Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Influence of growth temperature on electrical, optical, and plasmonic properties of aluminum:zinc oxide films grown by radio frequency magnetron sputtering

We have investigated the responsible mechanism for the observation of metallic conductivity at room temperature and metal-semiconductor transition (MST) at lower temperatures for aluminum-doped zinc oxide (AZO) films. AZO films were grown on glass substrates by radio-frequency magnetron sputtering with varying substrate temperatures (T{sub s}). The films were found to be crystalline with the electrical resistivity close to 1.1 × 10{sup −3} Ω cm and transmittance more than 85% in the visible region. The saturated optical band gap of 3.76 eV was observed for the sample grown at T{sub s} of 400 °C, however, a slight decrease in the bandgap was noticed above 400 °C, which can be explained by Burstein–Moss effect. Temperature dependent resistivity measurements of these highly conducting and transparent films showed a MST at ∼110 K. The observed metal-like and metal-semiconductor transitions are explained by taking into account the Mott phase transition and localization effects due to defects. All AZO films demonstrate crossover in permittivity from positive to negative and low loss in the near-infrared region, illustrating its applications for plasmonic metamaterials, including waveguides for near infrared telecommunication region. Based on the results presented in this study, the low electrical resistivity and high optical transmittance of AZO films suggested a possibility for the application in the flexible electronic devices, such as transparent conducting oxide film on LEDs, solar cells, and touch panels.

36 MATERIALS SCIENCE↗

Epitaxial films of Heusler compound Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} with high crystalline quality grown by off-axis sputtering

Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} films with a surface roughness of 0.12 nm have been grown epitaxially on lattice-matched MgAl{sub 2}O{sub 4} (001) substrates by off-axis sputtering. X-ray diffraction shows pronounced Laue oscillations, rocking curves as narrow as 0.0043°, and clear Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} (111) peaks indicating L2{sub 1} ordering. Magnetic characterizations show a clear magnetocrystalline anisotropy comprising cubic and epitaxy-induced uniaxial terms. Nuclear magnetic resonance measurements reveal L2{sub 1} order of 81% in the Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} films. Magnetotransport measurements show a distinct separation of anisotropic magnetoresistance and ordinary magnetoresistance. These results demonstrate the state-of-the-art crystalline quality and magnetic uniformity of the Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} films.

36 MATERIALS SCIENCE↗

p-type conduction from Sb-doped ZnO thin films grown by dual ion beam sputtering in the absence of oxygen ambient

Sb-doped ZnO (SZO) thin films were deposited on c-plane sapphire substrates by dual ion beam sputtering deposition system in the absence of oxygen ambient. The electrical, structural, morphological, and elemental properties of SZO thin films were studied for films grown at different substrate temperatures ranging from 200 °C to 600 °C and then annealed in situ at 800 °C under vacuum (pressure ∼5 × 10{sup −8} mbar). Films grown for temperature range of 200–500 °C showed p-type conduction with hole concentration of 1.374 × 10{sup 16} to 5.538 × 10{sup 16} cm{sup −3}, resistivity of 66.733–12.758 Ω cm, and carrier mobility of 4.964–8.846 cm{sup 2} V{sup −1} s{sup −1} at room temperature. However, the film grown at 600 °C showed n-type behavior. Additionally, current-voltage (I–V) characteristic of p-ZnO/n-Si heterojunction showed a diode-like behavior, and that further confirmed the p-type conduction in ZnO by Sb doping. X-ray diffraction measurements showed that all SZO films had (002) preferred crystal orientation. X-ray photoelectron spectroscopy analysis confirmed the formation of Sb{sub Zn}–2V{sub Zn} complex caused acceptor-like behavior in SZO films.

36 MATERIALS SCIENCE↗

Second harmonic generation from Ge doped SiO{sub 2} (Ge{sub x}(SiO{sub 2}){sub 1−x}) thin films grown by sputtering

Second-order nonlinear optical properties of sputter-deposited Ge-doped SiO{sub 2} thin films were investigated. It was shown that the second-order nonlinearity of SiO{sub 2}, which vanishes in the electric-dipole approximation due to the centrosymmetric structure, can be significantly enhanced by Ge doping. The observed maximum value of d{sub 33} was 8.2 pm/V, which is 4 times larger than d{sub 22} of β-BaB{sub 2}O{sub 4} crystal. Strong correlation was observed between the d{sub eff} values and the electron spin resonance signals arising from GeP{sub b} centers, suggesting that GeP{sub b} centers are the most probable origin of the large second-order nonlinearity.

