Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “chaos”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Low temperature hydrogen superpermeation in vanadium composite metal foil pumps

Palladium-based foil membranes are an effective option for hydrogen isotope recovery from the plasma exhaust of future fusion plants, but cost and availability are concerns. Vanadium (V) is a relatively low cost, neutron tolerant material with high hydrogen permeability. It has been well-studied as a superpermeable membrane at high temperature (>500 °C), but V displays negligible superpermeation at low temperature (75–200 °C) due to catalytic limitations. Composite membranes were fabricated by depositing thin layers (~100 nm) of either Pd or BCC PdCu on sputter-cleaned vanadium foils (100 μm). Symmetric membranes elevated superpermeation to levels approaching bulk Pd or PdCu foils, with ~5X higher flux in the latter reflecting the superior properties of PdCu. Asymmetric membranes revealed that the Pd-based catalyst layer was critical for both efficient absorption of superthermal hydrogen upstream as well as catalyzing re-combinative desorption downstream. At T ≥ 150 °C composite membrane superpermeation was equivalent to the Pd-based foils, but the flux was attenuated by a factor of 2-3X as the temperature was reduced. This deviation from pure foil performance coincided with the formation of vanadium hydride (β-V 2 H), which also impacted the transient response. Nevertheless, no embrittlement was observed under the conditions examined and elevating the temperature >150 °C removed the hydride and restored full performance. The achievement of palladium-level performance with a >99% reduction in Pd inventory makes these V composite metal foils pumps an attractive option for low temperature hydrogen isotope recovery in future fusion plants.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Development and preliminary validation of a mechanistic multiscale model for fuel-cladding chemical interaction in metallic nuclear fuels

Despite decades of fuel rod material and design improvements, fuel-cladding chemical interaction (FCCI) remains the single-most lifetime-limiting behavior for modern metallic fuel rods. Constraining fuel lifetime increases operating costs, limiting the economic viability of commercializing metallic nuclear fuel technology. A mechanistic multiscale model utilizing the finite element method-based MARMOT and BISON codes was developed to more confidently predict cladding-side FCCI and its impact on fuel performance. The new BISON model incorporates mesoscale models for the effects of fuel microstructure evolution on the transport of wastage-inducing lanthanides through the fuel and for the kinetics of cladding wastage layer growth. The mesoscale models, in turn, build on lanthanide transport property data obtained from the atomistic scale. Preliminary validation studies using wastage thickness and cladding profilometry data from four fuel rods irradiated in Experimental Breeder Reactor II experiment X447 and one fuel rod from Fast Flux Test Facility experiment IFR1 show that the new model predicts cladding wastage and its effects on cladding deformation as well as existing empirical FCCI correlations. The new model is expected to aid in the design of new metallic fuel concepts, including fuel additives, cladding liners, and sodium-free annular fuel geometries. In conclusion, future work will focus on broader validation and refinement of the model’s treatment of different fuel alloys and cladding materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Transport of intensity equation: a tutorial

When it comes to “phase measurement” or “quantitative phase imaging”, many people will automatically connect them with “laser” and “interferometry”. Indeed, conventional quantitative phase imaging and phase measurement techniques generally rely on the superposition of two beams with a high degree of coherence: complex interferometric configurations, stringent requirements on the environmental stabilities, and associated laser speckle noise severely limit their applications in optical imaging and microscopy. On a different note, as one of the most well-known phase retrieval approaches, the transport of intensity equation (TIE) provides a new non-interferometric way to access quantitative phase information through intensity only measurement. Despite the insufficiency for interferometry, TIE is applicable under partially coherent illuminations (like the Köhler’s illumination in a conventional microscope), permitting optimum spatial resolution, higher signal-to-noise ratio, and better image quality. In this tutorial, we give an overview of the basic principle, research fields, and representative applications of TIE, focus particularly on optical imaging, metrology, and microscopy. The purpose of this tutorial is twofold. It should serve as a self-contained introduction to TIE for readers with little or no knowledge of TIE. On the other hand, it attempts to give an overview of recent developments in this field. These results highlight a new era in which strict coherence and interferometry are no longer prerequisites for quantitative phase imaging and diffraction tomography, paving the way toward new generation label-free three-dimensional microscopy, with applications in all branches of biomedicine.

