Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Subsurface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

The role of igneous sills in shaping the Martian uplands

Relations among geologic units and landforms suggest that igneous sills lie beneath much of the intercrater and intracrater terrain of the Martian uplands. The igneous rocks crop out along the upland-lowland front and in crater floors and other depressions that are low enough to intersect the sill's intrusion horizons. It is suggested that heat from the cooling sills melted some of the ice contained in overlying fragmental deposits, creating valley networks by subsurface flow of the meltwater. Terrains with undulatory, smooth surfaces and softened traces of valleys were created by more direct contact with the sills. Widespread subsidence following emplacement of the sills deformed both them and the nonvolcanic deposits that overlie them, accounting for the many structures that continue from ridged plains into the hilly uplands. Crater counts show that the deposit that became valleyed, softened, and ridged probably began to form (and to acquire interstitial ice) during or shortly after the Middle Noachian Epoch, and continued to form as late as the Early Hesperian Epoch. The upper layers of this deposit, many of the visible valleys, and the ridged plains and postulated sills all have similar Early Hesperian ages. Continued formation of valleys is indicated by their incision of fresh-appearing crater ejecta. The dependence of valley formation on internal processes implies that Mars did not necessarily have a dense early atmosphere or warm climate.

Wilhelms, D. E.↗

On the source of cross-grain lineations in the central Pacific gravity field

The source of cross-grain lineations in marine gravity field observed in central Pacific was investigated by comparing multiple collinear gravity profiles from Geosat data with coincident bathymetry profiles, in the Fourier transform domain. Bathymetric data were collected by multibeam sonar systems operating from two research vessels, one in June-August 1985, the other in February and March 1987. The results of this analysis indicate that the lineations are superficial features that appear to result from a combination of subsurface and surface loads supported by a thin (2 km to 5 km) lithosphere.

Mcadoo, David C.↗

Effective elastic thicknesses of the lithosphere and mechanisms of isostatic compensation in Australia

The isostatic compensation of Australia is investigated using an isostatic model for the Australian lithosphere that assumes regional compensation of an elastic plate which undergoes flexure in response to surface and subsurface loading. Using the coherence between Bouguer gravity and topography and two separate gravity/topography data sets, it was found that, for the continent as a whole, loads with wavelengths above 1500 km are locally compensated. Loads with wavelengths in the range 600-1500 km are partially supported by regional stresses, and loads with wavelengths less than 600 km are almost entirely supported by the strength of the lithosphere. It was found that the predicted coherence for a flexural model of a continuous elastic plate does not provide a good fit to the observed coherence of central Australia. The disagreement between model and observations is explained.

Zuber, Maria T.↗

A petrographic thin sectioning technique for evaluating composite materials

Petrographic thin sectioning by a low-speed diamond saw has been used in conjunction with transmission polarized light microscopy for the characterization of the microstructure and deformation mechanisms of a variety of polymer systems. It has proven possible by these means to study three types of thermoplastic matrices for composite applications: PEEK, BPA-based polycarbonate (PC), and a rubber-modified PC. The reinforcing fibers for these matrices were in all cases AS4 carbon fibers, unidirectionally arrayed. Superior analyzability of matrix morphology and subsurface fracture processes is achieved by thin sectioning.

Parker, D. S.↗

Early Martian environments - The antarctic and other terrestrial analogs

The comparability of the early environments of Mars and earth, and the biological evolution which occurred on early earth, motivates serious consideration of the possibility of an early Martian biota. Environments which could have contained this early Martian life and which may presently contain evidence of this former life include aquatic, ice, soil, and rock habitats. Several analogs of these potential early Martian environments, which can provide useful information in searching for extinct life on Mars, are currently available for study on earth. These terrestrial analogs include the perennially ice-covered lakes and sandstone rocks in the polar deserts of Antarctica, surface of snowfields and glaciers, desert soils, geothermal springs, and deep subsurface environments.

Wharton, R. A., Jr.↗

The fatigue damage behavior of a single crystal superalloy

The uniaxial fatigue behavior of a single crystal superalloy, PWA 1480, is described. Both monotonic tensile and constant amplitude fatigue tests were conducted at room temperature, in an effort to assess the applicability of polycrystalline-based fatigue life prediction methods to a single crystal superalloy. The observed constant amplitude behavior correlated best using a stress-based life criterion. Nearly all specimens failed at surface or slightly subsurface microporosity; this is thought to be responsible for the unusually large amount of scatter in the test results. An additional term is developed in the stress-life equation for the purpose of accounting for the effect of microporosity on fatigue life. The form chosen is a function of the effective area of the failure-producing microporosity projected on a plane perpendicular to the loading axis, as well as the applied stress. This additional term correlated the data to within factors of two on life. Although speculative, extrapolation of the microporosity relation to zero micropore area indicates that approximately an order of magnitude improvement in fatigue life should result.

