Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WALTER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Local structure in solid solutions of stabilised zirconia with actinide dioxides (UO{sub 2}, NpO{sub 2})

The local structure of (Zr,Lu,U)O{sub 2-x} and (Zr,Y,Np)O{sub 2-x} solid solutions has been investigated by extended X-ray absorption fine structure (EXAFS). Samples were prepared by mixing reactive (Zr,Lu)O{sub 2-x} and (Zr,Y)O{sub 2-x} precursor materials with the actinide oxide powders, respectively. Sintering at 1600 {sup o}C in Ar/H{sub 2} yields a fluorite structure with U(IV) and Np(IV). As typical for stabilised zirconia the metal-oxygen and metal-metal distances are characteristic for the different metal ions. The bond lengths increase with actinide concentration, whereas highest adaptation to the bulk stabilised zirconia structure was observed for U---O and Np---O bonds. The Zr---O bond shows only a slight increase from 2.14 A at 6 mol% actinide to 2.18 A at infinite dilution in UO{sub 2} and NpO{sub 2}. The short interatomic distance between Zr and the surrounding oxygen and metal atoms indicate a low relaxation of Zr with respect to the bulk structure, i.e. a strong Pauling behaviour. -- Graphical abstract: Metal-oxygen bond distances in (Zr,Lu,U)O{sub 2-x} solid solutions with different oxygen vacancy concentrations (Lu/Zr=1 and Lu/Zr=0.5). Display Omitted Research Highlights: {yields} EXAFS indicates high U and Np adaption to the bulk structure of stabilised zirconia. {yields} Zr---O bond length is 2.18 A at infinite Zr dilution in UO{sub 2} and NpO{sub 2}. {yields} Low relaxation (strong Pauling behaviour) of Zr explains its low solubility in UO{sub 2}.

36 MATERIALS SCIENCE↗

K{sub 3}Ln[OB(OH){sub 2}]{sub 2}[HOPO{sub 3}]{sub 2} (Ln=Yb, Lu): Layered rare-earth dihydrogen borate monohydrogen phosphates

Two isotypic layered rare-earth borate phosphates, K{sub 3}Ln[OB(OH){sub 2}]{sub 2}[HOPO{sub 3}]{sub 2} (Ln=Yb, Lu), were synthesized hydrothermally and the crystal structures were determined by single-crystal X-ray diffraction (R3-bar , Z=3, Yb: a=5.6809(2) A, c=36.594(5) A, V=1022.8(2) A{sup 3}, Lu: a=5.6668(2) A, c=36.692(2) A, V=1020.4(1) A{sup 3}). The crystal structure can be described in terms of stacking of Glaserite-type slabs consisting of LnO{sub 6} octahedra interlinked by phosphate tetrahedra and additional layers of [OB(OH){sub 2}]{sup -} separated by K{sup +} ions. Field and temperature dependent measurements of the magnetic susceptibility of the Yb-compound revealed Curie-Weiss paramagnetic behavior above 120 K ({mu}{sub eff}=4.7 {mu}{sub B}). Magnetic ordering was not observed down to 1.8 K. - Graphical abstract: Two isotypic layered rare-earth borate phosphates, K{sub 3}Ln[OB(OH){sub 2}]{sub 2}[HOPO{sub 3}]{sub 2} (Ln = Yb, Lu), were synthesized hydrothermally and the crystal structures were determined by single-crystal X-ray diffraction. The structure can be described by stacking of Glaserite-type slabs and dihydrogen borate layers separated by potassium cations. Highlights: > First hydrothermal synthesis of rare-earth borate phosphates. > Instead of microcrystalline powders the synthesis of single crystals was achieved. > Successful single-crystal X-ray structure determination. > 2D arrangement of magnetic rare-earth ions. > EPR spectrum of Yb{sup 3+} at 5 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dy{sub 0.64}{l_brace}Dy{sub 5}[Fe{sub 2}C{sub 9}]{r_brace}: A complex carbide with a composite structure

