Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ferroelectrics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Ferroelectric-like SrTiO3 surface dipoles probed by graphene

The electrical transport properties of graphene are greatly influenced by its environment. Owing to its high dielectric constant, strontium titanate (STO) is expected to suppress the long-range charged impurity scattering and consequently to enhance the mobility. However, the absence of such enhancement has caused some controversies regarding the scattering mechanism. In graphene devices transferred from SiO2 to STO using a newly developed technique, we observe a moderate mobility enhancement near the Dirac point, which is the point of charge neutrality achieved by adjusting the Fermi level. While bulk STO is not known as a ferroelectric material, its surface was previously reported to exhibit an outward displacement of oxygen atoms and ferroelectric-like dipole moment. When placed on STO, graphene shows strong and asymmetric hysteresis in resistivity, which is consistent with the dipole picture associated with the oxygen displacement. The hysteretic response of the surface dipole moment diminishes the polarizability, therefore weakens the ability of STO to screen the Coulomb potential of the impurities.

GRAPHENE↗

Data encoding based on the shape of the ferroelectric domains produced by a scanning probe microscopy tip

Ferroelectric materials are broadly considered for information storage due to extremely high storage and information processing densities they enable. To date, ferroelectric based data storage has invariably relied on formation of cylindrical domains, allowing for binary information encoding. Here we demonstrate and explore the potential of high-density encoding based on domain morphology. We explore the domain morphogenesis during the tip-induced polarization switching by sequences of positive and negative pulses in a lithium niobate single-crystal and demonstrate the principal of information coding by shape and size of the domains. We applied cross-correlation and neural network approaches for recognition of the switching sequence by the shape of the resulting domains and establish optimal parameters for domain shape recognition. These studies both provide insight into the highly non-trivial mechanism of domain switching and potentially establish a new paradigm for multilevel information storage and content retrieval memories. Furthermore, this approach opens a pathway to exploration of domain switching mechanisms via shape analysis.

97 MATHEMATICS AND COMPUTING↗

Giant spontaneous polarization for enhanced ferroelectric properties of biaxially oriented poly(vinylidene fluoride) by mobile oriented amorphous fractions

Poly(vinylidene fluoride) (PVDF) and its random copolymers exhibit the most distinctive ferroelectric properties; however, their spontaneous polarization (60–105 mC m -2 ) is still inferior to those (>200 mC m -2 ) of the ceramic counterparts. In this work, we report an unprecedented spontaneous polarization ( P s = 140 mC m -2 ) for a highly poled biaxially oriented PVDF (BOPVDF) film, which contains a pure β crystalline phase. Given the crystallinity of ~0.52, the P s for the β phase ( P s,β ) is calculated to be 279 mC m -2 , if a simple two-phase model of semicrystalline polymers is assumed. This high P s,β is invalid, because the theoretical limit of P s,β is 185 mC m -2 , as calculated by density functional theory. To explain such a high P s for the poled BOPVDF, a third component in the amorphous phase must participate in the ferroelectric switching to contribute to the P s . Namely, an oriented amorphous fraction (OAF) links the lamellar crystal and the mobile amorphous fraction. From the hysteresis loop study, the OAF content was determined to be ~0.28, more than 50% of the amorphous phase. Because of the high polarizability of the OAFs, the dielectric constant of the poled BOPVDF reached nearly twice the value of conventional PVDF. Overall, the fundamental knowledge obtained from this study will provide a solid foundation for the future development of PVDF-based high performance electroactive polymers for wearable electronics and soft robotic applications.

36 MATERIALS SCIENCE↗

Design of high polarization low switching barrier hybrid improper ferroelectric perovskite oxide superlattices

Hybrid improper ferroelectricity is a useful tool to design ABO 3 /A'BO 3 polar superlattices from non polar building blocks. In this study, we have designed high polarization-low switching barrier hybrid improper ferroelectric superlattices with efficient polarization, and polarization-magnetization switching properties above room temperature, using density functional theory and ab initio molecular dynamics simulations. Superlattices with a chemical formula of (AAlO 3 ) m /(A'AlO 3 ) n , where m/n = 1/1, 1/3, 3/1, 1/5 and 5/1, A, A' = Lanthanide and Y cations are considered to outline the design principles behind polarization switching and (LaFeO 3 ) 3 /(CeFeO 3 ) 1 is investigated for polarization-magnetization switching. We find that the unconventional switching paths via out-of-phase rotation Q R- (a 0 a 0 c - ) and tilt precession QTP always yield lower switching barrier compared to those via in-phase rotation Q R+ (a 0 a 0 c + ) and tilt QT (a - a - c 0 ) of BO 6 octahedra. Results from ab initio molecular dynamics simulations estimate the temperature at which the lowest energy barrier can be overcome. Furthermore, it is possible to tune the polarization switching barrier by tuning the tolerance factor, A,A' cation radius mismatch and super lattice periodicity. For switching via Q R- , the switching barrier varies exponentially with rotation angle, indicating how high switching barrier is expected for systems, away from cubic symmetry. We provide a recipe to overcome such a bottleneck by tuning superlattice periodicity. Finally, we have proposed the multiferroic device application concept through a proposed polarization-temperature hysteresis loop and magnetization switching.

