Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Singularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Path dependence of J in three numerical examples

Three cracked geometries are studied with the aid of a new finite element model. The procedure employs a variable singularity at the crack tip that tracks changes in the material response during the loading process. Two of the problems are tension-loaded center-crack panels and the other is a three-point bend specimen. Results usually agree with other numerical and analytical analyses, except the finding that J is path dependent as a substantial plastic zone develops. Credible J values are obtained near the crack tip and J shows a significant increase as the radius of J path increases over two orders of magnitude. Incremental and deformation theories are identical provided the stresses exhibit proportionality found in the far field stresses but not near the tip.

Karabin, M. E., Jr.↗
NASA NTRS1979

Asymptotic continuation method for trajectory optimization

A continuation method is applied to a singular perturbation parameter to obtain a new numerical method for computing optimal trajectories. This method allows one to use simply calculated reduced order approximations as starting solutions and continue the perturbation parameter until the optimal full-order solution is obtained. The method does not require the calculation of higher order correction terms nor does it require the perturbation parameter to be small - thus, it has potentially superior convergence properties compared to conventional asymptotic expansions when the perturbation parameter is large. A simple trajectory optimization problem is considered to illustrate the method.

Washburn, R. B., Jr.↗
NASA NTRS1979

Failure analysis of composite laminates with free edges

Linear elastic stress distributions obtained from a refined finite element mesh are used in conjunction with the tensor polynomial failure criterion to predict the initiation of failure in symmetric, finite-width graphite-epoxy laminates under tensile loading. Results are presented for a wide variety of laminates including: (+ and - theta)s angle-ply; cross-ply (0/90)s and (90/0)s; and quasi-isotropic (90/0/+ and - 45)s and (+ and -45/0/90)s. It is shown that the elastic stress distributions generally compare favorably with other published results, but also indicate improved satisfaction of the stress-free boundary conditions and indicate some differences in the singular behavior of selected stress components at the free edge. The tensor polynomial failure criterion is used to predict the location and mode of first failure. Examination of the individual terms of the polynomial indicates different modes of failure depending upon the laminate configuration.

Herakovich, C. T.↗
NASA NTRS1979

Boundary layer thermal stresses in angle-ply composite laminates

Boundary-layer thermal stress singularities and distributions of angle-ply composite laminates under uniform thermal loading are investigated through a system of sixth-order governing partial differential equations developed with the aid of the anisotropic elasticity field equations and Lekhnitskii's complex stress functions. Results are presented for cases of various angle-ply graphite/epoxy laminates, and it is shown that the boundary-layer thickness depends on the degree of anisotropy of each individual lamina, thermomechanical properties of each ply, and the relative thickness of adjacent layers.

Wang, S. S.↗
NASA NTRS1980

An analysis of delamination in angle-ply fiber-reinforced composites

A study of the mechanics and failure modes of delamination initiated from a surface flaw in angle-ply fiber-reinforced composites is presented. The analysis employs a hybrid-stress finite-element method including a crack-tip singular element with its field variables expressed by Muskhelishvili's complex stress functions. Solutions are obtained for the delaminated composites with various laminate parameters. The results elucidate unique and important characteristics of delamination crack-tip response and interlaminar stress transfer mechanisms. Of particular interest are the mixed-mode stress-intensity factors associated with the delamination crack. The influence of ply orientation on KI and KII and their effects on subsequent crack extension are discussed.

Wang, S. S.↗
NASA NTRS1980

Output of acoustical sources

Acoustic radiation from a source, here viewed as an immobile point singularity with periodic strength and a given multipolar nature, is affected by the presence of nearly structural elements (e.g., rigid or impedance surfaces) as well as that of a background flow in the medium. An alternative to the conventional manner of calculating the net source output by integrating the energy flux over a distant control surface is described; this involves a direct evaluation of the secondary wavefunction at the position of the primary source and obviates the need for a (prospectively difficult) flux integration. Various full and half-planar surface configurations with an adjacent source are analyzed in detail, and the explicit results obtained, in particular, for the power factor of a dipole brings out a substantial rise in its output as the source nears the sharp edge of a half-plane.

Levine, H.↗
NASA NTRS1980

The direct deconvolution of X-ray spectra

The method of deconvolution of proportional counter X-ray spectra as outlined by Blissett and Cruise is reviewed with particular emphasis on low-energy spectra. This method involves the expansion of the incident spectrum in terms of a set of orthonormal singular functions which propagate independently through the detector matrix. When applied to low-energy detectors which typically exhibit absorption features in their efficiency curves, the initial Blissett and Cruise prescription is shown to be unstable. Alternative methods for handling the efficiency are described and evaluated. In the deconvolution of steep spectra, additional distortions are shown to arise as a result of sidelobe oscillations in the effective response functions. A selective weighting procedure is thus introduced to suppress spurious features of this type. Finally, the role of filtering in the deconvolution procedure is discussed and several suitable forms for the filter are suggested.

