Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solvent Free”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Lithium Nucleation of Anode-Free Solid-State Batteries with a Dry Compressible Interlayer

Anode-free lithium batteries offer promising advantages, including increased energy density and the ability to address common mechanistic failures within the cell, thus increasing safety. One way that can make this possible is to control lithium nucleation. This could be achieved by reducing the overpotential required and implanting lithophilic nucleation sites in an anodic interlayer to aid in lithium ion transport and plating. The concept has been utilized in solid-state battery systems where electrolytes are solids with further improved safety and structural longevity. In this presentation, we discuss the use of a silver-holey graphene-based anodic interlayer that can be fabricated via direct dry compression without the use of solvent or binder. The addition of silver to the holey graphene matrix creates a route to lithium plating via a lower-energy intermediate. This idea is supported by the presence of a lithium-silver alloy that forms during the activation step. It is understood that the embedded silver acts as a nucleation site for lithium ions, thereby assisting in even plating. This control, combined with the added cushion of the holey graphene itself, can help reduce dendrite formation, ultimately increasing the safety and lifetime of the solid-state batteries.

Solid state batteries↗
DOE OSTI2024

Solution-based electrical doping of organic photovoltaics with non-fullerene acceptors facilitated by solvent vapor pre-treatment

Solution-based electrical doping of organic semiconductors using 12-molybdophosphoric acid (PMA) hydrate has been shown to allow p-type doping of conjugated polymers over a limited depth from the surface, enabling the fabrication of organic solar cells with a simplified device architecture. However, the doping level of certain conjugated polymers using PMA was found to be limited by the polymer film volume. Here, we report a modified PMA doping technique based on film volume expansion that is applicable to device fabrication, leading to hole-collecting layer-free non-fullerene organic photovoltaic devices, which exhibit a comparable photovoltaic performance to those with a commonly evaporated MoO3 hole-collecting layer.

Materials Science↗
DOE OSTI2022

Economic Extraction, Recovery and Upgrading of Rare Earth Elements from Coal-Based Resources (Final Report)

The overall objective of this project is to produce a rare earth elements product with greater than 8% rare earth elements from coal-based resources using an economically viable and environmentally benign processing methodology. The objective of the coal processing work will be to acquire appropriate coal feed and produce a viable clean coal product, a concentrated REE feed stream, and a pyrite stream (where available) that can be used to enhance leaching. The objective of the bio-oxidation portion of the project is to utilize bacteria to oxidize sulfide minerals and ferrous ions to ferric ions to accelerate leaching and remove the sulfides to prevent future acid mine drainage and related liabilities. The objective of the solution conditioning work is to remove iron and control leaching solution conditions to facilitate extraction of REEs without significant thorium extraction. The objective of the column leaching work is to engineer/model and simulate heap leaching to demonstrate low-cost extraction of REEs from coal-based resources. The objective of the solvent extraction work is to selectively extract and recover through controlled stripping of REEs that are solubilized through leaching. The objective of the precipitation portion of the project is to recover the REEs from the solvent extraction stripping solutions and dry them to achieve the final product of rare earth elements that is > 8 % REEs. The objective of the technical, economic, and environmental analysis is to determine the overall viability of the processing approach that is demonstrated in this project

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2014

Alkylpurine Glycosylase D Employs DNA Sculpting as a Strategy to Extrude and Excise Damaged Bases

Alkylpurine glycosylase D (AlkD) exhibits a unique base excision strategy. Instead of interacting directly with the lesion, the enzyme engages the non-lesion DNA strand. AlkD induces flipping of the alkylated and opposing base accompanied by DNA stack compression. Since this strategy leaves the alkylated base solvent exposed, the means to achieve enzymatic cleavage had remained unclear. We determined a minimum energy path for flipping out a 3-methyl adenine by AlkD and computed a potential of mean force along this path to delineate the energetics of base extrusion. We show that AlkD acts as a scaffold to stabilize three distinct DNA conformations, including the final extruded state. These states are almost equivalent in free energy and separated by low barriers. Thus, AlkD acts by sculpting the global DNA conformation to achieve lesion expulsion from DNA. N-glycosidic bond scission is then facilitated by a backbone phosphate group proximal to the alkylated base.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Perspectives on the relationship between materials chemistry and roll-to-roll electrode manufacturing for high-energy lithium-ion batteries