The ternary carbide Dy{sub 5.64}[Fe{sub 2}C{sub 9}] has been prepared by high temperature synthesis from the elements. The compound forms as a composite structure with two partial structures, {l_brace}Dy{sub 5}[Fe{sub 2}C{sub 9}]{r_brace} and {l_brace}Dy{sub 0.64}{r_brace} crystallizing in space groups Pnam and Pbam, respectively. The lattice parameters a=2934.63(9) pm and b=1263.63(5) pm for the two partial structures are identical, whereas the c lattice parameters for {l_brace}Dy{sub 5}[Fe{sub 2}C{sub 9}]{r_brace} (c{sub H}=504.14(3) pm) and {l_brace}Dy{sub 0.64}{r_brace} (c{sub G}=1056.01(5) pm) are different. This gives rise to a modulated structure in the (3+1)D superspace group Pnam(00g) with q=c{sub H}/c{sub G}=0.4775. The refinement converged to R(F) values below 0.055 for each partial structure using harmonic and Crenel functions. The compound is a bad metallic conductor and represents a new structure type composed of Dy{sup 3+} species embedded in a matrix of discrete planar FeC(C{sub 2}){sub 2} units and edge-sharing Fe(C{sub 2}){sub 4} tetrahedra forming infinite chains Fe(C{sub 2}){sub 4/2} running along the c axis. - Graphical abstract: Dy guest atoms (green) within an carbon octahedral channel of the modulated structure together with a tetrahedral Fe(C{sub 2}){sub 4/2} chain and triangular planar FeC(C{sub 2}){sub 2} groups in the crystal structure of Dy{sub 0.64}{l_brace}Dy{sub 5}[Fe{sub 2}C{sub 9}]{r_brace}. Highlights: Black-Right-Pointing-Pointer The first successful refinement of a large composite structure Dy{sub 0.64}{l_brace}Dy{sub 5}[Fe{sub 2}C{sub 9}]{r_brace}. Black-Right-Pointing-Pointer The presence of two kinds of complex anions with Fe as central atoms and C-ligands within this structure. Black-Right-Pointing-Pointer The oxidation state of the Fe atoms are low, they can be assigned Fe{sup I} and Fe{sup II}.

36 MATERIALS SCIENCE↗

Crystal structure and magnetic properties of NaCu{sup II}[(Cu{sup II}{sub 3}O)(PO{sub 4}){sub 2}Cl]

A new copper(II) oxide phosphate chloride, NaCu{sup II}[(Cu{sup II}{sub 3}O)(PO{sub 4}){sub 2}Cl], has been synthesized by flux synthesis. Single-crystal X-ray diffraction data show that the title compound crystallizes in the monoclinic system, space group P2{sub 1}/c (No. 14), with lattice parameters a=8.392(2) A, b=6.3960(10) A, c=16.670(2) A, {beta}=109.470(10) Degree-Sign , V=843.6(3) A{sup 3}, Z=4. The crystal structure is characterized by a complex chain of copper-centered polyhedra running along [0 1 0] which are connected by phosphate tetrahedra. The resulting three-dimensional polyhedra framework exhibits channels filled by additional copper and sodium atoms. Field and temperature dependent measurements of the specific heat and the magnetic susceptibility reveal low-dimensional magnetic behavior. The compound starts to decompose at 700 K under release of oxygen and evaporation of Cu{sup I}Cl as shown by simultaneous thermogravimetry and mass spectrometry. - Graphical abstract: The crystal structure of the new copper(II) phosphate chloride, NaCu{sup II}[(Cu{sup II}{sub 3}O)(PO{sub 4}){sub 2}Cl], exhibits linear chains of copper tetrahedra which show low-dimensional magnetic behavior proven by specific heat and magnetic susceptibility measurements. Highlights: Black-Right-Pointing-Pointer A new copper(II) oxide phosphate chloride, NaCu{sup II}[(Cu{sup II}{sub 3}O)(PO{sub 4}){sub 2}Cl], has been synthesized by flux synthesis. Black-Right-Pointing-Pointer The crystal structure comprises chains of Cu{sub 4}O tetrahedra. Black-Right-Pointing-Pointer Low-dimensional behavior has been proven by magnetic and specific heat measurements. Black-Right-Pointing-Pointer On heating, Cu{sup I}Cl and oxygen are released shown by simultaneous thermogravimetry and mass spectrometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mesoporous VN prepared by solid-solid phase separation

