Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “containment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Synthesis of cobalt-containing mesoporous catalysts using the ultrasonic-assisted “pH-adjusting” method: Importance of cobalt species in styrene oxidation

Cobalt-containing SBA-15 and MCM-41 (Co-SBA-15 and Co-MCM-41) mesoporous catalysts were prepared via ultrasonic-assisted “pH-adjusting” technique in this study. Their physiochemical structures were comprehensively characterized and correlated with catalytic activity in oxidation of styrene. The nature of cobalt species depended on the type of mesoporous silica as well as pH values. The different catalytic performance between Co-SBA-15 and Co-MCM-41 catalysts originated from cobalt species. Cobalt species were homogenously incorporated into the siliceous framework of Co-SBA-15 in single-site Co(II) state, while Co{sub 3}O{sub 4} particles were loaded on Co-MCM-41 catalysts. The styrene oxidation tests showed that the single-site Co(II) state was more beneficial to the catalytic oxidation of styrene. The higher styrene conversion and benzaldehyde selectivity over Co-SBA-15 catalysts were mainly attributed to single-site Co(II) state incorporated into the framework of SBA-15. The highest conversion of styrene (34.7%) with benzaldehyde selectivity of 88.2% was obtained over Co-SBA-15 catalyst prepared at pH of 7.5, at the mole ratio of 1:1 (styrene to H{sub 2}O{sub 2}) at 70 °C. - Graphical abstract: Cobalt-containing mesoporous silica catalysts were developed via ultrasonic-assisted “pH-adjusting” technique. Compared with Co{sub 3}O{sub 4} in Co-MCM-41, the single-site Co(II) state in Co-SBA-15 was more efficient for the styrene oxidation. - Highlights: • Fast and cost-effective ultrasonic technique for preparing mesoporous materials. • Incorporation of Co via ultrasonic irradiation and “pH-adjusting”. • Physicochemical comparison between Co-SBA-15 and Co-MCM-41. • Correlation of styrene oxidation activity and catalyst structural property.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature-dependent polymorphism and magnetic properties of three-dimensional copper pyromellitate coordination polymers containing 4,4′-dipyridylamine

A pair of three-dimensional divalent copper pyromellitate (1,2,4,5-benzene-tetracarboxylate, pyro) coordination polymers containing 4,4′-dipyridylamine (dpa) was hydrothermally prepared and structurally characterized by single-crystal X-ray diffraction. The higher-temperature phase ([H{sub 2}dpa][Cu{sub 3}(pyro){sub 2}(H{sub 2}O){sub 3}]·2.5H{sub 2}O){sub n} (1) displays an acentric 3-D 4,4,6-connected anionic network with (4{sup 4}5.6)(5{sup 4}8{sup 2})(4{sup 4}5{sup 4}6{sup 3}7{sup 4}) topology, featuring (Cu{sub 2}(OCO){sub 4}) paddlewheel dimers and isolated copper ions. Charge-balancing H{sub 2}dpa cations are embedded in incipient voids. Prepared at lower temperature, ([Cu{sub 3}(pyro){sub 2}(dpa){sub 2}(dpaH){sub 2}]·3H{sub 2}O){sub n} (2) manifests a 3-D 4,4,4-connected neutral network with uncommon (4{sup 2}6{sup 4}){sub 4}(6{sup 4}8{sup 2}) frl topology based on (Cu{sub 3}(OCO){sub 2}) linear trimers. Antiferromagnetic coupling (J=–82(5) cm{sup –1}) was observed within the (Cu{sub 2}(OCO){sub 4}) dimeric units in 1, while weak ferromagnetic coupling (J=1.0(4) cm{sup –1}) was evident for the (Cu{sub 3}(OCO){sub 2}) linear trimers in 2. Thermal degradation behavior of these new materials is also presented. - Graphical abstract: Two copper pyromellitate coordination polymers containing 4,4′-dipyridylamine were prepared. The higher-temperature phase ([H{sub 2}dpa][Cu{sub 3}(pyro){sub 2}(H{sub 2}O){sub 3}]∙2.5H{sub 2}O){sub n} displays an acentric 3-D trinodal anionic network with (4{sup 4}5.6)(5{sup 4}8{sup 2})(4{sup 4}5{sup 4}6{sup 3}7{sup 4}) topology, featuring antiferromagnetically coupled (Cu{sub 2}(OCO){sub 4}) paddlewheel dimers and isolated copper ions. - Highlights: • Copper pyromellitate (pyro) coordination polymers with 4,4′-dipyridylamine (dpa). • Higher-temperature phase 1 has 3-D anionic trinodal network with H{sub 2}dpa cations. • Lower-temperature phase 2 has rare 3-D frl network. • Dimers and chains in 1 show antiferromagnetism, trimers in 2 show ferromagnetism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The cluster compound In{sub 4}Ti{sub 1.5}Mo{sub 0.5}Mo{sub 14}O{sub 26} containing Mo{sub 14} clusters and the new mono- and bi-capped trioctahedral Mo{sub 15} and Mo{sub 16} clusters: Synthesis, crystal structure, and electrical and magnetic properties

