Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STEELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Processing Techniques for ODS Stainless Steels

Oxide dispersion-strengthened (ODS) alloys have been studied extensively, in part as a response to the need to develop the high-temperature materials that are required for energy efficient systems. ODS stainless steels, in particular, are of technological interest because of their high ductility and high strength at elevated temperatures, which when combined with their resistance to corrosion, render them ideal for many applications that require extreme performance quality. Survey of the published literature reveals that efforts have been devoted to incorporate specific strengthening mechanisms in order to meet demanding performance criteria for ODS alloys. As a result, a number of novel processing approaches have been developed in an effort to design distinct microstructures that can enhance the performance of ODS alloys. In the current paper, various techniques used to manufacture ODS stainless steel alloys are compared and summarized on the basis of a literature search, and results are contrasted with selected experimental data obtained by the authors. In particular, cryomilling, water-atomization, and melt-spinning processes are described in detail as three novel approaches that can be effectively used to distribute nanometric oxides in 316L stainless steel matrix. The microstructural features, mechanical properties, and sintering behavior of the fabricated materials are described and discussed. The critical processing parameters for each processing technique are discussed with reference to the properties of the material. The versatility and potential challenges of the individual techniques are also described and contrasted.

36 MATERIALS SCIENCE↗

A Novel Shim-Assisted Resistance Spot Welding Process to Improve Weldability of Medium-Mn Transformation-Induced Plasticity Steel

Medium-Mn transformation-induced plasticity steels have great potential to significantly reduce vehicle weight and improve fuel economy due to their outstanding combination of high strength and excellent ductility. One bottleneck to the application is their poor weldability resulting from their high Mn contents. In this paper, three resistance spot welding set-ups, including no shim, an interstitial-free steel shim at the faying interface (shim-in) and shims against the electrodes (shim-out), were incorporated to investigate the weldability of Fe-7Mn-0.14C medium-Mn steel. Tensile-shear, cross-tension, and microhardness tests were used to evaluate the mechanical properties of the welds. Experimental results demonstrated that the failure mode of the welds transitioned from the interfacial fracture in the case of no shim to the desired nugget pull-out fracture in the shim-out set-up, resulting in dramatical improvements in both peak loads and their corresponding extensions during the tensile-shear and cross-tension tests. In contrast, the shim-in set-up made no improvement. What can contribute to such improvement was then discussed on the basis of observed morphologies and microstructures of welds.

36 MATERIALS SCIENCE↗

Inclusion Characterization and Formation Mechanisms in Spring Steel Deoxidized by Silicon

To elucidate the mechanism of formation of inclusions in microalloyed spring steel deoxidized by Si, their number, morphology, and chemical compositions were analyzed by electron probe X-ray microanalysis. Wavelength-dispersive spectrometry and Monte Carlo simulation were used to confirm the existence of inherent FeO in the inclusions. Additions of Nb and V did not have an observable influence on the formation of inclusions. Based on the major chemical compositions, the inclusions in spring steel were classified into four types: CaO-SiO{sub 2}, Al{sub 2}O{sub 3}-SiO{sub 2}, Al{sub 2}O{sub 3}-SiO{sub 2}-CaO, and MnS. Most CaO-SiO{sub 2} inclusions were around 10 μm in diameter, with their composition close to that of the refining slag and liquidus temperatures all below 1400 °C. The Al{sub 2}O{sub 3}-SiO{sub 2} inclusions were mainly attributed to deoxidization products. They were usually multiphased with liquidus temperatures higher than 1500 °C and smaller than 10 μm in diameter. Most Al{sub 2}O{sub 3}-SiO{sub 2}-CaO inclusions with high Al{sub 2}O{sub 3} and SiO{sub 2} contents originated from the coalescence of CaO-SiO{sub 2} and Al{sub 2}O{sub 3}-SiO{sub 2} inclusions; those with high CaO and SiO{sub 2} contents were considered to form via reduction of CaO-SiO{sub 2} inclusions by Al dissolved in the steel.

