Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “examination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

An examination of the precipitation behavior of proton irradiated dual phase 308L weldment filler materials

Voids, G phase particles, and Ni-Si rich clusters in proton irradiated dual phase 308L groove filler of a SA508–304 L dissimilar metal weldment are analyzed using advanced characterization techniques. These weldments are often used in light water nuclear reactors and are subject to enhanced corrosion and associated stress corrosion cracking (SCC). Radiation damage is known to accelerate SCC. Ni-Si enriched clusters were observed in proton irradiated γ austenite, while G phase M 6 Ni 16 Si 7 (where M transition metal element) precipitates were observed in proton irradiated δ ferrite. Compositional analysis of the G phase precipitates and Ni-Si clusters from STEM-EDS and APT are compared. Unlike G phase particles in proton irradiated δ ferrite, Ni-Si clusters in proton irradiated γ austenite are not rich in Mn. Both STEM-EDS and APT line-scan profiles of the Ni-Si clusters show that the Fe and Cr concentration gradient between matrix γ austenite and the Ni-Si clusters is not as sharp as those between matrix δ ferrite and G phase. Further, HR-STEM imaging indicates that the lattice parameter of the Ni-Si clusters is commensurate with γ austenite and the clusters do not represent the precipitation of a second phase. Finally, our analysis demonstrates the density and volume fraction of G phase particles and the density of voids scales with proton irradiation damage and the energy to recoils.

308L groove filler↗

Examining the microtexture evolution in a hole-edge punched into 780 MPa grade hot-rolled steel

The deformation behavior in the hole-edge of 780 MPa grade hot-rolled steel during the punching process was investigated via microstructure characterization and computational simulation. Microstructure characterization was conducted to observe the edges of punched holes through the thickness direction, and electron back-scattered diffraction (EBSD) was used to analyze the heterogeneity of the deformation. Finite element analysis (FEA) that could account for a ductile fracture criterion was conducted to simulate the deformation and fracture behaviors of 780 MPa grade hot-rolled steel during the punching process. Calculation of rotation rate fields at the edges of the punched holes during the punching process revealed that metastable orientations in Euler space were confined to specific orientation groups. Rotation-rate fields effectively explained the stability of the initial texture components in the hole-edge region during the punching process. A visco-plastic self-consistent (VPSC) polycrystal model was used to calculate the microtexture evolution in the hole-edge region during the punching process. FEA revealed that the heterogeneous effective strain was closely related to the heterogeneity of the Kernel average misorientation (KAM) distribution in the hole-edge region. A simulation of the deformation microtexture evolution in the hole-edge region using a VPSC model was in good agreement with the experimental results. - Highlights: •We analyzed the microstructure in a hole-edge punched in HR 780HB steel. •Rotation rate fields revealed the stability of the initial texture components. •Heterogeneous effective stain was closely related to the KAM distribution. •VPSC model successfully simulated the deformation microtexture evolution.

36 MATERIALS SCIENCE↗

Examining the creep strengthening nanoprecipitation in novel highly reinforced heat resistant steels

Here we studied the creep strengthening nanoprecipitation in novel heat resistant steels strengthened by a high density of stable nanoprecipitates. The results show that the high number density of MX nanoprecipitates within the martensitic laths in these steels comes from the great amount of MX former elements present in their chemical compositions and the high dislocation density generated by the martensitic transformation that takes place during cooling after austenitization. These dislocations act as nucleation sites for these nanoprecipitates during the tempering applied after the austenitization and quenching. Atom probe tomography measurements show that these nanoprecipitates are rich in Nb, V, Cr and N for the HDSN1 and HDSN2 steels and V, Cr and N for the HDSN3 steel. The distribution of the nanoprecipitates within the martensitic laths suggests that the creep strengthening produced by the Nb, V, Cr and N nanoprecipitates in the HDSN1 and HDSN2 steels is more effective at pinning dislocations at high temperature than that obtained in the HDSN3 steel by the V, Cr and N nanoprecipitates. However, the high amount of W in the HDSN3 steel enhances the solid solution strengthening at high temperatures, resulting in a similar high temperature strength for all HDSN steels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A detailed examination of the growth of CdSe thin films through structural and optical characterization

Highlights: ► Urbach tail width decreases by about 200 meV with the film thickness. ► A coefficient of strain of around 3 × 10{sup −3} along [0 0 2] axis was predicted. ► Compressive strain gives rise to about 11 meV red shift in the band gap energy. ► A relative shift of about 2 cm{sup −1} of LO{sub 1} phonon mode in Raman spectra was observed between different thickness films. - Abstract: Different thickness CdSe thin films were grown on glass substrates by physical vapor deposition and characterized by optical and structural investigations. Urbach energy related to the width of the optical absorption tail decreases from 430 meV for a film thickness of 50 nm to 200 meV for 450 nm. The film thickness dependent grain sizes were estimated by using effective mass model under quantum size effect from the shift of around 500 meV in the asymptotic absorption edge. The X-ray diffraction (XRD) pattern is consistent with CdSe hexagonal crystal structure which indicates crystal growth mode along c axis. XRD peaks broaden and shift depending on film thicknesses which are presumably due to strain and size effect. We observe both blue and red shift depending on thickness in Longitudinal Optical phonon frequency in Raman spectra with respect to that of the source CdSe powder which could also be due to strain on thin films and/or finite crystallite size. In this work we combine the results of optical absorption, Raman and XRD spectroscopies to study the evolution of grain size, strain and structural disorder depending on film thickness.

36 MATERIALS SCIENCE↗

Synchrotron Radiation Circular Dichroism (SRCD) Spectroscopy: An Emerging Method in Structural Biology for Examining Protein Conformations and Protein Interactions

Circular dichroism (CD) spectroscopy is a well-established technique in structural biology. The use of synchrotron radiation as an intense light source for these measurements extends the applications possible using lab-based instruments. In recent years, there has been a major growth in synchrotron radiation circular dichroism (SRCD) beamlines worldwide, including ones at the NSLS, ISA, SRS, HiSOR, BSRF, NSRRC, SOLEIL, Diamond, TERAS, BESSYII, and ANKA synchrotrons. Through the coordinated efforts of beamline scientists and users at these sites, important proof-of-principle studies have been done enabling the method to be developed for novel and productive studies on biological systems. This paper describes the characteristics of SRCD beamlines and some of the new types of applications that have been undertaken using these beamlines.

43 PARTICLE ACCELERATORS↗

Re-examining the premise of isobaric collisions and a novel method to measure the chiral magnetic effect

In these proceedings we show that the premise of the isobaric and collisions to search for the chiral magnetic effect (CME) may not hold as originally anticipated due to large uncertainties in the isobaric nuclear structures. We demonstrate this using Woods-Saxon densities and the proton and neutron densities calculated by the density functional theory. Furthermore, a novel method is proposed to gauge background and possible CME contributions in the same system, intrinsically better than the isobaric collisions of two different systems. We illustrate the method with Monte Carlo Glauber and AMPT (A Multi-Phase Transport) simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