Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coronal density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

BROADBAND SPECTRAL ANALYSIS OF THE GALACTIC RIDGE X-RAY EMISSION

Detailed spectral analysis of the Galactic X-ray background emission, or the Galactic Ridge X-ray Emission (GRXE), is presented. To study the origin of the emission, broadband and high-quality GRXE spectra were produced from 18 pointing observations with Suzaku in the Galactic bulge region, with a total exposure of 1 Ms. The spectra were successfully fitted by a sum of two major spectral components: a spectral model of magnetic accreting white dwarfs with a mass of 0.66{sup +0.09}{sub -0.07} M{sub Sun} and a softer optically thin thermal emission with a plasma temperature of 1.2-1.5 keV that is attributable to coronal X-ray sources. When combined with previous studies that employed high spatial resolution of the Chandra satellite, the present spectroscopic result gives stronger support to the scenario that the GRXE is essentially an assembly of numerous discrete faint X-ray stars. The detected GRXE flux in the hard X-ray band was used to estimate the number density of the unresolved hard X-ray sources. When integrated over a luminosity range of {approx}10{sup 30}-10{sup 34} erg s{sup -1}, the result is consistent with a value that was reported previously by directly resolving faint point sources.

79 ASTRONOMY AND ASTROPHYSICS↗

Solar Dynamics Observatory and Hinode Observations of a Blowout Jet in a Coronal Hole

A blowout jet occurred within the south coronal hole on 9 February 2011 at 09:00 UT and was observed by the Atmospheric Imaging Assembly (AIA) and Helioseismic and Magnetic Imager (HMI) onboard the Solar Dynamics Observatory, and by the EUV Imaging Spectrometer (EIS) and X-Ray Telescope (XRT) onboard the Hinode spacecraft during coronal-hole monitoring performed as part of Hinode Operations Program No. 177. Images from AIA show expanding hot and cold loops from a small bright point with plasma ejected in a curtain up to 30 Mm wide. The initial intensity front of the jet had a projected velocity of 200 km/s, and the line-of-sight (LOS) velocities measured by EIS are between 100 and 250 km/s. The LOS velocities increased along the jet, implying that an acceleration mechanism operates within the body of the jet. The jet plasma had a density of 2.7×10(exp 8) /cu.cm and a temperature of 1.4 MK. During the event a number of bright kernels were seen at the base of the bright point. The kernels have sizes of ≈ 1000 km, are variable in brightness, and have lifetimes of 1 - 15 minutes. An XRT filter ratio yields temperatures of 1.5 - 3.0 MK for the kernels. The bright point existed for at least ten hours, but disappeared within two hours after the jet, which lasted for 30 minutes. HMI data reveal converging photospheric flows at the location of the bright point, and the mixed-polarity magnetic flux canceled over a period of four hours on either side of the jet.

Spectral line↗

FIRST MEASUREMENTS OF THE MASS OF CORONAL MASS EJECTIONS FROM THE EUV DIMMING OBSERVED WITH STEREO EUVI A+B SPACECRAFT

The masses of coronal mass ejections (CMEs) have traditionally been determined from white-light coronagraphs (based on Thomson scattering of electrons), as well as from extreme ultraviolet (EUV) dimming observed with one spacecraft. Here we develop an improved method of measuring CME masses based on EUV dimming observed with the dual STEREO/EUVI spacecraft in multiple temperature filters that includes three-dimensional volume and density modeling in the dimming region and background corona. As a test, we investigate eight CME events with previous mass determinations from STEREO/COR2, of which six cases are reliably detected with the Extreme Ultraviolet Imager (EUVI) using our automated multi-wavelength detection code. We find CME masses in the range of m {sub CME} = (2-7) x 10{sup 15} g. The agreement between the two EUVI/A and B spacecraft is m{sub A} /m{sub B} = 1.3 +- 0.6 and the consistency with white-light measurements by COR2 is m{sub EUVI}/m{sub COR2} = 1.1 +- 0.3. The consistency between EUVI and COR2 implies no significant mass backflows (or inflows) at r < 4 R{sub sun} and adequate temperature coverage for the bulk of the CME mass in the range of T approx 0.5-3.0 MK. The temporal evolution of the EUV dimming allows us to also model the evolution of the CME density n{sub e} (t), volume V(t), height-time h(t), and propagation speed v(t) in terms of an adiabatically expanding self-similar geometry. We determine e-folding EUV dimming times of t{sub D} = 1.3 +- 1.4 hr. We test the adiabatic expansion model in terms of the predicted detection delay (DELTAt approx 0.7 hr) between EUVI and COR2 for the fastest CME event (2008 March 25) and find good agreement with the observed delay (DELTAt approx 0.8 hr).