36 MATERIALS SCIENCE↗

Characteristics of Slag Infiltration in High-Mn Steel Castings

To determine the composition difference between the solid and liquid films in plant practice for high-Mn steel castings, a reaction experiment was carried out to investigate the composition profile of MnO and SiO{sub 2} in the slag layer. Based on the experimental results, a mathematical model of the mold slag for high-Mn steel was developed to describe the nonuniform infiltration behavior of mold slag during oscillation cycles. Moreover, the effects of uneven slag films on slab lubrication and heat transfer in the mold are discussed. The results show that the concentrations of MnO and SiO{sub 2} over the flux layer have an opposite stair-step distribution, which consists of a reaction layer and nonreaction layer. When the reaction layer thickness is 5 mm, a thicker liquid film is formed between the slab and the mold. The inhomogeneity of the composition in the solid film causes large fluctuations in the heat flux in the mold, resulting in irregular depressions on the shell surface. With a reacting thickness of 10 mm, the reacting slag fills in the gap to generate a thinner solid film, which increases the overall heat flux in the mold. Since mold oscillation combined with slag rim enhances the pressure flow in the vicinity of the meniscus, the liquid slag within 80 mm of the mold wall is mixed and consumed quickly. In contrast, the liquid slag beyond 80 mm from the mold wall with a low velocity stays longer in the liquid pool. The model predictions illuminate the characteristics of slag infiltration during high-Mn steel casting, showing good agreement with plant measurements.

36 MATERIALS SCIENCE↗

Additive Manufacturing of a Steel–Ceramic Multi-Material by Selective Laser Melting

Most techniques employed for powder bed additive manufacturing (AM) only can handle a single material. However, additional functionality of the structures built, e.g., local insulation, is desirable for more sophisticated applications. In the present work, a multi-material process allowing for realization of a ceramic coating on a steel substrate and a novel sandwich system are introduced. Both were manufactured by selective laser melting (SLM). As a first step, the microstructure of a bulk zirconia–alumina ceramic, directly manufactured by SLM, was examined and its tensile strength determined. Afterwards, the ceramic was manufactured directly on the as-built surface of a tool steel processed by SLM. For this compound, the adhesive strength was determined. Finally, an open porous structure, made of the same tool steel, was built on top of the ceramic layer. The results clearly prove that the SLM process can be used for direct manufacturing of a multi-material sandwich structure made from metal and ceramic, providing an important step towards complex structures functionalized for electric insulation.

36 MATERIALS SCIENCE↗

Effect of Selenium on the Interaction Between Refractory and Steel

The presence of surface-active selenium in liquid steel has an obvious effect on the wettability between steel and inclusions, significantly affecting inclusion behaviors in liquid steel. In the current study, the influence of surfactant on the interaction between the refractory and liquid iron was investigated. The contact angles between the refractory and liquid iron with and without the selenium addition were measured using the sessile drop method at 1873 K. Besides, the interfacial reaction layer between the iron and refractory was investigated using scanning electron microscopy. It was found that the addition of selenium increased the contact angle between the iron and the refractory and affected the penetration behavior of liquid iron into the refractory.

36 MATERIALS SCIENCE↗

Characterization, Mechanism and Control Measures of V Segregation in Continuous Casting Billet of C-Mn Steel

To eliminate V segregation, which significantly deteriorates the homogeneity of continuous casting steel billets, V segregation in the C-Mn steel billet was observed by microscope, SEM and EDS. The formation mechanism and control measures for V segregation were proposed. Results show that many slim V segregation strips are distributed on an inverted conical surface and that most segregation strips start from the vertex of the inverted conical surface. A series of inverted conical surfaces containing V segregation strips periodically appears along the longitudinal direction of the billet. The microstructures in the V segregation strip are fine granular structures, while the microstructures outside the V segregation strip are coarse Widmanstätten. The V segregation strip also contains many inclusions and porosities. The formation mechanism for V segregation, which is illuminated by a physical simulation of Al-5wt pctCu alloy, is attributed to the fissure in the equiaxed dendritic network torn by solidification contraction. By controlling the percentage and distribution of equiaxed grains, the V segregation in the billet of C-Mn steel is completely eliminated.