Single crystals of the new quaternary compound In{sub 4}Ti{sub 1.5}Mo{sub 0.5}Mo{sub 14}O{sub 26} were obtained by solid state reaction. The crystal structure was determined by single-crystal X-ray diffraction. In{sub 4}Ti{sub 1.5}Mo{sub 0.5}Mo{sub 14}O{sub 26} crystallizes in the orthorhombic space group Pbca with unit-cell parameters a=9.4432(14) Å, b=11.4828(12) Å, c=20.299(4) Å and Z=4. Full-matrix least-squares refinement on F{sup 2} using 3807 independent reflections for 219 refinable parameters resulted in R{sub 1}=0.0259 and wR{sub 2}=0.0591. The crystal structure contains in addition to Mo{sub 14} clusters the first examples of mono- and bi-capped trioctahedral Mo{sub 14} i.e. Mo{sub 15} and Mo{sub 16} clusters. The oxygen framework derives from a stacking along the a direction of close-packed layers with sequence (…ABAC…). The Mo–Mo distances range between 2.6938(5) and 2.8420(6) Å and the Mo–O distances between 1.879(5) and 2.250(3) Å, as usually observed in molybdenum oxide clusters. The indium atoms form In{sub 4}{sup 6+} bent chains with In–In distances of 2.6682(5) and 2.6622(8) Å and the Ti atoms are in highly distorted octahedral sites of oxygen atoms with Ti–O distances ranging between 1.865(4) and 2.161(4) Å. Magnetic susceptibility measurements confirm the presence of Ti{sup 4+} cations and the absence of localized moments on the Mo network. Electrical resistivity measurements on a single crystal of In{sub 4}Ti{sub 1.5}Mo{sub 0.5}Mo{sub 14}O{sub 26} show a semimetallic behavior. - Graphical abstract: We present here the synthesis, the crystal structure, and the electrical and magnetic properties of the new compound In{sub 4}Ti{sub 1.5}Mo{sub 0.5}Mo{sub 14}O{sub 26} in which Mo{sub 14} clusters coexist statistically with mono- and bi-capped trioctahedral Mo{sub 14} that is Mo{sub 15} and Mo{sub 16} clusters. - Highlights: • Single crystals of In{sub 4}Ti{sub 1.5}Mo{sub 0.5}Mo{sub 14}O{sub 26} were obtained by solid state reaction. • The crystal structure contains Mo{sub 14}, Mo{sub 15} and Mo{sub 16} clusters. • The indium atoms form In{sub 4}{sup 6+} bent chains. • Poorly metallic behavior. • Absence of localized moments on the Mo network as well as on the Ti atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and crystal structure of Ba{sub 26}B{sub 12}Si{sub 5}N{sub 27} containing [Si{sub 2}] dumbbells

