Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sim”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Stabilizing a Vanadium Oxide Catalyst by Supporting on a Metal-Organic Framework

NU-1000 is a robust and highly porous Zr-based metal–organic framework (Zr-MOFs) that has been confirmed to be an excellent catalyst support because of its well-defined crystal structure, protonic grafting sites on its nodes, and thermal stability, all of which advantageously offer the possibility to study the nature of the catalytic reactive sites. In this report, we introduce a vanadium-oxide catalyst supported on NU-1000 synthesized by solvothermal deposition in MOFs (SIM), namely, V-NU-1000. The catalytic activity of V-NU-1000 was investigated by studying the oxidation of 4-methoxybenzyl alcohol under an O 2 atmosphere; this catalyst showed higher conversion and higher selectivity than vanadium-oxide supported on high-surface-area zirconia (V-ZrO 2 ). The stability of V-NU-1000 was confirmed by recyclability and leaching tests, in which recycled V-NU-1000 had catalytic ability comparable to that of the fresh catalyst, and no loss in the metal loading was found in recollected V-NU-1000.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of Surface Organometallic Catalysts by Gas-Phase Ligand Stripping and Reactive Landing of Mass-Selected Ions

Organometallic complexes immobilized on surfaces combine the high selectivity of homogeneous catalysts with the ease of separation of catalyst from products of heterogeneous materials. Here we report a novel approach for the highly controlled preparation of surface organometallic catalysts by gas-phase ligand stripping combined with reactive landing of mass-selected ions onto self assembled monolayer surfaces. Collision induced dissociation is used to generate highly reactive undercoordinated metal complexes in the gas-phase for subsequent surface immobilization. Complexes with an open coordination shell around the metal center are demonstrated to show enhanced activity towards reactive landing in comparison to fully ligated species. In situ TOF-SIMS analysis indicates that the immobilized complexes exhibit behaviour consistent with catalytic activity when exposed to gaseous reagents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using imaging spectroscopy to detect variation in terrestrial ecosystem productivity across a water-stressed landscape

A central challenge to understanding how climate anomalies, such as drought and heatwaves, impact the terrestrial carbon cycle, is quantification and scaling of spatial and temporal variation in ecosystem gross primary productivity (GPP). Existing empirical and model-based satellite broadband spectra-based products have been shown to miss critical variation in GPP. We evaluate the potential of high spectral resolution (10 nm) shortwave (400–2,500 nm) imagery to better detect spatial and temporal variations in GPP across a range of ecosystems, including forests, grassland-savannas, wetlands, and shrublands in a water-stressed region. Estimates of GPP from eddy covariance observations were compared against airborne hyperspectral imagery, collected across California during the 2013–2014 HyspIRI airborne preparatory campaign. Observations from 19 flux towers across 23 flight campaigns (102 total image-flux tower pairs) showed GPP to be strongly correlated to a suite of spectral wavelengths and band ratios associated with foliar physiology and chemistry. A partial least squares regression (PLSR) modeling approach was then used to predict GPP with higher validation accuracy (adjusted R 2 = 0.71) and low bias (0.04) compared to existing broadband approaches (e.g., adjusted R 2 = 0.68 and bias = -5.71 with the Sims et al. model). Significant wavelengths contributing to the PLSR include those previously shown to coincide with Rubisco (wavelengths 1,680, 1,740, and 2,290 nm) and V cmax (wavelengths 1,680, 1,722, 1,732, 1,760, and 2,300 nm). These results provide strong evidence that advances in satellite spectral resolution offer significant promise for improved satellite-based monitoring of GPP variability across a diverse range of terrestrial ecosystems.