As lithium-ion battery (LIB) active material and cell manufacturing costs continue to drop with wider adoption of electric vehicles, electrode and cell processing costs remain too high in terms of reaching the ultimate U.S. Department of Energy (DOE) cell cost target of $80/kWh. This paper primarily covers major materials chemistry advancements made over the last 10 years at Oak Ridge National Laboratory (ORNL) in the space of advanced manufacturing science for LIBs with the aim of simultaneously meeting the ultimate cost target, 500 Wh/kg gravimetric energy density, 10-15-min fast charge times, and 1000 deep discharge cycles. Aqeous electrode processing with a variety of active anode and cathode materials is now a standard procedure at the DOE Battery Manufacturing R&D Facility at ORNL (BMF), including the latest processes developed for Ni-rich cathodes. New results on cobalt-free LiNi 0.8 Fe 0.1 Al 0.1 O 2 (NFA 811) are also included and discussed in an electrode processing advantage context. In addition, colloidal processing advancements have been made for Si/C composite anodes for achieving >600 mA h/g capacities. Optimization of electrode coating parameters and drying protocols have been completed, which has elucidated how key processing variables need to be changed when parameters such as slurry solids loading, solvent type, and wet electrode thickness are changed. ORNL has also increased the line speeds at which thick cathodes can be processed using ultra-fast electron beam (EB) curing and substantially decreased formation cycling times to <1 day. Finally, key details of these advancements are discussed in the context of materials chemistry and process-property-performance relationships.

25 ENERGY STORAGE↗
DOE OSTI2024

Hyperconjugation-controlled molecular conformation weakens lithium-ion solvation and stabilizes lithium metal anodes

Tuning the solvation structure of lithium ions via electrolyte engineering has proven effective for lithium metal (Li) anodes. Further advancement that bypasses the trial-and-error practice relies on the establishment of molecular design principles. Expanding the scope of our previous work on solvent fluorination, we report here an alternative design principle for non-fluorinated solvents, which potentially have reduced cost, environmental impact, and toxicity. By studying non-fluorinated ethers systematically, we found that the short-chain acetals favor the [gauche, gauche] molecular conformation due to hyperconjugation, which leads to weakened monodentate coordination with Li + . The dimethoxymethane electrolyte showed fast activation to >99% coulombic efficiency (CE) and high ionic conductivity of 8.03 mS cm -1 . The electrolyte performance was demonstrated in anode-free Cu$∥$LFP pouch cells at current densities up to 4 mA cm -2 (70 to 100 cycles) and thin-Li$∥$high-loading-LFP coin cells (200–300 cycles). Overall, we demonstrated and rationalized the improvement in Li metal cyclability by the acetal structure compared to ethylene glycol ethers. We expect further improvement in performance by tuning the acetal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Characterizing the Mechanisms of Ca and Mg Carbonate Ion-Pair Formation with Multi-Level Molecular Dynamics/Quantum Mechanics Simulations

The carbonate minerals of Ca and Mg are abundant throughout the lithosphere and have recently garnered significant research interest as possible long-term carbon sinks in the sequestration of atmospheric carbon dioxide. Nonetheless, an understanding of the atomic-level processes comprising their mineralization remains limited. Furthermore, we characterize and contrast the mechanisms of contact ion-pair formation in aqueous Ca and Mg carbonate systems, which represents the most fundamental step leading to the formation of their mineral solids. Utilizing multilevel embedded correlated wavefunction-based ab initio molecular dynamics/quantum mechanics simulations, we characterize not only the dynamics of these processes but also factors arising from the electronic structure of the involved species, revealing further details of the fundamentally different mechanisms for the interconversion between the contact ion-pairs and solvent-shared ion-pairs of Ca versus Mg carbonate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Measuring Solvation Interactions of Deep Eutectic Solvents Formed by Metal Chlorides and an Imidazolium Salt by Inverse Gas Chromatography