Black, metallic luster, platelet single crystals of Ba{sub 26}B{sub 12}Si{sub 5}N{sub 27} were grown on a BN crucible wall by slowly cooling from 900 °C to 27 °C. X-ray diffraction analysis revealed that Ba{sub 26}B{sub 12}Si{sub 5}N{sub 27} crystallizes in an orthorhombic cell (a=17.6942(4) Å, b=34.1437(6) Å, c=10.0410(2) Å; space group Fdd2). Isolated nitridoborate anionic groups [BN{sub 2}]{sup 3–}, dumbbell-type Zintl polyanions [Si{sub 2}]{sup 2.8–}, and nitride anions N{sup 3–} are included in the structure. The structural formula is represented as (Ba{sup 2+}){sub 26}([BN{sub 2}]{sup 3–}){sub 12}[([Si{sub 2}]{sup 2.8–}){sub 1.25}(N{sup 3–}){sub 2×0.75}]{sub 2}. The [Si{sub 2}]{sup 2.8–} dumbbell with a Si–Si length of 2.177(5) Å has a bond order of 2.6, which is close to the triple bond of Si. - Graphical abstract: Single crystals of Ba{sub 26}B{sub 12}Si{sub 5}N{sub 27} grown by slow cooling from 900 °C have an orthorhombic crystal structure with space group Fdd2, containing nitridoborate anionic groups [BN{sub 2}]{sup 3–}, dumbbell-type Zintl polyanions [Si{sub 2}]{sup 2.8–}, and nitride anions N{sup 3–}. - Highlights: • A novel compound, Ba{sub 26}B{sub 12}Si{sub 5}N{sub 27}, was synthesized by slow cooling from 900 °C. • Single crystal X-ray diffraction clarified a new crystal structure. • Anionic groups [BN{sub 2}]{sup 3–} and dumbbell-type Zintl polyanions [Si{sub 2}]{sup 2.8–} are contained. • The [Si{sub 2}]{sup 2.8–} dumbbell has a bond order of 2.6, which is close to the triple bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hierarchical active factors to band gap and nonlinear optical response in Ag-containing quaternary-chalcogenide compounds

In this research work, Ag-containing quaternary-chalcogenide compounds KAg{sub 2}TS{sub 4} (T=P, Sb) (I-II) and RbAg{sub 2}SbS{sub 4} (III) have been studied by means of Density Functional Theory as potential IR nonlinear optical materials. The origin of wide band gap, different optical anisotropy and large SHG response is explained via a combination of density of states, electronic density difference and bond population analysis. It is indicated that the different covalent interaction behavior of P-S and Sb-S bonds dominates the band gap and birefringence. Specifically, the Ag-containing chalcogenide compound KAg{sub 2}PS{sub 4} possesses wide band gap and SHG response comparable with that of AgGaS{sub 2}. By exploring the origin of the band gap and NLO response for compounds KAg{sub 2}TS{sub 4} (T=P, Sb), we found the determination factor to the properties is different, especially the roles of Ag-d orbitals and bonding behavior of P-S or Sb-S. Thus, the compounds KAg{sub 2}TS{sub 4} (T=P, Sb) and RbAg{sub 2}SbS{sub 4} can be used in infrared (IR) region. - Graphical abstract: Metal thiophosphates RbPbPS{sub 4} and KSbP{sub 2}S{sub 6} have a similar band gap with KAg{sub 2}PS{sub 4}. However, based on first principles calculated results it shown that KAg{sub 2}PS{sub 4} possesses wide band gap (3.02 eV) and relatively large SHG response. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simple synthetic route to manganese-containing nanowires with the spinel crystal structure

This report describes a new route to synthesize single-crystalline manganese-containing spinel nanowires (NWs) by a two-step hydrothermal and solid-state synthesis. Interestingly, a nanowire or nanorod morphology is maintained during conversion from MnO{sub 2}/MnOOH to CuMn{sub 2}O{sub 4}/Mg{sub 2}MnO{sub 4}, despite the massive structural rearrangement this must involve. Linear sweep voltammetry (LSV) curves of the products give preliminary demonstration that CuMn{sub 2}O{sub 4} NWs are catalytically active towards the oxygen evolution reaction (OER) in alkaline solution, exhibiting five times the magnitude of current density found with pure carbon black. - Highlights: • Synthesis of single-crystalline manganese-containing spinel nanowires. • Binary oxide nanowire converted to ternary oxide wire through solid state reaction. • Approach to structure conversion with shape retention could be generally applicable. • Copper and Manganese display multiple oxidation states with potential for catalysis. • CuMn{sub 2}O{sub 4} nanowires show promise as catalysts for the oxygen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Keggin polyoxometalates based hybrid compounds containing helix/nanocages for colorimetric biosensing