79 ASTRONOMY AND ASTROPHYSICS↗

Standing Kink modes in three-dimensional coronal loops

So far, the straight flux tube model proposed by Edwin and Roberts is the most commonly used tool in practical coronal seismology, in particular, to infer values of the (coronal) magnetic field from observed, standing kink mode oscillations. In this paper, we compare the period predicted by this basic model with three-dimensional (3D) numerical simulations of standing kink mode oscillations, as the period is a crucial parameter in the seismological inversion to determine the magnetic field. We perform numerical simulations of standing kink modes in both straight and curved 3D coronal loops and consider excitation by internal and external drivers. The period of oscillation for the displacement of dense coronal loops is determined by the loop length and the kink speed, in agreement with the estimate based on analytical theory for straight flux tubes. For curved coronal loops embedded in a magnetic arcade and excited by an external driver, a secondary mode with a period determined by the loop length and external Alfvén speed is also present. When a low number of oscillations is considered, these two periods can result in a single, non-resolved (broad) peak in the power spectrum, particularly for low values of the density contrast for which the two periods will be relatively similar. In that case (and for this particular geometry), the presence of this additional mode would lead to ambiguous seismological estimates of the magnetic field strength.

79 ASTRONOMY AND ASTROPHYSICS↗

THREE-DIMENSIONAL GEOMETRY OF A CURRENT SHEET IN THE HIGH SOLAR CORONA: EVIDENCE FOR RECONNECTION IN THE LATE STAGE OF THE CORONAL MASS EJECTIONS

Motivated by the standard flare model, ray-like structures in the wake of coronal mass ejections (CMEs) have been often interpreted as proxies of the reconnecting current sheet connecting the CME with the postflare arcade. We present the three-dimensional properties of a post-CME ray derived from white light images taken from three different viewing perspectives on 2013 September 21. By using a forward modeling method, the direction, cross section, and electron density are determined within the heliocentric distance range of 5–9 R {sub ⊙}. The width and depth of the ray are 0.42 ± 0.08 R {sub ⊙} and 1.24 ± 0.35 R {sub ⊙}, respectively, and the electron density is (2.0 ± 0.5) × 10{sup 4} cm{sup 3}, which seems to be constant with height. Successive blobs moving outward along the ray are observed around 13 hr after the parent CME onset. We model the three-dimensional geometry of the parent CME with the Gradual Cylindrical Shell model and find that the CME and ray are coaxial. We suggest that coaxial post-CME rays, seen in coronagraph images, with successive formation of blobs could be associated with current sheets undergoing magnetic reconnection in the late stage of CMEs.

79 ASTRONOMY AND ASTROPHYSICS↗

Rocket observations of solar UV radiation during the eclipse of 7 March 1970.

Results of observations of the solar eclipse of Mar. 7, 1970, with photometers sensitive to narrow bands of radiation at Lyman-alpha (1216 A) and at 2600 A included in the payloads of four Nike Apache rockets flown before and during the eclipse. At the center of totality, the flux of Lyman-alpha from the solar corona is 0.15% of the flux from the unobscured sun. The flux at second contact is 0.64%; at third contact, two observations give 0.52 and 0.59%. The brightness of the chromosphere in Lyman-alpha decreases exponentially over the range from 5 to 30 arc-sec from the limb with a scale height of 3835 plus or minus 70 km. In addition to the coronal and chromospheric Lyman-alpha a diffuse source is found. This is restricted to within 20 deg of the earth's horizon and is nearly uniform in azimuth at 170 km, the flux is about 3% of that from the unobscured sun. The flux of Lyman-alpha during the eclipse is considered in relation to the observed variation in electron density. It is concluded that, in totality, the ionosphere near 80 km is not in equilibrium with the ionizing radiation and that the production rate for electrons is not negligible if the loss process is recombination; it is negligible if the loss process is attachment-like.