42 ENGINEERING↗
DOE OSTI2021

Corrigendum to “Transport of intensity equation: A tutorial” Optics and Lasers in Engineering, Volume 135 (2020) 106187

In this Corrigendum, we correct misprints in equations and figures of the article titled “Transport of intensity equation: a tutorial” Optics and Lasers in Engineering, 135, 106187, 2020.1 These misprints were caused by unanticipated issues in email communication between the authors and the editorial team during the proofreading stage. The authors would like to apologize for any inconvenience caused.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Collimated phase measuring deflectometry

Phase measuring deflectometry has been applied for free-form specular surface metrology, but its measured slope results are sensitive to the depth of sample positioning, which is also called the height-slope ambiguity. The objective of this work is to tackle this height-slope ambiguity problem. The main idea is to introduce collimated camera rays using a telecentric imaging lens and collimated structured-light illumination with a Fourier lens. This setup makes the fringe phases become only sensitive to the surface slopes and insensitive to the depth of the sample positioning. In this way, the slope calculation is theoretically independent of the sample depth. We call this new deflectometry technique Collimated Phase Measuring Deflectometry (CPMD). With our developed CPMD experimental setup, the measurement is insensitive to the depth of sample positioning, e.g., the measured height dispersion is less than 30 nm RMS within a 10 mm depth range when measuring a 50-mm-diameter spherical mirror with a 200 mm radius of curvature. In conclusion, the merits and limitations of the proposed CPMD technique are discussed, revealing its prospects in practical metrology applications and potential future investigations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A 3D nonfullerene electron acceptor with a 9,9'-bicarbazole backbone for high-efficiency organic solar cells

One-dimensional ladder-type nonfullerene electron acceptors (NFAs) with large fused ring cores have been typically used in highly efficient organic solar cells (OSCs). Prior studies have demonstrated that small molecule acceptors with three-dimensional (3D) structures may exhibit low energy loss, and hence can lead to improved OSC performance. In this study, a new 3D NFA ( 99CZ-8F ) with a 9,9'-bicarbazole backbone was designed, synthesized, and characterized, where two linear A-D-A architectures were linked by a single N–N bond. 99CZ-8F showed strong absorption in the range of 500–800 nm in the solid state, which is complementary to the absorption of the donor material PM6 . After regulating the morphology of the active layer via binary solvent mixture, the optimized device exhibited a maximum power conversion efficiency (PCE) of 6.6 ± 0.1%, which is among the best reported values for 3D nonfullerene electron acceptor based OSCs

14 SOLAR ENERGY↗
DOE OSTI2021

Achieving performance portability in Gaussian basis set density functional theory on accelerator based architectures in NWChemEx

The numerical integration of the exchange–correlation (XC) potential is one of the primary computational bottlenecks in Gaussian basis set Kohn–Sham density functional theory (KS-DFT). To achieve optimal performance and accuracy, care must be taken in this numerical integration to preserve local sparsity as to allow for near linear weak scaling with system size. This leads to an integration scheme with several performance critical kernels which must be hand optimized for each architecture of interest. As the set of available accelerator hardware goes more diverse, a key challenge for developers of KS-DFT software is to maintain performance portability across a wide range of computational architectures. In this article, we examine a modular software design pattern which decouples the implementation details of performance critical kernels from the expression of high-level algorithmic workflows in a device-agnostic language such as C++; thus allowing for developers to target existing and emerging accelerator hardware within a single code base. We consider the efficacy of such a design pattern in the numerical integration of the XC potential by demonstrating its ability to achieve performance portability across a set of accelerator architectures which are representative of those on current and future U.S. Department of Energy Leadership Computing Facilities.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

The divergence of nearby trajectories in soft-sphere DEM

The n-body instability is investigated with the soft-sphere discrete element method. The divergence of nearby trajectories is quantified by the dynamical memory time. Using the inverse proportionality between the dynamical memory time and the largest Lyapunov exponent, the soft-sphere discrete element method results are compared to previous hard-sphere molecular dynamics data for the first time. Good agreement is observed at low concentrations and the degree of instability is shown to increase asymptotically with increasing spring stiffness. At particle concentrations above 30%, the soft-sphere Lyapunov exponents increase faster than the corresponding hard-sphere data. Finally, this paper concludes with a demonstration of how this case study may be used in conjunction with regression testing and code verification activities.