Mcgaw, Michael A.↗

Io meteorology - How atmospheric pressure is controlled locally by volcanos and surface frosts

The present modification of the Ingersoll et al. (1985) hydrodynamic model of the SO2 gas sublimation-driven flow from the day to the night side of Io includes the effects of nonuniform surface properties noted in observational studies. Calculations are conducted for atmospheric pressures, horizontal winds, sublimation rates, and condensation rates for such surface conditions as patchy and continuous frost cover, volcanic venting, surface temperature discontinuities, subsurface cold trapping, and the propagation of insolation into the frost. While pressure is found to follow local vapor pressure away from the plumes, it becomes higher inside them.

Ingersoll, Andrew P.↗

Solar and stellar flares - Questions and problems

Topics which can be discussed quantitatively for both solar and stellar flares are reviewed. Physical conditions in stellar flares are briefly discussed and radio flares are considered, emphasizing the role of maser process in such flares. The penetration of particle beams and photons is examined, addressing the question whether an electron beam can penetrate to the chromosphere of a flare star. The existence of momentum balance in stellar flares is investigated, and solar-stellar differences regarding subsurface source of flare power are described. The significance for the interstellar medium of the flare star mass loss rate is addressed, and differences in mass loss mechanism between the sun and flare stars are discussed. Reconnection modeling of flare energy release is studied, and the geometrical structure of the flare site in a stellar atmosphere is described. The connection between coronal heating and flares is considered, and the origins of flare magnetic fields are discussed.

Mullan, D. J.↗

How deep can one see into the sun?

Conventional wisdom dictates that the 1.642-micron H(-) opacity minimum is the best window to the depths of the solar photosphere. However, the violet continuum near 0.4 micron exhibits a larger intensity response to small thermal perturbations at depth, and thus might offer an even better view of the subsurface roots of granulation cells and magnetic flux tubes.

Ayres, Thomas R.↗

The infrared spectrum of Comet Bradfield (1987s) and the silicate emission feature

Infrared (1-20 microns) observations of Comet Bradfield (1987s) from three observatories are reported. Silicate emission is prominent in all the data, from heliocentric distance r = 0.87 to 1.45 AU. A CVF spectrum at r = 1.45 AU shows a peak at 11.3 microns identified as crystalline olivine; the spectral shape is similar to that in Halley. Dust optical properties are similar to those of the grains in Halley's jets. Dust production rate near perihelion was about 10 to the 6th g/s and varied as N exp-2. It is suggested that some differences in grain properties among comets could result from difference in the thermal history of the nuclear surface and the relative fraction of the dust particles originating in the subsurface icy layer versus the devolatilized mantle.

Hanner, M. S.↗

A rough-surface thermophysical model for airless planets

A model for determining diurnal temperatures in spherical-section depressions and which encompasses both subsurface heat-flow and direct and scattered sunlight effects is presently applied to the disk-integrated thermal emission of a rough planetary surface with nonzero thermal inertia. Attention is given to the variation with roughness and thermal inertia of the beaming parameter eta, which characterizes zero-phase thermal emission by comparison with a smooth, nonrotating body and is almost independent of albedo for a given surface roughness. The thermal phase curve of Ceres is noted to be well matched by the model features of (1) prograde rotation, (2) 44-deg rms surface slope, and (3) a thermal inertia that is 30 percent of the lunar value.

Spencer, John R.↗

Estimates of the zonal slope and seasonal transport of the Atlantic North Equatorial Countercurrent

Data from six inverted echo sounder moorings and the Geosat satellite altimeter are used to examine the seasonal variability of sea surface elevation. Monthly sea level maps are constructed using a contemporaneous subsurface temperature survey to provide a reference sea level field. The maps are then used to describe the origin and structure of the western tropical Atlantic North Equatorial Countercurrent (NECC) during a two-year period beginning in November 1987. The data reveal a zonal current which is confined between 3 deg N and 9 deg N with a typical width of 300 km. The NECC flows strongly eastward during November and December 1986 and May 1987 through January 1988. The reappearance of the current is then delayed until August, but the current flows strongly from August until the end of the record in October 1988. Volume transport is estimated for the two-year period from surface elevation by approximating the vertical structure of the ocean as a two-layer fluid. It is found that the NECC has a maximum transport of 40 x 10 to the 6th cu m/s at 38 deg W.

