Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “component isolation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Artificial neural network application for space station power system fault diagnosis

This study presents a methodology for fault diagnosis using a Two-Stage Artificial Neural Network Clustering Algorithm. Previously, SPICE models of a 5-bus DC power distribution system with assumed constant output power during contingencies from the DDCU were used to evaluate the ANN's fault diagnosis capabilities. This on-going study uses EMTP models of the components (distribution lines, SPDU, TPDU, loads) and power sources (DDCU) of Space Station Alpha's electrical Power Distribution System as a basis for the ANN fault diagnostic tool. The results from the two studies are contrasted. In the event of a major fault, ground controllers need the ability to identify the type of fault, isolate the fault to the orbital replaceable unit level and provide the necessary information for the power management expert system to optimally determine a degraded-mode load schedule. To accomplish these goals, the electrical power distribution system's architecture can be subdivided into three major classes: DC-DC converter to loads, DC Switching Unit (DCSU) to Main bus Switching Unit (MBSU), and Power Sources to DCSU. Each class which has its own electrical characteristics and operations, requires a unique fault analysis philosophy. This study identifies these philosophies as Riddles 1, 2 and 3 respectively. The results of the on-going study addresses Riddle-1. It is concluded in this study that the combination of the EMTP models of the DDCU, distribution cables and electrical loads yields a more accurate model of the behavior and in addition yielded more accurate fault diagnosis using ANN versus the results obtained with the SPICE models.

Momoh, James A.↗
NASA NTRS2012

Ka-Band Waveguide Three-Way Serial Combiner for MMIC Amplifiers

In this innovation, the three-way combiner consists internally of two branch-line hybrids that are connected in series by a short length of waveguide. Each branch-line hybrid is designed to combine input signals that are in phase with an amplitude ratio of two. The combiner is constructed in an E-plane split-block arrangement and is precision machined from blocks of aluminum with standard WR-28 waveguide ports. The port impedances of the combiner are matched to that of a standard WR-28 waveguide. The component parts include the power combiner and the MMIC (monolithic microwave integrated circuit) power amplifiers (PAs). The three-way series power combiner is a six-port device. For basic operation, power that enters ports 3, 5, and 6 is combined in phase and appears at port 1. Ports 2 and 4 are isolated ports. The application of the three-way combiner for combining three PAs with unequal output powers was demonstrated. NASA requires narrow-band solid-state power amplifiers (SSPAs) at Ka-band frequencies with output power in the range of 3 to 5 W for radio or gravity science experiments. In addition, NASA also requires wideband, high-efficiency SSPAs at Ka-band frequencies with output power in the range of 5 to 15 W for high-data-rate communications from deep space to Earth. The three-way power combiner is designed to operate over the frequency band of 31.8 to 32.3 GHz, which is NASA s deep-space frequency band.

Wintucky, Edwin G.↗
DOE OSTI2022

The Transcription Factor Roc1 Is a Key Regulator of Cellulose Degradation in the Wood-Decaying Mushroom Schizophyllum commune

Wood-decaying fungi of the class Agaricomycetes (phylum Basidiomycota) are saprotrophs that break down lignocellulose and play an important role in nutrient recycling. They secrete a wide range of extracellular plant cell wall degrading enzymes that break down cellulose, hemicellulose, and lignin, the main building blocks of plant biomass. Although the production of these enzymes is regulated mainly at the transcriptional level, no activating regulators have been identified in any wood-decaying fungus in the class Agaricomycetes. We studied the regulation of cellulase expression in the wood-decaying fungus Schizophyllum commune. Comparative genomics and transcriptomics on two wild isolates revealed a Zn 2 Cys 6 -type transcription factor gene (roc1) that was highly upregulated during growth on cellulose, compared to glucose. It is only conserved in the class Agaricomycetes. A roc1 knockout strain showed an inability to grow on medium with cellulose as sole carbon source, and growth on cellobiose and xylan (other components of wood) was inhibited. Growth on non-wood-related carbon sources was not inhibited. Cellulase gene expression and enzyme activity were reduced in the Δroc1 strain. ChIP-Seq identified 1474 binding sites of the Roc1 transcription factor. Promoters of genes involved in lignocellulose degradation were enriched with these binding sites, especially those of LPMO (lytic polysaccharide monooxygenase) CAZymes, indicating that Roc1 directly regulates these genes. A conserved motif was identified as the binding site of Roc1, which was confirmed by a functional promoter analysis. Together, Roc1 is a key regulator of cellulose degradation and the first identified in wood-decaying fungi in the phylum Basidiomycota.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Machine Learning-Based Anomaly Detection for PMT Data Quality Monitoring in the SBN and DUNE