36 MATERIALS SCIENCE↗

Evolution of ferroelectric domain structures embedded inside polychrystalline BaTiO3 during heating

The evolution of ferroelectric domains inside a single grain of a polycrystalline BaTiO{sub 3} ceramic was investigated under quasistatic heating by using polychromatic scanning x-ray microdiffraction. Four domain orientations were observed, three of which exhibited a classic of {approx}90{sup o} ferroelastic relationship. The fourth domain orientation was found to be crystallographically related with one of the other orientations by a rotation of either 180.47{sup o} or 0.47{sup o}. While heating the polycrystalline BaTiO{sub 3} from room temperature to above the Curie temperature (125 C), all four ferroelectric domain orientations rotated toward a paraelectric cubic orientation which was found to be at an intermediate orientation relative to the four domain orientations. The crystallographic relationships of the domains with respect to paraelectric phase were explained using a domain structure model by Nepochatenko.

36 MATERIALS SCIENCE↗

Pyroelectric response of ferroelectric nanowires: Size effect and electric energy harvesting

The size effect on pyroelectric response of ferroelectric nanowires is analyzed. The pyroelectric coefficient strongly increases with the wire radius decrease and diverges at critical radius Rcr corresponding to the size-driven transition into paraelectric phase. Size-driven enhancement of pyroelectric coupling leads to the giant pyroelectric current and voltage generation by the polarized ferroelectric nanoparticles in response to the temperature fluctuation. The maximum efficiency of the pyroelectric energy harvesting and bolometric detection is derived, and is shown to approach the Carnot limit for low temperatures.

Morozovska, A. N.↗

Strong strain dependence of ferroelectric coercivity in a BiFeO3 film

The ferroelectric polarization loop of an epitaxial BiFeO3 film on a piezoelectric substrate has been measured as a function of the continuously and reversibly varied biaxial strain of e = 0.36 0.51 %. Over this range, the ferroelectric coercive field (Ec) at 80 K increases reversibly by 36 % with the increasing tensile strain. The strain dependence of the remanent polarization agrees with previous experimental results and simulations based on thermodynamic considerations. In contrast, such calculations predict dEc/de <0, contradicting our experiments. Thus, the strain dependence of kinetic barriers influencing the rates of domain wall nucleation and propagation which are neglected in thermodynamic models may dominate the observed positive dEc/de.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A high-k ferroelectric relaxor terpolymer as a gate dielectric for orgnaic thin film transistors

Poly(vinylidenefluoride-trifluoroethylene-chlorofluoroethylene) (P(VDF-TrFE-CFE)) is a ferroelectric terpolymer relaxor with a static dielectric constant of 50, which was developed using defect modification to eliminate remnant polarization in the normal ferroelectric PVDF. In this work, this solution processable terpolymer was used as the gate insulator in bottom gated organic thin-film transistors with a pentacene semiconductor layer. Due to the high dielectric constant of P(VDF-TrFE- CFE), a large capacitive coupling between the gate and channel can be achieved which causes a high charge concentration at the interface of the semiconductor and dielectric layers. In this device, an on/ off ratio of 104 and a low minimum operation gate voltage (5-10 V) were attained

Wu, Shan↗

Interface control of ferroelectricity in LaNiO{sub 3}-BaTiO{sub 3} superlattices

LaNiO{sub 3}-BaTiO{sub 3} superlattices with different types of interfaces are studied from first-principles density-functional theory. It is revealed that the ferroelectricity in the superlattice with (NiO{sub 2}){sup −}/(BaO){sup 0} interfaces is enhanced from that of the superlattice with (LaO){sup +}/(TiO{sub 2}){sup 0} interfaces. The origin lies at the polar discontinuity at the interface, which makes the holes localized within the (NiO{sub 2}){sup −}/(BaO){sup 0} interface, but drives a penetration of electrons into BaTiO{sub 3} component near (LaO){sup +}/(TiO{sub 2}){sup 0} interface. Our calculations demonstrate an effective avenue to the robust ferroelectricity in BaTiO{sub 3} ultrathin films.