We recently reported a simple route to prepare mesoporous, conducting nitrides from Zn containing ternary transition metal oxides. Those materials result from the condensation of atomic scale voids created by the loss of Zn by evaporation, the replacement of 3 oxygen anions by 2 nitrogen anions, and in most cases the loss of oxygen to form water on the reduction of the transition metal. In this report, we present a different route to prepare mesoporous VN from K containing vanadium oxides. In this case, ammonolysis results in a multiphase solid product that contains VN, and other water soluble compounds such as KOH or KNH{sub 2}. On removing the K containing products by washing with degassed water, only mesoporous VN remains. VN materials with different pore sizes (10 nm-20 nm) were synthesized at 600 Degree-Sign C by varying the reaction time, while larger pores are obtained at higher temperatures (50 nm at 800 Degree-Sign C). - Graphical Abstract: The synthesis process of mesoporous VN from solid-solid separation. Highlights: Black-Right-Pointing-Pointer Mesoporous VN has been prepared by solid-solid phase separation. Black-Right-Pointing-Pointer Mesoporous VN was characterized by Rietveld refinement of PXRD, SEM and nitrogen physisorption. Black-Right-Pointing-Pointer VN materials with different pore sizes (10 nm-50 nm) were synthesized.

36 MATERIALS SCIENCE↗

Corrosion behavior of mesoporous transition metal nitrides

Transition metal nitrides (TMN) have many desirable characteristics such as high hardness and good thermal stability under reducing conditions. This work reports an initial survey of the chemical stability of mesoporous TMNs (TM=Nb, V, Cr and Ti) in water at 80 °C at neutral, acidic and alkaline pH. The mesoporous TMNs had specific surface areas of 25–60 m{sup 2}/g with average pore sizes ranging from 10 to 50 nm. The high surface areas of these materials enhance the rate of corrosion per unit mass over that of a bulk material, making detection of corrosion much easier. The products were characterized by Rietveld refinement of powder X-ray diffraction (PXRD) patterns and by scanning electron microscopy (SEM). Several nitrides have corrosion rates that are, within error, not distinguishable from zero (±1 Å/day). Of the nitrides examined, CrN appears to be the most corrosion resistant under acidic conditions. None of the nitrides studied are corrosion resistant under alkaline conditions. - Graphical abstract: Corrosion behavior of mesoporous transition metal nitrides (TM=Nb, V, Cr and Ti) in acidic and alkaline solutions at 80 °C for 2 weeks. Display Omitted - highlights: • Corrosion rates of mesoporous transition metal nitrides in aqueous solution is reported. • The mesoporous TMNs had surface areas of 25–60 m{sup 2}/g. • CrN is the most corrosion resistant under the conditions studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fractionation of critical metals from authentic acid mine drainage using a multi-bed immobilized amine sorbent setup: A field site study

Here for the first time reported, a flow-through multi-fixed bed immobilized amine/silica sorbent strategy was employed to fractionate purified critical metals from authentic acid mine drainage (AMD). The U.S. Department of Energy’s (DOE) National Energy Technology Laboratory’s (NETL) patent-pending Multi-functional Sorbent Technology (MUST) sorbents were used to recover critical metals from AMD at the Pittsburgh Botanic Garden (Pittsburgh, PA USA). By adjusting the AMD/sorbent ratio, we recovered > 80% of pure adsorbed Mn (by adsorbed metal weight) and >90% pure adsorbed Al at lab-scale. Further optimizing the weight hourly space velocity (WHSV) enhanced the rate of adsorbed Al recovery by over five times, justifying a field site test. After treating >100 L of AMD at the field site, the optimized polyamine/epoxysilane/aminosilane sorbent recovered approximately 0.7 wt% adsorbed Al at > 90% purity. A tangible amount of purified aluminum hydroxide [Al(OH) 3 ] and aluminum sulfate [Al 2 (SO 4 ) 3 ] solids were then recovered after eluting and precipitating the previously adsorbed metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Grain-resolved elastic strains in deformed copper measured by three-dimensional X-ray diffraction