36 MATERIALS SCIENCE↗

Elastic properties of B-C-N films grown by N{sub 2}-reactive sputtering from boron carbide targets

Boron-carbon-nitrogen films were grown by RF reactive sputtering from a B{sub 4}C target and N{sub 2} as reactive gas. The films present phase segregation and are mechanically softer than boron carbide films (a factor of more than 2 in Young's modulus). This fact can turn out as an advantage in order to select buffer layers to better anchor boron carbide films on substrates eliminating thermally induced mechanical tensions.

36 MATERIALS SCIENCE↗

Influence of c-axis orientation and scandium concentration on infrared active modes of magnetron sputtered Sc{sub x}Al{sub 1−x}N thin films

Doping of wurtzite aluminium nitride (AlN) with scandium (Sc) significantly enhances the piezoelectric properties of AlN. Sc{sub x}Al{sub 1−x}N thin films with different Sc concentrations (x = 0 to 0.15) were deposited by DC reactive magnetron sputtering. Infrared (IR) absorbance spectroscopy was applied to investigate the Sc concentration dependent shift of the IR active modes E{sub 1}(TO) and A{sub 1}(TO). These results are compared to ab initio simulations, being in excellent agreement with the experimental findings. In addition, IR spectroscopy is established as an economical and fast method to distinguish between thin films with a high degree of c-axis orientation and those exhibiting mixed orientations.

36 MATERIALS SCIENCE↗

Effect of substrate temperature on the magnetic properties of epitaxial sputter-grown Co/Pt

Epitaxial Co/Pt films have been deposited by dc-magnetron sputtering onto heated C-plane sapphire substrates. X-ray diffraction, the residual resistivity, and transmission electron microscopy indicate that the Co/Pt films are highly ordered on the atomic scale. The coercive field and the perpendicular magnetic anisotropy increase as the substrate temperature is increased from 100–250 °C during deposition of the Co/Pt. Measurement of the domain wall creep velocity as a function of applied magnetic field yields the domain wall pinning energy, which scales with the coercive field. Evidence for an enhanced creep velocity in highly ordered epitaxial Co/Pt is found.

36 MATERIALS SCIENCE↗

Temperature dependent structural, optical and hydrophobic properties of sputtered deposited HfO{sub 2} films

Hafnium oxide being high-k dielectric has been successfully utilized in electronic and optical applications. Being thermodynamically stable and having good mechanical strength, it can be used as a protective coating for outdoor HV insulators which are suffering from surface flashover problem due to contamination. In this paper, we are investigating the effect of substrate temperature on structural, optical and hydrophobic properties of hafnium oxide coating deposited over glass insulators by DC magnetron sputtering. X-ray diffraction is applied to determine the crystalline phase and crystallite size of the film. The morphology of the samples is examined using atomic force microscopy. The optical properties are studied using UV-vis-NIR spectrophotometer. The wettability of the film is investigated using contact angle meter. The thickness is measured using surface profilometer and verified through optical data. The relationship between substrate temperature with grain size, roughness, refractive index, and hydrophobicity is manifested. The maximum contact angle for HfO{sub 2} film was found to be 106° at 400°C.

