Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic spectra”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Scattering of Solar X-Rays by Jupiter and Saturn

Soft X-ray emission has been observed from the disk of both Jupiter and Saturn as well as from the auroral regions of these planets. The low-latitude disk emission as observed by ROSAT, the Chandra X-Ray Observatory, and XMM-Newton appears to be uniformly distributed across the disk and to be correlated with solar activity. These characteristics suggest that the source of the disk x-rays are: (1) elastic scattering of solar X-rays by atmospheric neutrals (2) absorption of solar X-rays in the carbon K-shell followed by fluorescent emission. The carbon atoms are found in methane molecules located below the homopause. In this paper we present the results of calculations of the scattering albedo and of the emitted x-ray intensity for a range of atmospheric abundances and for a number of solar irradiance spectra. The model calculations are compared with recent x-ray observations of Jupiter and Saturn.

Cravens, T. E.↗

Characterizing Young Giant Planets with the Gemini Planet Imager: An Iterative Approach to Planet Characterization

After discovery, the first task of exoplanet science is characterization. However experience has shown that the limited spectral range and resolution of most directly imaged exoplanet data requires an iterative approach to spectral modeling. Simple, brown dwarf-like models, must first be tested to ascertain if they are both adequate to reproduce the available data and consistent with additional constraints, including the age of the system and available limits on the planet's mass and luminosity, if any. When agreement is lacking, progressively more complex solutions must be considered, including non-solar composition, partial cloudiness, and disequilibrium chemistry. Such additional complexity must be balanced against an understanding of the limitations of the atmospheric models themselves. For example while great strides have been made in improving the opacities of important molecules, particularly NH3 and CH4, at high temperatures, much more work is needed to understand the opacity of atomic Na and K. The highly pressure broadened fundamental band of Na and K in the optical stretches into the near-infrared, strongly influencing the spectral shape of Y and J spectral bands. Discerning gravity and atmospheric composition is difficult, if not impossible, without both good atomic opacities as well as an excellent understanding of the relevant atmospheric chemistry. I will present examples of the iterative process of directly imaged exoplanet characterization as applied to both known and potentially newly discovered exoplanets with a focus on constraints provided by GPI spectra. If a new GPI planet is lacking, as a case study I will discuss HR 8799 c and d will explain why some solutions, such as spatially inhomogeneous cloudiness, introduce their own additional layers of complexity. If spectra of new planets from GPI are available I will explain the modeling process in the context of understanding these new worlds.

exoplanets↗

Atomic Iron and Nickel in the Coma of C/1996 B2 (Hyakutake): Production Rates, Emission Mechanisms, and Possible Parents

Abstract Two papers recently reported the detection of gaseous nickel and iron in the comae of over 20 comets from observations collected over two decades, including interstellar comet 2I/Borisov. To evaluate the state of the laboratory data in support of these identifications, we reanalyzed archived spectra of comet C/1996 B2 (Hyakutake), one of the nearest and brightest comets of the past century, using a combined experimental and computational approach. We developed a new, many-level fluorescence model that indicates that the fluorescence emissions of Fe I and Ni I vary greatly with heliocentric velocity. Combining this model with laboratory spectra of an Fe-Ni plasma, we identified 22 lines of Fe I and 14 lines of Ni I in the spectrum of Hyakutake. Using Haser models, we estimate the nickel and iron production rates as Q Ni = (2.6–4.1) × 10 22 s −1 and Q Fe = (0.4–2.8) × 10 23 s −1 . From derived column densities, the Ni/Fe abundance ratio log 10 [Ni/Fe] = −0.15 ± 0.07 deviates significantly from solar abundance ratios, and it is consistent with the ratios observed in solar system comets. Possible production and emission mechanisms are analyzed in the context of existing laboratory measurements. Based on the observed spatial distributions, excellent fluorescence model agreement, and Ni/Fe ratio, our findings support an origin consisting of a short-lived unknown parent followed by fluorescence emission. Our models suggest that the strong heliocentric velocity dependence of the fluorescence efficiencies can provide a meaningful test of the physical process responsible for the Fe I and Ni I emission.