47 OTHER INSTRUMENTATION↗

High-efficiency single-junction p-i-n GaAs solar cell on roll-to-roll epi-ready flexible metal foils for low-cost photovoltaics

We demonstrate the fabrication and characterization of high-efficiency, single-junction p-i-n GaAs solar cells, on flexible metal foil with epi-ready buffer via roll-to-roll fabrication. Single-junction p-i-n GaAs solar cells were fabricated using metal–organic chemical vapor deposition (MOCVD). Furthermore, an efficiency greater than 13% was obtained at 1 sun, which is the highest reported efficiency on GaAs photovoltaics directly deposited on metal tapes. This exceeds our previously reported study showcasing 11.5% efficiency on single-junction p-n solar cell structure. Improved morphology of p-i-n structure compared with p-n is explained by atomic force microscopy (AFM), scanning electron microscopy (SEM), and helium ion microscopy (HIM) measurements. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis showed reduced Zn diffusion in p-i-n cell compared with the p-n cell. We attribute the improvement in efficiency of p-i-n cells on flexible metal tapes to the quality of the junction, surface morphology, controlled diffusion of species within the active layers, and increase in absorption due to the optimized intrinsic layer thickness.

14 SOLAR ENERGY↗

UV‐induced degradation of high‐efficiency silicon PV modules with different cell architectures

Abstract Degradation from ultraviolet (UV) radiation has become prevalent in the front of solar cells due to the introduction of UV‐transmitting encapsulants in photovoltaic (PV) module construction. Here, we examine UV‐induced degradation (UVID) in various commercial, unencapsulated crystalline silicon cell technologies, including bifacial silicon heterojunction (HJ), interdigitated back contact (IBC), passivated emitter and rear contact (PERC), and passivated emitter rear totally diffused (PERT) solar cells. We performed UV exposure tests using UVA‐340 fluorescent lamps at 1.24 W·m −2 (at 340 nm) and 45°C through 4.02 MJ·m −2 (2000 h). Our results showed that modern cell architectures are more vulnerable to UVID, leading to a significant power decrease (−3.6% on average; −11.8% maximum) compared with the conventional aluminum back surface field (Al‐BSF) cells (<−1% on average). The power degradation is largely caused by the decrease in short‐circuit current and open‐circuit voltage. A greater power decrease is observed in bifacial cells with rear‐side exposure compared with those with front‐side exposure, indicating that the rear side is more susceptible to UV damage. Secondary ion mass spectroscopy (SIMS) confirmed an increase in hydrogen concentration near the Si/passivation interface in HJ and IBC cells after UV exposure; the excess of hydrogen could result in hydrogen‐induced degradation and subsequently cause higher recombination losses. Additionally, surface oxidation and hot‐carrier damage were identified in PERT cells. Using a spectral‐based analysis, we obtained an acceleration factor of 5× between unpackaged cells (containing a silicon nitride antireflective coating on the front) in the UV test and an encapsulated module (with the front glass and encapsulant blocking 90% of the UV at 294 nm and 353 nm, respectively) in outdoor conditions. From the analytical calculations, we show that a UV‐blocking encapsulant can reduce UV transmission in the module by an additional factor of ~50.

14 SOLAR ENERGY↗

A novel signal transduction protein: Combination of solute binding and tandem PAS-like sensor domains in one polypeptide chain: Periplasmic Ligand Binding Protein Dret_0059

We report the structural and biochemical characterization of a novel periplasmic ligand-binding protein, Dret_0059, from Desulfohalobium retbaense DSM 5692, an organism isolated from the Salt Lake Retba in Senegal. The structure of the protein consists of a unique combination of a periplasmic solute binding protein (SBP) domain at the N-terminal and a tandem PAS-like sensor domain at the C-terminal region. SBP domains are found ubiquitously and their best known function is in solute transport across membranes. PAS-like sensor domains are commonly found in signal transduction proteins. These domains are widely observed as parts of many protein architectures and complexes but have not been observed previously within the same polypeptide chain. In the structure of Dret_0059, a ketoleucine moiety is bound to the SBP, whereas a cytosine molecule is bound in the distal PAS-like domain of the tandem PAS-like domain. Differential scanning flourimetry support the binding of ligands observed in the crystal structure. There is significant interaction between the SBP and tandem PAS-like domains, and it is possible that the binding of one ligand could have an effect on the binding of the other. We uncovered three other proteins with this structural architecture in the non-redundant sequence data base, and predict that they too bind the same substrates. The genomic context of this protein did not offer any clues for its function. We did not find any biological process in which the two observed ligands are coupled. The protein Dret_0059 could be involved in either signal transduction or solute transport.