Smith, L. G.↗

Analysis of X-ray observations of the 15 June 1973 flare in active region NOAA 131

Observations and analyses of the 1B/M3 flare of 15 June, 1973 in active region NOAA 131 (McMath 12379) are presented. The X-ray observations, consisting of broadband photographs and proportional counter data from the Skylab/ATM NASA-MSFC/Aerospace S-056 experiment, are used to infer temperatures, emission measures, and densities for the flaring plasma. The peak temperature from the spatially resolved photographs is 25,000,000 K, while the temperature from the full-disk proportional counter data is approximately 15,000,000 K. The density is 3 times 10 to the 10th/cu cm. The X-ray flare emission appears to come primarily from two low-lying curvilinear features lying perpendicular to and centered on the line where the photospheric longitudinal magnetic field is zero. Similarities in the preflare and postflare X-ray emission patterns indicate that no large-scale relaxation of the coronal magnetic configuration was observed. Also discussed are H-alpha and magnetic field observations of the flare and the active region. Finally, results of numerical calculations, including thermal conduction, radiative loss, and chromospheric evaporation, are in qualitative agreement with the decay phase observations.

Krall, K. R.↗

Energy-Dependent Ionization States of Shock-Accelerated Particles in the Solar Corona

We examine the range of possible energy dependence of the ionization states of ions that are shock-accelerated from the ambient plasma of the solar corona. If acceleration begins in a region of moderate density, sufficiently low in the corona, ions above about 0.1 MeV/amu approach an equilibrium charge state that depends primarily upon their speed and only weakly on the plasma temperature. We suggest that the large variations of the charge states with energy for ions such as Si and Fe observed in the 1997 November 6 event are consistent with stripping in moderately dense coronal. plasma during shock acceleration. In the large solar-particle events studied previously, acceleration occurs sufficiently high in the corona that even Fe ions up to 600 MeV/amu are not stripped of electrons.

Reames, Donald V.↗

Atomic-level pseudo-degeneracy of atomic levels giving transitions induced by magnetic fields, of importance for determining the field strengths in the solar corona

We present a measured value for the degree of pseudo-degeneracy between two fine-structure levels in Fe{sup 9+} from line intensity ratios involving a transition induced by an external magnetic field. The extracted fine-structure energy difference between the 3p{sup 4}3d{sup 4}D{sub 5/2} and {sup 4}D{sub 7/2} levels, where the latter is the upper state for the magnetic-field induced line, is needed in our recently proposed method to measure magnetic-field strengths in the solar corona. The intensity of the 3p{sup 4}3d{sup 4}D{sub 7/2}→3p{sup 52}P{sub 3/2} line at 257.262 Å is sensitive to the magnetic field external to the ion. This sensitivity is in turn strongly dependent on the energy separation in the pseudo-degeneracy through the mixing induced by the external magnetic field. Our measurement, which uses an Electron Beam Ion Trap with a known magnetic-field strength, indicates that this energy difference is 3.5 cm{sup −1}. The high abundance of Fe{sup 9+} and the sensitivity of the line’s transition probability to field strengths below 0.1 T opens up the possibility of diagnosing coronal magnetic fields. We propose a new method to measure the magnetic field in the solar corona, from similar intensity ratios in Fe{sup 9+}. In addition, the proposed method to use the line ratio of the blended line 3p{sup 4}3d{sup 4}D{sub 7/2,5/2}→3p{sup 52}P{sub 3/2} with another line from Fe x as the density diagnostic should evaluate the effect of the magnetic-field-induced transition line.

79 ASTRONOMY AND ASTROPHYSICS↗

OSO-7 results on coronal emission near 304 A

The spectral composition and spatial distribution of equatorial coronal emission near 304 A is examined. Spectral scans indicate that the predominant line is from Si XI. Comparisons of observations with calculations of intensity changes with altitude indicate that collisional excitation is important near the sun but that photoexcitation becomes dominant beyond about 1.3 solar radii from the solar center. Observed and calculated intensities are in approximate agreement for abundances and electron densities that are within the range of observed values.

