Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SiC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Low-temperature transport properties of multigraphene films grown on the SiC surface by sublimation

Multigraphene films grown by sublimation on the surface of a semi-insulating 6H-SiC substrate have been studied. It is shown that pregrowth annealing of the substrate in a quasiclosed growth cell improves the structural quality of a multigraphene film. Ohmic contacts to the film have been fabricated, and the Hall effect has been studied at low temperatures. It is found that a 2D electron gas exists in the films. It is concluded that the conductivity of the film is determined by defects existing within the graphene layer or at the interface between the graphene film and a SiC substrate.

36 MATERIALS SCIENCE↗

Conductivity compensation in p-6H-SiC in irradiation with 8-MeV protons

Carrier removal rate (V{sub d}) in p-6H-SiC in its irradiation with 8-MeV protons has been studied. The p-6H-SiC samples were produced by sublimation in vacuum. V{sub d} was determined by analysis of capacitance-voltage characteristics and from results of Hall effect measurements. It was found that complete compensation of samples with initial value of N{sub a} - N{sub d} Almost-Equal-To 1.5 Multiplication-Sign 10{sup 18} cm{sup -3} occurs at an irradiation dose of {approx}1.1 Multiplication-Sign 10{sup 16} cm{sup -2}. In this case, the carrier removal rate was {approx}130 cm{sup -1}.

36 MATERIALS SCIENCE↗

Leakage currents in 4H-SiC JBS diodes

Leakage currents in high-voltage 4H-SiC diodes, which have an integrated (p-n) Schottky structure (Junction Barrier Schottky, JBS), have been studied using commercial diodes and specially fabricated (based on a commercial epitaxial material) test Schottky diodes with and without the JBS structure. It is shown that (i) the main role in reverse charge transport is played by SiC crystal structure defects, most probably, by threading dislocations (density {approx}10{sup 4} cm{sup -2}), and (ii) the JBS structure, formed by the implantation of boron, partially suppresses the leakage currents (by up to a factor of 10 at optimal separation, 8 {mu}m between local p-type regions).

36 MATERIALS SCIENCE↗

Low-temperature (77-300 K) current-voltage characteristics of 4H-SiC p{sup +}-p-n{sup +} diodes: Effect of impurity breakdown in the p-type base

The effect of impurity breakdown on the low-temperature (77-300 K) current-voltage (I-V) characteristics of 4H-SiC diodes with a p-type base has been studied. Experimental samples were fabricated from CVD-grown (chemical vapor deposition) commercial p{sup +}-p-n{sup +} 4H-SiC structures. A high electric field in the p-type base was created by applying a forward bias to the diodes. It was found that, at temperatures of 136, 89, and 81 K, the commonly observed 'diode' portion of the I-V characteristics is followed by a portion in which the current grows more rapidly due to the impact ionization of frozen-out Al acceptor atoms in the ground (unexcited) state. At temperatures of 81 and 77 K, this portion is followed by one with a negative differential resistance due to the regenerative dynistor-like switching of the diode, caused by impact ionization of aluminum atoms in the excited state.

36 MATERIALS SCIENCE↗

Field dependence of the electron drift velocity along the hexagonal axis of 4H-SiC

The forward current–voltage characteristics of mesa-epitaxial 4H-SiC Schottky diodes are measured in high electric fields (up to 4 × 10{sup 5} V/cm) in the n-type base region. A semi-empirical formula for the field dependence of the electron drift velocity in 4H-SiC along the hexagonal axis of the crystal is derived. It is shown that the saturated drift velocity is (1.55 ± 0.05) × 10{sup 7} cm/s in electric fields higher than 2 × 10{sup 5} V/cm.

