Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud boundaries”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Retrieved Number concentration of Cloud Condensation Nuclei (RNCCN) Value-Added Product (VAP)

The objective of Retrieved Number concentration of Cloud Condensation Nuclei (RNCCN) Value-Added Product (VAP) is to provide the vertical distribution of cloud condensation nuclei (CCN) number concentrations to better represent aerosol indirect effects in climate models. The RNCCN VAP allows to collect a large number of independent samples of vertical CCN measurements at various supersaturation values from the ground. This helps to avoid the high cost of aircraft and increases the temporal distribution of retrieved CCN in the planetary boundary layer. The VAP method is based on Ghan and Collins (2004) and Ghan et al. (2006) proposed parameterizations that retrieve the vertical profiles of CCN directly from the ground level CCN, humidification factor, and in-situ lidar measurements. Further, the VAP accuracy is improved by using the quality controlled data that ensures that the boundary layer is well mixed.

54 ENVIRONMENTAL SCIENCES↗

Factors controlling marine aerosol size distributions and their climate effects over the northwest Atlantic Ocean region

Abstract. Aerosols over Earth's remote and spatially extensive ocean surfaces have important influences on planetary climate. However, these aerosols and their effects remain poorly understood, in part due to the remoteness and limited observations over these regions. In this study, we seek to understand factors that shape marine aerosol size distributions and composition in the northwest Atlantic Ocean region. We use the GEOS-Chem model with the TwO-Moment Aerosol Sectional (TOMAS) microphysics algorithm model to interpret measurements collected from ship and aircraft during the four seasonal campaigns of the North Atlantic Aerosols and Marine Ecosystems Study (NAAMES) conducted between 2015 and 2018. Observations from the NAAMES campaigns show enhancements in the campaign-median number of aerosols with diameters larger than 3 nm in the lower troposphere (below 6 km), most pronounced during the phytoplankton bloom maxima (May/June) below 2 km in the free troposphere. Our simulations, combined with NAAMES ship and aircraft measurements, suggest several key factors that contribute to aerosol number and size in the northwest Atlantic lower troposphere, with significant regional-mean (40–60∘ N and 20–50∘ W) cloud-albedo aerosol indirect effect (AIE) and direct radiative effect (DRE) processes during the phytoplankton bloom. These key factors and their associated simulated radiative effects in the region include the following: (1) particle formation near and above the marine boundary layer (MBL) top (AIE: −3.37 W m−2, DRE: −0.62 W m−2); (2) particle growth due to marine secondary organic aerosol (MSOA) as the nascent particles subside into the MBL, enabling them to become cloud-condensation-nuclei-sized particles (AIE: −2.27 W m−2, DRE: −0.10 W m−2); (3) particle formation and growth due to the products of dimethyl sulfide, above and within the MBL (−1.29 W m−2, DRE: −0.06 W m−2); (4) ship emissions (AIE: −0.62 W m−2, DRE: −0.05 W m−2); and (5) primary sea spray emissions (AIE: +0.04 W m−2, DRE: −0.79 W m−2). Our results suggest that a synergy of particle formation in the lower troposphere (particularly near and above the MBL top) and growth by MSOA contributes strongly to cloud-condensation-nuclei-sized particles with significant regional radiative effects in the northwest Atlantic. To gain confidence in radiative effect magnitudes, future work is needed to understand (1) the sources and temperature dependence of condensable marine vapors forming MSOA, (2) primary sea spray emissions, and (3) the species that can form new particles in the lower troposphere and grow these particles as they descend into the marine boundary layer.

54 ENVIRONMENTAL SCIENCES↗

A Study of the Response of Deep Tropical Clouds to Mesoscale Processes: Sensitivities to Microphysics, Radiation, and Surface Fluxes - Part 2