Maintaining high-quality detector data is essential for achieving the scientific objectives of the Short-Baseline Neutrino (SBN) Program at Fermilab. Current data quality monitoring (DQM) procedures rely primarily on threshold-based metrics and manual inspection of detector monitoring plots, making the detection of subtle or gradually developing anomalies both time-consuming and dependent on expert interpretation. This project developed and evaluated a machine-learning workflow for automatically identifying anomalous photomultiplier tube (PMT) channels in the Short-Baseline Near Detector (SBND) using optical-hit amplitude data. A Python-based analysis program was developed to process ROOT files, extract statistical features describing individual PMT amplitude distributions, and generate feature vectors for anomaly detection. These features were used to train an Isolation Forest model using data representing normal detector operation. The trained model was subsequently applied to independent detector runs to identify channels exhibiting statistically unusual behavior relative to the learned reference response. To support expert interpretation, the workflow generated complementary diagnostic products, including anomaly score distributions, normalized amplitude comparisons, decision-tree visualizations, and principal component analysis (PCA) projections. This project demonstrated the feasibility of integrating unsupervised machine learning into detector data-quality monitoring and developed a complete workflow for automated PMT performance assessment to aid expert-driven review. Beyond its technical contributions, the VFP appointment fostered a research collaboration between Aurora University and Fermilab and provided direct workforce development benefits by training the visiting faculty member in detector-scale machine-learning methods that are now being incorporated into undergraduate coursework and research. The methodology developed here provides a foundation for future applications to ProtoDUNE and other liquid argon time projection chamber (LArTPC) detectors, contributing to ongoing efforts to improve detector reliability, reduce manual monitoring requirements, and enable scalable data quality monitoring for future large-scale neutrino experiments, including the Deep Underground Neutrino Experiment (DUNE).

Colón Santana, Juan A. [Unlisted, US, IL]↗
NASA NTRS1978

Twisted and warped disks as consequences of heavy halos

Observationally testable consequences of the hypothesis that galactic disks are confined less by their self-gravity than that of some hot stellar component are sought. Theoretical and observational studies are reviewed which suggest that elliptical galaxies are typically triaxial in form. It is argued that any hot stellar component is likely to be similarly spherical. The motion of a galactic disk about such a population is calculated. Within the plane the flow is to first order along similar concentric ellipses and without of the plane, provided that certain conditions on the background field are met, an oscillation may be excited which can cause isolated galaxies to become warped. The circular motion of matter in such disks will manifest itself in the misalignment of the apparent minor axis and the H I zero-velocity contour. Such an effect may be present in a number of recent H I surveys, although the data presently available do not allow definite conclusions. Alternative explanations of galactic warps are reviewed and their relation to the present proposal discussed.

Binney, J.↗
NASA NTRS1991

An infrared/optical investigation of 100 micron 'cirrus'

IRAS Skyflux images, in conjunction with ESO/SRC photographic plates, are presently used to study a sample of 151 compact cyrrus sources. IR colors entail at least two dust components; a simple two-temperature dust model yields a mean physical temperature of 22.5 + or - 0.3 K for the warm dust, and 173 + or - 8 K for the hot dust, which constitutes 15-42 percent of total IR luminosity. A variable proportion of cold dust may contribute significantly to the optical brightness in two isolated cloud complexes.