36 MATERIALS SCIENCE↗

Evolution of Oxide Inclusions in Si-Mn-Killed Steel During Protective Atmosphere Electroslag Remelting

The current study was motivated to reveal the evolution of MnO-SiO{sub 2}-Al{sub 2}O{sub 3} inclusions during protective atmosphere electroslag remelting (P-ESR), and the effect of slag composition on the inclusion evolution. The oxide inclusions in the consumable steel electrode were ternary (7.1-26.4 mass pct) MnO-(53.3-82.8 mass pct) SiO{sub 2}-(8.3-23.1 mass pct) Al{sub 2}O{sub 3} without exception, which were fully removed during the P-ESR in two ways: a portion of these inclusions were dissociated in its individual chemical species into liquid steel, whereas the others were removed by absorbing them into molten slag before liquid metal droplets collected in liquid metal pool during P-ESR. The oxide inclusions both in liquid metal pool and in remelted ingots are mostly MgAl{sub 2}O{sub 4} (containing about 3 mass pct MgO) and Al{sub 2}O{sub 3} inclusions, irrespective of the SiO{sub 2} contents (1.9 to 9.0 mass pct) in the slag. These inclusions readily formed in the liquid metal pool as a result of the reaction between alloying elements and the dissolved oxygen in liquid steel that dissociated from MnO-SiO{sub 2}-Al{sub 2}O{sub 3} inclusions.

36 MATERIALS SCIENCE↗

Numerical Simulation of the Three-Phase Flow of a Bubble Interacting with the Steel–Slag Interface During the Secondary Refining Process

Gas stirring is an effective method for the secondary refining process of steel. The microphenomena among the phases of an argon bubble floating in steel and motion across the steel–slag interface were simulated and discussed with a sharp interface tracking method. A water-model experiment was set to validate the numerical model, and the experimental results showed agreement with the numerical model. A critical size for bubbles to pass the interface was found using the model.

36 MATERIALS SCIENCE↗

Transformation of Inclusions in Linepipe Steels During Heat Treatment

The effect of heat treatment on the transformation of inclusions in linepipe steels was investigated experimentally and theoretically. During heat treatment, CaO-Al{sub 2}O{sub 3} type of inclusions in steels before heating transformed into Al{sub 2}O{sub 3}-CaS type, and in the form of CaS-Al{sub 2}O{sub 3}-MgO eventually with CaS formed on the surface of Al{sub 2}O{sub 3}-MgO phase, depending on the heating temperature, heating time, size of inclusions, and components such as T.Ca and T.O in steels. The transformation details were revealed by thermodynamic calculations and kinetics analysis; what is more, the coefficients k{sub inc} of each composition in inclusions such as Al{sub 2}O{sub 3}, MgO, CaO, and CaS at 1473 K (1200 °C) were calculated, respectively. The theoretical results in this paper are in good agreement with the experimental observations.

36 MATERIALS SCIENCE↗

Characterization of Inclusions in 3rd Generation Advanced High-Strength Steels

Samples taken from laboratory-produced 3rd generation advanced high-strength steels, solidified at a low cooling rate, have been investigated to study the characteristics of non-metallic inclusions. Two steels, containing 2 and 5 pct Mn content, were produced for this purpose. A higher number of total inclusions were observed in 5 pct Mn steel. The four main types of inclusions observed were Al{sub 2}O{sub 3}, AlN, MnS, and AlSiMn-oxide. These classes were divided into subclasses according to variations in their chemistry. The major subclasses of AlN inclusions are either plate-like or regular in shape and have different size distributions. Thermodynamic calculations suggest that plate-like AlN inclusions are formed at the initial stage of solidification, while faceted/regular-shaped inclusions are precipitated toward the end of solidification. Moreover, it was found that the size of nitride inclusions is related to their N content. This phenomenon is discussed from the viewpoint of nucleation theory.

36 MATERIALS SCIENCE↗

Sulfide Transformation with Tellurium Treatment for Y15 Free-Cutting Steel

To investigate the effect of tellurium on the morphology of sulfide, various amounts of tellurium powders were added to the Y15 free-cutting commercial steel melt and then the melt was cooled in different cooling modes. The composition and morphology of sulfide and telluride in steel were analyzed to investigate the mechanism of MnS transformation combined with in situ observation. The results showed that the precipitation of chain-like MnS inclusions was significantly inhibited due to the addition of tellurium, and these MnS inclusions were transformed into complex inclusions with lower aspect ratios, which were composed of MnS and MnTe. In air-cooling mode, the MnS inclusions were effectively spheroidized when the w([Te])/w([S]) in steel was 0.2, whereas tellurium had almost no effect on the morphology of sulfide in furnace-cooling mode. The mechanism of sulfide spheroidization is discussed. The mechanism was verified by in situ observation experiment through high-temperature laser confocal microscopy.