Bromley, S. J. (ORCID:0000000321108152)↗

Width of atomic L2 and L3 vacancy states near Z=30.

Results of an investigation of the discontinuity in the L2 level width and the L3-M45M45/L2-M45M45 Auger intensity ratio at Z=30. The afore-mentioned intensity ratio is found to undergo a sudden decrease at Z=30. Relative L2 and L3 level widths of Cu and Zn are derived from photoelectron spectra; while the L3 width increases from Cu to Zn, the L2 width of Cu is greater than that of Zn, contrary to the general trend. The above-mentioned discontinuity is traced to a discontinuity in the Coster-Kronig transition probability f sub 23 predicted in earlier calculations.

Yin, L. I.↗

Broadening of the R(0) and P(2) Lines in the 13CO Fundamental by Helium Atoms from 300 K down to 12 K: Measurements and Comparison with Close-Coupling Calculations

We present measurements of He-broadening parameters for the R(0) and O(2) lines in the fundamental band of 13CO at different temperatures between 12K and room temperature. The broadening parameters are determined, taking into account confinement narrowing, by simultaneous least-squares fitting of spectra recorded using a frequency stabilized diode laser spectrometer. The pressure broadening cross sections are deduced and compared to close-coupling calculations and earlier results obtained for rotational transitions of 12 CO.

Thibault, F.↗

Hubble Space Telescope UV spectral observations of Io passing into eclipse

Time-resolved spectra of Io have been obtained with the Faint Object Spectrograph on the Hubble Space Telescope in January 1992 at times centered on the passage of Io into Jupiter's shadow. Two different eclipse observations covered 1100-1600 A and 2250-3300 A. In the far ultraviolet(far-UV) range, emission lines of atomic sulfur and oxygen from Io's atmosphere (similar to those previously detected with the International Ultraviolet Explorer (IUE)) have been observed from Io in sunlight, and the spatial extent of the emitting region has been resolved for the first time: this is 0.5-1 Io radii (R(sub Io)) above the surface. The emission lines are typically 1kR in brightness while Io is in sunlight, and decrease to a few hundred Rayleighs within 20 min or less of Io's passing into shadow. If the emissions are produced in Io's ionosphere, the decrease in shadow appears consistent with the collisional slowing and recombination of photoelectrons in 100-1000 s, with recombination an important quenching process if the dominant ion is molecular (i.e., SO2(+)) condensation, with the residual emission in shadow due either to plasma impact of gas above the hot volcanic calderas or electron impact on S and O. In the near-UV range, we have not detected any airglow emissions from Io's atmosphere in shadow, with the main limitation being a high level of scattered light from Jupiter. We derive a 3 sigma upper limit to the 2560 A SO emission feature of 1 KR, which is close to what is expected from electron impact on SO2 based on the obs erved brightness of the FUV S and O lines in shadow. A high signal-to-noise spectrum of Io's albedo in sunlight reveals a spectral shape similar to laboratory spectra of SO2 frost reflectivity, and the relative albedo spectrum changed as Io passed into eclipse and part of the disk was in shadow. No specific SO2 gas absorption features appear in the albedo spectrum, although there could be substantial gas absorption near 2800 A if the individual lines are narrow and saturated. Finally, we present preliminary models for the near-UV spectrum of Io as functions of SO2 frost areal coverage and SO2 gas density.

Clarke, John T.↗

Atomically dispersed zeolite-supported rhodium complex: Selective and stable catalyst for acetylene semi-hydrogenation

In this study, supported rhodium catalysts are known to be unselective for semi-hydrogenation reactions. Here, by tuning the electronic structure of supported mononuclear rhodium sites determined by the metal nuclearity and the electron-donor properties of the support, we report that atomically dispersed HY zeolite-supported rhodium with reactive acetylene ligands affords a stable ethylene selectivity > 90 % for acetylene semi-hydrogenation at 373 K and atmospheric pressure, even when ethylene is present in a large excess over acetylene. Infrared and X-ray absorption spectra and measurements of rates of the catalytic reaction complemented with calculations at the level of density functional theory show how the catalyst performance depends on the electronic structure of the rhodium, influenced by the support as a ligand that is a weak electron donor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Performance Semiempirical Excited-State Molecular Dynamics Powered by Graphics Processing Units