Paley, Elizabeth S.↗
NASA NTRS1993

Microbiological test results of the environmental control and life support systems vapors compression distillation subsystem recycle tank components following various pretreatment protocols

Microbiological samples were collected from the recycle tank of the vapor compression distillation (VCD) subsystem of the water recovery test at NASA MSFC following a 68-day run. The recycle tank collects rejected urine brine that was pretreated with a commercially available oxidant (Oxone) and sulfuric acid and pumps it back to the processing component of the VCD. Samples collected included a water sample and two swab samples, one from the particulate filter surface and a second from material floating on the surface of the water. No bacteria were recovered from the water sample. Both swab samples contained a spore-forming bacterium, Bacillus insolitus. A filamentous fungus was isolated from the floating material. Approximately 1 month after the pretreatment chemicals were changed to sodium hypochlorite and sulfuric acid, a swab of the particulate filter was again analyzed for microbial content. One fungus was isolated, and spore-forming bacteria were observed. These results indicate the inability of these pretreatments to inhibit surface attachment. The implications of the presence of these organisms are discussed.

Huff, Tim↗
NASA NTRS1995

ROSAT observations of the Eridanus soft X-ray enhancement

We present maps of the Eridanus soft X-ray enhancement made from the ROSAT all-sky survey data. The maps are in two energy bands: 0.25 keV (0.12-0.284 keV at 10% response, the ROSAT R1 and R2 bands), and 0.75 keV (0.47-1.20 keV at 10% response, the ROSAT R4 and R5 bands). The entire enhancement spans a total of approximately 35 deg in Galactic latitude and approximately 20 deg in Galactic longitude, centered at l approximately 22 deg, b approximately -32 deg. While the higher spatial resolution of the ROSAT data reveals a pattern of detailed anticorrelations with 100 micrometers intensity that was not evident in the HEAO 1 or earlier data, the basic morphology found in previous maps of this enhancement is confirmed. The ROSAT data also clearly show that the X-ray enhancement continues up to the Orion region in the 0.75 keV band, confirming the structure suggested by the Wisconsin sky survey maps. The ROSAT data are consistent with the interpretation of Reynolds & Ogden and Burrows et al. that this enhancement, the higher temperature component of Burrows et al., is generated for the most part by several-million-degree gas filling a huge interstellar cavity. However, we interpret the low-temperature component discussed by Burrows et al. as part of a more distant large scale (greater than or equal to approximately 30 deg) diffuse background enhancement. The part of this softer X-ray enhancement examined here appears to be produced by million degree gas in the galactic halo, and is therfore unlikely to be an isolated bubble as suggested by Burrows et al. on the basis of lower resolution HEAO 1 data.

Snowden, S. L.↗
NASA NTRS1996

From Stardust to Planetesimals: Contributed Papers

On June 24 through 26, 1996, a scientific conference entitled From Stardust to Planetesimals was held at the Westin Hotel, Santa Clara, California, as part of the 108th annual meeting of the Astronomical Society of the Pacific. Over the last decade, our understanding of the formation and early evolution of the solar system has advanced considerably due to progress that has been made simultaneously on many fronts. Stardust has been isolated in meteorites and interplanetary dust particles (IDP's), providing us with sample materials which predate the solar system and which offer clues to the processing that has occurred. At the same time, infrared studies have led to a better characterization of the composition of interstellar dust, which is now readily accepted as an important component of the interstellar medium infrared observations have also provided a much better view of the star-formation process and the role of dust therein. Recently, the presence of Kuiper Belt planetesimals has been confirmed and spectroscopy of these rather pristine objects may soon become available. Analysis of spacecraft data from the Comet Halley flybys has yielded a wealth of information on the composition of this comet. These observational advances have changed our understanding of planetesimal processing. The launch of the Infrared Space Observatory, the opening of 10-meter class telescopes, and, in the longer term, the Rosetta mission, promise to continue to broaden and deepen our understanding of the evolution from stardust to planetesimals. For these reasons we considered it timely to organize a meeting focused on the processes that connect stardust and planetesimals. The goal of this meeting was, therefore, to bring together astronomers interested in star- and planet-formation, planetary scientists studying early solar system relics, laboratory scientists studying the processing of analogs, and scientists analyzing meteorites and interplanetary dust particles, grain by grain. As a result of this endeavor, over 200 participants, including 153 scientists from 14 different countries, gathered to discuss the origin and evolution of stardust. We hope that this encounter in Santa Clara will foster an ongoing interchange of information and ideas within this diverse group of scientists. A major aim of this meeting was to produce conference proceedings which reflect the current situation regarding the evolution from stardust to planetesimals.