36 MATERIALS SCIENCE↗

Formation Mechanism of Al{sub 2}O{sub 3}-Containing Inclusions in Al-Deoxidized Spring Steel

The source, characteristics, and mechanism of Al{sub 2}O{sub 3}-containing inclusions in Al-deoxidized spring steel were investigated using electron-probe X-ray microanalysis (EPMA). Spring samples were collected during vacuum degassing (VD) refining, in a tundish ladle, and after hot rolling, respectively. Based on primary inclusion components, seven types of inclusions were observed through the manufacturing process: Al{sub 2}O{sub 3}, Al{sub 2}O{sub 3}-SiO{sub 2}, Al{sub 2}O{sub 3}-CaO, Al{sub 2}O{sub 3}-MgO, Al{sub 2}O{sub 3}-MgO-CaO, Al{sub 2}O{sub 3}-SiO{sub 2}-MnO, and Al{sub 2}O{sub 3}-SiO{sub 2}-CaO. The Al{sub 2}O{sub 3} and Al{sub 2}O{sub 3}-SiO{sub 2} inclusions were mainly attributed to deoxidization products, less than 15 μm in diameter and with liquidus temperatures exceeding 1600 °C. For Al{sub 2}O{sub 3}-CaO inclusions, which were considered to be formed by the reduction of entrapped slag by Al dissolved in the steel, the Al{sub 2}O{sub 3}/CaO ratio obviously decreased with the increase of inclusion sizes. Most Al{sub 2}O{sub 3}-SiO{sub 2}-CaO inclusions were less than 15 μm in diameter, with their composition close to that of the refining slag and a liquidus temperature near 1500 °C. The Al{sub 2}O{sub 3}-MgO and Al{sub 2}O{sub 3}-SiO{sub 2}-MnO inclusions originated from inherent reactions between dissolved [Al], [Si], [Mn], [Mg], and [O] in the steel. Al{sub 2}O{sub 3}-MgO-CaO inclusions resulted from coalescence between Al{sub 2}O{sub 3}-MgO and Al{sub 2}O{sub 3}-CaO inclusions.

36 MATERIALS SCIENCE↗

Interfacial Reaction Between High-Al Steel and CaO-Al{sub 2}O{sub 3}-Based Mold Fluxes with Different CaO/Al{sub 2}O{sub 3} Ratios at 1773 K (1500 °C)

The reaction between high-Al steel and CaO-Al{sub 2}O{sub 3}-based mold fluxes with different CaO/Al{sub 2}O{sub 3} ratios was investigated at 1773 K (1500 °C). The increase of CaO/Al{sub 2}O{sub 3} ratio from 1 to 3 accelerated the accumulation of Al{sub 2}O{sub 3} in the flux and reduction of Na{sub 2}O, but had no significant effect on the reduction of SiO{sub 2} and B{sub 2}O{sub 3}. The microstructure of flux-steel interfaces showed that emulsification occurred in the reaction between steel and mold flux. The emulsification was affected by the precipitation of crystals in the flux after the change of flux composition due to the interfacial reaction.

36 MATERIALS SCIENCE↗

A Simplified Micromechanical Modeling Approach to Predict the Tensile Flow Curve Behavior of Dual-Phase Steels

Micromechanical modeling is used to predict material’s tensile flow curve behavior based on microstructural characteristics. This research develops a simplified micromechanical modeling approach for predicting flow curve behavior of dual-phase steels. The existing literature reports on two broad approaches for determining tensile flow curve of these steels. The modeling approach developed in this work attempts to overcome specific limitations of the existing two approaches. This approach combines dislocation-based strain-hardening method with rule of mixtures. In the first step of modeling, ‘dislocation-based strain-hardening method’ was employed to predict tensile behavior of individual phases of ferrite and martensite. In the second step, the individual flow curves were combined using ‘rule of mixtures,’ to obtain the composite dual-phase flow behavior. To check accuracy of proposed model, four distinct dual-phase microstructures comprising of different ferrite grain size, martensite fraction, and carbon content in martensite were processed by annealing experiments. The true stress–strain curves for various microstructures were predicted with the newly developed micromechanical model. The results of micromechanical model matched closely with those of actual tensile tests. Thus, this micromechanical modeling approach can be used to predict and optimize the tensile flow behavior of dual-phase steels.