This X-ray diffraction study reports the grain-resolved elastic strains in about 1000 randomly oriented grains embedded in a polycrystalline copper sample. Diffraction data were collected in situ in the undeformed state and at a plastic strain of 1.5% while the sample was under tensile load. For each grain the centre-of-mass position was determined with an accuracy of 10 {mu}m, the volume with a relative error of 20%, the orientation to 0.05{sup o} and the axial strain to 10{sup -4}. The elastic strain along the tensile direction exhibited a grain orientation dependence with grains within 20 deg. of <100> carrying the largest strain. While the width of the strain distribution for all grains did not change upon plastic loading, the grain-resolved data show a significant widening of the distribution evaluated for small subsets of initially elastically similar grains. This widening appears independent of the grain orientation. - Research Highlights: {yields} X-ray diffraction study of {approx} 1000 Cu grains during in situ plastic deformation. {yields} Grain averaged positions, orientations, volumes and elastic strain tensors derived. {yields} Both lattice rotation and axial strain depend on the initial grain orientation. {yields} Grains within 20{sup o} of <100> carry the largest elastic strain along the tensile axis. {yields} The results enable evaluation and development of polycrystal plasticity models.

36 MATERIALS SCIENCE↗

Evolution of weld metal microstructure in shielded metal arc welding of X70 HSLA steel with cellulosic electrodes: A case study

The microstructure of weld joint in X70 line pipe steel resulted from shielded metal arc welding with E6010 cellulosic electrodes is characterized using optical and electron microscopy. A range of ferritic morphologies have been identified ranging from polygonal inter- and intra-prior austenite grains allotriomorphic, idiomorphic ferrites to Widmanstätten, acicular and bainitic ferrites. Electron Backscatter Diffraction (EBSD) analysis using Image Quality (IQ) and Inverse Pole Figure (IPF) maps through superimposition of IQ and IPF maps and measurement of percentages of high and low angle grain boundaries was identified to assist in differentiation of acicular ferrite from Widmanstätten and bainitic ferrite morphologies. In addition two types of pearlitic structures were identified. There was no martensite detected in this weld structure. The morphology, size and chemistry of non-metallic inclusions are also discussed briefly. - Highlights: • Application of EBSD reveals orientation relationships in a range of phases for shielded metal arc welding of HSLA steel. • Nucleation sites of various ferrite morphologies identified • Formation of upper and lower bainite and their morphologies.

36 MATERIALS SCIENCE↗

Residual glass and crystalline phases in a barium disilicate glass–ceramic

Investigations about the presence of residual glass are scarce, despite its fundamental role in the crystallization kinetics and luminescent properties of barium disilicate glass–ceramics (BaO·2SiO{sub 2}–BS{sub 2}) with a quasi-stoichiometric composition. Non-isothermal (DTA/DSC) experiments have demonstrated that BS{sub 2} presents a polymorphic transformation, where the h-BS{sub 2} (monoclinic structure) phase is completely transformed in l-BS{sub 2} (orthorhombic structure) at temperatures higher than 1020 °C (10 °C/min). In this study, BS{sub 2} monolithic samples were heat-treated at 1000 °C (BS2-10) and 1100 °C (BS2-11) in a DSC furnace at a heating rate of 10 °C/min. In addition, the crystalline and amorphous phases were characterized and quantified by Transmission Electron Microscopy (TEM) and X-ray Diffraction (XRD) experiments, respectively. Although the complete polymorphic transformation from h-BS2 to l-BS2 was achieved at 1100 °C, our results demonstrated that BS2-11 contains a minor, albeit not negligible, amount of residual glass. - Highlights: • The crystalline and amorphous phases in a barium disilicate glass were characterized and quantified by XRD and TEM. • The BS2-10 sample was constituted by two main crystalline phases, which consists of 2 polymorphic forms: h-BS2 and l-BS2. • The orthorhombic BS2 phase (l-BS2) was predominant at 1100 °C. • The complete polymorphic transformation from h-BS2 to l-BS2 was achieved at 1100 °C. • Nevertheless, our XRD and TEM results demonstrated that BS2-11 contains a minor amount of residual glass.

