SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The configuration of the user transponder on the Tracking and Data Relay satellite is described. The subjects discussed are: (1) transponder concepts and trades, (2) ground station design, (3) antenna configurations for ground equipment, (4) telemetry facilities, (5) signal categories, and (6) satellite tracking.
The computer program for the real-time acquisition and tracking program uses a variety of filtering algorithms including an extended Kalman filter to derive real-time orbit determination (position-velocity state vectors) from shipboard tracking and navigation data. Results from Apollo missions are given to show that orbital parameters can be estimated quickly and accurately using these methods.
Optical microscopic studies of two intermediate pieces of 72255, located 1 to 3 cm below the surface, indicate an upper limit to the track exposure age of 15 to 20 m.y. A striking feature of the track studies of breccias 72255 and 72275 is the peculiar etching behavior of many of the feldspar and olivine crystals. After standard etching procedures, crystal surfaces are frequently irregular and bumpy, presumably owing to nonuniform dissolution of the surface. Although this effect was not observed in feldspars or olivines in samples from other missions, it is apparently widespread among Apollo 17 samples.
A multiple phase modulated carrier tracking loop for use in a frequency shift keying system is described in which carrier tracking efficiency is improved by making use of the decision signals made on the data phase transmitted in each T-second interval. The decision signal is used to produce a pair of decision-feedback quadrature signals for enhancing the loop's performance in developing a loop phase error signal.
The following activities in Smithsonian Astrophysical Observatory's (SAO) earth-dynamics programs are covered: (1) satellite-tracking network operations; (2) satellite geodesy and geophysics programs; (3) atmospheric research. Approximately 46,000 successful range measurements were acquired by the SAO laser stations in Peru, South Africa, Brazil, and Arizona. The Peole satellite-tracking campaign conducted in conjunction with the Centre National d'Etudes Spatiales was completed in August 1973. The SAO network obtained 4482 validated returns of 310 arcs of Peole. These data are of particular value for obtaining more accurate gravity-field and zonal-harmonics coefficients.
The feasibility of employing satellite to satellite tracking in lieu of ground based tracking to satisfy the orbit determination requirements of the GEOS-C mission was studied. It is shown that with proper estimation procedures it is possible to obtain from S.S.T. data a GEOS-C orbit whose altitude error averages about 1 meter. The usefulness of this type for geopotential recovery is also indicated.
The research indicates that extreme caution must be exercised in converting cloud velocities into winds. The motion of fair-weather cumuli obtained by tracking their shadows over Springfield, Missouri revealed that the standard deviation in the individual cloud motion is several times the tracking error. The motion of over-ocean cumuli near Barbados clearly indicated the complicated nature of cumulus velocities. Analysis of whole-sky images obtained near Tampa, Florida failed to show significant continuity and stability of cumulus plumes, less than 0.3 mile in diameter. Cumulus turrets with 0.3 to 2 mile in size appear to be the best target to infer the mean wind within the subcloud layers. Cumulus or stratocumulus cells consisting of x number of turrets do not always move with wind. The addition and deletion of turrets belonging to a specific cell appear to be the cause of the erratic motion of a tracer cell. It may by concluded that the accuracy of wind estimates is unlikely to be better than 2m/sec unless the physical and dynamical characteristics of cumulus motion is futher investigated.
The concept of nonlinear coherence employed in carrier tracking to improve telecommunications efficiency is disclosed. A generic tracking loop for a coherent receiver is shown having seven principle feedback signals which may be selectively added and applied to a voltage controlled oscillator to produce a reference signal that is phase coherent with a received carrier. An eighth feedback signal whose nonrandom components are coherent with the phase detected and filtered carrier may also be added to exploit the sideband power of the received signal. A ninth feedback signal whose nonrandom components are also coherent with the quadrature phase detected and filtered carrier could be additionally or alternatively included in the composite feedback signal to the voltage controlled oscillator.
The Tracking and Data Relay Satellite with a set of circularly-polarized, amplitude-sensing monopulse patterns suitable for acquiring and tracking user spacecraft at Ku-band (15.0 GHz) is discussed. The possibility of increasing the less than 0.4-degree half-power beamwidth of the data beam to almost 1.0 degree during the acquisition phase is predicated on the use of feeds situated in the first bright-ring of the Airy diffraction structure. A complex-vector simulation equivalent to the Kirchhoff-Kottler or Franz formulations is used to compute transmitted and received field information for a dual-reflector (Cassegrain) antenna configuration in a three-dimensional space.