Kahn, S. M.↗
NASA NTRS1980

Crack problems for a rectangular plate and an infinite strip

The general plane problem for an infinite strip containing multiple cracks perpendicular to its boundaries is considered. The problem is reduced to a system of singular integral equations. Two specific problems of practical interest are then studied in detail. The first problem explores the interaction effect of multiple edge cracks in a plate or beam under tension or bending. The second problem is that of a rectangular plate containing an arbitrarily oriented crack in the plane of symmetry. Particular emphasis is placed on the problem of a plate containing an edge crack and subjected to concentrated forces.

Civelek, M. B.↗
NASA NTRS1980

On Rosen's theory of gravity and cosmology

Formal similarities between general relativity and Rosen's bimetric theory of gravity were used to analyze various bimetric cosmologies. The following results were found: (1) physically plausible model universes which have a flat static background metric, have a Robertson-Walker fundamental metric, and which allow co-moving coordinates do not exist in bimetric cosmology. (2) it is difficult to use the Robertson-Walker metric for both the background metric (gamma mu nu) and the fundamental metric tensor of Riemannian geometry( g mu nu) and require that g mu nu and gamma mu nu have different time dependences. (3) A consistency relation for using co-moving coordinates in bimetric cosmology was derived. (4) Certain spatially flat bimetric cosmologies of Babala were tested for the presence of particle horizons. (5) An analytic solution for Rosen's k = +1 model was found. (6) Rosen's singularity free k = +1 model arises from what appears to be an arbitary choice for the time dependent part of gamma mu nu.

Barnes, R. C.↗
NASA NTRS1981

Steering law for parallel mounted double-gimbaled control moment gyros. Revision A

Mounting of double-gimbaled control moment gyros (CMG's) of unlimited outer gimbal angle freedom with all their outer gimbal axes parallel allows drastic simplification of the CMG steering law development hardware. The advantages of the parallel mounting for the CMG steering law development are such that a law could be developed which is applicable to any number of CMG's with arbitrary angular momentum. Parallel mounting of the CMG's in conjunction with the steering law can therefore be considered a CMG kit suitable for many missions of differing momentum requirements. It also means that increasing momentum demands during the design phase of a space vehicle can be easily met by the addition of one or more CMG's of the original momentum capacity rather than a redesign to a larger momentum capacity. Another advantage of the parallel mounting is that the failure of any CMG can be treated like any other, i.e., only one failure mode is possible. The CMG steering law distributes the CMG momentum vectors such that all inner gimbal angles are equal which reduces the rate requirements on the outer gimbal axes. The steering law also spreads the outer gimbals which ensures avoidance of singularities internal to the angular momentum envelope.

Kennel, H. F.↗
NASA NTRS1978

Theoretical study of hull-rotor aerodynamic interference on semibuoyant vehicles

Analytical methods are developed to predict the pressure distribution and overall loads on the hulls of airships which have close coupled, relatively large and/or high disk loading propulsors for attitude control, station keeping, and partial support of total weight as well as provision of thrust in cruise. The methods comprise a surface-singularity, potential-flow model for the hull and lifting surfaces (such as tails) and a rotor model which calculates the velocity induced by the rotor and its wake at points adjacent to the wake. Use of these two models provides an inviscid pressure distribution on the hull with rotor interference. A boundary layer separation prediction method is used to locate separation on the hull, and a wake pressure is imposed on the separated region for purposes of calculating hull loads. Results of calculations are shown to illustrate various cases of rotor-hull interference and comparisons with small scale data are made to evaluate the method.

Spangler, S. B.↗
NASA NTRS1979

A three-dimensional viscous/potential flow interaction analysis method for multi-element wings: Modifications to the potential flow code to allow part-span, high-lift devices and close-interference calculations

The description of the modified code includes details of a doublet subpanel technique in which panels that are close to a velocity calculation point are replaced by a subpanel set. This treatment gives the effect of a higher panel density without increasing the number of unknowns. In particular, the technique removes the close approach problem of the earlier singularity model in which distortions occur in the detailed pressure calculation near panel corners. Removal of this problem allowed a complete wake relaxation and roll-up iterative procedure to be installed in the code. The geometry package developed for the new technique and also for the more general configurations is based on a multiple patch scheme. Each patch has a regular array of panels, but arbitrary relationships are allowed between neighboring panels at the edges of adjacent patches. This provides great versatility for treating general configurations.