36 MATERIALS SCIENCE↗

Effect of intercalated hydrogen on the electron state of quasi-free graphene on a SiC substrate

To judge the role of intercalated hydrogen in the doping of quasi-free epitaxial graphene, two systems, specifically, (i) the graphene–NH-SiC{0001} and (ii) graphene–hydrogen single layer–NH-SiC{0001} structures (N = 4, 6) are considered. In case (i), the shift of the Dirac point of epitaxial graphene is induced by the electrostatic potential of spontaneous polarization of the substrate; in case (ii), the shift is due to the field of a double electrical layer formed because of the absorption of hydrogen atoms. It is shown that, in case (ii) compared to case (i), the concentration of holes in graphene is higher and the concentration of electrons is lower. This result is consistent with the currently available experimental data.

36 MATERIALS SCIENCE↗

Effects of irradiation with 8-MeV protons on n-3C-SiC heteroepitaxial layers

The effects of 8-MeV proton irradiation on n-3C-SiC epitaxial layers grown by sublimation on semi-insulating 4H-SiC substrates are studied. Changes in the sample parameters were recorded by the Hall-effect method and judged from photoluminescence spectra. The Hall method was employed to distinguish between the effects of irradiation on the charge-carrier concentration and mobility. It is found that the charge-carrier removal rate (V{sub d}) is ~110 cm{sup –1}. Full compensation of the samples with an initial charge-carrier concentration of ~6.5 × 10{sup 17} cm{sup –3} is observed at irradiation doses of ~6 × 1015 cm{sup –2}. It is found that the mobility at these doses decreased by only a factor of 2.5. Compared with 4H and 6H silicon carbide, no significant increase in the intensity of so-called defect-related photoluminescence is observed.

36 MATERIALS SCIENCE↗

On the Spatial Localization of Free Electrons in 4H-SiC MOSFETS with an n Channel

The problem of the spatial localization of free electrons in 4H-SiC metal—oxide—semiconductor field effect transistors (MOSFETS) with an accumulation- and inversion-type n channel is theoretically analyzed. The analysis demonstrates that, in optimally designed accumulation transistors (ACCUFETs), the average distance from the surface, at which free electrons are localized, may be an order of magnitude larger than that in inversion MOSFETs. This can make 4H-SiC ACCUFETs advantageous as regards the effective carrier mobility in a conducting channel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of Radiation Defects by Proton Braking in Lightly Doped n- and p-SiC Layers

Mathematical simulation of the cascade of displacements in SiC is used to consider the specific features of Frenkel-pair generation upon the scattering of 8- and 15-MeV protons. The distribution histograms of energies acquired not only by primary knocked-out atoms, but also by recoil atoms generated in displacement cascades, are calculated. An analysis of the histograms considers two energy ranges. In the first range of “low” energies, the spontaneous recombination of genetically related Frenkel pairs is dominant. Recoil atoms in the second range have a higher energy, which enables these atoms to leave the spontaneousrecombination zone and dissociate into isolated components. The compensation of lightly doped n- and p-4H-SiC samples grown by gas-phase epitaxy is experimentally studied under irradiation with 8- and 15-MeV protons. The carrier removal rates are measured. The calculated and experimental data are compared and estimates are obtained for the size of the spontaneous-recombination zone.

36 MATERIALS SCIENCE↗

Effect of Electron Irradiation with an Energy of 0.9 MeV on the I–V Characteristics and Low-Frequency Noise in 4H–SiC pin Diodes

It is established experimentally that noticeable changes in the I–V characteristics and low-frequency noise in 4H-SiC pin diodes irradiated by electrons with an energy of 0.9 MeV are observed after doses of Φ ≥ 1.4 × 10{sup 15} cm{sup –2}. The currents in the forward and reverse branches of the I–V characteristics vary nonmonotonically at voltages lower than 2 V with increasing dose, which is explained by the interaction between the excited electronic subsystem and metastable defects. In this case, a steady increase in the ideality factor and the series resistance of diodes in the region of exponential growth of the I–V characteristics at voltages exceeding 2 V is observed. The reliable operation of microwave devices with low-noise 4H-SiC pin diodes under conditions of electron irradiation is possible up to a cumulative dose of Φ ≤ 10{sup 15} cm{sup –2}. In microwave devices, the level of low-frequency noise in which is irrelevant but the stabile regime of parameters is of importance, the dose can be increased to Φ ≈ 8 × 10{sup 15} cm{sup –2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron-Diffraction Study of the Structure of Epitaxial Graphene Grown by the Method of Thermal Destruction of 6H- and 4H-SiC (0001) in Vacuum