The satellite to satellite tracking data unique processing considerations are presented. The strategy to be employed in the application of data processing routines to the ATS-F/GEOS-C satellite to satellite tracking experiment is described. When these considerations are included, studies, analysis and simulations predict an orbital position uncertainty of less than 15 meters and a velocity uncertainty of less than 1.5 millimeters per second.
The earth physics satellite systems error analysis program was applied to the problem of predicting the relative accuracy of station position determinations under varying orbital and observing geometries. The reference case consists of nine ground stations extending over 1500 km which lasers ranged to a LAGEOS satellite, with simultaneous Doppler tracking from a geosynchronous satellite for 16 days. Eleven variations from the reference case were tested. The results showed little sensitivity to whether the LAGEOS altitude is 3700 or 5690 km. More significant were the high inclination, and that LAGEOS was tracked by a geosynchronous satellite.
Plans for a new way of providing tracking and data acquisition support for future earth orbital missions, the Tracking and Data Relay Satellite System (TDRSS), are reviewed. This system is to become the principal support facility for all NASA R&D missions below about 5000 km altitude. Current plans call for a 2-satellite system that is to provide upwards of 85% coverage of all orbits above 200 km and 100% coverage above 1200 km.
We report a whole-rock uranium method in which the polished sample and track detector are separated in a vacuum chamber. Irradiation with thermal neutrons induces uranium fission in the sample, and the detector records the integrated fission track density. Detection efficiency and geometric factors are calculated and compared with calibration experiments.
A tracking polarimeter implemented on the 64-m NASA/JPL paraboloid antenna at Goldstone, Calif., is described. Its performance is analyzed and compared with measurements. The system was developed to measure Faraday rotation in the solar corona of the telemetry carrier from the Pioneer VI spacecraft as it was occulted by the sun. It also measures rotation in the earth's ionosphere and is an accurate method of determining spacecraft orientation. The new feature of this system is its use of a pair of quarter-wave plates to allow the synthesis of a rotating feed system, while requiring the rotation of only a single section of waveguide. Since the polarization sensing is done at RF and the receiver operates essentially as a null detector, the system's accuracy is superior to other polarization tracking schemes. In addition, the antenna size and maser preamplifier provide unsurpassed sensitivity. The associated instrumentation used in the Pioneer VI experiment is also described.
An extensive effort was undertaken to edit Mariner 10 radiometric tracking data. Interactive computer graphics were used for the first time by an interplanetary mission to detect blunder points and spurious signatures in the data. Interactive graphics improved the former process time by a factor of 10 to 20, while increasing reliability. S/X dual Doppler data was used for the first time to calibrate charged particles in the tracking medium. Application of the charged particle calibrations decreased the orbit determination error for a short data arc following the 16 March 1974 maneuver by about 80%. A new model was developed to calibrate the earth's troposphere with seasonal adjustments. The new model has a 2% accuracy and is 5 times better than the old model.
The principles of operation of Very Long Baseline Interferometry (VLBI) are discussed. The application of VLBI techniques for tracking lunar rover vehicles during the Apollo 16 and 17 missions is reported. A map of the Apollo 16 lunar rover track is provided. Charts are developed to show the incremental motion of the lunar vehicle during the mission.
The space shuttle rendezvous radar has a requirement to track cooperative and non-cooperative targets. For this reason the Lunar Module (LM) Rendezvous Radar was modified to incorporate the capability of tracking a non-cooperative target. The modifications are discussed. All modifications except those relating to frequency diversity were completed, and system tests were performed to confirm proper performance in the non-cooperative mode. Frequency diversity was added to the radar and to the special test equipment, and then system tests were performed. This last set of tests included re-running the tests of the non-cooperative mode without frequency diversity, followed by tests with frequency diversity and tests of operation in the original cooperative mode.
The stowage list and hardware tracking system, a computer based information management system, used in support of the space shuttle orbiter stowage configuration and the Johnson Space Center hardware tracking is described. The input, processing, and output requirements that serve as a baseline for system development are defined.