Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Simulation optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Canonical Signed Digit Study: FIR Digital Filter Simulation Results - Part 2

Finite Impulse Response digital filter using Canonical Signed-Digit (CSD) number representation for the coefficients has been studied and its computer simulation results are presented here. Minimum Mean Square Error (MMSE) criterion is employed to optimize filter coefficients into the corresponding CSD numbers. To further improve coefficients optimization process, an extra non-zero bit is added for any filter coefficients exceeding 1/2. This technique improves frequency response of filter without increasing filter complexity almost at all. The simulation results show outstanding performance in bit-error-rate (BER) curve for all CSD implemented digital filters included in this presentation material.

Kim, Heechul↗
NASA NTRS2011

Noise of Embedded High Aspect Ratio Nozzles

A family of high aspect ratio nozzles were designed to provide a parametric database of canonical embedded propulsion concepts. Nozzle throat geometries with aspect ratios of 2:1, 4:1, and 8:1 were chosen, all with convergent nozzle areas. The transition from the typical round duct to the rectangular nozzle was designed very carefully to produce a flow at the nozzle exit that was uniform and free from swirl. Once the basic rectangular nozzles were designed, external features common to embedded propulsion systems were added: extended lower lip (a.k.a. bevel, aft deck), differing sidewalls, and chevrons. For the latter detailed Reynolds-averaged Navier-Stokes (RANS) computational fluid dynamics (CFD) simulations were made to predict the thrust performance and to optimize parameters such as bevel length, and chevron penetration and azimuthal curvature. Seventeen of these nozzles were fabricated at a scale providing a 2.13 inch diameter equivalent area throat." ! The seventeen nozzles were tested for far-field noise and a few data were presented here on the effect of aspect ratio, bevel length, and chevron count and penetration. The sound field of the 2:1 aspect ratio rectangular jet was very nearly axisymmetric, but the 4:1 and 8:1 were not, the noise on their minor axes being louder than the major axes. Adding bevel length increased the noise of these nozzles, especially on their minor axes, both toward the long and short sides of the beveled nozzle. Chevrons were only added to the 2:1 rectangular jet. Adding 4 chevrons per wide side produced some decrease at aft angles, but increased the high frequency noise at right angles to the jet flow. This trend increased with increasing chevron penetration. Doubling the number of chevrons while maintaining their penetration decreased these effects. Empirical models of the parametric effect of these nozzles were constructed and quantify the trends stated above." Because it is the objective of the Supersonics Project that future design work be done more by physics-based computations and less by experiments, several codes under development were evaluated against these test cases. Preliminary results show that the RANS-based code JeNo predicts the spectral directivity of the low aspect ratio jets well, but has no capability to predict the non-axisymmetry. An effort to address this limitations, used in the RANS-based code of Leib and Goldstein, overpredicted the impact of aspect ratio. The broadband shock noise code RISN, also limited to axisymmetric assumptions, did a good job of predicting the spectral directivity of underexpanded 2:1 cold jet case but was not as successful on high aspect ratio jets, particularly when they are hot. All results are preliminary because the underlying CFD has not been validated yet. An effort using a Large Eddy Simulation code by Stanford University predicted noise that agreed with experiments to within a few dB.

Bridges, James E.↗
NASA NTRS1996

Design of Power System Architectures for Small Spacecraft Systems

The objective of this research is to perform a trade study on several candidate power system architectures for small spacecrafts to be used in NASA's new millennium program. Three initial candidate architectures have been proposed by NASA and two other candidate architectures have been proposed by Howard University. Howard University is currently conducting the necessary analysis, synthesis, and simulation needed to perform the trade studies and arrive at the optimal power system architecture. Statistical, sensitivity and tolerant studies has been performed on the systems. It is concluded from present studies that certain components such as the series regulators, buck-boost converters and power converters can be minimized while retaining the desired functionality of the overall architecture. This in conjunction with battery scalability studies and system efficiency studies have enabled us to develop more economic architectures. Future studies will include artificial neural networks and fuzzy logic to analyze the performance of the systems. Fault simulation studies and fault diagnosis studies using EMTP and artificial neural networks will also be conducted.