Kress, M. E.↗
NASA NTRS2005

Atmospheric Electron-induced X-Ray Spectrometer (AEXS) Instrument Development

Instrument Development: The membrane properties were investigated in detail due to its critical role. A series of experiments determined that our designed membranes have high electron transmission, yet are capable of isolating high vacuum, are able to withstand differential pressure in excess of one atmosphere, survive vibrational shocks of a magnitude to be expected during a planetary mission. Our initial work has been with a 10 keV source and a 200 nm thick Silicon Nitride (SiN) encapsulation membrane micro-fabricated within a Si support frame (1.5 mm x 1.5 mm window openings. Fig 2 compares the spectra taken with the 10 keV source with spectra taken within SEM. Introduction: This paper describes the progress in the development of the AEXS instrument in our laboratory at JPL. The AEXS is a novel miniature instrument[1-3] based on the excitation of characteristic X-Ray Fluorescence (XRF) and luminescence spectra using a focused electron beam, for non-destructive evaluation of surfaces of samples in planetary ambient atmosphere. In situ operation is obtained through the use of a thin electron transmissive membrane to isolate the vacuum within the AEXS electron source from the outside ambient atmosphere. The impinging electrons excite XRF spectra from the irradiated spots on samples in external atmosphere with high-to-medium (sub-mm to cm-scale) spatial resolution at Mars atmospheric pressure. The XRF spectra are analyzed using an energy-dispersive detector to determine surface elemental composition, or in the case of electron-induced luminescence to identify unusual formations on surface that cathodo-luminescence (CL). The AEXS system (Fig 1) consists of a high-energy (>10keV) electron gun encapsulated by the isolation membrane, an EDX detection and analyzer system to determine the elemental abundance, an optional CL detection system, and a high voltage power supply. The approach to demonstrating a proof of concept of the AEXS has been through 1) demonstrating the viability of micro-fabricated membranes, 2) assembling AEXS setups with increasingly integrated functional components, and 3) simulating the AEXS observational capabilities. This paper will focus on description of the development of the instrument.

Wilcox, J. Z.↗
NASA NTRS2000

Mechanically Induced g-Jitter from Space Station Rotary Joints

The mission of the International Space Station is to provide a working laboratory in orbit for research in engineering, life sciences, and microgravity. Among the microgravity disciplines that are preparing to utilize this international resource are materials processing, combustion, fluid dynamics, biotechnology, and fundamental physics. The Station promises to enable significant advances in each of these areas by making available a research facility in which gravitational and other accelerations, and their corresponding buoyancy and diffusion effects on various physical processes, are orders of magnitude lower than they are on Earth. In order to fulfill this promise, it is not enough for the Space Station to simply replicate a typical terrestrial scientific laboratory in orbit. Although an orbiting laboratory is free of most of the effects of gravitational acceleration by virtue of its free fall condition, it also produces structural vibration or jitter that can interfere with the processes under study. To ensure the quality of the acceleration environment and enable a successful mission, the Space Station Program has limited potential disturbances in two ways: first, by isolating the most sensitive payloads from the vehicle structure, and second, by quieting major disturbances at their sources. The first area, payload isolation, is implemented inside the pressurized modules at the rack level. Sub-rack level isolators have also been developed. This paper addresses the second area, disturbance source limits, for one of the major sources of mechanical noise on the Space Station: the Solar Alpha Rotary Joints. Due to the potential for large disturbances to the microgravity environment, an initial analytical prediction of rotary joint vibration output was made. Key components were identified and tested to validate the analytical predictions. Based on the component test results, the final vibration output of the joints was verified by a test on each fully assembled flight unit. This paper describes the Space Station microgravity requirements, the rotary joint hardware, and the disturbance producing aspects of joint operation. The test setup, instrumentation, test conditions, and results for the component level and system level measurements are described. An overall forcing function that describes the maximum torque imparted to the Station is created based on the test results, and these disturbances are shown to meet the applicable Space Station microgravity requirements.