36 MATERIALS SCIENCE↗

Extended investigation of sol aging effect on TiO2 electron transporting layer and performances of perovskite solar cells

Highlights: • Conditions of deposition of compact sol-gel TiO{sub 2} significantly influence the parameters of perovskite cells. • Sol aging originally considered as beneficial was proved to be adverse due to no repeatability, defects and residual water. • Free from such disadvantages TiO{sub 2} made from fresh sol can support as good cell parameters. • Roughness of transparent conductive oxide influences the optimal thickness of electron transporting layer. - Abstract: Organic−inorganic hybrid perovskites have created significant opportunities for low-cost and high-performance solar cells. The electron transporting layer (ETL) is one of the main components of the solar cell, which selectively transports electrons and at the same time acts as a barrier for holes. This paper focuses on the ETL composed of titanium dioxide deposited by sol-gel method. In particular, perovskite solar cells with ETL from aged titanium sol revealed significant differences of short circuit current which is 8% higher than their counterpart with ETL from fresh sol. Analysis of ETL morphology by atomic force microscopy combined with electrochemical impedance spectroscopy and optical properties measurements enabled to determine the source of this diversity. Additionally, the role of roughness of transparent electrode was indicated. The in-depth material analysis revealed some disadvantages of the ETL material, originally considered as supporting higher photovoltaic performance. The results indicated several problems associated with hardly controlled aging conditions, defects and presence of residual water, strongly advocate for TiO{sub 2} ETL form the fresh sol, which after optimization can guarantee the same good solar cell performance.

14 SOLAR ENERGY↗

Discontinuities in effective permeability due to fracture percolation

Motivated by a triaxial coreflood experiment with a sample of Utica shale where an abrupt jump in permeability was observed, possibly due to the creation of a percolating fracture network through the sample, we perform numerical simulations based on the experiment to characterize how the effective permeability of otherwise low-permeability porous media depends on fracture formation, connectivity, and the contrast between the fracture and matrix permeabilities. While a change in effective permeability due to fracture formation is expected, the dependence of its magnitude upon the contrast between the matrix permeability and fracture permeability and the fracture network structure is poorly characterized. We use two different high-fidelity fracture network models to characterize how effective permeability changes as percolation occurs. The first is a dynamic two-dimensional fracture propagation model designed to mimic the laboratory settings of the experiment. The second is a static three-dimensional discrete fracture network (DFN) model, whose fracture and network statistics are based on the fractured sample of Utica shale. Once the network connects the inflow and outflow boundaries, the effective permeability increases non-linearly with network density. In most networks considered, a jump in the effective permeability was observed when the embedded fracture network percolated. We characterize how the magnitude of the jump, should it occur, depends on the contrast between the fracture and matrix permeabilities. For small contrasts between the matrix and fracture permeabilities the change is insignificant. However, for larger contrasts, there is a substantial jump whose magnitude depends non-linearly on the difference between matrix and fracture permeabilities. A power-law relationship between the size of the jump and the difference between the matrix and fracture permeabilities is observed. In conclusion, the presented results underscore the importance of fracture network topology on the upscaled properties of the porous medium in which it is embedded.

36 MATERIALS SCIENCE↗

Conformal Locoregional Breast Irradiation with an Oblique Parasternal Photon Field Technique

