Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Segregation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Origin of strain softening in a nanograined Al alloy

Here, one-step and multi-step nanoindentation experiments were conducted to investigate the mechanical response of an Al-Mg-Li alloy. Opposite to the strain hardening effect observed in the coarse-grained (CG) alloy, the nanograined (NG) alloy exhibits strain softening. Compared with multi-step nanoindentation experiments, the ultralow dislocation density and the grain boundary (GB) segregation promote a higher stress level during one-step nanoindentation experiments. Residual perfect dislocations induced by a previous loading and unloading during multi-step nanoindentation experiments lower the stress required for further plastic deformation. In addition, the storage of partial dislocations also serves to render plastic flow to commence at lower stresses. This work provides new insights for the fabrication and property optimization of NG alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

In Situ Oxidation Studies of High-Entropy Alloy Nanoparticles

Although high-entropy alloys (HEAs) have shown tremendous potential for elevated temperature, anticorrosion, and catalysis applications, little is known on how HEA materials behave under complex service environments. Herein, we studied the high-temperature oxidation behavior of Fe 0.28 Co 0.21 Ni 0.20 Cu 0.08 Pt 0.23 HEA nanoparticles (NPs) in an atmospheric pressure dry air environment by in situ gas-cell transmission electron microscopy. It is found that the oxidation of HEA NPs is governed by Kirkendall effects with logarithmic oxidation rates rather than parabolic as predicted by Wagner's theory. Further, the HEA NPs are found to oxidize at a significantly slower rate compared to monometallic NPs. The outward diffusion of transition metals and formation of disordered oxide layer are observed in real time and confirmed through analytical energy dispersive spectroscopy, and electron energy loss spectroscopy characterizations. Localized ordered lattices are identified in the oxide, suggesting the formation of Fe 2 O 3 , CoO, NiO, and CuO crystallites in an overall disordered matrix. Hybrid Monte Carlo and molecular dynamics simulations based on first-principles energies and forces support these findings and show that the oxidation drives surface segregation of Fe, Co, Ni, and Cu, while Pt stays in the core region. The present work offers key insights into how HEA NPs behave under high-temperature oxidizing environment and sheds light on future design of highly stable alloys under complex service conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Nano-Plasticity of an Electrified Ionic Liquid/Electrode Interface: Uncovering Hard–Soft Structuring via Controlled Metal Fill Factor

Here, ionic liquids (ILs) nanostructuring at electrified interfaces is of both fundamental and practical interest as these materials are increasingly gaining prominence in energy storage and conversion processes. However, much remains unresolved about IL potential-controlled (re)organization under highly polarized interfaces, mostly due to the difficulty of selectively probing both the distal and proximal surface layers of adsorbed ions. In this work, the structural dynamics of the innermost layer (<10 nm from the surface) were independently interrogated from that of the ionic layers in the sub-surface region (>100 nm from the surface), using an infrared (IR) spectroscopy approach. By tuning the metal fill factor of gold films deposited on conductive metal oxide-modified IR internal reflection elements, the charge-driven (re)structuring of the inner and distal layers of 1-butyl-1-methylpyrrolidinium trifluoromethanesulfonate is unveiled. Within a relatively wide potential region (~±1 V) bounding the potential of zero charges, the ionic liquid is shown to undergo a reversible (i.e., soft) reorganization whereby the innermost layer of anions (cations) is exchanged by a layer of cations (anions). Kinetically unhindered changes in the number density of constituent cations and anions largely follow electrostatic expectations in the subsurface region, whereas the innermost layer exhibits a pronounced hysteresis and very slow relaxation. Under larger negative potential bias, IL restructuring is characterized by a highly irreversible (i.e., hard) and intense interfacial densification of the BMPy + cations, consistent with the formation of nanoscale segregated liquids. The outcomes of this work reveal a plastic IL nanostructuring under a strong electric field.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Origins of Photoluminescence Instabilities at Halide Perovskite/Organic Hole Transport Layer Interfaces