Boucher, Robert L.↗
NASA NTRS2011

Radiated Emissions from a Remote-Controlled Airplane-Measured in a Reverberation Chamber

A full-vehicle, subscale all-electric model airplane was tested for radiated emissions, using a reverberation chamber. The mission of the NASA model airplane is to test in-flight airframe damage diagnosis and battery prognosis algorithms, and provide experimental data for other aviation safety research. Subscale model airplanes are economical experimental tools, but assembling their systems from hobbyist and low-cost components may lead to unforseen electromagnetic compatibility problems. This report provides a guide for accommodating the on-board radio systems, so that all model airplane systems may be operated during radiated emission testing. Radiated emission data are provided for on-board systems being operated separately and together, so that potential interferors can be isolated and mitigated. The report concludes with recommendations for EMI/EMC best practices for subscale model airplanes and airships used for research.

Ely, Jay J.↗
NASA NTRS2014

IXPE: The Imaging X-ray Polarimetry Explorer, Implementing a Dedicated Polarimetry Mission

Only a few experiments have conducted x-ray polarimetry of cosmic sources since Weisskopf et al confirmed the 19% polarization of the Crab Nebula with the Orbiting Solar Observatory (OSO-8) in the 70's center dot The challenge is to measure a faint polarized component against a background of non-polarized signal (as well as the other, typical background components) center dot Typically, for a few % minimum detectable polarization, 106 photons are required. center dot So, a dedicated mission is vital with instruments that are designed specifically to measure polarization (with minimal systematic effects) Over the proposed mission life (2- 3 years), IXPE will first survey representative samples of several categories of targets: magnetars, isolated pulsars, pulsar wind nebula and supernova remnants, microquasars, active galaxies etc. The survey results will guide detailed follow-up observations. Precise calibration of IXPE is vital to ensuring sensitivity goals are met. The detectors will be characterized in Italy, and then a full calibration of the complete instrument will be performed at MSFC's stray light facility. Polarized flux at different energies Heritage: X-ray Optics at MSFC polarimetry mission.

Ramsey, Brian↗
DOE OSTI2025

Bacterial and fungal growth on fungal necromass and its diverse components: Shared profiles and divergent constraints revealed by high‐throughput phenotyping

1. While fungal necromass is increasingly recognized as a major source of persistent carbon (C) in soils, the relative functional roles of bacteria and fungi in decomposing necromass are not fully resolved, and the processes that select for necromass decomposer communities from the broader soil microbial community are an emerging area of interest. 2. In this study, we characterized the growth of 52 bacterial and 83 fungal strains isolated from necromass and soil on 22 C substrates, including different necromass phenotypes, fungal cell wall polymers, dimers and monomers. 3. We found that the isolation habitat of the strains used in this experiment (necromass vs. soil) had no effect on the substrates they were able to use. Isolates from both microbial domains were able to grow on different labile carbon substrates, polymers and necromass phenotypes. However, fungal growth was most limited by necromass melanin content, while bacterial growth was more limited by the abundance of cell wall polysaccharides. Additionally, overall differences in substrate use between bacteria and fungi were most pronounced on polymer substrates. 4. Collectively, our results suggest that there is substantial functional overlap in necromass substrate use across microbial domains, but some notable differences in bacterial and fungal utilization of cell wall polymers, which can function as a direct energy source or a means of accessing other compounds within necromass. Future studies assessing bacteria and fungi decomposing necromass together rather than in isolation will help to uncover potential physical and chemical interactions within and between these two domains during the decay of this important source of persistent soil C.

dead fungal biomass↗
DOE OSTI2026

Dissecting the contributions to non-photochemical quenching in a land plant under fluctuating light