Carton, James A.↗

Helioseismic imaging of sunspots at their antipodes

Recent work by Braun et al. (1988) has shown that sunspots absorb helioseismic waves. It is proposed that sunspot absorption causes a seismic deficit that should be imaged at the antipode of the sunspot. If these images are observable, it should be possible to produce seismic maps of magnetic regions on the far side of the sun. Diagnostic applications would include lifetimes of higher-frequency modes, and possibly rotation of the solar interior and detection of subsurface magnetic structure. Elements of the theory of seismic imaging are outlined. The extention of acoustic holography to solar interior diagnostics in the context of antipodal imaging is proposed.

Lindsey, Charles↗

Martian impact craters - Correlations of ejecta and interior morphologies with diameter, latitude, and terrain

An effort is made to establish the ability of a correlation between crater morphology and latitude, diameter, and terrain, to discriminate among the effects of impact energy, atmosphere, and subsurface volatiles in 3819 larger-than-8 km diameter craters distributed over the Martian surface. It is noted that changes in ejecta and interior morphology correlate with increases in crater diameter, and that while many of the interior structures exhibit distributions interpretable as terrain-dependent, central peak and peak ring interior morphologies exhibit minimal relationships with planetary properties.

Barlow, Nadine G.↗

Possible Martian brines - Radar observations and models

The 1971 and 1973 Goldstone 12.6-cm radar observations of Mars are separate data sets which include reflectivity as a function of latitude, longitude, and season. It has been argued that secular reflectivity variations of Mars' surface are indicated by the data and that shallow subsurface melting is the causal mechanism most compatible with the observations; however, the melting hypothesis conflicts with accepted notions of the state and distribution of water on Mars. The data are examined to identify temporal and spatial domains within which statistically significant changes in measured reflectivity are clustered. Brines which might satisfy the best supported reflectivity variations are out of equilibrium with the chemical megaenvironment. It is unclear whether such a brine, if emplaced in the Martian regolith at a depth shallow enough to affect the radar reflectivity, could survive even a single freeze-thaw cycle. Some combination of unique scattering properties or some as yet unidentified process other than melting is responsible for any genuine reflectivity variations.

Zent, Aaron P.↗

Oceanic upper mixed layer depth determination by the use of satellite data

A method has been developed to determine the oceanic daily mean mixed layer depth from satellite observations and a mixed layer thermal inertia (MLTI) model. The algorithms were developed to use remotely-sensed values of sea surface temperature, albedo, and surface wind speeds to calculate the thermal inertia and to predict changes in subsurface diurnal mixed layer depth. The MLTI model, based on a mixed layer model of the upper ocean, has been used to simulate the diurnal mixing process and thermal inertia distribution in the Sargasso Sea around 34 deg N, 70 deg W. Sea surface temperature and albedo have been obtained from the NOAA7-AVHRR images. Surface wind speeds have been derived from the Scanning Multichannel Microwave Radiometer (SMMR) aboard Nimbus 7. Image processing was performed for images gathered between June and July 1982. The daily mean mixed layer depths predicted by the MLTI model agree well with data gathered at the LOTUS mooring located in the Sargasso Sea. This suggests that vertical mixing is the dominant physical process that controls the thermal inertia distribution in the midocean, far from major current systems, and that remote sensing is a promising tool to study such upper ocean processes.

Yan, Xiao-Hai↗

Salt Filler For Making Covered Channels

In simple fabrication technique, metal salts used to create such subsurface channels as those for coolant in metallic heat exchanger. Layer of metal deposited on structure by vacuum plasma spraying, sealing channels. Metal salt or salt mixture has melting temperature higher than those of waxes and aluminum and withstands high temperature of plasma spraying. After plasma spraying, salt filler dissolved quickly and easily and flushed away with water or other appropriate solvent, leaving behind covered channels.

Mckechnie, Timothy N.↗

Autonomous Martian flying rover

A remotely programmable, autonomous flying rover is proposed to extensively survey the Martian surface environment. A Mach .3, solar powered, modified flying wing could cover roughly a 2000 mile range during Martian daylight hours. Multiple craft launched from an orbiting mother ship could provide near-global coverage. Each craft is envisioned to fly at about 1 km above the surface and measure atmospheric composition, pressure and temperature, map surface topography, and remotely penetrate the near subsurface looking for water (ice) and perhaps evidence of life. Data collected are relayed to Earth via the orbiting mother ship. Near surface guidance and control capability is an adaptation of current cruise missile technology. A solar powered aircraft designed to fly in the low temperature, low density, carbon dioxide Martian atmosphere near the surface appears feasible.

Source record↗