Maskew, B.↗
NASA NTRS1980

Effects of an AST program on US titanium story

The singular importance of titanium as the primary structural material for an efficient advanced supersonic transport (AST) is outlined. The advantages of titanium over other metals are shown to apply to future subsonic aircraft as well as for supersonic designs. The cost problem of titanium is addressed and shown to be markedly reduced by the emerging technologies of superplastic forming/diffusion bonding sandwich, hot isostatic pressing of titanium powders, and isothermal forgings if demonstration programs should validate preliminary findings. The impact of a U.S. AST program on the United States titanium supply and demand picture is postulated.

Fitzsimmons, R. D.↗
NASA NTRS1978

Analytical study of STOL Aircraft in ground effect. Part 2: Nonplanar, nonlinear method applicable to three dimensional jets of finite thickness

The ability of the potential flow analysis (POTFAN) to predict the influence of ground proximity on lift systems is examined. A two dimensional study employing vortex lattice methodology provides confidence that ground effect phenomenon can be predicted using discrete singularity representation. Two dimensional quasi-steady ascent and descent behavior determined provides guidance in interpreting three dimensional results. Steady and quasi-steady ground effect aerodynamic characteristics predicted by POTFAN are presented for several basic unpowered configurations. POTFAN results are compared with experimental data and results of other analytical methods. Modification of POTFAN to incorporate multienergy flow analysis is discussed. General aspects of thick jet models are examined to provide a basic for extending POTFAN's scope to include analysis of propulsive lift interactions.

Shollenberger, C. A.↗
NASA NTRS1978

Wind profiles for Space Shuttle loads analysis

The small scale wind velocity perturbations in vertical wind profiles at Cape Kennedy, Florida were analyzed in order to derive information for simulations of space shuttle ascent through the perturbed atmosphere. The available statistical data does not permit specification of various aspects of idealized singularities and wavelike perturbations with a reasonable degree of confidence. The information developed as a result of the analysis described in Section 3 of this report is suitable for the further development of idealized models. The term perturbation is used instead of the more common term, gust. According to the conventional approach, a gust profile is calculated by applying a high pass digital filter to a Jimsphere profile; all the speeds in the filtered profile are defined as gusts. The high pass filtered profile is defined as a residual profile and the maximum residual in the vicinity of a specified reference height is defined as the gust. Gusts defined in this manner represent the perturbation peaks. A detailed discussion of the calculation of residual profiles and gusts is given. The meteorological coordinate system, the data sample, and Jimsphere profiles are also described. Recommendations and conclusions are presented.

Adelfang, S. I.↗
NASA NTRS1981

Three-dimensional separated flows past ground vehicles

The separated flow past a thick body is calculated using a theoretical model based on a discrete wake-vortex representation. Rehbach's unsteady inviscid scheme (1977) was used in the three-dimensional analysis. The obstacle is represented by singularities, and the wake is modeled by vortex particles emitted at the separation line. Calculated results for an axisymmetric body are compared with flow visualization results.

Chometon, F.↗
NASA NTRS1981

An asymptotic unsteady lifting-line theory with energetics and optimum motion of thrust-producing lifting surfaces

A low frequency unsteady lifting-line theory is developed for a harmonically oscillating wing of large aspect ratio. The wing is assumed to be chordwise rigid but completely flexible in the span direction. The theory is developed by use of the method of matched asymptotic expansions which reduces the problem from a singular integral equation to quadrature. The wing displacements are prescribed and the pressure field, airloads, and unsteady induced downwash are obtained in closed form. The influence of reduced frequency, aspect ratio, planform shape, and mode of oscillation on wing aerodynamics is demonstrated through numerical examples. Compared with lifting-surface theory, computation time is reduced significantly. Using the present theory, the energetic quantities associated with the propulsive performance of a finite wing oscillating in combined pitch and heave are obtained in closed form. Numerical examples are presented for an elliptic wing.

Ahmadi, A. R.↗
NASA NTRS1981

Practical robustness measures in multivariable control system analysis

The robustness of the stability of multivariable linear time invariant feedback control systems with respect to model uncertainty is considered using frequency domain criteria. Available robustness tests are unified under a common framework based on the nature and structure of model errors. These results are derived using a multivariable version of Nyquist's stability theorem in which the minimum singular value of the return difference transfer matrix is shown to be the multivariable generalization of the distance to the critical point on a single input, single output Nyquist diagram. Using the return difference transfer matrix, a very general robustness theorem is presented from which all of the robustness tests dealing with specific model errors may be derived. The robustness tests that explicitly utilized model error structure are able to guarantee feedback system stability in the face of model errors of larger magnitude than those robustness tests that do not. The robustness of linear quadratic Gaussian control systems are analyzed.

Lehtomaki, N. A.↗