Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WIRES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Reaction Between Thin Gold Wires and Pb-Sn-In Solder (37.5%, 37.5%, 25%), Part A: The Radial Reaction Inside The Solder Mounds, Its Linear Reaction Model, Statistical Variation of Reaction Rate, and Induced Structural Changes In The Solder Mounds.

Thermodynamics favors the reaction between indium and gold, since the heat of formation of AuIn{sub 2} is 6 kcal/mole, substantially larger than the heat of formation of any other possible reaction product. Thermodynamic equilibrium between gold and the elements in the solder mound is reached only when ALL gold is converted to AuIn{sub 2}. There are two aspects to this conversion: (A) the reaction WITHIN the solder mound (called here 'radial reaction') and (B) the reaction OUTSIDE the solder mound (called here 'axial reaction') and the transition from (A) to (B). The reaction between thin gold detonator wires and the In/Pb/Sn solder mound in older detonators has been looked at repeatedly. There are, in addition, two studies which look at the reaction between indium and gold in planar geometry. All data are shown in tables I to V. It is the objective of this section dealing with aspect (A), to combine all of these results into a reaction model and to use this reaction model to reliably and conservatively predict the gold-solder reaction rate of soldered gold bridge-wires as a function of storage temperature and time.

36 MATERIALS SCIENCE↗

Humidity effects on wire insulation breakdown strength.

Methods for the testing of the dielectric breakdown strength of insulation on metal wires under variable humidity conditions were developed. Two methods, an ASTM method and the twisted pair method, were compared to determine if the twisted pair method could be used for determination of breakdown strength under variable humidity conditions. It was concluded that, although there were small differences in outcomes between the two testing methods, the non-standard method (twisted pair) would be appropriate to use for further testing of the effects of humidity on breakdown performance. The dielectric breakdown strength of 34G copper wire insulated with double layer Poly-Thermaleze/Polyamide-imide insulation was measured using the twisted pair method under a variety of relative humidity (RH) conditions and exposure times. Humidity at 50% RH and below was not found to affect the dielectric breakdown strength. At 80% RH the dielectric breakdown strength was significantly diminished. No effect for exposure time up to 140 hours was observed at 50 or 80%RH.

Appelhans, Leah↗

Electron Lens as Beam-Beam Wire Compensator in HL-LHC

Current wires are considered for compensation of long-range beam-beam interactions for the High Luminosity upgrade (HL-LHC) of the Large Hadron Collider at CERN. In this note, we demonstrate the advantage of using Electron Lens for this purpose instead of a conventional current-bearing wire.

Valishev, A.↗

Improving RF Characteristics of Wire: CRADA Final Report

Los Alamos National Laboratory (LANL) and the partner investigated microwave loss characteristics of coated wire made at LANL. The characterization of the coatings was performed using a microwave cavity. The loss characteristics of the coatings was compared to those of bare Cu and Ag wires of the same diameter.

36 MATERIALS SCIENCE↗

Developing Light Collection Enhancements and Wire Tensioning Methods for LArTPC Neutrino Detectors

Liquid argon Time Projection Chambers (LArTPCs) are becoming widely used as neutrino detectors because of their image-like event reconstruction which enables precision neutrino measurements. They primarily use ionisation charge to reconstruct neutrino events. It has been shown, however, that the scintillation light emitted by liquid argon could be exploited to improve their performance. As the neutrino measurements planned in the near future require large-scale experiments, their construction presents challenges in terms of both charge and light collection. In this dissertation we present solutions developed to improve the performance in both aspects of these detectors. We present a new wire tensioning measurement method that allows a remote measurement of the tension of the large number wires that constitute the TPC anode. We also discuss the development and installation of WLS-compound covered foils for the SBND neutrino detector at Fermilab, which is a technique proposed t o augment light collection in LArTPCs. This included preparing a SBND-like mesh cathode and testing it in the Run III of LArIAT, a test beam detector also located at Fermilab. Finally, we present a study aimed at understanding late scintillation light emitted by recombining positive argon ions using LArIAT data, which could affect large scale surface detectors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Description of CBETA magnet tuning wire holders

A non-­magnetic insert will be placed directly inside the permanent magnet blocks in every CBETA Halbach magnet in order to hold a set of iron “tuning wires”. These wires have various lengths around the perimeter of the aperture in order to cancel multipole field errors from the permanent magnet blocks.