Highlights: • Two new Keggin polyoxometalates (POMs) based hybrid compounds containing helix/nanocages are reported. • Compounds 1 and 2 both exhibit higher peroxidase-like activities and broader applications range than other POMs involved peroxidase-like mimics. • Compounds 1 and 2 both exhibit faster respond time and lower detection limit than other POMs involved peroxidase-like mimics. - Abstract: Two Keggin polyoxometalate (POMs) based hybrid compounds containing helix/nanocages as peroxidase-like mimics have been synthesized and structurally characterized. Single crystal X-ray diffraction analysis reveals that compound 1 exhibits a POM-pillared framework with open nanotube channels (ca. 5.6 × 5.8 Å{sup 2}), in which SiW{sub 12} polyanions are sandwiched between the adjacent Cu-fkz sheets with meso-helix. And an unprecedented twisted octahedral hexamer nanocage (ca. 10 × 10 Å{sup 2}) is observed in compound 2. Compared with the other POMs involved peroxidase-like mimics, both compounds 1 and 2 exhibit higher peroxidase-like catalytic activities, broader applications range, faster respond time and lower detection limit, which maybe attribute to the maximized synergistic effects of SiW{sub 12} clusters, fkz molecules, metal ions and the distinct structure. Based on the facts, compounds 1 and 2 as enzyme mimics might expand their application around physiological pH conditions, and can be used as one kind of effective probe to detect H{sub 2}O{sub 2} in live organism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase transformation and wear studies of plasma sprayed yttria stabilized zirconia coatings containing various mol% of yttria

Plasma sprayable grade zirconia powders doped with various mol% of yttria (0, 2, 3, 4, 6, 8 and 12 mol%) were synthesized by a chemical co-precipitation route. The coprecipitation conditions were adjusted such that the powders possessed good flowability in the as calcined condition and thus avoiding the agglomeration step like spray drying. Identical plasma spray parameters were used for plasma spraying all the powders on stainless steel plates. The powders and plasma sprayed coatings were characterized by X-ray diffractometry, Scanning Electron Microscopy and Raman spectroscopy. Zirconia powders are susceptible to phase transformations when subjected to very high temperatures during plasma spraying and XRD is insensitive to the presence of some non crystalline phases and hence Raman spectroscopy was used as an important tool. The microstructure of the plasma sprayed coatings showed a bimodal distribution containing fully melted and unmelted zones. The microhardness and wear resistance of the plasma sprayed coatings were determined. Among the plasma sprayed coatings, 3 mol% yttria stabilized zirconia coating containing pure tetragonal zirconia showed the highest wear resistance. - Research Highlights: {yields} Preparation plasma sprayable YSZ powders without any agglomeration process and plasma spraying {yields} Phase transformation studies of plasma sprayed YSZ coatings by XRD and Raman spectroscopy {yields} Microstructure of the plasma sprayed coatings exhibited bimodal distribution {yields} Plasma sprayed 3 mol% YSZ coating exhibited the highest wear resistance {yields} Higher wear resistance is due to the higher fracture toughness of tetragonal 3 mol% YSZ phase.