Photosynthetic organisms have evolved multiple non-photochemical quenching (NPQ) processes, providing photoprotection by safely dissipating excess excitation energy. These processes involve various molecular players functioning on overlapping timescales from seconds to days, making it challenging to isolate and quantify their individual kinetics. In this study, we perform whole-leaf chlorophyll fluorescence lifetime and xanthophyll concentration measurements on wild-type and various newly characterized NPQ mutants of Nicotiana benthamiana, a vascular land plant. Based on these measurements, we construct a fluorescence lifetime-based quantitative kinetic model that disentangles individual photoprotection components and, when integrated additively, accurately predicts wild-type and mutant NPQ behaviors under various light-dark regimes. Additionally, the model quantifies the per-molecule quenching effectiveness of various xanthophylls and the contributions of six quenching components (qE V , qE A , qE Z , qE L , qZ, and qI) across different genotypes. It also suggests improved overall quenching efficiency at specific VDE:ZEP:PsbS overexpression stoichiometries, aligning with previous studies and supporting translational efforts to optimize photoprotection and enhance crop yields under dynamic light environments.

Lam, Lam [University of California, Berkeley, CA (↗
DOE OSTI2022

Neptunium (V) Solubility in the Presence and Absence of WIPP Relevant Ligands

CRA (Compliance Recertification Application)-2024 will update the oxidation state specific model used to calculate actinide solubility in the WIPP (Waste Isolation Pilot Plant). The pentavalent Np(V) ion is the most stable ion in solution within the An(V) series. This valence stability of Np(V) in aqueous solution makes Np a useful representative element for studying the aqueous complex chemistry of all An(V), but in the predicted WIPP scenario, this is the only TRU component that increases in the inventory with time as it is the main daughter product of 241 Am decay (alpha, n) so its relative importance increases throughout the 10,000-year performance period of the WIPP, it is only used to represent itself. This work is focused on confirming organic, borate and carbonate effects on solubility of Np(V) in WIPP simulated brines and 5 M NaCl and reassessing the predicted model speciation to strengthen the overall WIPP An(V) model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Combustion of petroleum-based transportation fuels and their blends with biofuels: a new approach for developing surrogates and understanding the effects of blending

Accurate and versatile reaction mechanisms are necessary to simulate combustion of transportation fuels blended with biofuels for improving fuel efficiency, reducing fuel consumption and mitigating the formation and emissions of combustion products harmful to the atmosphere. This project involved a combined effort of simulation and experimentation of liquid fuel burning using a combustion configuration amenable to numerical modeling with a level of detail not previously achieved for blends of biofuels with gasoline certification and surrogate fuels. The configuration of an isolated droplet burning under conditions where gas transport arises solely from fuel evaporation was selected as the platform for experiments and numerical modeling. The spherical symmetry and one-dimensional gas transport that results enabled simulating the droplet burning process with an precedented level of detail. Processes associated with unsteady gas and liquid transport, formation of particulate and gaseous products, radiation, multicomponent phase equilibrium at the droplet surface and moving boundary effects from droplet evaporation, were incorporated in a single numerical framework. The numerical model was based on the open source code OPENSmoke++ (OS) adapted to incorporate the effects noted above. In addition to simulation, an experimental design was developed for the isolated droplet configuration to acquire the data needed for validating the numerical model. Several broad accomplishments of the project were the following: demonstrating generally excellent agreement between measured and simulated combustion parameters for the fuel blends examined that included mixtures of heptane and isobutanol as a model system, and surrogates comprised of up to seven miscible components mixed with ethanol or isobutanol as representative biofuel additives; using a new approach to validate reaction mechanisms of biofuel blends which incorporated fuel evaporation into the process along with developing an experimental design for acquiring data to compare with simulations; and showing that a wealth of information could be obtained on the combustion physics of biofuels from experiments requiring volumes on the order of only nanoliters at a time thus opening the way to evaluating biofuels synthesized by new processes early in development.

02 PETROLEUM↗
NASA NTRS1994

Passive Vibration Isolator For Experiments

Passive isolator reduces natural vibrational frequency of platform to less than 1 Hz - well below frequencies of vibration induced by human activity. Biological, crystal-growth, and other experiments mounted on platform protected against disturbances by technicians working in vicinity. Designed for use in microgravitational environment of spacecraft. Modified version designed for use on Earth by including components counteracting steady normal Earth gravitation. Consumes no electrical power, simple, and inexpensive.

Naumann, Robert J.↗