The Goddard Cumulus Ensemble (GCE) model is used to examine the sensitivities of surface fluxes, explicit radiation, and ice microphysical processes on multi-day simulations of deep tropical convection over the Tropical Ocean Global Atmosphere Coupled Ocean-Atmosphere Response Experiment (TOGA COARE). The simulations incorporate large-scale advective temperature and moisture forcing, as well as large-scale momentum, that are updated every time step on a periodic lateral boundary grid. This study shows that when surface fluxes are eliminated, the mean atmosphere is much cooler and drier, convection and CAPE are much weaker, precipitation is less, and cloud coverage in stratiform regions much greater. Surface fluxes using the TOGA COARE flux algorithm are weaker than with the aerodynamic formulation, but closer to the observed fluxes. In addition, similar trends noted above for the case without surface fluxes are produced for the TOGA flux case, albeit to a much lesser extent. The elimination of explicit shortwave and longwave radiation is found to have only minimal effects on the mean thermodynamics, convection, and precipitation. However explicit radiation does have a significant impact on cloud temperatures and structure above 200 mb and on the overall mean vertical circulation. The removal of ice processes produces major changes in the structure of the cloud. Much of the liquid water is transported aloft and into anvils above the melting layer (600 mb), leaving narrow, but intense bands of rainfall in convective regions. The elimination of melting processes leads to greater hydrometeor mass below the melting layer, and produces a much warmer and moister boundary layer, leading to a greater mean CAPE. Finally, the elimination of the graupel species has only a small impact on mean total precipitation, thermodynamics, and dynamics of the simulation, but does produce much greater snow mass just above the melting layer. Some of these results differ from previous CRM studies of tropical systems, which is likely due to the type of simulated system, total time integration, and model setup.

Johnson, Daniel↗

Observed Variability in Convective Cell Characteristics and Near-Storm Environments across the Sea- and Bay-Breeze Fronts in Southeast Texas

Abstract During the DOE Atmospheric Radiation Measurement (ARM) Tracking Aerosol Convection Interactions Experiment (TRACER) IOP spanning June–September 2022, two fixed ARM sites and a mobile team concurrently sampled the airmass heterogeneity across sea- and bay-breeze fronts around the greater Houston metropolitan region. Here, we quantify the spatiotemporal variability between maritime (coastal/bay side of breeze fronts) and continental (inland side of breeze fronts) air masses over 15 IOP days characterized by strong sea-breeze forcing. We analyze environmental profile data from 177 radiosondes and use S- and C-band radar data to track and quantify the variability in attributes of more than 2300 shallow and transitioning cells across different air masses. The composite analysis of environmental profiles indicates that during the early afternoon, the sea-breeze maritime air mass exhibits lower convective available potential energy (CAPE) than the bay-breeze maritime air mass. As the sea breeze advances inland with time, CAPE within the maritime air mass exceeds that of the continental air mass to the north of the breeze fronts. In general, maritime cells have a larger mean composite reflectivity and cell widths than continental cells; however, the response varies between shallow and transitioning cells. Mean composite 20-dB Z echo-top heights, however, are similar across air masses for both shallow and transitioning cells. The continental and maritime inflow air mass for transitioning cells has significantly different mean values for mixed-layer entrainment CAPE, lifted condensation level, level of free condensation, boundary layer depth, and diluted equilibrium level. For shallow cells, only total precipitable water shows a significant difference. Significance Statement The greater Houston metropolitan area is a natural laboratory for understanding the individual impacts of background meteorology and aerosols on convective clouds. Due to its proximity to the Gulf Coast and Galveston Bay, the Houston region experiences a diurnal precipitation cycle in the summer, driven by convection triggered from sea- and bay-breeze fronts. These fronts act as a boundary between air masses with distinct thermodynamic and environmental characteristics. Convergence along these fronts and interactions between storm outflow and the fronts facilitate convection initiation in different mesoscale air masses. This study quantifies the heterogeneity among these air masses while investigating their influence on cloud microphysics. We find that the effect of airmass heterogeneity is more pronounced for the bulk microphysical properties in shallow clouds.

Sharma, Milind↗

Growth of accretion driven scalar hair around Kerr black holes

We report that Scalar fields around compact objects are of interest for scalar-tensor theories of gravity and dark matter models consisting of a massive scalar, e.g., axions. We study the behavior of a scalar field around a Kerr black hole with nontrivial asymptotic boundary conditions - both nonzero density and nonzero angular momentum. Starting from an initial radially homogeneous configuration, a scalar cloud is accreted, which asymptotes to known stationary configurations over time. We study the cloud growth for different parameters including black hole spin, scalar field mass, and the scalar field density and angular momentum far from the black hole. We characterize the transient growth of the mass and angular momentum in the cloud, and the spatial profile of the scalar around the black hole, and relate the results of fully nonlinear simulations to an analytic perturbative expansion. We also highlight the potential for these accreted clouds to create monochromatic gravitational wave signals - similar to the signals from superradiant clouds, although significantly weaker in amplitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