Wu, R.↗

Extrinsic Absorption Pathways in Vanadium-Doped SiC Measured Using a Total Internal Reflection Geometry

Vanadium-doped SiC is under study for high-power photoconductive switches and is receiving increased attention as a potential material system for quantum computing, as the V can act as a quantum emitter at telecom wavelengths. Knowledge of the defect-mediated electronic transition pathways from sub-bandgap illumination in this material with low absorption and multi-photon and multi-path transition probability is important in optimizing quantum efficiency. Herein, the optical transitions of vanadium-doped SiC for two polytypes as a function of dopant concentration using a total internal reflection (TIR) geometry are examined. Furthermore, normalized quantum efficiency is reported and correlated with both dopant concentrations (V, N, B, and Al) measured by secondary ion mass spectroscopy (SIMS) and absorption measurements. Although both polytypes respond well to 532 nm light, efficiency at longer wavelengths does not correlate 1:1 with absorption coefficient and strongly depends on the polytype and net background co-dopant concentration. This has important implications for efficient excitation of both carriers for optoelectronics and for the use of V as a quantum emitter.

36 MATERIALS SCIENCE↗

Effect of chlorination on the TlBr band edges for improved room temperature radiation detectors: Effect of chlorination on the TlBr band edges for radiation detectors

Thallium bromide (TlBr) crystals subjected to hydrochloric acid (HCl) chemical treatments have been shown to advantageously affect device performance and longevity in TlBr-based room temperature radiation detectors, yet the exact mechanisms of the improvements remain poorly understood. Here in this paper, we investigate the influence of several HCl chemical treatments on device-grade TlBr and describe the changes in the composition and electronic structure of the surface. Composition analysis and depth profiles obtained from secondary ion mass spectrometry (SIMS) identify the extent to which each HCl etch condition affects the detector surface region and forms of a graded TlBr/TlBr 1-x CL x surface heterojunction. Using a combination of X-ray photoemission spectroscopy (XPS) and hybrid density functional calculations, we are able to determine the valence band offsets, band gaps, and conduction band offsets as a function of Cl content over the entire composition range of TIBr 1-x C1 X . This study establishes a strong correlation between device process conditions, surface chemistry, and electronic structure with the goal of further optimizing the long-term stability and radiation response of TlBr-based detectors.

36 MATERIALS SCIENCE↗

The role of thermal stratification on the co‐spectral properties of momentum transport above an Amazonian forest

The influence of thermal stratification on the turbulent kinetic energy balance has been widely studied; however, its influence on the turbulent stress remains less explored in the presence of tall vegetated canopies and less ideal micrometeorological conditions. Here, the impact of thermal stratification on turbulent momentum flux is considered in the roughness sublayer (RSL) and the atmospheric surface layer (ASL) using the Amazon Tall Tower Observatory (ATTO) in Brazil. A scalewise co‐spectral budget (CSB) model is developed using standard closure schemes for the pressure–velocity decorrelation. The CSB revealed that the co‐spectrum ${F}_{wu}\left({k}_x\right)$ between longitudinal (u') and vertical (w') velocity fluctuations is impacted by the energy spectrum of the vertical velocity ${E}_{ww}\left({k}_x\right)$ and the much less studied longitudinal heat‐flux co‐spectrum ${F}_{u{\theta}_{\mathrm{v}}}\left({k}_x\right)$, where ${\theta}_{\mathrm{v}}^{\prime }$ are temperature fluctuations and ${k}_x$ is the longitudinal wavenumber. Under stable, very stable, and dynamic–convective conditions, the scaling exponent ${F}_{wu}\left({k}_x\right)$ in for the inertial subrange (ISR) scales is dominated by ${F}_{u{\theta}_{\mathrm{v}}}\left({k}_x\right)$ instead of ${E}_{ww}\left({k}_x\right)$. A near ${k}_x^{-7/3}$scaling in ${F}_{u{\theta}_{\mathrm{v}}}\left({k}_x\right)$ robust to large variations in thermal stratification is found, whereas the Kolmogorov ISR scaling for ${E}_{ww}\left({k}_x\right)\sim {k}_x^{-5/3}$ is not found. The scale‐dependent decorrelation time between u' and w' is dominated by ${\epsilon}^{-1/3}{k}_x^{-2/3}$ in the ISR, but is nearly constant for eddies larger than the vertical velocity integral scale, regardless of stability. Implications of these findings for generalized stability correction functions that are based on the turbulent stress budget instead of the turbulent kinetic energy budget are discussed.