Deep eutectic solvents (DESs) represent a class of solvents that offer a number of advantages including minimal toxicity, affordability, low vapor pressure, and simple, environmentally friendly preparation methods. They have found utility in areas, such as gas absorption, metal plating, and extractions. However, the relationship between their solvation properties and chemical composition remains poorly understood. In this study, a broad range of Type I DESs composed of metal chlorides and an imidazolium salt were prepared, employed as gas chromatographic stationary phases, and characterized using the Abraham solvation parameter model by inverse gas chromatography. The Abraham solvation parameter model allows for the study of DES solvation properties and the effects of varying structural components on system constants using a linear-free energy relationship. The DESs were investigated by systematically varying their composition, including the type of metal chloride and the molar ratio between the metal chloride and the imidazolium salt. The results show that hydrogen bond acidity, hydrogen bond basicity, and dipolarity/polarizability interactions are strongly influenced by the type of metal chloride within the DES and the ratio of metal chloride to imidazolium salt in the eutectic mixture. Furthermore, a column pretreatment procedure is presented that enables the effective coating of highly polar DESs onto open tubular capillary gas chromatography columns.

deep eutectic solvent↗
DOE OSTI2014

Synthesis of one-dimensional porous Co{sub 3}O{sub 4} nanobelts and their ethanol gas sensing properties

Graphical abstract: 1D porous porous Co{sub 3}O{sub 4} nanobelts were synthesized via a facile route without use of any surfactants or organic solvent, exhibiting ethanol gas sensing properties superior to the commercial Co{sub 3}O{sub 4} powders. - Highlights: • One-dimensional porous Co{sub 3}O{sub 4} nanobelts were synthesized. • The belt-like morphology can be finely controlled via adjusting the reaction parameters. • The evolution process of porous Co{sub 3}O{sub 4} nanobelts was investigated. • Porous Co{sub 3}O{sub 4} nanobelts exhibit superior ethanol gas sensing properties. - Abstract: In this paper, one-dimensional porous Co{sub 3}O{sub 4} nanobelts were synthesized via a facile template-free hydrothermal method and subsequent the thermal decomposition. Their microstructures and morphologies were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and N{sub 2} adsorption–desorption techniques. The results indicate that the reaction parameters such as the molar ratio of Co(NO{sub 3}){sub 2}·6H{sub 2}O to C{sub 2}H{sub 4}N{sub 4}, the amount of Co(NO{sub 3}){sub 2}·6H{sub 2}O, the hydrothermal temperature and time play crucial rules in controlling the microstructures and morphologies of the as-prepared cobalt precursors. A possible formation mechanism was proposed. Moreover, the obtained porous Co{sub 3}O{sub 4} nanobelts exhibit ethanol gas sensing properties superior to the commercial Co{sub 3}O{sub 4} powders at a working temperature of 200 °C, suggesting their potential applications as nanosensors.

36 MATERIALS SCIENCE↗
DOE OSTI2018

A one-pot, solid-state route for realizing highly visible light active Na-doped gC{sub 3}N{sub 4} photocatalysts