42 ENGINEERING↗
DOE OSTI2023

Search for an axion-like particle in radiative $J/ψ$ decays

We search for an axion-like particle (ALP) a through the process $\psi$(3686) → π + π – J/$\psi$, J/$\psi$ → γa, a → γγ in a data sample of (2.71 ± 0.01) x 10 9 $\psi$(3686) events collected by the BESIII detector. No significant ALP signal is observed over the expected background, and the upper limits on the branching fraction of the decay J/$\psi$ → γa and the ALP-photon coupling constant g aγγ are set at 95% confidence level in the mass range of 0.165 ≤ m a ≤ 2.84 GeV/c 2 . The limits on $\mathscr{B}$(J/$\psi$ → γa) range from 8.3 x 10 –8 to 1.8 x 10 –6 over the search region, and the constraints on the ALP-photon coupling are the most stringent to date for 0.165 ≤ m a ≤ 1.468 GeV/c 2 .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Search for invisible decays of a dark photon using e + e – annihilation data at BESIII

We report a search for a dark photon using 14.9 fb –1 of e + e – annihilation data taken at center-of-mass energies from 4.13 to 4.60 GeV with the BESIII detector operated at the BEPCII storage ring. The dark photon is assumed to be produced in the radiative annihilation process of e + e – and to predominantly decay into light dark matter particles, which escape from the detector undetected. The mass range from 1.5 to 2.9 GeV is scanned for the dark photon candidate, and no significant signal is observed. The mass dependent upper limits at the 90% confidence level on the coupling strength parameter ϵ for a dark photon coupling with an ordinary photon vary between 1.6 x 10 –3 and 5.7 x 10 –3 .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Search for the semi-leptonic decays Λ c + → Λ π + π - e + ν e and Λ c + → p K S 0 π - e + ν e

We search for the semi-leptonic decays $Λ^+_c$ → Λπ + π - e + ν e and $Λ^+_c$ → p$K^0_S$π - e + ν e in a sample of 4.5 fb -1 of e + e - annihilation data collected in the center-of-mass energy region between 4.600 GeV and 4.699 GeV by the BESIII detector at the BEPCII. No significant signals are observed, and the upper limits on the decay branching fractions are set to be B($Λ^+_c$ → Λπ + π - e + ν e ) < 3.9 × 10 -4 and B($Λ^+_c$ → p$K^0_S$π - e + ν e ) < 3.3 × 10 -4 at the 90% confidence level, respectively

$Λ^+_c$↗
DOE OSTI2020

The anomalous magnetic moment of the muon in the Standard Model

We review the present status of the Standard Model calculation of the anomalous magnetic moment of the muon. This is performed in a perturbative expansion in the fine-structure constant α and is broken down into pure QED, electroweak, and hadronic contributions. The pure QED contribution is by far the largest and has been evaluated up to and including O(α 5 ) with negligible numerical uncertainty. The electroweak contribution is suppressed by (m μ / M W ) 2 and only shows up at the level of the seventh significant digit. It has been evaluated up to two loops and is known to better than one percent. Hadronic contributions are the most difficult to calculate and are responsible for almost all of the theoretical uncertainty. The leading hadronic contribution appears at O(α 2 ) and is due to hadronic vacuum polarization, whereas at O(α 3 ) the hadronic light-by-light scattering contribution appears. Given the low characteristic scale of this observable, these contributions have to be calculated with nonperturbative methods, in particular, dispersion relations and the lattice approach to QCD. The largest part of this review is dedicated to a detailed account of recent efforts to improve the calculation of these two contributions with either a data-driven, dispersive approach, or a first- principle, lattice-QCD approach. The final result reads $a$$^{SM}_{μ}$ = 116 591 810(43) × 10 −11 and is smaller than the Brookhaven measurement by 3.7σ. The experimental uncertainty will soon be reduced by up to a factor four by the new experiment currently running at Fermilab, and also by the future J-PARC experiment. Furthermore, this and the prospects to further reduce the theoretical uncertainty in the near future – which are also discussed here – make this quantity one of the most promising places to look for evidence of new physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