canopy turbulence↗

Depth profiling and standardization from the back side of a sample for accurate analyses: Emphasis on quantifying low‐fluence, shallow implants in diamond‐like carbon

Rationale Back‐side thinning of wafers is used to eliminate issues with transient sputtering when analyzing near‐surface element distributions. Precise and accurate calibrated implants are created by including a standard reference material during the implantation. Combining these methods allows accurate analysis of low‐fluence, shallow features even if matrix effects are a concern. Methods Implanted Na (<2.0 × 10 11 ions/cm 2 , peaking <50 nm) in diamond‐like carbon (DLC) film on silicon (solar wind returned by NASA's Genesis mission) was prepared for measurement as follows. Implanted surfaces of samples were epoxied to wafers and back‐side‐thinned using physical or chemical methods. Thinned samples were then implanted with reference ions for accurate quantification of the solar wind implant. Analyses used a CAMECA IMS 7f‐GEO SIMS in depth‐profiling mode. Results Back‐side‐implanted reference ions reduced the need to change sample mounts or stage position and could be spatially separated from the solar wind implant even when measuring monoisotopic ions. Matrix effects in DLC were mitigated and the need to find an identical piece of DLC for a reference implant was eliminated. Accuracy was only limited by the back‐side technique itself. Conclusions Combining back‐side depth profiling with back‐side‐implanted internal standards aides quantification of shallow mono‐ and polyisotopic implants. This technique helps mitigate matrix effects and keeps measurement conditions consistent. Depth profile acquisition times are longer, but if sample matrices are homogeneous, procedural changes can decrease measurement times.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using C₆₀⁺ Sputtering to Improve Detection Limit of Nitrogen in Zinc Oxide

C₆₀⁺ sputtering was firstly used to determine depth profile of nitrogen in zinc oxide materials by time-of-flight secondary ion mass spectrometry (ToF-SIMS). Compared to traditional Cs+ sputtering depth profiling, the C₆₀⁺ sputtering provides over 200 times of effective signal intensity and the detection limit is about 10 times better. In addition, our X-ray photoelectron spectroscopy (XPS) results show that sputtering zinc oxide materials by 10 keV C₆₀⁺ leads to very weak carbon deposition at bottom of the sputter crater.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Programmable Chemical Gradient Patterns by Soft Grayscale Lithography