36 MATERIALS SCIENCE↗

Effect of Normalizing Temperature on Fracture Characteristic of Tensile and Impact Tested Creep Strength-Enhanced Ferritic P92 Steel

The high-temperature Cr-Mo creep strength-enhanced ferritic (CSEF) steels are mainly used in nuclear and thermal power plants. In the present investigation, a systematic study on fracture surface morphologies of tensile and impact tested specimens and mechanical properties of cast and forged (C&F) P92 steel was performed for various heat treatment conditions. The heat treatment was carried out in normalizing temperature range of 950-1150 °C and then tempered to a fixed tempering temperature of 760 °C. The effect of varying normalizing temperatures before and after tempering on microstructure evolution, tensile properties, Vicker’s hardness and Charpy toughness was studied. The normalizing temperature before and after tempering was having a noticeable effect on mechanical properties of as-received P92 steel. The fracture surface of impact and tensile tested samples was also studied for various normalizing temperatures with or without tempering. Fracture surface morphology was affected by the presence of secondary phase carbide particles. The fraction area of cleavage facets on the tensile fracture surface was found to be increased with an increase in the normalizing temperature. The fractured tensile specimens were characterized by transgranular ductile dimples, tear ridges and transgranular cleavage facets for various heat treatments. The fracture mode of impact tested samples was more complex. It showed both quasi-cleavage facets and ductile dimple tearing for various normalizing temperatures.

36 MATERIALS SCIENCE↗

Effect of Post-deformation Annealing Treatment on the Microstructural Evolution of a Cold-Worked Corrosion-Resistant Superalloy (CRSA) Steel

The post-deformation annealing treatments of a commercial cold-worked corrosion-resistant superalloy steel (Sanicro 28 steel) were carried out at different temperatures in the range of 900-1100 °C for different holding durations of 5, 10, and 15 min. The effects of post-deformation annealing time and temperature on the microstructural evolution and subsequent mechanical properties of the processed Sanicro 28 steel were investigated. The observations indicated that twin–twin hardening in cold deformation condition mainly correlates with abundant nucleation of mechanical twins in multiple directions resulting in considerable strain hardening behavior. Microstructural investigations showed that the static recrystallization takes place after isothermal holding at 900 °C for 5 min. Increasing the annealing temperature from 900 to 1050 °C leads to recrystallization development and grain refinement in the as-recrystallized state. In addition, an increase in annealing duration from 5 to 15 min leads to subgrain coarsening and subsequently larger recrystallized grains size. The occurrence of large proportion of the grain refinement, which is achieved in the first annealing stage at 1050 °C after 5 min, is considered as the main factor for the maximum elongation at this stage.

36 MATERIALS SCIENCE↗

Characterization of Mechanical Properties and Residual Stress in API 5L X80 Steel Welded Joints

The use of high-strength and low-alloy steels, high design factors and increasingly stringent safety requirements have increased the operating pressure levels and, consequently, the need for further studies to avoid and prevent premature pipe failure. To evaluate the possibility of improving productivity in manual arc welding of this type of steel, this work characterizes the mechanical properties and residual stresses in API 5L X80 steel welded joints using the SMAW and FCAW processes. The residual stresses were analyzed using x-ray diffraction with the sin{sup 2}ψ method at the top and root of the welded joints in the longitudinal and transverse directions of the weld bead. The mechanical properties of the welded joints by both processes were characterized in terms of tensile strength, impact toughness and Vickers microhardness in the welded and shot peening conditions. A predominantly compressive residual stress was found, and shot peening increased the tensile strength and impact toughness in both welded joints.

36 MATERIALS SCIENCE↗