Metal halide perovskites are promising for optoelectronic device applications; however, their poor stability under solar illumination remains a primary concern. While the intrinsic photostability of isolated neat perovskite samples has been widely discussed, it is important to explore how charge transport layers—employed in most devices—impact photostability. Here, in this paper, we study the effect of organic hole transport layers (HTLs) on light-induced halide segregation and photoluminescence (PL) quenching at perovskite/organic HTL interfaces. By employing a series of organic HTLs, we demonstrate that the HTL’s highest occupied molecular orbital energy dictates behavior; furthermore, we reveal the key role of halogen loss from the perovskite and subsequent permeation into organic HTLs, where it acts as a PL quencher at the interface and introduces additional mass transport pathways to facilitate halide phase separation. In doing so, we both reveal the microscopic mechanism of non-radiative recombination at perovskite/organic HTL interfaces and detail the chemical rationale for closely matching the perovskite/organic HTL energetics to maximize solar cell efficiency and stability.

14 SOLAR ENERGY↗
DOE OSTI2026

Pressurized Gas-Driven Elemental Redistribution Enables Ultrastable PtNi Catalysts for Heavy-Duty Vehicles

Gas-driven element redistribution, characterized by the preferential enrichment of one element at the surface relative to the bulk, is frequently observed in multicomponent alloys. Using L1 0 -ordered PtNi as a model system, we reveal that gas pressure plays a critical role in governing adsorption-driven surface composition during annealing in reducing gases: low pressure favors Pt surface segregation, while high pressure facilitates Ni surface enrichment. In this study, we developed a high-pressure nitriding (HPN) strategy that modulates the surface structure and composition of PtNi catalysts. The resulting HPN-PtNi exhibits enhanced performance and durability in membrane electrode assemblies for heavy-duty fuel cell applications, maintaining a high current density of 1.19 A cm −2 at 0.7 V after 90,000 voltage cycles. Through a combination of experimental and theoretical analyses, we reveal that the HPN process forms additional stabilizing Ni−N bonds and induces elemental redistribution with Ni surface enrichment and a Ni-deficient Pt subsurface. These modifications alter the atomic coordination environment of the ordered PtNi phase. This work presents a generalizable strategy to design robust and high-performing Pt-based catalysts by controlling gas-pressure-driven elemental redistribution and dopant incorporation.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2018

Stabilizing nanoprecipitates in Al-Cu alloys for creep resistance at 300°C

Commercial precipitation-hardened Al-Cu alloys are normally used at temperatures below its ageing temperature of ~225°C, to avoid thermally induced precipitate coarsening and resultant softening. Making such popular Al alloys creep resistant at or above 300°C is thus challenging. Here we present a modified precipitation protocol, exploiting Sc-microalloying and a carefully designed three-step heat treatment to enhance Sc segregation at the matrix/θ'-Al 2 Cu precipitate interfaces. The stabilized nanoprecipitates enable an order-of-magnitude reduction in creep rate at 300°C, demonstrating the room for microstructure improvement and the potential for property elevation in traditional engineering alloys through innovative processing coupled with synergetic alloying elements.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Genomics and Development of Lentinus tigrinus : A White-Rot Wood-Decaying Mushroom with Dimorphic Fruiting Bodies

Lentinus tigrinus is a species of wood-decaying fungi (Polyporales) that has an agaricoid form (a gilled mushroom) and a secotioid form (puffball-like, with enclosed spore-bearing structures). Previous studies suggested that the secotioid form is conferred by a recessive allele of a single locus. We sequenced the genomes of one agaricoid (Aga) strain and one secotioid (Sec) strain (39.53-39.88 Mb, with 15,581-15,380 genes, respectively). We mated the Sec and Aga monokaryons, genotyped the progeny, and performed bulked segregant analysis (BSA). We also fruited three Sec/Sec and three Aga/Aga dikaryons, and sampled transcriptomes at four developmental stages. Using BSA, we identified 105 top candidate genes with nonsynonymous SNPs that cosegregate with fruiting body phenotype. Transcriptome analyses of Sec/Sec versus Aga/Aga dikaryons identified 907 differentially expressed genes (DEGs) along four developmental stages. On the basis of BSA and DEGs, the top 25 candidate genes related to fruiting body development span 1.5 Mb (4% of the genome), possibly on a single chromosome, although the precise locus that controls the secotioid phenotype is unresolved. The top candidates include genes encoding a cytochrome P450 and an ATP-dependent RNA helicase, which may play a role in development, based on studies in other fungi.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Interaction of Hydrogen Atoms with Grain Boundaries in Palladium Bicrystals