We evaluated an isocentric technique for conformal irradiation of the breast, internal mammary, and medial supra-clavicular lymph nodes (IM-MS LN) using the oblique parasternal photon (OPP) technique. For 20 breast cancer patients, the OPP technique was compared with a conventional mixed-beam technique (2D) and a conformal partly wide tangential (PWT) technique, using dose-volume histogram analysis and normal tissue complication probabilities (NTCPs). The 3D techniques resulted in a better target coverage and homogeneity than did the 2D technique. The homogeneity index for the IM-MS PTV increased from 0.57 for 2D to 0.90 for PWT and 0.91 for OPP (both p < 0.001). The OPP technique was able to reduce the volume of heart receiving more than 30 Gy (V{sub 30}), the cardiac NTCP, and the volume of contralateral breast receiving 5 Gy (V{sub 5}) compared with the PWT plans (all p < 0.05). There is no significant difference in mean lung dose or lung NTCP between both 3D techniques. Compared with the PWT technique, the volume of lung receiving more than 20 Gy (V{sub 20}) was increased with the OPP technique, whereas the volume of lung receiving more than 40 Gy (V{sub 40}) was decreased (both p < 0.05). Compared with the PWT technique, the OPP technique can reduce doses to the contralateral breast and heart at the expense of an increased lung V{sub 20}.

61 RADIATION PROTECTION AND DOSIMETRY↗

Characterization of differences in calculated and actual measured skin doses to canine limbs during stereotactic radiosurgery using Gafchromic film

Accurate calculation of absorbed dose to the skin, especially the superficial and radiosensitive basal cell layer, is difficult for many reasons including, but not limited to, the build-up effect of megavoltage photons, tangential beam effects, mixed energy scatter from support devices, and dose interpolation caused by a finite resolution calculation matrix. Stereotactic body radiotherapy (SBRT) has been developed as an alternative limb salvage treatment option at Colorado State University Veterinary Teaching Hospital for dogs with extremity bone tumors. Optimal dose delivery to the tumor during SBRT treatment can be limited by uncertainty in skin dose calculation. The aim of this study was to characterize the difference between measured and calculated radiation dose by the Varian Eclipse (Varian Medical Systems, Palo Alto, CA) AAA treatment planning algorithm (for 1-mm, 2-mm, and 5-mm calculation voxel dimensions) as a function of distance from the skin surface. The study used Gafchromic EBT film (International Specialty Products, Wayne, NJ), FilmQA analysis software, a limb phantom constructed from plastic water Trade-Mark-Sign (fluke Biomedical, Everett, WA) and a canine cadaver forelimb. The limb phantom was exposed to 6-MV treatments consisting of a single-beam, a pair of parallel opposed beams, and a 7-beam coplanar treatment plan. The canine forelimb was exposed to the 7-beam coplanar plan. Radiation dose to the forelimb skin at the surface and at depths of 1.65 mm and 1.35 mm below the skin surface were also measured with the Gafchromic film. The calculation algorithm estimated the dose well at depths beyond buildup for all calculation voxel sizes. The calculation algorithm underestimated the dose in portions of the buildup region of tissue for all comparisons, with the most significant differences observed in the 5-mm calculation voxel and the least difference in the 1-mm voxel. Results indicate a significant difference between measured and calculated data extending to average depths of 2.5 mm, 3.4 mm, and 10 mm for the 1-mm, 2-mm, and 5-mm dimension calculation matrices, respectively. These results emphasize the importance of selecting as small a treatment planning software calculation matrix dimension as is practically possible and of taking a conservative approach for skin treatment planning objectives. One suggested conservative approach is accomplished by defining the skin organ as the outermost 2-3 mm of the body such that the high dose tail of the skin organ dose-volume histogram curve represents dose on the deep side of the skin where the algorithm is more accurate.

61 RADIATION PROTECTION AND DOSIMETRY↗

Reducing the low-dose lung radiation for central lung tumors by restricting the IMRT beams and arc arrangement

