity supplied by nuclear power or from fossil-fuels in conjunction with carbon capture and storage. Solar electricity production and storage using either batteries or PEC hydrogen technologies are currently an order of magnitude greater in cost than electricity prices with no clear advantage to either battery or hydrogen storage as of yet. Significant advances in PEC technology performance and system cost reductions are necessary to enable cost-effective PEC-derived solar hydrogen for use in scalable grid-storage applications as well as for use as a chemical feedstock precursor to CO 2 -neutral high energy-density transportation fuels. Hence such applications are an opportunity for foundational research to contribute to the development of disruptive approaches to solar fuels generation systems that can offer higher performance at much lower cost than is provided by current embodiments of solar fuels generators. Efforts to directly reduce CO 2 photoelectrochemically or electrochemically could potentially produce products with higher value than hydrogen, but many, as yet unmet, challenges include catalytic efficiency and selectivity, and CO 2 mass transport rates and feedstock cost. Major breakthroughs are required to obtain viable economic costs for solar hydrogen production, but the barriers to achieve cost-competitiveness with existing large-scale thermochemical processes for CO 2 reduction are even greater.

14 SOLAR ENERGY↗

Life cycle energy use and greenhouse gas emissions of ammonia production from renewable resources and industrial by-products

Conventionally, ammonia is produced from natural gas via steam methane reforming (SMR), water-gas shift reaction, and the Haber–Bosch process. The process uses fossil natural gas, which leads to 2.6 metric tons of life cycle greenhouse gas (GHG) emissions per metric ton of ammonia produced. With ammonia being the second most produced chemical in the world, its production accounts for approximately 2% of worldwide fossil energy use and generates over 420 million tons of CO 2 annually. To reduce its carbon intensity, ammonia synthesis relying on renewable energy or utilizing by-products from industrial processes is of interest. In this work, we conduct a life cycle analysis of conventional and alternative ammonia production pathways by tracking energy use and emissions in all conversion stages, from the primary material and energy resources to the ammonia plant gates. Of all the alternative pathways, obtaining N 2 from cryogenic distillation and H 2 from low-temperature electrolysis using renewable electricity has the lowest cradle-to-plant-gate GHG emissions, representing a 91% decrease from the conventional SMR pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sustainable energy and fuels from biomass: a review focusing on hydrothermal biomass processing

Fossil fuels are being replaced with renewable energy resources (biomass and biomass waste, solar, geothermal, wind, etc.) to ensure sustainable development, reduce the dependence on fossil fuels, address environmental challenges including climate change. Today, biomass produces 5 × 10 19 kJ of energy/year, which corresponds to 10% of the annual global energy consumption. Considering the variety of biomass resources, this value is predicted to reach 150 × 10 19 kJ by 2050. Biomass may become even more important for use as an energy resource and chemical raw material in the 21st century. Hydrothermal biomass conversion stands out as a promising and alternative technology. Methods such as traditional gasification and pyrolysis require dry biomass. Hydrothermal techniques have been developed to eliminate the cost and time required for drying biomass. The purpose of this process is to decompose biomass with a high moisture content into small molecules and reduce its oxygen content to obtain liquid fuels or valuable chemicals. Finally, this review presents the current and future state of energy, energy sources, biomass properties and biomass conversion technologies with a focus on hydrothermal technologies.

09 BIOMASS FUELS↗