Hydrogen diffusion in palladium bicrystals containing a small-angle twist or tilt boundary or a large-angle boundary similar to a special boundary is investigated using molecular dynamics simulation. We assess the effect of grain boundaries on the hydrogen diffusion process. The types of grain boundaries considered here are shown to differ in their absorption activity for hydrogen. The temporal grain-boundary segregation of hydrogen atoms can be accounted for in terms of their coordination, which differs significantly from that in the grain bulk.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Influence of Ferromagnetic Carbon Nanotubes on Magnetic Transitions in Liquid Crystals

Magnetic field-induced orientational transitions in suspensions of carbon nanotubes (CNTs) in nematic liquid crystals have been studied in the framework of a continuum theory. Ferromagnetic CNTs are considered that possess, in addition to a large anisotropy of diamagnetic susceptibility, an additional magnetic moment due to ferromagnetic particles either situated on the CNT surface or encapsulated inside. It is established that, depending on the energy of coupling between disperse CNTs and liquid-crystalline matrix, the external magnetic field induces various sequences of orientational transitions. A threshold value of the coupling energy is determined, above which a transition from the initial homogeneous planar phase to inhomogeneous state (angular phase) becomes possible. At coupling energies below the threshold, the increasing magnetic field induces the following sequence of orientational transitions: homogeneous planar phase–inhomogeneous (angular) phase–homogeneous homeotropic phase–inhomogeneous angular phase. It is established that, depending on the intensity of segregation phenomena, these transitions can be of the first or second order. Analytical expressions for the fields of second-order transitions between phases are found. On an example of the optical phase difference between the ordinary and extraordinary rays of light passing through the cell of CNT suspension, it is shown that the suspension can exhibit optical bistability during the first-order orientational transition.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Formation of Nanosized Surface Layers of 03Kh17N12M2 Stainless Steel by Implantation of N{sup +} Ions

Accumulation of nitrogen in nanosized surface layers of 03Kh17N12M2 stainless steel has been detected upon N{sup +} ion implantation up to 14 at % together with metal nitrides, mainly of chromium nitride CrN and interstitial solid solution. It has been demonstrated that N{sup +} ion implantation accompanied by preliminary irradiation by Ar{sup +} and O{sup +} ions decreases maximum nitrogen concentration by at least two times. It is assumed that this is stipulated by segregation to surface layers of iron atoms upon irradiation by Ar{sup +} ions as well as formation of chromium oxide Cr{sub 2}O{sub 3} and chromium hydroxide CrOOH upon irradiation by O{sup +} ions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

In-Operando XRD Study of the Effects of Water Vapor on Phase Formation in LSM/YSZ SOFC Cathodes

Here, in-operando XRD was conducted on anode supported SOFC button cells with LSM-YSZ cathodes operated at varying cathode air compositions under constant current conditions for over 1000 h. 1-hour XRD scans were continuously collected throughout the entire operation duration. By taking the sum of measured intensities from all of the collected patterns, the resulting cumulative XRD count times allowed the identification of minor phases present at concentrations as low as <0.1 wt%. In dry air with no contaminants, the cathode exhibited improving power output during the first couple of hundred hours, followed by stable operation. The effect of 3% H 2 O + 12% CO 2 on the LSM-YSZ cathode was very similar to the effect of 3% H 2 O alone, exhibiting performance degradation. Increasing contaminants in the cathode air were found to decrease the performance of the cells. In-operando XRD discovered an increase in MnO concentration and decrease in La 2 O 3 . A gradual expansion of the LSM lattice resulting from loss of Sr or O was discovered in the LSM/YSZ cathodes tested in humid cathode air. The inverse relationship between the unit cell volume and operating voltage suggests a possible correlation between Sr segregation and performance degradation in the LSM/YSZ cathodes.