Here, this Letter introduces excited-state molecular dynamics in PYSEQM, a GPU-accelerated semiempirical quantum chemistry engine implemented in PyTorch. The new module enables Born–Oppenheimer molecular dynamics (BOMD) using configuration-interaction singles and random phase approximation for excited states, allowing long trajectories and large statistical ensembles to be simulated efficiently on a single GPU. We also implement an extended Lagrangian excited-state BOMD (XL-ESMD) scheme that propagates auxiliary electronic variables, enabling relaxed ground and excited-state convergence thresholds without compromising energy conservation. The excited-state BOMD implementation scales smoothly from small chromophores to a nearly 900-atom dendrimer (taking 6.5 s per MD step). PYSEQM also supports batched execution, allowing many geometries or trajectories to be evaluated in a single GPU launch, substantially increasing throughput and making ensemble-based protocols routine. As a demonstration, we compute absorption, emission, and infrared spectra from trajectories propagated on the ground and first excited states. The XL-ESMD scheme yields identical spectra at significantly lower computational cost, establishing the role of extended Lagrangian based dynamics for efficient excited-state BOMD simulations. Beyond raw performance, PYSEQM’s PyTorch foundation provides automatic differentiation for forces, efficient GPU batching, and seamless interfacing with machine learning models. These capabilities position PYSEQM as a practical platform for machine learning-augmented excited-state dynamics and lay the foundation for future data-driven nonadiabatic excited-state dynamics modeling of ultrafast spectroscopic probes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoluminescence and Raman spectroscopy of wide bandgap semiconductors damaged by deep-UV laser irradiation

The effects of a pulsed, focused, deep-UV (4.66 eV) laser on wide and ultra-wide bandgap semiconductors were investigated with photoluminescence (PL) and Raman spectroscopy. Three semiconductor single crystals were studied: silicon carbide (6H-SiC), gallium nitride (GaN), and gallium oxide (β-Ga 2 O 3 ). Atomic emission lines from neutral Ga or Si were observed during the laser-damage process. For all three semiconductors, PL mapping (3.49 eV laser excitation) of the damaged material revealed visible emission bands in the 2.6–2.8 eV range, attributed to point defects. Raman spectra (2.33 eV excitation) showed a reduction in the Raman peak intensities in the damaged region, along with weak PL bands around 1.9–2.1 eV.

36 MATERIALS SCIENCE↗

MOCVD Growth and Characterization of Wide Bandgap ZnGeN 2 Thin Films

ZnGeN 2 is a wide bandgap material having less than 0.1% lattice mismatch with GaN and bandgap within few percent of that of GaN. Based on the first principle calculations, the valence band of ZnGeN 2 is situated ~1.4 eV above that of GaN at the heterointerface. Such a staggered band alignment between two closely lattice matched materials has already been demonstrated promising for novel optoelectronic device designs, for example, high efficiency blue and green light emitting diodes. However, the research on ZnGeN 2 is yet to pass the inceptive period. We report on the growth of single crystalline ZnGeN 2 films using metalorganic chemical vapor deposition and investigation on the crystalline, optical, electrical properties. Diethylzinc (DEZn), germane (GeH 4 ) and ammonia were used as the precursors for Zn, Ge and N, respectively. Films were grown on GaN and sapphire substrates. The Zn/Ge atomic ratio in the films determined from energy dispersive X-ray spectroscopy was found to decrease with increase in growth temperature but to increase with increase in pressure and DEZn/GeH 4 molar flow rate ratio. The X-ray diffraction (XRD) 2θ-ω spectra of the single crystalline ZnGeN 2 films resembled those of orthorhombic (perfectly ordered cations) or distorted wurtzite (disordered cations) polymorphs. High resolution scanning transmission electron microscopy imaging was used to further investigate the crystalline quality and crystalline structure of the films. The single crystalline films on c-sapphire or GaN substrates were found to have planar surface from scanning electron micrographs while those on r-sapphire substrate had stepped surface. No near band edge peak but a broad peak at ~2.05 eV was observed in the photoluminescence (PL) spectra, which was attributed to the transitions involving deep level defects. The PL excitation spectra peaked around 3.4 eV, which is due to the enhanced absorption of photons having energy close to the band gap. The as grown films were found to be n-type with 10 18 – 10 19 cm -3 carrier densities and mobility up to 17 cm 2 /V·s. In the end, the advancement made in this work regarding the growth of ZnGeN 2 thin films is a footstep towards the understanding of the material itself and in turn, towards the implementation of ZnGeN 2 based novel device designs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-Temperature Dissociation of Neopentanol: Shock Tube/Photoionization Mass Spectrometry Studies