Nakada, M. P.↗

A magnetic cloud and a coronal mass ejection

An interplanetary magnetic cloud observed by the Helios 1 spacecraft was found to be associated with a coronal mass ejection observed by the NRL Solwind coronagraph on the spacecraft P78-1. The magnetic cloud was observed on June 20, 1980, when Helios 1 was at 0.54 AU and nearly 90 deg west of the earth-sun line. This was associated with a large loop-like coronal mass ejection observed over the west limb on June 18, 1980, moving toward Helios 1. The speed of the front of the event at Helios 1 was (470 + or - 10) km/s, which is close to the mean transit speed (approximately 500 km/s). The magnetic cloud was similar to others described in the literature: The magnetic field strength was higher than average; the density was relatively low; the magnetic pressure greatly exceeded the ion thermal pressure; and the magnetic field direction changed through the cloud by rotating parallel to a plane which was highly inclined with respect to the ecliptic.

Burlaga, L. F.↗

Direct coronal heating from dissipation of magnetic field

The visible corona of the Sun appears to be heated by direct dissipation of magnetic fields. The magnetic fields in the visible corona are tied at both ends to the photosphere where the active convection continually rotates and shuffles the footpoints in a random pattern. The twisting and wrapping of flux tubes about each other produce magnetic neutral sheets in a state of dynamical nonequilibrium such that the current sheets become increasingly concentrated with the passage of time. Dissipation of the high current densities takes place regardless of the high electrical conductivity of the fluid. The convection on the feet of the lines of force at the surface of the Sun goes directly (within a matter of 10 to 20 hours) into heat in the corona. The rate of doing work seems adequate to supply the necessary 10 to the 7th power ergs/square cm. sec for the active corona.

Parker, E. N.↗

A siphon mechanism for supplying prominence mass

A siphonlike mechanism for moving mass from the chromosphere to a gravitational well at the top of a magnetic loop to form a prominence is examined. The calculations assume no a priori flow velocity at the loop base. Instead, heating in the loop legs drives the flow. The prominence formation process requires two steps. First, the background heating rate must be reduced to on the order of 1 percent of the initial heating rate required to maintain the coronal loop. This forms an initial condensation at the top of the loop. Second, the heating must take place only in the loop legs in order to produce a pressure differential which drives mass up into the well at the top of the loop. The heating rate in the loop must be increased once the prominence has begun to form, or full prominence densities cannot be achieved in a reasonable time. It is concluded that this heating driven siphonlike mechanism is feasible for producing and maintaining prominences.

Poland, A. I.↗

Nature and Variability of Coronal Streamers and Their Relationship to the Slow Speed Wind

NASA Grant NAGS12781 is a study on the "Nature and Variability of Coronal Streamers and their Relationship to the Slow Speed Wind." The two main goals of this study are to identify: I ) Where in the streamer structure does the solar wind originate, and 2 ) What coronal conditions are responsible for the variability of the slow speed wind. These goals are to be accomplished by carrying out the following activities: I ) Developing models for inferring the plasma outflow velocities in the extended solar corona based on UV spectroscopic and white light coronagraph data. 2 ) Producing UVCS Carrington Maps for the period around solar minimum 1996-1998. 3) Producing electron density profiles from the corresponding LASCO-C2 observations. 4) Identifying and selecting in situ data sets to be used for characterizing the solar wind from the streamers observed with UVCS. 5) Developing new visualization tools for using the UVCS synoptic data.