36 MATERIALS SCIENCE↗

Tribological properties of self-lubricating NiAl/Mo-based composites containing AgVO{sub 3} nanowires

Silver vanadate (AgVO{sub 3}) nanowires were synthesized by hydrothermal method and self-lubricating NiAl/Mo-AgVO{sub 3} composites were fabricated by powder metallurgy technique. The composition and microstructure of NiAl/Mo-based composites were characterized and the tribological properties were investigated from room temperature to 900 °C. The results showed that NiAl/Mo-based composites were consisted of nanocrystalline B2 ordered NiAl matrix, Al{sub 2}O{sub 3}, Mo{sub 2}C, metallic Ag and vanadium oxide phase. The appearance of metallic Ag and vanadium oxide phase can be attributed to the decomposition of AgVO{sub 3} during sintering. Wear testing results confirmed that NiAl/Mo-based composites have excellent tribological properties over a wide temperature range. For example, the friction coefficient and wear rate of NiAl/Mo-based composites containing AgVO{sub 3} were significantly lower than the composites containing only metallic Mo or AgVO{sub 3} lubricant when the temperature is above 300 °C, which can be attributed to the synergistic lubricating action of metallic Mo and AgVO{sub 3} lubricants. Furthermore, Raman results indicated that the composition on the worn surface of NiAl-based composites was self-adjusted after wear testing at different temperatures. For example, Ag{sub 3}VO{sub 4} and Fe{sub 3}O{sub 4} lubricants were responsible for the improvement of tribological properties at 500 °C, AgVO{sub 3}, Ag{sub 3}VO{sub 4} and molybdate for 700 °C, and AgVO{sub 3} and molybdate for 900 °C of NiAl-based composites with the addition of metallic Mo and AgVO{sub 3}. - Highlights: • NiAl/Mo-AgVO{sub 3} nanocomposites were prepared by mechanical alloying and sintering. • AgVO{sub 3} decomposed to metallic Ag and vanadium oxide during the sintering process. • NiAl/Mo-AgVO{sub 3} exhibited superior tribological properties at a board temperature range. • Phase composition on the worn surface was varied with temperatures. • Self-adjusted action was responsible for the improvement of tribological properties.

36 MATERIALS SCIENCE↗

Effects of Mg-Al-O-Mn-S inclusion on the nucleation of acicular ferrite in magnesium-containing low-carbon steel

Highlights: • We redefine the mechanism of AF nucleation from Gibbs free energy of nucleation. • Complex inclusions present a better ability of inducing AF formation due to the Mn-depleted zone. • The lattice misfit and the thermal strain are calculated in this study. - Abstract: The effects of inclusion size and chemical composition on acicular ferrite (AF) nucleation and possible nucleation mechanisms were discussed. With the use of low-carbon structure steel containing 13 ppm Mg, the chemical composition and size of inclusions were quantified by scanning electron microscopy combined with an energy dispersive spectroscopy system. Results showed that the complex inclusions MgO-MnS and MgO-Al{sub 2}O{sub 3}-MnS are the most effective inclusions for inducing AF nucleation in Mg-containing A36, and their probabilities of AF nucleation are 35.8% and 41.4%, respectively. Moreover, the inclusion size in the range of 1–2 μm exhibits the most remarkable ability to induce AF formation. AF nucleates at the interface of MgO and MgO-Al{sub 2}O{sub 3} because of the low lattice misfit with AF. Complex inclusions, such as MgO-MnS and MgO-Al{sub 2}O{sub 3}-MnS, present a better ability of inducing AF formation than that of MnS due to the Mn-depleted zone.

36 MATERIALS SCIENCE↗

Thermophysical properties of Ni-containing single-phase concentrated solid solution alloys

For this research temperature dependent thermophysical properties, including specific heat capacity, lattice thermal expansion, thermal diffusivity and conductivity, have been systematically studied in Ni and eight Ni-containing single-phase face-centered-cubic concentrated solid solution alloys, at elevated temperatures up to 1273 K. The alloys have similar specific heat values of 0.4–0.5 J·g -1 ·K -1 at room temperature, but their temperature dependence varies greatly due to Curie and K-state transitions. The lattice, electronic, and magnetic contributions to the specific heat have been separated based on first-principles methods in NiCo, NiFe, Ni-20Cr and NiCoFeCr. The alloys have similar thermal expansion behavior, with the exception that NiFe and NiCoFe have much lower thermal expansion coefficient in their ferromagnetic state due to magnetostriction effects. Calculations based on the quasi-harmonic approximation accurately predict the temperature dependent lattice parameter of NiCo and NiFe with < 0.2% error, but underestimated that of Ni-20Cr by 1%, compared to the values determined from neutron diffraction. In addition, all the alloys containing Cr have very similar thermal conductivity, which is much lower than that of Ni and the alloys without Cr, due to the large magnetic disorder.

