Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analysis programs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Advanced beaded and tubular structural panels. Volume 2: Fabrication

A study was conducted to exploit the efficiency of curved elements in the design of lightweight structural panels under combined loads of axial compression, inplane shear, and bending. A summary of the total program (analysis, fabrication and test) is presented in document NASA CR-2514. Detailed descriptions of the analysis effort and of the panel tests are contained in supplementary documents NASA CR-132460 and NASA-CR-132515 respectively. Data are also given on the development of economical fabrication techniques to minimize the effects of fabrication limitations on optimum panel designs.

Musgrove, M. D.↗
NASA NTRS1975

Cyclic stress analysis of an air-cooled turbine vane

The effects of gas pressure level, coolant temperature, and coolant flow rate on the stress-strain history and life of an air-cooled vane were analyzed using measured and calculated transient metal temperatures and a turbine blade stress analysis program. Predicted failure locations were compared to results from cyclic tests in a static cascade and engine. The results indicate that a high gas pressure was detrimental, a high coolant flow rate somewhat beneficial, and a low coolant temperature the most beneficial to vane life.

Kaufman, A.↗
NASA NTRS1975

Instrumentation requirements for aircraft parameter identification with application to the helicopter

The extent to which instrumentation errors cause degradation in the knowledge of stability and control derivatives identified for flight tests was studied along with the resultant degradation of the flight system performance base on these derivatives. The error in measurement and data processing systems used for parameter identification, error analysis techniques, and the effects of instrumentation, errors on the accuracy of parameter estimates are discussed. The analysis programs were used to study instrumentation error effects on the accuracy of the identified stability and control derivatives of the CH-46 helicopter.

Sorensen, J. A.↗
NASA NTRS1965

A Field-Effect Transistor (FET) model for ASAP

The derivation of the circuitry of a field effect transistor (FET) model, the procedure for adapting the model to automated statistical analysis program (ASAP), and the results of applying ASAP on this model are described.

Ming, L.↗
NASA NTRS1976

A general geometric theory of attitude determination from directional sensing

A general geometric theory of spacecraft attitude determination from external reference direction sensors was presented. Outputs of different sensors are reduced to two kinds of basic directional measurements. Errors in these measurement equations are studied in detail. The partial derivatives of measurements with respect to the spacecraft orbit, the spacecraft attitude, and the error parameters form the basis for all orbit and attitude determination schemes and error analysis programs and are presented in a series of tables. The question of attitude observability is studied with the introduction of a graphical construction which provides a great deal of physical insight. The result is applied to the attitude observability of the IMP-8 spacecraft.

Fang, B. T.↗
NASA NTRS1976

Maximum likelihood convolutional decoding (MCD) performance due to system losses

A model for predicting the computational performance of a maximum likelihood convolutional decoder (MCD) operating in a noisy carrier reference environment is described. This model is used to develop a subroutine that will be utilized by the Telemetry Analysis Program to compute the MCD bit error rate. When this computational model is averaged over noisy reference phase errors using a high-rate interpolation scheme, the results are found to agree quite favorably with experimental measurements.

Webster, L.↗
NASA NTRS1975

100-kW hingeless metal wind turbine blade design, analysis and fabrication

The design, fabrication and analysis of aluminum wind turbine rotor blades is discussed. The blades are designed to meet criteria established for a 100-kilowatt wind turbine generator operating between 8 and 60-mile-per-hour speeds at 40 revolutions per minute. The design wind speed is 18 miles per hour. Two rotor blades are used on a new facility which includes a hingeless hub and its shaft, gearbox, generator and tower. Experience shows that, for stopped rotors, safe wind speeds are strongly dependent on blade torsional and bending rigidities which the basic D spar structural blade design provides. The 0.25-inch-thick nose skin is brake/bump formed to provide the basic 'D' spar structure for the tapered, twisted blades. Adequate margins for flutter and divergence are predicted from the use of existing, correlated stopped rotor and helicopter rotor analysis programs.

Donham, R. E.↗
NASA NTRS1975

Efficiency of silicon solar cells as a function of base layer resistivity

This paper reports on a theoretical study of the limitations on silicon solar-cell efficiency for both n(+)-p and n(+)-p-p(+) type cells. Detailed calculations have been made of solar-cell operation using a general computer analysis program for semiconductor devices. The computer program, which simultaneously solves Poisson's equation and the electron and hole quasi-Fermi level equations, provides an accurate numerical solution of solar-cell operation without limiting assumptions or approximations. It is found that minority-carrier lifetime and heavy doping effects in the n(+) surface region present serious limitations to efficiency in low-resistivity silicon solar cells.

Dunbar, P. M.↗
NASA NTRS1976

Computer analysis speeds corrugated horn design

A computer analysis program is developed for selecting the optimum flare angle and horn length of a corrugated horn design, the horn diameter, and the radiation pattern, before resorting to machining operations. The calculated antenna pattern is best suited to narrowband designs, and averaging of the E and H planes is recommended for wideband work. The program language used is BASIC. Some design examples are provided with representative data, printouts, and a rundown of the equations programmed.