36 MATERIALS SCIENCE↗

Studies on optoelectronic properties of DC reactive magnetron sputtered CdTe thin films

Cadmium telluride continues to be a leading candidate for the development of cost effective photovoltaics for terrestrial applications. In the present work two individual metallic targets of Cd and Te were used for the deposition of CdTe thin films on mica substrates from room temperature to 300 °C by DC reactive magnetron sputtering method. XRD patterns of CdTe thin films deposited on mica substrates exhibit peaks at 2θ = 27.7°, 46.1° and 54.6°, which corresponds to reflection on (1 1 1), (2 2 0) and (3 1 1) planes of CdTe cubic structure. The intensities of XRD patterns increases with the increase of substrate temperature upto 150 °C and then it decreases at higher substrate temperatures. The conductivity of CdTe thin films measured from four probe method increases with the increase of substrate temperature. The activation energies (ΔE) are found to be decrease with the increase of substrate temperature. The optical transmittance spectra of CdTe thin films deposited on mica have a clear interference pattern in the longer wavelength region. The films have good transparency (T > 85 %) exhibiting interference pattern in the spectral region between 1200 – 2500 nm. The optical band gap of CdTe thin films are found to be in the range of 1.48 – 1.57. The refractive index, n decreases with the increase of wavelength, λ. The value of n and k increases with the increase of substrate temperature.

36 MATERIALS SCIENCE↗

Structural and thermal properties of nanocrystalline CuO synthesized by reactive magnetron sputtering

Recent research has shown immense application of metal oxides like CuO, MgO, CaO, Al{sub 2}O{sub 3}, etc. in different areas which includes chemical warfare agents, medical drugs, magnetic storage media and solar energy transformation. Among the metal oxides, CuO nanoparticles are of special interest because of their excellent gas sensing and catalytic properties. In this paper we report structural and thermal properties of CuO synthesized by reactive magnetron DC sputtering. The synthesized nanoparticles were characterized by X-ray diffractometer. The XRD result reveals that as DC power increased from 30W to 80W, size of the CuO nanoparticles increased. The same results have been verified through TEM analysis. Thermal properties of these particles were studied using thermogravimetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exchange bias and crystal structure of epitaxial (111) FePt/BiFeO{sub 3} sputtered thin films

Crystallographic structure and magnetic properties of the epitaxial FePt (10 nm)/BiFeO{sub 3} (BFO) (10 nm) bilayer films grown on (111) SrTiO{sub 3} (STO) substrates with different deposition temperatures of FePt layers (T{sub d}) have been investigated using magnetron sputtering. Out-of-plane radial scan along (111) direction and off-normal (002) azimuthal scan, determined by synchrotron radiation x-ray diffractometry, evidence that the FePt layers were well epitaxially grown on the (111) epitaxial BFO layers for the samples with T{sub d} = 300 and 700 °C. On the contrary, for the bilayer films with T{sub d} = 500 °C, the FePt and BFO layers exhibit low epitaxial quality. Large in-plane exchange bias field (H{sub eb}) values of 45–412 Oe are obtained for the L1{sub 0}-FePt/BFO bilayer films measured with applied field of 12 kOe at room temperature. The change of effective interfacial area, observed by scanning electron microscopy, between FePt island-like particles and BFO continuous layers, and epitaxiality of the bilayer were correlated with the evolution of H{sub eb}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of exchange bias and training effect in ion-beam sputtered Fe{sub 46}Mn{sub 54}/Ni{sub 81}Fe{sub 19} bilayers

We present a remarkable enhancement by 300% of the exchange-bias field at room temperature, without affecting the coercivity value, via optimum magnetic annealing (250 °C/3 kOe) in ion-beam sputtered FeMn(30 nm)/NiFe(10 nm) bilayers. This specific behavior has been attributed to a higher degree of γ-FeMn(111) orientation that offers more interfacial FeMn moments to get pinned with the moments of the adjacent NiFe layer. Unlike the absence of training effect at room temperature, a pronounced training effect and an accompanying magnetization reversal asymmetry are evidenced upon field cooling below 50 K due to the presence of biaxial exchange induced anisotropy across the interdiffused FeMn/NiFe interface. The present findings not only have technological significance but also are of relevance to the understanding of interfacial spin disorder and frustration in these exchange-biased systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial growth of γ-Al{sub 2}O{sub 3} on Ti{sub 2}AlC(0001) by reactive high-power impulse magnetron sputtering