36 MATERIALS SCIENCE↗

Thermal cycling-driven microstructural changes of eutectic Al–Si phase change materials in SS304 containers revealed by multi-modal imaging

Aluminum-based Al–Si alloys are widely used as phase change materials (PCMs) in thermal energy storage (TES) systems owing to their high volumetric latent heat and superior thermal conductivity. However, their long-term reliability is limited by degradation processes that remain insufficiently understood. In this work, we employ a multimodal, correlative characterization framework to systematically resolve the degradation behavior of eutectic Al–Si PCMs in contact with SS304 containers under repeated thermal cycling. By integrating high-resolution electron microscopy, three-dimensional X-ray fluorescence (3D XRF) imaging, and differential scanning calorimetry (DSC), we directly link spatially resolved compositional and microstructural evolution to changes in thermophysical properties. The correlative analysis reveals that elemental leaching of Fe, Cr, and Ni from the stainless-steel container into the PCM drives the formation of intermetallic compounds (IMCs) both at the interface and within the bulk PCM, leading to pronounced compositional heterogeneity. These interfacial reactions and diffusion-induced transformations progressively destabilize the Al–Si eutectic, reducing the effective phase-transforming fraction. Consistent with these observations, DSC measurements show a decrease in melting temperature and latent heat of fusion with thermal cycling. These results underscore the critical influence of interfacial reactions and material compatibility on the stability, durability, and overall performance of Al–Si-based TES systems.

25 ENERGY STORAGE↗

Low-temperature sintering behavior of nanocrystalline indium tin oxide prepared from polymer-containing sols

Highlights: Black-Right-Pointing-Pointer The synthesis of ITO powders and thin films from PVP-containing sols is presented. Black-Right-Pointing-Pointer The nano- and microstructures of ITO are more compact when PVP is used. Black-Right-Pointing-Pointer PVP acts both as a steric stabilizer of the sol and as a pre-sintering agent. Black-Right-Pointing-Pointer The PVP-induced enhanced sintering results in ITO with lower electrical resistance. Black-Right-Pointing-Pointer The surface composition of the ITO films is independent of the initial PVP content. -- Abstract: Indium tin hydroxide (ITH) xerogel powders and thin films with different polyvinylpyrrolidone (PVP) contents (0-22%, w/w) were prepared by a classical sol-gel method. To obtain nanocrystalline indium tin oxide (ITO), the ITH xerogels were calcined at 550 Degree-Sign C. The effect of the initial polymer content on the structure of the ITO powders was studied by means of N{sub 2}-sorption measurements, small-angle X-ray scattering (SAXS), transmission and scanning electron microscopy. The N{sub 2}-sorption measurements revealed that the ITO powders obtained contained micropores and both their porosity and specific surface area decreased with increasing PVP content of the ITH xerogels. The SAXS measurements confirmed the enhanced sintering of the particles in the presence of PVP. The calculated mass fractal dimensions of the ITO powders increased significantly, indicating a significant compaction in structure. The pre-sintered structure could be achieved at relatively low temperature, which induced a significant decreasing (three orders of magnitude) in the electrical resistance of the ITO films.