Loefer, G. R.↗
NASA NTRS1976

Space shuttle navigation analysis

A detailed analysis of space shuttle navigation for each of the major mission phases is presented. A covariance analysis program for prelaunch IMU calibration and alignment for the orbital flight tests (OFT) is described, and a partial error budget is presented. The ascent, orbital operations and deorbit maneuver study considered GPS-aided inertial navigation in the Phase III GPS (1984+) time frame. The entry and landing study evaluated navigation performance for the OFT baseline system. Detailed error budgets and sensitivity analyses are provided for both the ascent and entry studies.

Jones, H. L.↗
NASA NTRS1977

A computer software system for integration and analysis of grid-based remote sensing data with other natural resource data. Remote Sensing Project

A computer-based information system is described designed to assist in the integration of commonly available spatial data for regional planning and resource analysis. The Resource Analysis Program (RAP) provides a variety of analytical and mapping phases for single factor or multi-factor analyses. The unique analytical and graphic capabilities of RAP are demonstrated with a study conducted in Windsor Township, Eaton County, Michigan. Soil, land cover/use, topographic and geological maps were used as a data base to develope an eleven map portfolio. The major themes of the portfolio are land cover/use, non-point water pollution, waste disposal, and ground water recharge.

Tilmann, S. E.↗
NASA NTRS1977

A computer software system for integration and analysis of grid-based remote sensing data with other natural resource data

This report describes a computer-based information system designed to assist in the integration of commonly available spatial data for regional planning and resource analysis. The Resource Analysis Program (RAP) provides a variety of analytical and mapping phases for single factor or multi-factor analyses. The unique analytical and graphic capabilities of RAP are demonstrated with a study conducted in Windsor Township, Eaton County, Michigan. For this study, soil, land cover/use, topographic and geological maps were used as a data base to develop an eleven map portfolio. The major themes of the portfolio are land cover/use, nonpoint water pollution, waste disposal, and ground water recharge.

Tilmann, S. E.↗
NASA NTRS1976

On the use of two hardening rules of plasticity in incremental and pseudo force analysis

The tangent stiffness and pseudo force forms of the equations of motion are first derived within the context of a total Lagrangian formulation. After a brief discussion of available incremental theory plasticity models, the small strain formulations and computational procedures of the mechanical sublayer model and combined kinematic-isotropic hardening as used in the general purpose structural analysis program AGGIE I are presented. Several sample problems are then presented along with recommended guidelines for use of the two plasticity models.

Hunsaker, B., Jr.↗
NASA NTRS1977

Axially grooved heat pipes - 1976

This paper summarizes the 'state-of-the-art' of axially grooved heat pipes. Applications are identified and the related heat pipe design and performance are defined. Recent developments in the analysis, design and fabrication of axially grooved hardware are also discussed. A mathematical model which predicts the hydrodynamic behavior and accounts for liquid recession, liquid/vapor shear interaction and 1-g puddle flow is also presented. Performance data for various fluids in the 100-500 K range is compared to predictions from the Groove Analysis Program (GAP). Finally, a simplified closed form solution which accounts for gravity effects, self-priming and composite pumping by the grooves as well as all of the hydrodynamic losses is also discussed.

Brennan, P. J.↗
NASA NTRS1977

Axially grooved heat pipe study

A technology evaluation study on axially grooved heat pipes is presented. The state-of-the-art is reviewed and present and future requirements are identified. Analytical models, the Groove Analysis Program (GAP) and a closed form solution, were developed to facilitate parametric performance evaluations. GAP provides a numerical solution of the differential equations which govern the hydrodynamic flow. The model accounts for liquid recession, liquid/vapor shear interaction, puddle flow as well as laminar and turbulent vapor flow conditions. The closed form solution was developed to reduce computation time and complexity in parametric evaluations. It is applicable to laminar and ideal charge conditions, liquid/vapor shear interaction, and an empirical liquid flow factor which accounts for groove geometry and liquid recession effects. The validity of the closed form solution is verified by comparison with GAP predictions and measured data.

Source record↗
NASA NTRS1978

Activities of the US Geological Survey in Applications of Remote Sensing in the Chesapeake Bay Region

The application of remote sensing in the Chesapeake Bay region has been a central concern of three project activities of the U.S. Geological Survey: two are developmental, and one is operational. The two developmental activities were experiments in land-use and land-cover inventory and change detection using remotely sensed data from aircraft and from the LANDSAT and Skylab satellites. One of these is CARETS (Central Atlantic Regional Ecological Test Site). The other developmental task is the Census Cities Experiment in Urban Change Detection. The present major concern is an operational land-use and land-cover data-analysis program, including a supporting geographical information system.

Wray, J. R.↗
NASA NTRS1977

Thermal radiation analysis system (TRASYS 2), programmer's manual

TRASYS, the Thermal Radiation Analysis System, is a digital computer software system with a generalized capability to solve the radiation-related aspects of thermal analysis problems. When used in conjunction with a generalized thermal analysis program such as the Systems Improved Numerical Differencing Analyzer (SINDA) program, any thermal problem that can be expressed in terms of a lumped parameter, radiation conductor thermal network can be solved. The function of TRASYS is twofold. It provides: 1) Internode radiation interchange data; 2) Incident and absorbed heat rate data from environmental radiant heat sources. Data of both types are provided in a format directly usable by the thermal analyzer programs.

Connor, R. J.↗