TRACER Radar b1 Data Processing: Corrections, Calibrations, and Processing Report

The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility deployed the first ARM Mobile Facility (AMF1) to Houston, Texas for the Tracking Aerosol Convection Interactions Experiment (TRACER) field campaign. The TRACER campaign was conducted from October 1, 2021 to September 30, 2022, with an intensive operational period (IOP) from June 1 to September 30, 2022. To investigate the life cycles of convective cells in the polluted and humid urban environment of Houston, ARM deployed cloud and precipitation radars, including the C-band Scanning ARM Precipitation Radar (CSAPR2), the X/Ka-band Scanning ARM Cloud Radar (SACR), and the Ka-band ARM Zenith cloud Radar (KAZR), as shown in Figure 1. This report presents an analysis of radar data quality, hardware calibrations, and radar data corrections.

54 ENVIRONMENTAL SCIENCES↗

Conditional instability of the first kind upside-down

It is shown that entrainment leads to the generation of turbulence kinetic energy in a stratocumulus layer when the virtual temperature jump at the cloud top is weaker than a critical value. The critical value increases as the relative humidity of the air above the cloud top decreases. This result is interpreted as a criterion for the instability of the layer cloud to penetrative downdrafts. The role of the instability in determining the subtropical and tropical distributions of boundary-layer cloudiness is assessed.

Randall, D. A.↗

Sea breeze-induced mesoscale systems and severe weather

The relationship between thunderstorm activity during the summer months along coastal regions of the Atlantic and Gulf coasts and the dry sea breeze circulation was investigated. Satellite composites of thunderstorm activity for synoptically undisturbed conditions have been obtained for south Florida for a series of days in the summer of 1983. These data were catalogued into different low level synoptic flow regimes. Five synoptic flow regimes were found from the data. A three-dimensional mesoscale numerical model was used for each sysnoptic flow regime to quantitatively predict the location of enhanced thunderstorm activity. This model includes a parameterization of vegetation and soil moisture feedbacks as well as a sophisticated planetary boundary layer representation. Using the results of the satellite image composites, spatial and temporal characteristics of deep convective cloud patterns and their variation with synoptic flow are described. The results from the numerical model have provided explanations for the observed patterns.

Pielke, R. A.↗

Mesoscale spiral vortex embedded within a Lake Michigan snow squall band - High resolution satellite observations and numerical model simulations

It is known that Great Lakes snow squall convection occurs in a variety of different modes depending on various factors such as air-water temperature contrast, boundary-layer wind shear, and geostrophic wind direction. An exceptional and often neglected source of data for mesoscale cloud studies is the ultrahigh resolution multispectral data produced by Landsat satellites. On October 19, 1972, a clearly defined spiral vortex was noted in a Landsat-1 image near the southern end of Lake Michigan during an exceptionally early cold air outbreak over a still very warm lake. In a numerical simulation using a three-dimensional Eulerian hydrostatic primitive equation mesoscale model with an initially uniform wind field, a definite analog to the observed vortex was generated. This suggests that intense surface heating can be a principal cause in the development of a low-level mesoscale vortex.

Lyons, Walter A.↗

Compressible turbulent flows: Modeling and similarity considerations

With the recent revitalization of high speed flow research, compressibility presents a new set of challenging problems to turbulence researchers. Questions arise as to what extent compressibility affects turbulence dynamics, structures, the Reynolds stress-mean velocity (constitutive) relation, and the accompanying processes of heat transfer and mixing. In astrophysical applications, compressible turbulence is believed to play an important role in intergalactic gas cloud dynamics and in accretion disk convection. Understanding and modeling of the compressibility effects in free shear flows, boundary layers, and boundary layer/shock interactions is discussed.

Zeman, Otto↗

Strategies for Improved CALIPSO Aerosol Optical Depth Estimates

In the spring of 2010, the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) project will be releasing version 3 of its level 2 data products. In this paper we describe several changes to the algorithms and code that yield substantial improvements in CALIPSO's retrieval of aerosol optical depths (AOD). Among these are a retooled cloud-clearing procedure and a new approach to determining the base altitudes of aerosol layers in the planetary boundary layer (PBL). The results derived from these modifications are illustrated using case studies prepared using a late beta version of the level 2 version 3 processing code.