The method of reflection high-energy electron diffraction (RHEED) is used for studying the structure of graphene layers formed on the surface of the Si-face of conductive and semi-insulating 6H- and 4H-SiC(0001) substrates by thermal desorption of Si atoms in high vacuum, depending on the temperature and time of sublimating Si atoms as well as depending on the method of preprocessing the substrate surface. Diffraction patterns are recorded in the [1̄21̄0] and [11̄00] crystallographic directions of the substrates. It is found that in all experiments the formation of graphene layers occurs with a rotation of the graphene crystal lattice by 30° relative to the SiC lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron Diffraction Study of Epitaxial Graphene Structure Grown upon SiC (0001) Thermal Destruction in Ar Atmosphere and in High Vacuum

We have studied the structure of epitaxial graphene obtained as a result of thermal desorption of the silicon carbide surface under conditions of vacuum synthesis and in Ar medium by reflection electron diffraction. As a result of the study, a significantly more uniform buffer layer coating of the SiC surface by epitaxial graphene has been found when forming in inert medium on the surface of 4H- and 6H-SiC(0001) polytypes compared with the synthesis of graphene in high vacuum. The quality of the coating has been shown to depend on the degree of perfection of the original single crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A study of the effect of electron and proton irradiation on 4H-SiC device structures

The changes of the current–voltage characteristics and the uncompensated donor-impurity concentration (N{sub d}–N{sub a}) in the base electrode of Schottky diodes and JBS diodes based on 4H-SiC have been studied upon their irradiation with 0.9-MeV electrons and 15-MeV protons. The carrier-removal rate was 0.07–0.15 cm{sup –1} under electron irradiation and 50–70 cm{sup –1} under proton irradiation. It was shown that the current–voltage characteristics of the devices under study remain rectifying at electron irradiation doses of up to ~1017 cm{sup –2}. It was demonstrated that the radiation hardness of the SiC-based devices under study substantially exceeds that of silicon p–i–n diodes with similar breakdown voltages.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Current Status of the Quality of 4H-SiC Substrates and Epilayers for Power Device Applications

ABSTRACT Interfacial dislocations (IDs) and half-loop arrays (HLAs) present in the epilayers of 4H-SiC crystal are known to have a deleterious effect on device performance. Synchrotron X-ray Topography studies carried out on n-type 4H-SiC offcut wafers before and after epitaxial growth show that in many cases BPD segments in the substrate are responsible for creating IDs and HLAs during CVD growth. This paper reviews the behaviors of BPDs in the substrate during the epitaxial growth in different cases: (1) screw-oriented BPD segments intersecting the surface replicate directly through the interface during the epitaxial growth and take part in stress relaxation process by creating IDs and HLAs (Matthews-Blakeslee model [1] ); (2) non-screw oriented BPD half loop intersecting the surface glides towards and replicates through the interface, while the intersection points convert to threading edge dislocations (TEDs) and pin the half loop, leaving straight screw segments in the epilayer and then create IDs and HLAs; (3) edge oriented short BPD segments well below the surface get dragged towards the interface during epitaxial growth, leaving two long screw segments in their wake, some of which replicate through the interface and create IDs and HLAs. The driving force for the BPDs to glide toward the interface is thermal stress and driving force for the relaxation process to occur is the lattice parameter difference at growth temperature which results from the doping concentration difference between the substrate and epilayer.