Herein, the pyrolysis mechanism of 2,2-dimethylpropan-1-ol (neopentanol) has been investigated at high temperatures (1128–1401K) and high pressures (5 and 15 bar). The experiments were performed in a miniature shock tube coupled to a time-of-flight mass spectrometer. Cations were generated by tunable vacuum ultraviolet photoionization resulting in multidimensional data sets containing mass and photoionization spectra and the time histories of species. At the elevated temperatures and pressures of this work, neopentanol was determined to dissociate primarily by the scission of a C–C bond yielding tert-butyl and hydroxymethyl radicals. These promptly form isobutene and formaldehyde by H-atom elimination. In the structurally similar molecule neopentane, roaming radical reactions have previously been found to be important under conditions close to the present work (1260–1459 K, 1.1 bar). There are two possible roaming radical reactions for neopentanol. However, no experimental evidence for these reactions was found at the elevated pressures in this study, and the dissociation of neopentanol is dominated by bond scission yielding radical products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generation of Tin-Vacancy Centers in Diamond via Shallow Ion Implantation and Subsequent Diamond Overgrowth

Group IV color centers in diamond have garnered great interest for their potential as optically active solid-state spin qubits. The future utilization of such emitters requires the development of precise site-controlled emitter generation techniques that are compatible with high-quality nanophotonic devices. This task is more challenging for color centers with large group IV impurity atoms, which are otherwise promising because of their predicted long spin coherence times without a dilution refrigerator. For example, when applied to the negatively charged tin-vacancy (SnV – ) center, conventional site-controlled color center generation methods either damage the diamond surface or yield bulk spectra with unexplained features. Here we demonstrate a novel method to generate site-controlled SnV – centers with clean bulk spectra. We shallowly implant Sn ions through a thin implantation mask and subsequently grow a layer of diamond via chemical vapor deposition. This method can be extended to other color centers and integrated with quantum nanophotonic device fabrication.

36 MATERIALS SCIENCE↗

Single Particle Cathodoluminescence Spectroscopy with Sub-20 nm, Electron-Stable Phosphors

Lanthanide-doped nanophosphors have emerged as promising optical labels for high-resolution, "multicolor"electron microscopy. Here, we develop a library of 11 unique lanthanide-doped nanophosphors with average edge lengths of 15.2 ± 2.0 nm (N = 4284). These nanophosphors consist of an electron-stable BaYF5 host lattice doped at 25% atomic concentration with the lanthanides Pr 3+ , Nd 3+ , Sm 3+ , Eu 3+ , Tb 3+ , Dy 3+ , Ce 3+ , Ho 3+ , Er 3+ , Tm 3+ , and Yb 3+ . Under ~100 pA/nm 2 beam beam current in a transmission electron microscope, each nanophosphor species exhibits strong cathodoluminescence spectra with sharp characteristic emission lines for each lanthanide. The bright emission and stability of these nanoparticles enable not only ensemble, but also single-particle cathodoluminescence spectroscopy, which we demonstrate with BaYF 5 :Ln 3+ , where Ln 3+ = Tb 3+ , Ho 3+ , Er 3+ , Sm 3+ , Eu 3+ , or Pr 3+ . Single-particle cathodoluminescence corresponds directly with HAADF intensity across nanoparticles, confirming high spatial localization of the measured cathodoluminescence signal of lanthanide-doped nanophosphors. Furthermore, our synthesis and characterization of sub-20 nm, electron-stable nanophosphors provides a robust material platform to achieve single-molecule labeled correlative cathodoluminescence electron microscopy, a critical foundation for high-resolution correlation of single molecules within the context of cellular ultrastructure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Performance of High Stopping Power Bismuth-Loaded Plastic Scintillators for Radiation Portal Monitors