Momoh, James A.↗
NASA NTRS1981

Optimization of radar imaging system parameters for geological analysis

The use of radar image simulation to model terrain variation and determine optimum sensor parameters for geological analysis is described. Optimum incidence angle is determined by the simulation, which evaluates separately the discrimination of surface features possible due to terrain geometry and that due to terrain scattering. Depending on the relative relief, slope, and scattering cross section, optimum incidence angle may vary from 20 to 80 degrees. Large incident angle imagery (more than 60 deg) is best for the widest range of geological applications, but in many cases these large angles cannot be achieved by satellite systems. Low relief regions require low incidence angles (less than 30 deg), so a satellite system serving a broad range of applications should have at least two selectable angles of incidence.

Waite, W. P.↗
NASA NTRS1998

Workstation-Based Simulation for Rapid Prototyping and Piloted Evaluation of Control System Designs

The development and optimization of flight control systems for modem fixed- and rotary-. wing aircraft consume a significant portion of the overall time and cost of aircraft development. Substantial savings can be achieved if the time required to develop and flight test the control system, and the cost, is reduced. To bring about such reductions, software tools such as Matlab/Simulink are being used to readily implement block diagrams and rapidly evaluate the expected responses of the completed system. Moreover, tools such as CONDUIT (CONtrol Designer's Unified InTerface) have been developed that enable the controls engineers to optimize their control laws and ensure that all the relevant quantitative criteria are satisfied, all within a fully interactive, user friendly, unified software environment.

Mansur, M. Hossein↗
NASA NTRS2019

Scale-Resolving Simulations of Laminar-to-Turbulent Transition in Swept-Wing Flow

Aerodynamic shape optimization of swept Natural Laminar Flow (NLF) wing design plays an important role for the development of future energy-efficient commercial transport aircraft. Lack of predictive laminar-to-turbulent transition modeling capabilities is still limiting the extent to which design can rely on computational tools, while making costly wind tunnel and flight tests a necessity. Prediction of transition on practical 3D wing geometries using the e (sup N) method coupled with laminar boundary layer and linear stability codes or local statistical correlation CFD (Computational Fluid Dynamics) models such as the gamma - Re (sub theta) Langtry-Menter model have proven challenging, whereas transitional hybrid RANS-LES solvers have shown encouraging but still mitigated results.

Scale-resolving↗
NASA NTRS2003

Fuel Injector Design Optimization for an Annular Scramjet Geometry

A four-parameter, three-level, central composite experiment design has been used to optimize the configuration of an annular scramjet injector geometry using computational fluid dynamics. The computational fluid dynamic solutions played the role of computer experiments, and response surface methodology was used to capture the simulation results for mixing efficiency and total pressure recovery within the scramjet flowpath. An optimization procedure, based upon the response surface results of mixing efficiency, was used to compare the optimal design configuration against the target efficiency value of 92.5%. The results of three different optimization procedures are presented and all point to the need to look outside the current design space for different injector geometries that can meet or exceed the stated mixing efficiency target.

Steffen, Christopher J., Jr.↗
NASA NTRS1996

Optimization Study of the Ames 0.5 Two-Stage Light Gas Gun

There is a need for more faithful simulation of space debris impacts on various space vehicles. Space debris impact velocities can range up to 14 km/sec and conventional two-stage light gas guns with moderately heavy saboted projectiles are limited to launch velocities of 7-8 km/sec. Any increases obtained in the launch velocities will result in more faithful simulations of debris impacts. It would also be valuable to reduce the maximum gun and projectile base pressures and the gun barrel erosion rate. In this paper, the results of a computational fluid dynamics (CFD) study designed to optimize the performance of the NASA Ames 0.5' gun by systematically varying seven gun operating parameters are reported. Particularly beneficial effects were predicted to occur if (1) the piston mass was decreased together with the powder mass and the hydrogen fill pressure and (2) the pump tube length was decreased. The optimum set of changes in gun operating conditions were predicted to produce an increase in muzzle velocity of 0.7-1.0 km/sec, simultaneously with a substantial decrease in gun erosion. Preliminary experimental data have validated the code predictions. Velocities of up to 8.2 km/sec with a 0.475 cm diameter saboted aluminum sphere have been obtained, along with large reductions in gun erosion rates.