25 ENERGY STORAGE↗
DOE OSTI2023

Coastal typologies and surface and subsurface characteristics of the Alaskan Beaufort Sea Coast

This dataset was generated to classify the Alaskan Beaufort Sea Coast (ABSC) into a set of distinct coastal typologies, to understand the surface and subsurface characteristics and variability of the ABSC, and to quantify relationships between these characteristics and historical rates of shoreline change. This geospatial dataset contains two csv files of points along the ABSC at a 50 m spacing, one for points sheltered by a barrier island and one for points exposed to the open ocean. Each point has a lat/lon location, and we have attributed to each point average values for elevation, historical long-term shoreline change rates, shoreline orientation, landcover, mean annual ground temperature, geomorphic unit, lithology, geology, ecological landscape unit, maximum thaw settlement potential, massive ice content, and segregated ice content. Each point is also assigned to one of 16 coastal typologies, determined by a hierarchical clustering algorithm on the elevation, shoreline change, orientation, and ground temperature data. There are 9 sheltered typologies and 7 exposed typologies, identified by an integer label in the last column of each csv file. The other two csv files contain the integer IDs and classes for the landcover and geomorphology datasets.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

High-Density, Low-Hysteresis Storage Using Hydrated Salts in Surface-Functionalized Hydrogels (Final Technical Report)

Nearly 70 years ago, Glauber’s salt was identified as a leading phase change material (PCM) in terms of its heat storage density (~2x paraffin), thermal conductivity (~1W/m·K), safety, availability and cost (~$\$$100/ton). However, the complex issues of supercooling and incongruent melting due to phase separation have prevented realization of the promise. The addition of thickeners and nucleating agents such as borax solve these issues but only over few cycles. This work aims to (a) resolve long-standing challenges with Glauber’s salt as a thermal storage material through a unique materials approach, (b) to characterize the new material’s properties that are relevant to performance and (c) to explore its incorporation into commercial water heaters. The materials concept involves encapsulating the salt in custom-designed, large-mesh hydrogels that enable breakthrough advances. Specifically, (1) the choice of mesh size and polymer chemistry control diffusion of salt/water and help to eliminate phase segregation. With the hydrogel itself occupying <10% volume, there is little loss in storage density compared to another encapsulation. (2) Specific nucleation centers that covalently tether to the hydrogel trigger heterogeneous nucleation, eliminating supercooling-associated hysteresis losses. The fact that they are spatially tethered, prevents the loss in performance over multiple freeze/thaw cycles (>100). We report extensive characterization of the hydrogel complex in terms of its storage density, freezing/melting temperature, cycling losses, rheological properties, aging and thermal conductivity. The novel material developed in this work is a significant advancement over the state-of-art. Finally, we investigate its potential as a thermal storage material for commercial/residential water heating and identify scenarios in which its deployment is advantageous.

25 ENERGY STORAGE↗
DOE OSTI2026

Improving perovskite solar module stability by understanding and mitigating scribe-induced chemo-thermomechanical degradation

Recognizing the correlation between the design of perovskite solar module (PSM) and their degradation mechanisms under environmental stressors helps to enable their long- term reliability. This work reports on the impact of the hole-transport layer (HTL) on thermal cyclability and degradation mechanisms of p-i-n PSMs by comparing 3 HTLs: NiO x , MeO-2PACz (a self-assembled monolayer), and a bilayer HTL of MeO-2PACz on NiO x . We observe surprising thermal cyclability from a performance standpoint despite generating clear degradation products. We find that without a fully dense HTL, seemingly insignificant moisture/oxygen ingress through the edge of the PSMs can lead to rapid destabilization of the metal halide perovskite (MHP) layer due to reactions between MHP degradation byproducts and the indium-tin oxide layer. We also show that illumination-induced cation phase segregation is dependent on the presence of an inactive area (regions of the substrate uncovered by the top electrode). As such, we find that a dense interface between the MHP and ITO is necessary for chemically robust PSMs and highlight criteria for testing field-relevant configurations in lab-scale architectures.