Plastic scintillators are widely used in radiation portal monitors because of their low cost and availability in large sizes. However, due to their low density and low effective atomic number (Z), they offer low intrinsic efficiency and little spectroscopic information. The addition of high-Z constituents to these plastics can greatly increase both their total stopping power and the amount of photoelectric absorption, leading to full-energy deposition and thus useful gamma spectra. Herein, we present the performance of the latest formulation of Bi-loaded plastic scintillators showing their useful spectroscopic information up to relatively high energy (~1 MeV) due to their high stopping power compared to the current commercially available plastics. These Bi-loaded plastics use 20 weight percent (wt%) Bi-pivalate (8 wt% elemental Bi) dissolved in polyvinyltoluene (PVT) matrix and conventional fast fluors (~10 ns decay time). These Bi-loaded plastics achieve up to approximately 6000 photons/MeV and have been produced in sizes up to 17 in 3 . The performance of these Bi-loaded plastics is also demonstrated in the existing portal monitor hardware (Rapiscan Model TSA Trainer 770) showing the possibility to provide improved sensitivity as a drop-in replacement with continued scale-up.

42 ENGINEERING↗

Inspection of next-generation EUV resists with nano-projectile secondary ion mass spectrometry

There is a rapidly growing need for new materials for extreme ultraviolet (EUV) lithography, which incorporate high EUV absorbing elements. Hybrid resists, which are a combination of inorganic and organic moieties, are promising as they offer both high EUV sensitivity and high etch resistance. However, there is a glaring lack of methods to examine the uniformity of these important materials at the nanoscale. We examine the capabilities of nano-projectile secondary ion mass spectrometry (NP-SIMS) to investigate hybrid resists. NP-SIMS is a mass spectrometry-based technique with high lateral resolution. Using NP-SIMS, a surface is probed stochastically with a suite of individual projectiles, 10 6 to 10 7 in total, separated in time and space. Examining these individual mass spectra allows for nanoscale investigation of the uniformity of the surface. We evaluated the performance of NP-SIMS using samples of poly(methyl methacrylate) (PMMA) infiltrated with varying amounts of InO x via vapor-phase infiltration (VPI), an organic–inorganic hybridization method derived from atomic layer deposition. Here, we found that NP-SIMS measurements contained abundant characteristic ions related to both the PMMA and infiltrated In. The intensity of In atomic ions increased linearly with the number of infiltration cycles; however, the uniformity of In and PMMA varied with the number of infiltration cycles. After one cycle, we found that both the PMMA and In were relatively inhomogeneous. The homogeneity improved with subsequent infiltration cycles. In addition, NP-SIMS measurements contained characteristic ions related to the infiltration reaction and provided insights into the VPI mechanism. Overall, the results show that NP-SIMS is capable of examining both the inorganic and organic moieties in a hybrid resist and will be an important method for understanding the performance of these materials for use in EUV lithography.

36 MATERIALS SCIENCE↗

Theoretical study of the X-ray emission from astrophysical shock waves

Theoretical X-ray emission spectra are needed to interpret the X-ray emission observed by many low and moderate resolution X-ray instruments, and to provide diagnosis of physical conditions for high resolution spectra. Over the past decade, a set of model codes which compute the X-ray and XUV emission for a wide set of physical conditions, including high or low densities, photoionized gas, and time-dependent ionization balance was developed. In the past year, the atomic rate coefficients in the code was improved. Further capabilities were added, and applied to several astrophysical problems.

Raymond, J.↗