To compare the extent to which 7 different radiotherapy planning techniques for mediastinal lung targets reduces the lung volume receiving low doses of radiation. Thirteen non-small cell lung cancer patients with targets, including the mediastinal nodes, were identified. Treatment plans were generated to both 60- and 74-Gy prescription doses using 7 different planning techniques: conformal, hybrid conformal/intensity-modulated radiation treatment (IMRT), 7 equidistant IMRT beams, 2 restricted beam IMRT plans, a full (360 Degree-Sign ) modulated arc, and a restricted modulated arc plan. All plans were optimized to reduce total lung V5, V10, and V20 volumes, while meeting normal tissue and target coverage constraints. The mean values for the 13 patients are calculated for V5, V10, V20, V{sub ave}, V0-20, and mean lung dose (MLD) lung parameters. For the 74-Gy prescription dose, the mean lung V10 was 42.7, 43.6, 48.2, 56.6, 57, 55.8, and 54.1% for the restricted {+-}36 Degree-Sign IMRT, restricted modulated arc, restricted {+-}45 Degree-Sign IMRT, full modulated arc, hybrid conformal/IMRT, equidistant IMRT, and conformal plans, respectively. A similar lung sparing hierarchy was found for the 60-Gy prescription dose. For the treatment of central lung targets, the {+-}36 Degree-Sign restricted IMRT and restricted modulated arc planning techniques are superior in lowering the lung volume treated to low dose, as well as in minimizing MLD, followed by the {+-}45 Degree-Sign restricted IMRT plan. All planning techniques that allow the use of lateral or lateral/oblique beams result in spreading the low dose over a higher lung volume. The area under the lung dose-volume histogram curve below 20 Gy, V0-20, is proposed as an alternative to individual V{sub dose} parameters, both as a measure of lung sparing and as a parameter to be minimized during IMRT optimization.

61 RADIATION PROTECTION AND DOSIMETRY↗

Technique for comprehensive head and neck irradiation using 3-dimensional conformal proton therapy

Owing to the technical and logistical complexities of matching photon and proton treatment modalities, we developed and implemented a technique of comprehensive head and neck radiation using 3-dimensional (3D) conformal proton therapy. A monoisocentric technique was used with a 30-cm snout. Cervical lymphatics were treated with 3 fields: a posterior-anterior field with a midline block and a right and a left posterior oblique field. The matchline of the 3 cervical nodal fields with the primary tumor site fields was staggered by 0.5 cm. Comparative intensity-modulated photon plans were later developed for 12 previously treated patients to provide equivalent target coverage, while matching or improving on the proton plans' sparing of organs at risk (OARs). Dosimetry to OARs was evaluated and compared by treatment modality. Comprehensive head and neck irradiation using proton therapy yielded treatment plans with significant dose avoidance of the oral cavity and midline neck structures. When compared with the generated intensity-modulated radiation therapy (IMRT) plans, the proton treatment plans yielded statistically significant reductions in the mean and integral radiation dose to the oral cavity, larynx, esophagus, and the maximally spared parotid gland. There was no significant difference in mean dose to the lesser-spared parotid gland by treatment modality or in mean or integral dose to the spared submandibular glands. A technique for cervical nodal irradiation using 3D conformal proton therapy with uniform scanning was developed and clinically implemented. Use of proton therapy for cervical nodal irradiation resulted in large volume of dose avoidance to the oral cavity and low dose exposure to midline structures of the larynx and the esophagus, with lower mean and integral dose to assessed OARs when compared with competing IMRT plans.

61 RADIATION PROTECTION AND DOSIMETRY↗

Volumetric analysis and mesh generation of real and artificial microstructural geometries

Producing a viable finite element mesh of realistic microstructural structural geometry is a critical step in analyzing the thermo-mechanical behavior of complex multi-material composites. Advancements in imaging technology such as micro computed tomography have allowed modelers to access high resolution mesoscale geometries for direct numerical simulation. However, converting from voxel based 3D images to usable finite element meshes has been challenging. A robust method including algorithms and software scripts for generating finite element meshes from 3D imaged microstructures is presented in this paper. It includes a routine for inserting cohesive elements around material interfaces to enable modeling of interface properties including delamination and damage. The algorithms and procedures presented in this method leverage currently available software packages for processing surface based geometry into volume based meshes. In addition to converting real geometry from physical imaging systems, algorithms for producing numerically generated and statistically equivalent microstructural geometry are also included. These artificial microstructures can be a valuable resource for modelers when physical specimens do not exist or are limited in quantity: Method establishes a workflow from voxel data to viable finite element mesh including interface information, and Includes a method for synthetic geometry generation based on metrics from real microstructures.

36 MATERIALS SCIENCE↗