43 PARTICLE ACCELERATORS↗

Wire Arc Additive Manufacturing

Project highlight. This project designs and implements a new additive manufacturing capability at Savannah River National Laboratory. Wire Arc Additive Manufacturing is an Advanced Manufacturing technology that enables materials and energy savings by producing materials that are in near net shapes to minimize material losses compared to conventional forging and machining techniques. Wire arc additive manufacturing is an evolving technology that can be used to fabricate large components with significantly less materials waste than conventional processing. This project includes an engineering model, an aspect that is largely overlooked in the Additive Manufacturing modeling work where the emphasis has been on mechanistic and microscopic modeling, to estimate the residual stresses and distortions. The Abaqus Weld Interface software coupled with user subroutines in Fortran enable the local cooling rates to be estimated to provide a coarse scale model for the secondary dendrite arm spacing, a parameter useful to estimate mechanical properties.

36 MATERIALS SCIENCE↗

Bridge-bursting and the action-integral in exploding bridge-wire (EBW) detonators

Methods of simulating the electrical characteristics of exploding bridge-wire detonators using only inert materials are reported. Specifically, it is found that both pressed finely powdered sucrose (confectioners sugar) and 3 µm aluminum oxide powder match the signals measured in a real EBW detonator with PETN fill. The exact pressing density of the inert powder is found not to affect to the measured electrical signals. Additionally, the action-integral (the time integral of bridge current squared) and energy-to-burst are measured for the same gold bridge design with several capacitor discharge units at different charge voltages and inductances as well as pseudo-constant current fireset made from charged coaxial-cables. It is found that in contrast to some reports, the action-integral to burst is not a constant for a specific bridge geometry and material, but instead is a function of the rate of current change in the bridge around the time of burst. This is explained by the confining effects of bridge-wire inertia affecting the rapid expansion of the bridge around burst time and hence the dynamic resistance.

36 MATERIALS SCIENCE↗

Design and fabrication of a 30 T superconducting solenoid using overpressure processed Bi2212 round wire

High field magnets are needed for frontier accelerator facilities and have many applications beyond high-energy physics. Of particular interest are 30-40T class (LTS/HTS hybrid) solenoids required for the final beam cooling stages of a muon collider facility. The successful design of such magnets using Bi2212 conductor depends critically on the conductor processing, stress management in the coil, and quench protection. These are the challenges addressed in the proposal and the overall objectives of the combined Phase I and Phase II projects. Bi2212 round wire conductor will be evaluated for accelerator use by concentrating on the design of a solenoid magnet that will be the enabling technology for realizing the final stages of muon beam cooling and thus a high luminosity muon collider. A full mechanical characterization of a test coil made from overpressure-processed conductor with engineering current density JE in the range of & gt;600 A/mm2 at 20-30 T will be performed. The data from the test coil will serve as input to a 30+ T magnet that will be designed, built, and tested to demonstrate the suitability of overpressure-processed Bi2212 for solenoids for final muon cooling and 6D cooling channels. Short lengths and coils wound from up to 100 m length conductor will be overpressure processed. Characterization of an overpressure processed Bi2212 round-wire based solenoid will be performed at 4.2 K in a background field of up to 14 T. The characterization will include mechanical, thermal, and quench properties. The data will be used as input to a 30+ T coil design that has suitable stress management and quench protection, to be built and tested in Phase II. Commercial applications and other benefits: The technology developed by this work will benefit high-energy physics applications. The knowledge and expertise gained from this project will enable the development of very high-field solenoids, dipoles, and quadrupoles using Bi2212 cable at low temperature for applications in future particle accelerators. The technology will also extend the range available to Nuclear Magnetic Resonance Spectroscopy, an important technique used to understand molecular structures of proteins and other materials.

43 PARTICLE ACCELERATORS↗

A multi-institution collaboration to study copper wire hybrid and laser-cut foil X-pinches

X-pinches are a pulsed power wire-array configuration that produce nanosecond and micron-scale X-ray sources with numerous applications. The earliest embodiment of the X-pinch inspired its name, as it is typically composed of two or more fine (5-50 µm) wires crossed into the shape of an X (Fig. 1a). The ‘X’ ablates when subjected to large (10 1 -10 4 kA), fast-rising (~1 kA/ns) currents, and extreme magnetic pressure at the cross-point constricts the ablated plasma, which develops instabilities and then pinches to near-zero radius, localized ‘hot spots’, emitting X-rays from a sub-nanosecond and 1 µm scale source characteristic of a hot (~1 keV), dense (10% solid density) plasma. A subsequent gap forms where the hot spot(s) occurred, across which substantial potential accelerates electron beams (e-beams) that generate larger, longer-lasting X-ray bursts composed of harder X-rays.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Single Photon Emitters Coupled to Photonic Wire bonds

This project will test the coupling of light emitted from silicon vacancy and nitrogen vacancy defects in diamond into additively manufactured photonic wire bonds toward integration into an "on-chip quantum photonics platform". These defects offer a room-temperature solid state solution for quantum information technologies but suffer from issues such as low activation rate and variable local environments. Photonic wire bonding will allow entanglement of pre-selected solid-state defects alleviating some of these issues and enable simplified integration with other photonic devices. These developments could prove to be key technologies to realize quantum secured networks for national security applications.