A method for fabricating chemical gradients on planar and nonplanar substrates using grayscale lithography is reported. Compliant grayscale amplitude masks are fabricated using a vacuum-assisted microfluidic filling protocol that employs dilutions of a carbon-black-containing polydimethylsiloxane emulsion (bPDMS) within traditional clear PDMS (cPDMS) to create planar, fully self-supporting mask elements. The mask is then placed over a surface functionalized with a hydrophobic coumarin-based photocleavable monolayer, which exposes a polar group upon irradiation. The mask serves to modulate the intensity of incident UV light, thereby controlling the density of molecules cleaved. The resulting molecular-level grayscale patterns are characterized by condensation microscopy and imaging mode time-of-flight secondary-ion mass spectrometry (ToF-SIMS). Due to the inherent flexibility of this technique, the photofuse as well as the gradient patterns can be designed for a wide range of applications; in this paper two proof-of-concept demonstrations are shown. The first utilizes the ability to control the resulting contact angle of the surface for the fabrication of a passive pressure-sensitive microfluidic gating system. The second is a model surface modification process that utilizes the functional groups deprotected during the photocleavage to pattern the deposition of moieties with complementary chemistry. The spatial layout, resolution, and concentration of these covalently linked molecules follow the gradient pattern created by the grayscale mask during exposure. Furthermore, the programmable chemical gradient fabrication scheme presented in this work allows explicit engineering of both surface properties that dictate nonspecific interactions (surface energy, charge, etc.) and functional chemistry necessary for covalent bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charged Hole‐Transporting Materials Based on Imidazolium for Defect Passivation in Inverted Perovskite Solar Cells

The hole‐transporting material (HTM) in perovskite solar cells (PSCs) provides an ideal interface with the perovskite layer for hole collection while influencing the perovskite crystalline structure and morphology. This article presents SIM and DIM, two new dopant‐free imidazolium‐based HTMs with charged units accompanied by counter ions that show the potential to function as ionic HTMs and ionic liquid additives and help improve the efficiency and stability of inverted PSCs. DIM‐based PSCs demonstrates exceptional performance with a high‐power conversion efficiency of 19.15%, attributed to improved passivation of perovskite interface defects. Furthermore, these new imidazolium salt‐based HTMs can be manufactured economically, making them a viable option for mass production and PSC commercialization.

Tingare, Yogesh S.↗

Impact of Salt Chemistry and Interlayer Architecture on Solid Electrolyte Interphase Composition and Performance

Reversible lithium metal anodes require interphases that are chemically stable, mechanically robust, and compatible with scalable processing. Here, we use slot-die-coated, salt-rich PEO interlayers to design SEI nanolayers on Cu current collectors and isolate how salt anion chemistry controls interphase composition and lithium plating/stripping behavior in architectures relevant to Li plating and anode-free cells. Mesoscale modeling shows that dendrite initiation at SEI defects is governed by a tradeoff among interphase thickness, ionic conductivity, and stiffness through defect-driven current focusing, motivating controlled formation from thin precursor layers. Using UHV-transferred XPS and ToF-SIMS depth profiling after controlled Li deposition, we find that fluorinated sulfonylimide salts (LiTFSI, LiFSI) form mixed inorganic/organic interphases containing LiF and PEO-derived alkoxides, with LiFSI producing a more LiF-dominant Li-facing surface than LiTFSI under identical conditions. In contrast, LiNO 3 -containing interlayers yield a comparatively thick nitrate-derived interphase that reduces upon Li contact to an N-rich inorganic layer (Li–N/N 3− , LiN x O y ). In Cu| |Li cells, these designed interlayers reduce interfacial resistance and improve Coulombic efficiency (CE) and critical current density (CCD) relative to uncoated controls, with LiFSI- and LiNO 3 -based interlayers providing the highest CE/CCD. Overall, the results demonstrate a manufacturing-relevant approach to engineer SEI nanolayers by salt chemistry, providing pathways to improve reversible lithium metal anodes while reducing reliance on LiTFSI.

anion chemistry↗

Charged loops at the cosmological collider with chemical potential

Cosmological collider physics allows the detection of heavy particles at inflationary scales through their imprints on primordial non-Gaussianities. We study the chemical potential mechanism applied to a pair of charged scalars. We analytically evaluate the resulting one-loop contribution to the bispectrum, using the spectral decomposition. In this way we are able to determine the parametric dependencies for both the signal and the background. We show that a signal strength ${f}_{\text{NL}}\sim \mathcal{O}(0.01)$ can be obtained within theoretical control, potentially reachable by 21 cm tomography. As an application we consider the colored Higgs bosons in SU(5) supersymmetric orbifold grand unification with masses M ≲ 10$^{15}$ GeV.