Vaughan, Mark A.↗

Detection and Height Measurement of Tenuous Clouds and Blowing Snow in ICESat-2 ATLAS Data

Tenuous atmospheric layers, such as high, thin cirrus clouds and blowing snow over Antarctica, play an important role in the climate system, affecting energy fluxes between the Earth and the atmosphere. Our knowledge of the structure of the atmosphere is largely derived from atmospheric satellite measurements. Yet tenuous layers can be hard to detect in satellite lidar data, especially in daylight data characterized by high solar background. In this study, we introduce an approach to detect tenuous atmospheric layers in the atmospheric lidar measurements of NASA's ICESat-2. The density-dimension algorithm for ICESat-2 atmospheric data (DDA-atmos) identifies atmospheric layers while automatically adapting to different background conditions of night, twilight, and daylight data. This capability, demonstrated for tenuous clouds and blowing snow, offers a data-based solution to an important climate modeling problem. Atmospheric layer boundaries, detection confidence, and density fields resultant from the DDA-atmos are reported in ICESat-2 atmospheric data product ATL09.

Ute Herzfeld↗

Active Raman sounding of the earth's water vapor field

The typically weak cross-sections characteristic of Raman processes has historically limited their use in atmospheric remote sensing to nighttime application. However, with advances in instrumentation and techniques, it is now possible to apply Raman lidar to the monitoring of atmospheric water vapor, aerosols and clouds throughout the diurnal cycle. Upper tropospheric and lower stratospheric measurements of water vapor using Raman lidar are also possible but are limited to nighttime and require long integration times. However, boundary layer studies of water vapor variability can now be performed with high temporal and spatial resolution. This paper will review the current state-of-the-art of Raman lidar for high-resolution measurements of the atmospheric water vapor, aerosol and cloud fields. In particular, we describe the use of Raman lidar for mapping the vertical distribution and variability of atmospheric water vapor, aerosols and clouds throughout the evolution of dynamic meteorological events. The ability of Raman lidar to detect and characterize water in the region of the tropopause and the importance of high-altitude water vapor for climate-related studies and meteorological satellite performance are discussed.

Earth (Planet)↗

Improving the representation of shallow cumulus convection with the simplified-higher-order-closure–mass-flux (SHOC+MF v1.0) approach

Abstract. Parameterized boundary layer turbulence and moist convection remain some of the largest sources of uncertainty in general circulation models. High-resolution climate modeling aims to reduce that uncertainty by explicitly attempting to resolve deep moist convective motions. An example of such a model is the Simple Cloud-Resolving E3SM Atmosphere Model (SCREAM) with a target global resolution of 3.25 km, allowing for a more accurate representation of complex mesoscale deep convective dynamics. Yet, small-scale planetary boundary layer turbulence and shallow convection still need to be parameterized, which in SCREAM is accomplished through the turbulent-kinetic-energy-based (TKE-based) simplified higher-order closure (SHOC) – a simplified version of the assumed-double-Gaussian-PDF (probability density function) higher-order-closure method. In this paper, we implement a stochastic-multiplume mass-flux (MF) parameterization of dry and shallow convection in SCREAM to go beyond the limitations of double-Gaussian-PDF closures and couple it to SHOC (SHOC+MF). The new parameterization implemented in a single-column model type version of SCREAM produces results for two shallow cumulus convection cases (marine and continental shallow convection) that agree well with the reference data from large-eddy simulations, thus improving the general representation of the thermodynamic quantities and their turbulent fluxes as well as cloud macrophysics in the model. Furthermore, SHOC+MF parameterization shows weak sensitivity to the vertical grid resolution and model time step.

54 ENVIRONMENTAL SCIENCES↗

Thermodynamic structure of the stratocumulus-capped boundary layer on 5 July 1987

The National Center for Atmospheric Research (NCAR) Electra flew a single aircraft mission on July 5 in comparatively uniform stratocumulus cloud (80 to 100 percent cloud coverage). The flight pattern, a series of north-south doglegs centered at (32N, -122W), included 15 full or partial soundings to examine layer vertical structure between altitudes of 150 and 5000 m. The air below the inversion was well-mixed in moist static energy, total water, and ozone. The inversion base measured by the aircraft ranged from 920 to 938 hPa, while the thickness of the cloud layer varied between 30 and 10 hPa. Maximum cloud liquid water contents approached 0.3 g kg(-1) (as measured by the Johnson-Williams and King probes). Comparison of soundings made in the same location show a strengthening of the inversion and increasing shear at cloud top over the observation period (16:50 to 00:22 UT). Typical windspeeds below the inversion were approximately 10 m s(-1) decreasing to 6 m s(-1) 8 hPa above cloud top. A thermodynamic budget for this case is in preparation; it will provide a comparison and contrast with the more complicated July 7 case.