36 MATERIALS SCIENCE↗

On the structural origins of ferroelectricity in HfO{sub 2} thin films

Here, we present a structural study on the origin of ferroelectricity in Gd doped HfO{sub 2} thin films. We apply aberration corrected high-angle annular dark-field scanning transmission electron microscopy to directly determine the underlying lattice type using projected atom positions and measured lattice parameters. Furthermore, we apply nanoscale electron diffraction methods to visualize the crystal symmetry elements. Combined, the experimental results provide unambiguous evidence for the existence of a non-centrosymmetric orthorhombic phase that can support spontaneous polarization, resolving the origin of ferroelectricity in HfO{sub 2} thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of interfacial coherency on ferroelectric switching of superlattice BaTiO 3 /SrTiO 3

Switching behavior of (BaTiO 3 ) 8 /(SrTiO 3 ) 4 heterostructure superlattice grown on SrTiO 3 substrate was studied by employing the phase field method. To investigate the constraint effect of the substrate on switching, three types of superlattice/substrate interface mechanical relaxation conditions were considered, i.e. the fully ommensurate, partially relaxed and fully relaxed. Our simulation results demonstrated that the hysteresis loops under the three types of constraints were very different. The interfacial coherency affects dramatically the coercivity and remanence of the superlattice films. The mechanism of the hysteresis loop varying with interfacial coherency was analyzed by the ferroelectric domain configuration and its evolution during the switching process. Finally, the hysteresis loop of fully relaxed superlattice shows application potential on ferroelectric energy storage materials.

36 MATERIALS SCIENCE↗

Unusual soft mode dynamics in ferroelectric PbTiO 3 , nanowire under different mechanical boundary conditions

Here, first-principles-based atomistic simulations are used to investigate equilibrium phases and soft mode dynamics in ultrathin ferroelectric PbTiO 3 nanowire with poor surface charge compensation subjected to a wide range of mechanical boundary conditions. The presence of the depolarizing field along the nanowire's transverse directions leads to the appearance of a unique high-frequency hard phonon mode that can be used to characterize electrical boundary conditions. This mode is insensitive to the mechanical load. Hydrostatic pressure was found to significantly influence the Curie point and ferroelectric soft modes in the nanowire. Uniaxial stress applied either along axial or transverse nanowire's direction is capable of inducing polydomain flux-closure phases that have a unique ``dynamical" fingerprint. In such phases the modes that originate from the soft modes of bulk PbTiO 3 become hard, which could open a way to potential identification of such nanodomain phases. In all cases, uniaxial stress significantly increases Curie temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time-of-flight neutron total scattering with applied electric fields: Ex situ and in situ studies of ferroelectric materials

Characterizing the structural response of functional materials (e.g., piezoelectrics and ferroelectrics) to electric fields is key for the creation of structure-property relationships. Here in this paper, we present a new sample environment and data reduction routines which allow the measurement of time-of-flight neutron total scattering during the in situ or ex situ application of high voltage (<10 kV) to a sample. Instead of utilizing the entire detector space of the diffractometer, only selected regions of detector pixels with scattering at the desired angle to the sample electric field are interrogated, which allows the generation of orientation-dependent reciprocal space patterns and real-space pair distribution functions (PDFs). We demonstrate the method using the relaxor ferroelectric Na 1/2 Bi 1/2 TiO 3 and observe lattice expansion parallel and contraction perpendicular to the electric field for both in situ or ex situ experiments, revealing the irreversible nature of the local scale structural changes to this composition. Additionally, changes in the distributions of nearest neighbor metal-oxygen bond lengths are observed, which have been difficult to observe in previously measured analogous orientation-dependent X-ray PDFs. Lastly, considerations related to sample positioning and background subtraction are discussed, and future research directions are suggested.