The visible light photocatalytic activity of graphitic carbon nitride (gC{sub 3}N{sub 4}), a promising metal-free photocatalytic material, is rather low, and is not as good as expected. Herein, to realize improved photocatalytic activity, sodium-doped gC{sub 3}N{sub 4} (Na-gC{sub 3}N{sub 4}) is prepared through a novel solid-state process based on the thermal polycondensation of urea in the presence of sodium chloride and ammonium chloride. The proposed solid-state process is simple, requires no solvent, and provides a general route for rapid and large-scale synthesis of metal-doped gC{sub 3}N{sub 4}. The Na species exist in + 1 oxidation state and bind N atoms in the nitride ring of gC{sub 3}N{sub 4}. The photocatalytic activity improvement of gC{sub 3}N{sub 4} for the mineralization of 17α-ethynylestradiol (EE2) under visible light is seen after the Na doping. The improved photocatalytic activity is due to increased absorption of light, increased separation of charge carriers, stronger oxidation ability of valance band holes, and increased specific surface area. The typical photocatalytic activity of 0.6 wt% Na-gC{sub 3}N{sub 4} for the EE2 mineralization with an initial EE2 concentration of 1 mg/L and a catalyst concentration of 1 g/L is 95.7% within 2 h of visible light irradiation. Under identical experimental conditions, the EE2 mineralization by pristine gC{sub 3}N{sub 4} is only 23.5%. - Graphical abstract: Highly visible light active Na-gC{sub 3}N{sub 4} photocatalysts were simply synthesized through a novel one-pot route based on the thermal polycondensation of urea. The doped Na species plays a critical role in improving the photocatalytic activity. Display Omitted - Highlights: • A new solid-state route is introduced to obtain visible light active Na-doped gC{sub 3}N{sub 4}. • The proposed synthesis route is fast, simple, and highly scalable. • Na doping leads to improved light absorption capability. • Na doping leads to improved separation of charge carriers. • Na doping leads to improved photocatalytic activity under visible light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Direction-specific interaction forces underlying zinc oxide crystal growth by oriented attachment

Here, crystallization by particle attachment is impacting our understanding of natural mineralization processes and holds promise for novel materials design. When particles assemble in crystallographic registry, expulsion of the intervening solvent and particle coalescence is enabled by near-perfect co-alignment via interparticle forces that remain poorly quantified. Here we report measurement and simulation of these nanoscale aligning forces for the ZnO(0001)-ZnO(000¯1) system in aqueous solution. Dynamic force spectroscopy using nanoengineered single crystal probes reveals an attractive force with 60o rotational periodicity. Calculated distance and orientation-dependent potentials of mean force show several attractive free energy wells distinguished by numbers of intervening water layers, which reach a minimum when aligned. The calculated activation energy to separate the attractively bound solvated interfaces perfectly reproduces the measured 60o periodicity, revealing the key role of intervening water structuring as a basis to generate the interparticle torque that completes alignment and enables coalescence.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Using Combinations of Oxidants and Bases as PCET Reactants: Thermochemical and Practical Considerations

Studies in proton-coupled electron transfer (PCET) often require the combination of an outer-sphere oxidant and a base, to remove an electron and a proton. A common problem is the incompatibility of the oxidant and the base, because the former is electron deficient and the latter electron rich. We have tested a variety of reagents and report a number of oxidant/base combinations that are compatible and therefore potentially useful as PCET reagents. A formal bond dissociation free energy (BDFE) for a reagent combination is defined by the redox potential of the oxidant and pKa of the base. This is a formal BDFE because no X-H bond is homolytically cleaved, but it is a very useful way to categorize the H• accepting ability of an oxidant/base PCET pair. Formal BDFEs of stable oxidant/base combinations range from 71 to at least 100 kcal mol-1. Effects of solvent, concentration, temperature, and counterions on the stability of the oxidant/base combinations are discussed. Possible extensions to related reductant/acid combinations are mentioned. We gratefully acknowledge the financial support of the U.S. National Science Foundation Center for Enabling New Technologies through Catalysis, the Camille and Henry Dreyfus Postdoctoral Program in Environmental Chemistry (for a fellowship to A.J.M.M.), the U.S. National Institutes of Health (grant GM-50422), and the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences.