Austin, Philip H.↗

A New Technique for the Retrieval of Near Surface Water Vapor Using DIAL Measurements

Water vapor is one of the most important atmospheric trace gas species and influences radiation, climate, cloud formation, surface evaporation, precipitation, storm development, transport, dynamics, and chemistry. For improvements in NWP (numerical weather prediction) and climate studies, global water vapor measurements with higher accuracy and vertical resolution are needed than are currently available. Current satellite sensors are challenged to characterize the content and distribution of water vapor in the Boundary Layer (BL) and particularly near the first few hundred meters above the surface within the BL. These measurements are critically needed to infer surface evaporation rates in cloud formation and climate studies. The NASA Langley Research Center Lidar Atmospheric Sensing Experiment (LASE) system, which uses the Differential Absorption Lidar (DIAL) technique, has demonstrated the capability to provide high quality water vapor measurements in the BL and across the troposphere. A new retrieval technique is investigated to extend these DIAL water vapor measurements to the surface. This method uses signals from both atmospheric backscattering and the strong surface returns (even over low reflectivity oceanic surfaces) using multiple gain channels to cover the large signal dynamic range. Measurements can be made between broken clouds and in presence of optically thin cirrus. Examples of LASE measurements from a variety of conditions encountered during NASA hurricane field experiments over the Atlantic Ocean are presented. Comparisons of retrieved water vapor profiles from LASE near the surface with dropsonde measurements show very good agreement. This presentation also includes a discussion of the feasibility of developing space-based DIAL capability for high resolution water vapor measurements in the BL and above and an assessment of the technology needed for developing this capability.

Ismail, Syed↗

Tracing the green valley with entropic thresholding

ABSTRACT The green valley represents the population of galaxies that are transitioning from the actively star-forming blue cloud to the passively evolving red sequence. Studying the properties of the green valley galaxies is crucial for our understanding of the exact mechanisms and processes that drive this transition. The green valley does not have a universally accepted definition. The boundaries of the green valley are often determined by empirical lines that are subjective and vary across studies. We present an unambiguous definition of the green valley in the colour–stellar mass plane using the entropic thresholding. We first divide the galaxy population into the blue cloud and the red sequence based on a colour threshold that minimizes the intraclass variance and maximizes the interclass variance. Our method splits the region between the mean colours of the blue cloud and the red sequence into three parts by maximizing the total entropy of that region. We repeat our analysis in a number of independent stellar mass bins to define the boundaries of the green valley in the colour–mass diagram. Our method provides a robust and natural definition of the green valley.

Pandey, Biswajit (ORCID:000000017876595X)↗

Giovanni in the Cloud: Earth Science Data Exploration in Amazon Web Services

Giovanni is an exploration tool at the NASA Goddard Earth Sciences Data Information Services Center (GES DISC), providing 22 analysis and visualization services for over 1600 Earth Science data variables. Owing to its popularity, Giovanni has experienced a consistent growth in overall demand, with periodic usage spikes attributed to trainings by education organizations, extensive data analysis in response to natural disasters, preparations for science meetings, etc. Furthermore, the new generation of spaceborne sensors and high resolution models have resulted in an exponential growth in data volume with data distributed across the traditional boundaries of data centers. Seamless exploration of data (without users having to worry about data center boundaries) has been a key recommendation of the GES DISC User Working Group. These factors have required new strategies for delivering acceptable performance. The cloud-based Giovanni, built on Amazon Web Services (AWS), evaluates (1) AWS native solutions to provide a scalable, serverless architecture; (2) open standards for data storage in the Cloud; (3) a cost model for operations; and (4) end-user performance. Our preliminary findings indicate that the use of serverless architecture has a potential to significantly reduce development and operational cost of Giovanni. The combination of using AWS managed services, storage of data in open standards, and schema-on-read data access strategy simplifies data access and analytics, in addition to making data more accessible to the end users of Giovanni through popular programming languages.

Giovanni↗