Bodas, Arushi [Chicago U., EFI; Fermilab] (ORCID:0↗

WIMP dark matter through the dilaton portal

We study a model in which dark matter couples to the Standard Model through a dilaton of a sector with spontaneously broken approximate scale invariance. Scale invariance fixes the dilaton couplings to the Standard Model and dark matter fields, leaving three main free parameters: the symmetry breaking scale $f$, the dilaton mass $m_{\sigma}$, and the dark matter mass $m_{\chi}$. We analyze the experimental constraints on the parameter space from collider, direct and indirect detection experiments including the effect of Sommerfeld enhancement, and show that dilaton exchange provides a consistent, calculable framework for cold dark matter with $f,\,m_\sigma,\,m_\chi$ of roughly similar magnitude and in the range $\sim 1-10$ TeV. Direct and indirect detection experiments, notably future ground-based gamma ray and space-based cosmic ray measurements, can probe the model all the way to dark matter mass in the multi-TeV regime.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Higgs trilinear coupling and the scale of new physics

We consider modifications of the Higgs potential due to new physics at high energy scales. These upset delicate cancellations predicted by the Standard Model for processes involving Higgs bosons and longitudinal gauge bosons, and lead to a breakdown of the theory at high energies. We focus on modifications of the Higgs trilinear coupling and use the violation of tree-level unitarity as an estimate of the scale where the theory breaks down. We obtain a completely model-independent bound of $ \underset{\sim }{<} $ 13 TeV for an order-1 modification of the trilinear. We argue that this bound can be saturated only in fine-tuned models, and the scale of new physics is likely to be much lower. The most stringent bounds are obtained from amplitudes involving multiparticle states that are not conventional scattering states. Our results show that a future determination of the Higgs cubic coupling can point to a well-defined scale of new physics that can be targeted and explored at future colliders.

43 PARTICLE ACCELERATORS↗

Differential cross-section measurements of Higgs boson production in the H → τ + τ - decay channel in pp collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

Differential measurements of Higgs boson production in the τ-lepton-pair decay channel are presented in the gluon fusion, vector-boson fusion (VBF), VH and $t\overline{t}H$ associated production modes, with particular focus on the VBF production mode. The data used to perform the measurements correspond to 140 fb -1 of proton-proton collisions collected by the ATLAS experiment at the LHC. Two methods are used to perform the measurements: the Simplified Template Cross-Section (STXS) approach and an Unfolded Fiducial Differential measurement considering only the VBF phase space. For the STXS measurement, events are categorized by their production mode and kinematic properties such as the Higgs boson’s transverse momentum (${p}_{\textrm{T}}^{\textrm{H}}$ ), the number of jets produced in association with the Higgs boson, or the invariant mass of the two leading jets (mjj). For the VBF production mode, the ratio of the measured cross-section to the Standard Model prediction for m jj > 1.5 TeV and ${p}_{\textrm{T}}^{\textrm{H}}$ > 200 GeV (${p}_{\textrm{T}}^{\textrm{H}}$ < 200 GeV) is ${1.29}_{-0.34}^{+0.39}$ (${0.12}_{-0.33}^{+0.34}$ ). This is the first VBF measurement for the higher-${p}_{\textrm{T}}^{\textrm{H}}$ criteria, and the most precise for the lower-${p}_{\textrm{T}}^{\textrm{H}}$ criteria. The fiducial cross-section measurements, which only consider the kinematic properties of the event, are performed as functions of variables characterizing the VBF topology, such as the signed ΔΦ jj between the two leading jets. The measurements have a precision of 30%–50% and agree well with the Standard Model predictions. These results are interpreted in the SMEFT framework, and place the strongest constraints to date on the CP-odd Wilson coefficient ${c}_{H\overset{\sim }{W}}$ .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