Waidmann, Christopher R↗
DOE OSTI2020

Engineering Solid Electrolyte Interphase Composition by Assessing Decomposition Pathways of Fluorinated Organic Solvents in Lithium Metal Batteries

Studies have shown fluorinated electrolyte solvents can form desirable solid electrolyte interphase (SEI) in lithium metal batteries. In this study, we develop a detailed mechanistic understanding of two high performing electrolytes, Fluoroethylene Carbonate (FEC) and Difluoroethylene Carbonate (DFEC) to demonstrate minimal structural variations can lead to different decomposition products, and thereby the nature of the SEI. Using density functional theory (DFT) calculations, we find different initial bond-breaking mechanisms between FEC and DFEC. We develop free energy diagrams for the decomposition pathways including both electrochemical and chemical steps. Using the computational Li electrode, we identify the largest limiting potential of 1.77 V for FEC decomposition, associated with the formation of lithium fluoride, lithium oxide and FEC oligomers, and 1.53 V for DFEC, which correspond to the formation of polymerized vinylene carbonate and lithium fluoride. We suggest the formation of oligomers in the case of FEC instead of long polymers may lead to better SEI compactness. We also demonstrate the SEI components of FEC and DFEC are not stable on typical cathode voltage (3.87 V). This study presents a unified electrocatalytic perspective on SEI formation and decomposition.

25 ENERGY STORAGE↗
DOE OSTI2025

PPI DataHub Project Data Package: S. elongatus PCC 7942 Limited Proteolysis and Thermal Proteome Profiling Structural Proteomics (JM-PB-DP3)

The purpose of this experiment was to investigate structural alterations in proteins involved in central carbon metabolism and photosynthetic electron transfer pathways in Synechococcus elongatus PCC 7942. Sample data was obtained from S. elongatus cell lysates using three complementary mass spectrometry (MS) techniques using limited proteolysis (LiP-MS), thermal proteome profiling (TPP-MS), and redox enrichment (Redox-MS) in evaluating alterations solvent accessibility and structural stability caused by light perturbation at the molecular level. Experimentally processed sample data for LiP and TPP proteomic datasets were derived from the same cell culture stock, prepared simultaneously in parallel, and acquired by mass spectrometry. Processed datasets are openly accessible from the download button and contain secondary processed proteomic results files, computed outputs, and supporting metadata materials. Experimental samples processed for LiP-MS label-free quantification (LFQ) or TPP-MS tandem mass tag (TMT) 10-plex were acquired using a Q-Exactive HF-X mass spectrometer and processed/compiled using either MSGF+ (v2024.03.26) or ​​​​PlexedPiper for proteome evaluation. Additional software supporting downstream proteomic analysis include FragPipe (v.4.0), MSFragger (v.22.1), and an adapted Microbial Isolate LiP Analysis Workflow (located at Zenodo). Processed proteomic data downloads include a sample naming key, normalized quantification results files, and processed protein annotated abundance files.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2003

Searching for Alien Life Having Unearthly Biochemistry

The search for alien life in the solar system should include exploring unearth-like environments for life having an unearthly biochemistry. We expect alien life to conform to the same basic chemical and ecological constraints as terrestrial life, since inorganic chemistry and the laws of ecosystems appear to be universal. Astrobiologists usually assume alien life will use familiar terrestrial biochemistry and therefore hope to find alien life by searching near water or by supplying hydrocarbons. The assumption that alien life is likely to be based on carbon and water is traditional and plausible. It justifies high priority for missions to search for alien life on Mars and Europa, but it unduly restricts the search for alien life. Terrestrial carbon-water biochemistry is not possible on most of the bodies of our solar system, but all alien life is not necessarily based on terrestrial biochemistry. If alien life has a separate origin from Earth life, and if can survive in an environment extremely different from Earth's, then alien life may have unearthly biochemistry. There may be other solvents than water that support alien life and other elements than carbon that form complex life enabling chain molecules. Rather than making the exploration-restricting assumption that all life requires carbon, water, and terrestrial biochemistry, we should make the exploration-friendly assumption that indigenous, environmentally adapted, alien life forms might flourish using unearthly biochemistry in many places in the solar system. Alien life might be found wherever there is free energy and a physical/chemical system capable of using that energy to build living structures. Alien life may be discovered by the detection of some general non-equilibrium chemistry rather than of terrestrial biochemistry. We should explore all the potential abodes of life in the solar system, including those where life based on terrestrial biochemistry can not exist.