36 MATERIALS SCIENCE↗

Correlation of cation deficiency and nanostructure to decreased magnetism in a ferroelectric BiMnO3 film

The pseudoperovskite BiMnO 3 is a multiferroic candidate, but missing details of materials properties are impeding potential technological applications. BiMnO 3 has a centrosymmetric structure that precludes ferroelectricity in bulk stoichiometric samples, while some films have reported ferroelectricity along with a decreased magnetic response. This puzzle motivated a study of one such film, deposited by pulsed laser deposition onto SrTiO 3 . Probes utilized include microscopy, diffraction, reflectometry, and X-ray absorption. These experiments in the context of the existing literature show an anomalous unit-cell volume and a (magnetic) depth profile. Then, the resulting inhomogeneous deficiency of Bi and Mn metals may stabilize a multiphase system that explains the decreased magnetism. Film nanostructure and strain effects are also considered.

36 MATERIALS SCIENCE↗

Ferroelectric properties of ion-irradiated bismuth ferrite layers grown via molecular-beam epitaxy

We systematically investigate the role of defects, introduced by varying synthesis conditions and by carrying out ion irradiation treatments, on the structural and ferroelectric properties of commensurately strained bismuth ferrite Bi x Fe 2-x O 3 layers grown on SrRuO 3 -coated DyScO 3 (110) o substrates using adsorption-controlled ozone molecular-beam epitaxy. Our findings highlight ion irradiation as an effective approach for reducing through-layer electrical leakage, a necessary condition for the development of reliable ferroelectrics-based electronics.

36 MATERIALS SCIENCE↗

A new era in ferroelectrics

Topological structures in ferroic materials have drawn great interest in recent years due to the richness of the underlying physics and the potential for applications in next generation electronics. Recent advances in atomically precise thin-film materials synthesis and characterization of structural/physical phenomena at unprecedented length/energy/time scales have enabled us to study exotic phases and their associated physics [Rößler et al., Nature 442, 797 (2006); S. Das, Nature 568, 368 (2019); Yadav et al., Nature 530, 198 (2016); and Stoica et al., Nat. Mater. 18, 377 (2019)]. It is appropriate that, in the second century of ferroelectrics, some dramatic discoveries are propelling the field into directions heretofore unimaginable. In this review, we explore the recent progress in ferroelectric-oxide superlattices in which researchers can control structure and physical properties through the application of epitaxial strain, layer thickness, temperature, electric field, etc. We provide a discussion of exotic topological structures (e.g., closure domains, vortices, polar skyrmions, and other exotic phases) and associated functionalities in ferroelectric/paraelectric superlattices. We conclude with a brief overview of and prospects for how the field may evolve in the coming years.

36 MATERIALS SCIENCE↗

Robust low-temperature (350 °C) ferroelectric Hf 0.5 Zr 0.5 O 2 fabricated using anhydrous H 2 O 2 as the ALD oxidant

Here, in this Letter, the robust ferroelectric properties of low-temperature (350 °C) Hf 0.5 Zr 0.5 O 2 (HZO) films are investigated. We demonstrate that the lower crystallization temperature of HZO films originates from a densified film deposition with an anhydrous H 2 O 2 oxidant in the atomic layer deposition process. As a consequence of this densification, H 2 O 2 -based HZO films showed completely crystallinity with fewer defects at a lower annealing temperature of 350 °C. This reduction in the crystallization temperature additionally suppresses the oxidation of TiN electrodes, thereby improving device reliability. The low-temperature crystallization process produces an H 2 O 2 -based HZO capacitor with a high remanent polarization ( P r ), reduced leakage current, high breakdown voltage, and better endurance. Furthermore, while an O 3 -based HZO capacitor requires wake-up cycling to achieve stable P r , the H 2 O 2 -based HZO capacitor demonstrates a significantly reduced wake-up nature. Anhydrous H 2 O 2 oxidant enables the fabrication of a more reliable ferroelectric HZO device using a low process thermal budget (350 °C).

36 MATERIALS SCIENCE↗

Ferroelectric AlBN films by molecular beam epitaxy

We report the properties of molecular beam epitaxy deposited AlBN thin films on a recently developed epitaxial nitride metal electrode, Nb2N. While a control AlN thin film exhibits standard capacitive behavior, distinct ferroelectric switching is observed in the AlBN films with increasing Boron mole fraction. The measured remnant polarization Pr∼15μC/cm2 and coercive field Ec∼ 1.45 MV/cm in these films are smaller than those recently reported on films deposited by sputtering, due to incomplete wake-up, limited by current leakage. Because AlBN preserves the ultrawide energy bandgap of AlN compared to other nitride hi-K dielectrics and ferroelectrics, and it can be epitaxially integrated with GaN and AlN semiconductors, its development will enable several opportunities for unique electronic, photonic, and memory devices.

Physics↗