Strachan, Leonard↗

THE SPECIFIC ACCELERATION RATE IN LOOP-STRUCTURED SOLAR FLARES-IMPLICATIONS FOR ELECTRON ACCELERATION MODELS

We analyze electron flux maps based on RHESSI hard X-ray imaging spectroscopy data for a number of extended coronal-loop flare events. For each event, we determine the variation of the characteristic loop length L with electron energy E, and we fit this observed behavior with models that incorporate an extended acceleration region and an exterior 'propagation' region, and which may include collisional modification of the accelerated electron spectrum inside the acceleration region. The models are characterized by two parameters: the plasma density n in, and the longitudinal extent L{sub 0} of, the acceleration region. Determination of the best-fit values of these parameters permits inference of the volume that encompasses the acceleration region and of the total number of particles within it. It is then straightforward to compute values for the emission filling factor and for the specific acceleration rate (electrons s{sup -1} per ambient electron above a chosen reference energy). For the 24 events studied, the range of inferred filling factors is consistent with a value of unity. The inferred mean value of the specific acceleration rate above E{sub 0} = 20 keV is {approx}10{sup -2} s{sup -1}, with a 1{sigma} spread of about a half-order-of-magnitude above and below this value. We compare these values with the predictions of several models, including acceleration by large-scale, weak (sub-Dreicer) fields, by strong (super-Dreicer) electric fields in a reconnecting current sheet, and by stochastic acceleration processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The interplanetary shock event of November 11/12 1978, a comprehensive test of acceleration theory

A comprehensive study of the November 11/12, 1978 shock event based on energetic particle, solar wind, magnetic field and wave data from the ISEE-3, -1 and -2 spacecraft has been undertaken both from the energetic and the collisionless shock point of view. The energy density of 10-50 keV protons accelerated by the shock is found to be equivalent to the upstream magnetic field energy density. The observations are in quantitative agreement with Lee's (1983) self consistent theory for the excitation of hydromagnetic waves and the acceleration of ions upstream of interplanetary shocks.

Wenzel, K. P.↗

Polarization of low-frequency electromagnetic radiation in the lobes of Jupiter's magnetotail

The plasma wave instruments on the Voyager spacecraft have detected intense electromagnetic radiation within the lobes of Jupiter's magnetic tail down to the lowest frequency of the detector (10 Hz). During a yaw maneuver performed by Voyager 1 in the lobe of the Jovian magnetotail, a modulation appeared in the amplitudes of waves detected in the 10-, 17.8- and 31.1-Hz channels of the plasma wave analyzer, well below the local electron cyclotron frequency of 260 Hz. The lowest amplitudes occurred when the antenna axis was most nearly parallel to the magnetic field. Wave amplitudes in the 56.2-Hz and higher frequency channels remained nearly constant during the maneuver. From the cold-plasma theory of electromagnetic waves, it is concluded that the plasma frequency was between the 56.2- and 31.1-Hz channels where the parallel-polarized component of the spectrum cuts off. This implies a tail-lobe density between 0.000032 and 0.000015/cu cm. The left-hand cutoff frequency would then be below 10 Hz, consistent with either the Z-mode (L, X) or whistlers (R-mode) in the modulated channels.

Moses, S. L.↗

SOLAR ENERGETIC-PARTICLE RELEASE TIMES IN HISTORIC GROUND-LEVEL EVENTS

Ground-level events (GLEs) are large solar energetic-particle events with sufficiently hard spectra for GeV protons to be detected by neutron monitors at ground level. For each of 30 well-observed historic GLEs from four solar cycles, extending back to 1973, I have plotted onset times versus velocity{sup -1} for particles observed on the IMP-7 and 8, ISEE-3, Wind, and GOES spacecraft and by neutron monitors. A linear fit on such a plot for each GLE determines the initial solar particle release (SPR) time, as the intercept, and the magnetic path length traversed, as the slope, of the fitted line. Magnetic path lengths and SPR times are well determined by the fits and cannot be used as adjustable parameters to make particle and photon emission times coincide. SPR times follow the onsets of shock-induced type II radio bursts and the coronal height of the coronal mass ejection (CME)-driven shock at SPR time can be determined for GLEs spanning an interval of solar longitude of approx140 deg. For a given GLE, all particle species and energies diverge from a single SPR point at a given coronal height and footpoint longitude of the field line to the Earth. These heights tend to increase with longitudinal distance away from the source, a pattern expected for shock acceleration. Acceleration for magnetically well-connected large GLEs begins at approx2 solar radii, in contrast to non-GLEs that have been found to be strongly associated with shocks above approx3 solar radii. The higher densities and magnetic field strengths at lower altitudes may be responsible for the acceleration of higher-energy particles in GLEs, while those GLEs that begin above 3R {sub S} may compensate by having higher shock speeds. These results support the joint dependence of maximum particle energy on magnetic field strength, injected particle density, and shock speed, all predicted theoretically.

79 ASTRONOMY AND ASTROPHYSICS↗