42 ENGINEERING↗

Integrated Field of a Finite Wire

The wire segment in question travels in a straight line from position a to b and carries current I in the direction towards b . The magnetic field of this segment alone will not be Maxwellian because the current does not satisfy the continuity equation. However, the field sum of a loop of such wires will be. The integration will be performed along the entire 𝓏 axis (-$\infty$ to $\infty$).

43 PARTICLE ACCELERATORS↗

Magnetic Potential of a Finite Wire

The wire segment in question travels in a straight line from position a to b and carries current I in the direction towards b . The magnetic field of this segment alone will not be Maxwellian because the current does not satisfy the continuity equation. However, the field sum of a loop of such wires will be.

43 PARTICLE ACCELERATORS↗

WIRE-21 Experiment Irradiation Conditions and In-Situ Data Collection

This report summarizes the in situ data collected during three cycles of irradiation (~75 days) of the Wireless Instrumented Removable Beryllium Experiment 2021 (WIRE-21) in the removable beryllium (RB) positions of the High Flux Isotope Reactor (HFIR). The experiment was designed primarily to evaluate the effects of high neutron flux and fluence on the performance of wireless temperature and pressure sensors being developed by Westinghouse Electric Company (WEC). WEC’s sensors could provide critical data regarding the evolution of centerline temperatures and pressurization due to fission gas release during fuel operation in light-water reactors (LWRs) or various advanced reactor applications. In addition to WEC’s wireless sensors, many other sensors were interrogated, including thermocouples, self-powered neutron detectors (SPNDs), distributed fiber optic temperature sensors, and passive neutron flux wires and silicon carbide thermometry.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multi material/functionally graded wire arc additive manufacturing of high strength steel valves clad with nickel alloy 625 used for oil extraction

This Phase 1 technical collaboration project (ORNL/TM-2022/2683) began on August 1st, 2020 and concluded on July 31st, 2022. The collaboration partner Schlumberger is a large business enterprise assisting oil companies to extract oil from land and subsea cost competitively and safely. It is based in Houston, Texas USA. In this work as study of additive deposition of AWS EF100S-G and AWS ERNiCrMo-3 wires via wire-arc process was conducted.

36 MATERIALS SCIENCE↗

Uncertainty Analysis of the NOvA Test Beam Wire Chambers

The Fermilab Test Beam is a beam designed for R&D for a variety of experiments taking place at Fermilab, for instance the NOvA experiment. An essential component of the NOvA Test Beam is four wire chambers which measure the transverse position of particles travelling along the beamline. Occasionally, a particle will not produce a hit in one of the four wire chambers resulting in a “3 hit track” instead of the usual “4 hit track”. In our research, we explored the possibility of including these 3 hit tracks into analysis, and how they impact relevant statistics.

Scheuermann, Elizabeth↗

Status of the MicroBooNE Inclusive Single Photon Selection Using Wire-Cell Reconstruction

MicroBooNE is a Liquid Argon Time Project Chamber (LArTPC) detector whose primary design goal is to understand the “low-energy-excess” anomaly seen by MiniBooNE. MicroBooNE’s currently published results see no excess consistent with the MiniBooNE observation, therefore creating a need for searches in more channels. This note summarizes MicroBooNE’s inclusive single photon selection using Wire-Cell reconstruction and pattern recognition, which will be used to search for a low-energy-excess (LEE) anomaly in the inclusive single photon channel. The selection is similar to the Wire-Cell inclusive electron neutrino selection, but with a different signal definition and some modifications and additions to the pattern recognition tools. A selection with 15.2% efficiency and 18.5% purity is achieved for simulated Standard Model single photon events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Status of the MicroBooNE inclusive single photon selection using Wire-Cell reconstruction

MicroBooNE is a Liquid Argon Time Project Chamber (LArTPC) detector whose primary design goal is to understand the “low-energy-excess” anomaly seen by MiniBooNE. MicroBooNE’s currently published results see no excess consistent with the MiniBooNE observation, therefore creating a need for searches in more channels. This note summarizes MicroBooNE’s inclusive single photon selection using Wire-Cell reconstruction and pattern recognition, which will be used to search for a low-energy-excess (LEE) anomaly in the inclusive single photon channel. The selection is similar to the Wire-Cell inclusive electron neutrino selection, but with a different signal definition and some modifications and additions to the pattern recognition tools. A selection with 15.2% efficiency and 18.5% purity is achieved for simulated Standard Model single photon events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