Dudley, M.↗

Defects in SiC for Quantum Computing

Many novel materials are being actively considered for quantum information science and for realizing high-performance qubit operation at room temperature. It is known that deep defects in wide-band gap semiconductors can have spin states and long coherence times suitable for qubit operation. We theoretically investigate from ab-initio density functional theory (DFT) that the defect states in the hexagonal silicon carbide (4H-SiC) are potential qubit materials. The DFT supercell calculations were performed with the local-orbital and pseudopotential methods including hybrid exchange-correlation functionals. Di-vacancies in SiC supercells yielded defect levels in the gap consisting of closely spaced doublet just above the valence band edge, and higher levels in the band gap. The divacancy with a spin state of 1 is charge neutral. Furthermore, the divacancy is characterized by C-dangling bonds and a Si-dangling bonds. Jahn-teller distortions and formation energies as a function of the Fermi level and single photon interactions with these defect levels will be discussed. In contrast, the anti-site defects where C, Si are interchanged have high formation energies of 5.4 eV and have just a single shallow defect level close to the valence band edge, with no spin. We will compare results including the defect levels from both the electronic structure approaches.

36 MATERIALS SCIENCE↗

Report on status of execution of SiC step document

Advanced fuel claddings made entirely or mainly of silicon carbide (SiC) ceramics and/or composites are considered very attractive elements of the accident-tolerant fuels for the light water reactors. In order to translate the promise of SiC composite materials into a reliable fuel cladding, a coordinated program of component level design and materials development must be carried out with many key feasibility issues addressed a-priori to inform the process. With the primary objective of developing a draft blueprint of a technical program that addresses the critical feasibility issues; assesses design and performance issues related with manufacturing, operating, and off-normal events; and advances the technological readiness levels in essential technology elements, a draft plan for the Systematic Technology Evaluation Program for SiC/SiC Composite Accident-Tolerant LWR Fuel Cladding and Core Structures was developed in the FY-14 Advanced Fuels Campaign of the U.S. Department of Energy’s Fuel Cycles Research and Development Program. This document summarizes the status of execution of the technical plan within the activities at the Oak Ridge National Laboratory.

36 MATERIALS SCIENCE↗

In-pile Hydrothermal Corrosion Evaluation of Coated SiC Ceramics and Composites

Hydrothermal corrosion accelerated by water radiolysis during normal operation is among the most critical technical feasibility issues remaining for silicon carbide (SiC) composite-based cladding that could provide enhanced accident-tolerance fuel technology for light water reactors. An integrated in-pile test was developed and performed to determine the synergistic effects of neutron irradiation, radiolysis, and pressurized water flow, all of which are relevant to a typical pressurized water reactor (PWR). The test specimens were chosen to cover a range of SiC materials and a variety of potential options for environmental barrier coatings. This document provides a summary of the irradiation vehicle design, operations of the experiment, and the specimen loading into the irradiation vehicle.

36 MATERIALS SCIENCE↗

High-pressure polymorphism of two high-strength ceramics: Boron carbide (B4C) and silicon carbide (SiC)

We have determined the lattice-level structure of two high-strength, technologically important ceramic materials under shock wave compression. For decades, laboratory shock wave studies have provided crucial information on the dynamic response of many types of materials. However, previous studies were limited to continuum-level information only. By combining laser compression with pulsed X-ray diffraction we are able to obtain in situ structural information on these materials for the first time. Silicon carbide (SiC) and boron carbide (B4C) are two high-strength ceramics with many technical applications including debris shielding, armoring, and coating. We have carried out Xray diffraction measurements of the structure of SiC and B4C under shock compression to 185 and 300 GPa, respectively. Experiments were performed at the Matter in Extreme Conditions beamline of the Linac Coherent Light Source (LCLS). At LCLS, shock waves are driven into the sample using a high powered laser with approximately 10 nanosecond pulse length. The sample is probed with X-rays from the LCLS free electron laser and diffraction is recorded by x-ray detectors. By varying the delay between the laser and the x-ray probe, the sample can be studied at various times relative to the shock wave entering the sample. The diffraction data have been analyzed to determine the crystal structures, lattice parameters, density, and crystallographic texture as a function of pressure and loading time.

36 MATERIALS SCIENCE↗