Bogdanoff, D. W.↗
NASA NTRSDate not supplied

Generating a 4D Global CH(4) Product by Assimilating TROPOMI column CH(4) in NASA’s GEOS GCM

Examination of temporal and spatial CH4 variability is crucial for better understanding the human and natural processes driving climate change and ultimately designing mitigation strategies. Here we present an analysis framework that uses NASA’s GEOS General Circulation Model (GCM) to construct a high-resolution, time varying picture of atmospheric CH4 consistent with measurements from a variety of platforms, both in situ and remotely sensed. The resulting time varying atmospheric CH4 product can (i) support interpretation of high-resolution point source detection approaches, (ii) provide reanalysis fields for CH4 and other greenhouse gases, and (iii) supply boundary conditions for regional models. Our approach starts with a set of CH4 emissions from various inventories that have been adjusted to match the global annual growth rate over recent decades. These emissions are transported by the GEOS GCM, which in turn is constrained by meteorology from NASA’s Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) product. The simulated atmospheric field is compared with CH4 measurements, such as those from the TROPOspheric Monitoring Instrument (TROPOMI), and adjustments calculated following a Bayesian protocol. The accuracy of the resultant optimal atmospheric CH4 field can be demonstrated by its improved agreement (compared to a direct simulation of the CH4 inventories) with a host of independent CH4 measurements, such as those from the Total Carbon Column Observation Network (TCCON) and in situ observations from surface and airborne platforms.

Nikolay V. Balashov↗
NASA NTRS1994

Vista/F-16 Multi-Axis Thrust Vectoring (MATV) control law design and evaluation

For the Multi-Axis Thrust Vectoring (MATV) program, a new control law was developed using multi-axis thrust vectoring to augment the aircraft's aerodynamic control power to provide maneuverability above the normal F-16 angle of attack limit. The control law architecture was developed using Lockheed Fort Worth's offline and piloted simulation capabilities. The final flight control laws were used in flight test to demonstrate tactical benefits gained by using thrust vectoring in air-to-air combat. Differences between the simulator aerodynamics data base and the actual aircraft aerodynamics led to significantly different lateral-directional flying qualities during the flight test program than those identified during piloted simulation. A 'dial-a-gain' flight test control law update was performed in the middle of the flight test program. This approach allowed for inflight optimization of the aircraft's flying qualities. While this approach is not preferred over updating the simulator aerodynamic data base and then updating the control laws, the final selected gain set did provide adequate lateral-directional flying qualities over the MATV flight envelope. The resulting handling qualities and the departure resistance of the aircraft allowed the 422nd_squadron pilots to focus entirely on evaluating the aircraft's tactical utility.