36 MATERIALS SCIENCE↗

Photocatalytic activity of glass ceramics containing Nasicon-type crystals

Graphical abstract: Display Omitted Highlights: ► Glass ceramics containing Nasicon-type crystals were prepared. ► The glass ceramics showed photocatalytic activity under UV irradiation. ► Higher activity was observed in the MgTi{sub 4}(PO{sub 4}){sub 6}- and CaTi{sub 4}(PO{sub 4}){sub 6}-containing glass ceramics. -- Abstract: Glass ceramics were prepared by heat-treating MO–TiO{sub 2}–P{sub 2}O{sub 5} (M = Mg, Ca, Sr and Ba) and R{sub 2}O–TiO{sub 2}–P{sub 2}O{sub 5}–SiO{sub 2} (R = Li, Na and K) glasses, and their photocatalytic activity was investigated. The crystalline phases precipitated in the glasses were only Nasicon-type crystals, MTi{sub 4}(PO{sub 4}){sub 6} or RTi{sub 2}(PO{sub 4}){sub 3}. Decomposition experiments of both methylene blue (MB) and acetaldehyde showed that the glass ceramics exhibited effective photocatalytic activity. The activity did not depend on the radius of the M{sup 2+} or R{sup +} ion, and higher activity was observed in the MgTi{sub 4}(PO{sub 4}){sub 6} and CaTi{sub 4}(PO{sub 4}){sub 6} precipitated glass ceramics.

36 MATERIALS SCIENCE↗

Comparisons of short carbon nanotubes containing conductive additives of cathode for lithium ion batteries

Graphical abstract: - Highlights: • Short carbon nanotubes (SCNT) containing conductive additives were used. • SCNT/graphite powder (GP) mixture is better than SCNT/mesoporous carbon mixture. • SCNT connect many isolated GP particles to form a more valid conductive network. • SCNT absorb some electrolyte solution allowing quick electrochemical reactions. - Abstract: Short carbon nanotubes (SCNT) containing conductive additives, i.e. SCNT/graphite powder (GP) mixture (SCNTGP) and SCNT/mesoporous carbon (MC) mixture (SCNTMC) were employed as conductive additives for LiCoO{sub 2} cathode. GP and MC have similar particle size, but GP has lower specific surface area and higher electronic conductivity. Electrochemical measurements indicate that SCNTGP is more effective in improving the electrochemical performance of LiCoO{sub 2} composite cathode under the same conditions. The reason is described as follows. SCNT connect the isolated GP particles to form a more valid conductive network. In addition, SCNT has a certain specific mesoporous surface area, which can absorb some electrolyte solution and then provide buffer lithium ions for quick electrochemical reactions. Consequently, the combination of these two factors would be responsible to the improvement in the electrochemical performance of the SCNTGP loaded cathode.

36 MATERIALS SCIENCE↗

Optical properties of transparent glass–ceramics containing lithium–mica nanocrystals: Crystallization effect

Graphical abstract: Optical properties of transparent Li{sub 2}O–MgO–Al{sub 2}O{sub 3}–SiO{sub 2}–F glasses containing lithium–mica nanocrystals are studied and crystallization condition has been evaluated and optimized to produce transparent glass–ceramics. Crystallization temperatures were determined by differential thermal analysis and crystalline phases were identified and quantified by X-ray diffraction. Scanning electron microscopy was used for morphological variations and UV–vis absorption spectroscopy for comparative analysis of transparency. In order to investigate the optical properties of transparent glass–ceramics, optical band gap, Fermi energy level and Urbach energy are calculated. The results of the investigation illustrate that band gap is reduced with increases in crystallization time and temperature. Enhanced orderliness in the arrangement of atoms might be regarded as possible reasons for the above changes. - Highlights: • The optimum temperature and time of crystallization were determined. • Li–mica nanocrystals with size of <30 nm were formed using a two-step heat-treatment. • Optical band gap and Fermi energy of nanocrystalline materials decreased with increasing of crystallization temperature and time. • Urbach band tailing was decreased with increasing of crystallization condition. - Abstract: Optical properties of transparent Li{sub 2}O–MgO–Al{sub 2}O{sub 3}–SiO{sub 2}–F glasses containing lithium–mica nanocrystals were studied. The crystallization condition of these glasses was evaluated and optimized to produce transparent glass–ceramics. Crystallization temperatures were determined by differential thermal analysis and crystalline phases were identified and quantified by X-ray diffraction. Scanning electron microscopy was used to detect morphological changes and UV–vis absorption spectroscopy was used for comparative analysis of transparency. In order to investigate the optical properties of the transparent glass–ceramics, optical band gap, Fermi energy level and Urbach energy were calculated. The results of the investigation illustrate that the band gap is reduced with increases in crystallization time and temperature. Enhanced orderliness in the arrangement of atoms might be regarded as possible reasons for the above changes.