Jones, Harry↗
DOE OSTI2016

Re-evaluation of the Gamma Radiolysis Radiation Chemistry of Neptunium

The reprocessing of spent nuclear fuel by solvent extraction techniques starts with dissolving fuel in concentrated nitric acid (HNO{sub 3}). The resulting radioactive liquor is subjected to multiple stages of solvent extraction to partition desired metal ions (e.g. uranium, plutonium, and neptunium) into an organic phase using specialized extractants. Under process conditions the solvent system is continuously exposed to a high intensity radiation field, which induces radiolytic degradation of both the diluent and extractants. This degradation occurs through the formation of radicals, as well as degradation products. Moreover, both radicals and degradation products can undergo redox chemistry with metal ions within the solvent system. This can be particularly problematic for metals such as neptunium which depend on the maintenance of a particular valence state amenable to complexation by extractants such as tributylphosphate in the PUREX (Plutonium Uranium Redox Extraction) process. Neptunium (Np) is well extracted when it is Np(IV) and Np(VI) but almost unextractable when Np(V). A recently study showed that the radiolysis of Np (VI) in acidic (4 M HNO{sub 3}) solution underwent reduction to Np(V). This reduction only occurred after sufficient production of nitrous acid (HNO{sub 2}) which countered the action of radiolytically-produced oxidizing free radicals (nitrate radical, NO{sub 3}{sup .} and hydroxyl radical, {sup .}OH). This radiation-induced chemistry was successfully modeling using a simplified kinetic model, that included a reaction set for water radiolysis, plus published rate constants for the reactions of free radicals with Np(VI) and Np(V). The most sensitive reaction rate constants were identified in this model, and optimization of the five most sensitive was performed to get excellent model agreement with the experimental data. No Np(IV) was observed or predicted by the model under these conditions. The present research re-evaluates this radiation chemistry of neptunium in aerated aqueous solutions of HNO; by using a far more comprehensive FACSIMILE code. We have also extended this modeling to study the radiolytically-induced Np redox chemistry occurring under multiple other nitric acid acidities, to fully characterize the importance of the oxidizing radical and reducing nitrous acid reactions under a range of conditions relevant to large-scale process conditions. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Flexible polyurethanes, renewable fuels, and flavorings from a microalgae oil waste stream

Renewable polymers have become an important focus in next-generation materials, and algae biomass offers an environmentally low-impact feedstock that can serve multiple uses. This study aims to develop a scalable methodology for production of microalgae-based polyols for polyurethane synthesis from waste oils derived from algae biomass. Following separation of omega-3 fatty acids from algae oil, residual oils can offer valuable building blocks for petrochemical replacements. However, unlike vegetable oils, algae oils contain organic contaminants, including photosynthetic pigments and hydrophobic cofactors that can complicate preparative methodologies. Here we convert and purify waste streams from omega-3 depleted Nannochloropsis salina algae oil, with major components consisting of palmitic and palmitoleic acid, into azelaic acid (AA) as a building block for flexible polyurethanes, with a simultaneous production of heptanoic acid (HA) as a flavor and fragrance precursor. Conversion of free fatty acid mixtures into a soft soap allows extraction of organic contaminants, and urea complexation provides isolated palmitoleic acid, which is subsequently ozonolyzed to produce AA and HA. Bio-based polyester diols are prepared from AA via esterification to provide a polyol monomer for flexible polyurethane foam preparation. The HA co-product is modified to produce the flavoring agent methyl heptanoate and also decarboxylated to produce hexane as a renewable solvent. This scalable process can be performed on oils from multiple algal species, offering valuable monomers from a highly sustainable source.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