Zwerneman, W. D.↗
NASA NTRSDate not supplied

From Simulation to Reality With Random Noise

The challenging environment of autonomous vehicle (AV) navigation necessitates certain functions be performed by deep neural networks. Optimizing these models involves collecting vast quantities of domain-specific training data and ensuring that the dataset is representative of expected conditions. High-fidelity simulation plays a vital role in making this process feasible, allowing a wide range of scenarios to be explored at low cost. However, learning from simulation introduces subtle biases into models, which can degrade real-world performance in unpredictable ways. This effect can be mitigated with learning schemes specialized to bridge distributional shifts (transfer learning). Given the complex nature of these methods, the underlying models, and their environments, meaningfully evaluating performance is notstraight forward. Many unrelated factors can effect an improvement in generalization accuracy, but a full ablation analysis is often difficult. To tease out signal from noise, it is necessary to understand how transfer learning performance is affected by noise itself. The goals of this paper are (i) to establish a domain randomization baseline for a simple classification transfer learning task and (ii) to validate the RRAV testbed as a platform for further research in sim-to-real learning. We generate imagery from a simulation of NASA Ames Research Center and train a small convolutional neural network (ConvNet) to classify position relative to a centerline. Further models are trained with different types of noise progressively added to the data. The models are deployed aboard the on-site test vehicle to test real-world performance. In our experiments, we find that such naive domain randomization raises sim-to-real accuracy from 64% to 79%, while training directly on real data yields an 89% accuracy ceiling. These results suggest that the isolated mechanism of domain randomization can significantly improve generalization.

simulation↗
NASA NTRS1971

Ride comfort control in large flexible aircraft

The problem of ameliorating the discomfort of passengers on a large air transport subject to flight disturbances is examined. The longitudinal dynamics of the aircraft, including effects of body flexing, are developed in terms of linear, constant coefficient differential equations in state variables. A cost functional, penalizing the rigid body displacements and flexure accelerations over the surface of the aircraft is formulated as a quadratic form. The resulting control problem, to minimize the cost subject to the state equation constraints, is of a class whose solutions are well known. The feedback gains for the optimal controller are calculated digitally, and the resulting autopilot is simulated on an analog computer and its performance evaluated.

Warren, M. E.↗
NASA NTRS1979

Optimization of MLS receivers for multipath environments

The angle tracking problems in microwave landing system receivers along with a receiver design capable of optimal performance in the multipath environments found in air terminal areas were studied. Included were various theoretical and evaluative studies like: (1) signal model development; (2) derivation of optimal receiver structures; and (3) development and use of computer simulations for receiver algorithm evaluation. The development of an experimental receiver for flight testing is presented. An overview of the work and summary of principal results and conclusions are reported.

Mcalpine, G. A.↗
NASA NTRS1983

Altitude/path-angle transitions in fuel-optimal problems for transport aircraft

Altitude/path angle transitions to fuel-optimal, energy climb and descent paths are examined for subsonic transport aircraft. These transitions are termed boundary layers in singular perturbation theory, the framework used herein to simplify solutions to the state-Euler system. The energy climb and descent paths provide equilibrium or stationary points for the boundary layer system, and thus for moderate transitions, presumed valid for the class of aircraft considered, the boundary layer system may be linearized. This simplification allows derivation of an explicit solution to the two-point boundary-value, boundary layer problem and, as a consequence, yields a nearly optimal control law, in feedback form, for the transitions. Numerical simulation results using the feedback control law are presented for a Boeing 737 airframe (NASA-ATOPS Vehicle) employing twin JT8D-7-7A engines.

Gracey, C.↗
NASA NTRS1984

Feature selection and the information content of Thematic Mapper simulator data for forest structural assessment

An assessment is made of the information content of Thematic Mapper Simulator (TMS) data for the case of a forested region, in order to determine the sensitivity of such data to forest crown closure and tree size class. Principal components analysis and Monte Carlo simulation indicated that channels 4, 7, 5 and 3 were optimal for four-channel forest structure analysis. As the number of channels supplied to the Monte Carlo feature selection routine increased, classification accuracy increased. The greatest sensitivity to the forest structural parameters, which included succession within clearcuts as well as crown closure and size class, was obtained from the 7-channel TMS data.

Spanner, M. A.↗
NASA NTRS1987

Simulation Of Research And Development Projects

Measures of preference for alternative project plans calculated. Simulation of Research and Development Projects (SIMRAND) program aids in optimal allocation of research and development resources needed to achieve project goals. Models system subsets or project tasks as various network paths to final goal. Each path described in terms of such task variables as cost per hour, cost per unit, and availability of resources. Uncertainty incorporated by treating task variables as probabilistic random variables. Written in Microsoft FORTRAN 77.

Miles, Ralph F.↗