36 MATERIALS SCIENCE↗

Controllable synthesis and tunable luminescence of glass ceramic containing Mn{sup 2+}:ZnAl{sub 2}O{sub 4} and Pr{sup 3+}:YF{sub 3} nano-crystals

Highlights: • Glass ceramic containing ZnAl{sub 2}O{sub 4} and YF{sub 3} nano-crystals is fabricated. • Mn{sup 2+} and Pr{sup 3+} are selectively incorporated into ZnAl{sub 2}O{sub 4} and YF{sub 3}, respectively. • The luminescence color can be tuned by adjusting the excitation wavelength. - Abstract: Glass ceramic containing spinel ZnAl{sub 2}O{sub 4}:Mn{sup 2+} and orthorhombic YF{sub 3}:Pr{sup 3+} nano-crystals has been successfully prepared by a melt-quenching technique. X-ray diffraction and transmission electron microscopy demonstrated that two nano-phases, i.e. ZnAl{sub 2}O{sub 4} and YF{sub 3}, were homogeneously distributed among the glass matrix. Importantly, the selective incorporation of Pr{sup 3+} ions into the Y{sup 3+} nine-fold coordinated sites of YF{sub 3} and the segregation of Mn{sup 2+} dopants in the Zn{sup 2+} tetrahedral sites of ZnAl{sub 2}O{sub 4} were confirmed based on the excitation/emission spectra and the crystal field calculation. Under blue light excitation, both Pr{sup 3+} and Mn{sup 2+} in the glass ceramic can be simultaneously excited, and emit red and green luminescence, respectively, owing to the suppression of energy transfer between them. The luminescence color of the obtained glass ceramic can be easily tuned by adjusting the excitation wavelength. These results indicate the potential application of the glass ceramic as converting phosphor to generate white-light after coupling with the blue LED chip.

36 MATERIALS SCIENCE↗

Biogas reforming over Ni catalysts dispersed in different mixed oxides containing Zn2+, Al3+ and Zr4+cations

Highlights: • The oxides mixture containing NiO, ZnO, Al{sub 2}O{sub 3}, NiAl{sub 2}O{sub 4} and ZnAl{sub 2}O{sub 4} was detected. • The results exhibited intermediate interactions between Ni0 and other phases. • Dry reforming of methane was applied to production of synthesis gas. • Deposition of the carbon filamentous on the catalysts surface was observed. - Abstract: The active phase plays an important role in the catalytic activity. However, its applicability is directly associated with other present phases in the mixture. In view of this, we report the performance of Ni catalysts dispersed on mixed oxides containing Zn{sup 2+}, Al{sup 3+} and Zr{sup 4+}cations in biogas reforming. For this purpose, the samples were characterized by X-ray powder diffraction, which showed the formation of a homogeneous mixture of binary (NiO, ZnO, ZrO{sub 2} and Al{sub 2}O{sub 3}) and ternary (NiAl{sub 2}O{sub 4} and ZnAl{sub 2}O{sub 4}) oxides. The temperature-programmed reduction (H{sub 2}-TPR) provided information on the catalyst reduction. The performance of the catalysts was evaluated using two reduction temperatures (650 °C and 750 °C). The reactions were carried out at 750 °C, where the Ni/ZnAlZr catalyst presented the highest CO{sub 2} conversion attributed to the basic sites, which favored the CO{sub 2} adsorption. Otherwise, the Ni/ZnZr catalyst (reduced at 650 °C) showed a high CH{sub 4} conversion. The catalysts were also reduced at 750 °C and a lower conversion of both reactants (CH{sub 4} and CO{sub 2}) was observed. We argued that the agglomeration process during the reduction condition deteriorates the performance of the catalysts reduced at 750 °C.

09 BIOMASS FUELS↗