14 SOLAR ENERGY↗
DOE OSTI2017

Photometric Detection of Multiple Populations in Globular Clusters Using Integrated Light

We investigate the multiple stellar populations of the globular clusters (GCs) M3, M5, M13, and M71 using g{sup ′} and intermediate-band CN-λ3883 photometry obtained with the WIYN 0.9 m telescope on Kitt Peak. We find a strong correlation between red giant stars’ CN−g{sup ′} colors and their spectroscopic sodium abundances, thus demonstrating the efficacy of the two-filter system for stellar population studies. In all four clusters, the observed spread in red giant branch CN−g{sup ′} colors is wider than that expected from photometric uncertainty, confirming the well-known chemical inhomogeneity of these systems. M3 and M13 show clear evidence for a radial dependence in the CN-band strengths of its red giants, while the evidence for such a radial dependence of CN strengths in M5 is ambiguous. Our data suggest that the dynamically old, relatively metal-rich M71 system is well mixed, as it shows no evidence for chemical segregation. Finally, we measure the radial gradients in the integrated CN−g{sup ′} color of the clusters and find that such gradients are easily detectable in the integrated light. We suggest that photometric observations of color gradients within GCs throughout the Local Group can be used to characterize their multiple populations, and thereby constrain the formation history of GCs in different galactic environments.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

A Comprehensive Analysis of NGC 2158 in the Gaia Era: Photometric Parameters, Apex, and Orbit

We present an investigation of NGC 2158 using Gaia DR2 data. We identified 800 most likely cluster members with membership probability higher than 90%. The mean proper motions of this object are determined as (μ {sub x} = −0.203 ± 0.003, μ {sub y} = −1.99 ± 0.004) mas yr{sup −1}. The limiting radius, log(age), and distance of the cluster are obtained as 23.5 arcmin, 9.38 ± 0.04 Gyr, and 4.69 ± 0.22 kpc, respectively. The overall mass function slope (0.93 ± 0.14) is flatter than the Salpeter value (1.35) within the mass range of 1.17–1.44 M {sub ⊙}. This cluster also shows the mass-segregation effect and our study demonstrates that NGC 2158 is a dynamically relaxed open cluster. Using the apex diagram (AD), the apex coordinates of the cluster are obtained in different ways and are examined using the (μ {sub U},μ {sub T}) diagram. The best value of the apex coordinates is determined as A = 8724 ± 160, D = −3661 ± 530. We also determined the orbit of the cluster and found that NGC 2158 moves almost in the solar antapex direction. The resulting spatial velocity of NGC 2158 is 51 km s{sup −1}. A significant oscillation along the Z-coordinate up to 529 pc is detected. Various scenarios regarding the origin of this cluster are also discussed.

42 ENGINEERING↗
DOE OSTI2021

Extended Tidal Tails of IC 4756 Detected by Gaia EDR3

We report the discovery of emerged tidal tails around open cluster IC 4756 (~1 Gyr) based on 644 members identified from Gaia EDR3. Three-dimensional spatial positions and two-dimensional tangential velocities (x,y,z,κ&middot;μ{sub α}*/ϖ,κ&middot;μ{sub δ}/ϖ) are utilized to determine the comoving member candidates of IC 4756. Using a Bayesian method, we correct the distance for each cluster member. Two tidal tails extend up to 180 pc and display an S shape in the X'Y' space (Cartesian coordinates focused on cluster center). A clean sequence of our members in the color–absolute–magnitude diagram indicates the coeval population and matches perfectly with the PARSEC isochrone with age from Bossini et al. Mass segregation is detected in this cluster as well. Finally, we derive the tidal radius and core radius of IC 4756 about 12.13 pc and 4.33 ± 0.75 pc, respectively.

42 ENGINEERING↗
DOE OSTI2017

Disintegration of the Aged Open Cluster Berkeley 17

We present the analysis of the morphological shape of Berkeley 17, the oldest known open cluster (∼10 Gyr), using the probabilistic star counting of Pan-STARRS point sources, and confirm its core-tail shape, plus an antitail, previously detected with the 2MASS data. The stellar population, as diagnosed by the color–magnitude diagram and theoretical isochrones, shows many massive members in the clusters core, whereas there is a paucity of such members in both of the tails. This manifests mass segregation in this aged star cluster with the low-mass members being stripped away from the system. It has been claimed that Berkeley 17 is associated with an excessive number of blue straggler candidates. A comparison of nearby reference fields indicates that about half of these may be field contamination.

79 ASTRONOMY AND ASTROPHYSICS↗