Al{sub 2}O{sub 3} was deposited by reactive high-power impulse magnetron sputtering at 600 °C onto pre-deposited Ti{sub 2}AlC(0001) thin films on α-Al{sub 2}O{sub 3}(0001) substrates. The Al{sub 2}O{sub 3} was deposited to a thickness of 65 nm and formed an adherent layer of epitaxial γ-Al{sub 2}O{sub 3}(111) as shown by transmission electron microscopy. The demonstration of epitaxial growth of γ-Al{sub 2}O{sub 3} on Ti{sub 2}AlC(0001) open prospects for growth of crystalline alumina as protective coatings on Ti{sub 2}AlC and related nanolaminated materials. The crystallographic orientation relationships are γ-Al{sub 2}O{sub 3}(111)//Ti{sub 2}AlC(0001) (out-of-plane) and γ- Al {sub 2}O{sub 3}(22{sup ¯}0)// Ti {sub 2} AlC (112{sup ¯}0) (in-plane) as determined by electron diffraction. Annealing in vacuum at 900 °C resulted in partial decomposition of the Ti{sub 2}AlC by depletion of Al and diffusion into and through the γ-Al{sub 2}O{sub 3} layer.

36 MATERIALS SCIENCE↗

Magnetization dynamics and interface studies in ion-beam sputtered Si/CoFeB(8)/MgO(4)/CoFeB(8)/Ta(5) structures

The interface roughness, Boron distribution in bulk CoFeB and at interface, Gilbert damping constant (α), and inhomogeneous broadening in ion-beam sputtered Si/CoFeB(8)/MgO(4)/CoFeB(8)/Ta(5) structures are found to be sensitive to the MgO growth process. The ion-assist and reactive growth processes that result in sharper interfaces of width ∼0.5 nm lead to smaller α of 0.0050 ± 0.0003 and 0.0060 ± 0.0002 and inhomogeneous broadening ΔH{sub 0} of 3 ± 0.3 and 1 ± 0.3 Oe, respectively. On the other hand, the post-oxidation method results in rough interface and higher retention of Boron in CoFeB leading to higher values for α and ΔH{sub 0} as 0.0080 ± 0.0006 and 5 ± 0.3 Oe, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

One-step aluminium-assisted crystallization of Ge epitaxy on Si by magnetron sputtering

In this work, one-step aluminium-assisted crystallization of Ge on Si is achieved via magnetron sputtering by applying an in-situ low temperature (50 °C to 150 °C) heat treatment in between Al and Ge depositions. The effect of heat treatment on film properties and the growth mechanism of Ge epitaxy on Si are studied via X-ray diffraction, Raman and transmission electron microscopy analyses. Compared with the conventional two-step process, the one-step aluminium-assisted crystallization requires much lower thermal budget and results in pure Ge epitaxial layer, which may be suitable for use as a virtual substrate for the fabrication of III-V solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron transport and defect structure in highly conducting reactively sputtered ultrathin tin oxide films

Electrical conduction behavior of ultrathin (5–110 nm) SnO{sub 2} films reactively sputtered at 150–400 °C substrate temperatures is presented. The surface roughness studies revealed that the films with lower thickness were smoother (≤0.6 nm). Stoichiometry/defect structure of the films obtained from X-ray photoelectron spectroscopy data and electron mobility are found to be dependent on film thickness and substrate temperature. The observed increase in conductivity of semi-metallic films with decrease in film thickness is attributed to changes in defect structure and surface roughness. Highest value of conductivity of about 715 Ω{sup −1} cm{sup −1} is obtained for 5 nm thick films deposited at 300 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Initial stages of ITO/Si interface formation: In situ x-ray photoelectron spectroscopy measurements upon magnetron sputtering and atomistic modelling using density functional theory

Initial stages of indium tin oxide (ITO) growth on a polished Si substrate upon magnetron sputtering were studied experimentally using in-situ x-ray photoelectron spectroscopy measurements. The presence of pure indium and tin, as well as Si bonded to oxygen at the ITO/Si interface were observed. The experimental observations were compared with several atomistic models of ITO/Si interfaces. A periodic model of the ITO/Si interface was constructed, giving detailed information about the local environment at the interface. Molecular dynamics based on density functional theory was performed, showing how metal-oxygen bonds are broken on behalf of silicon-oxygen bonds. These theoretical results support and provide an explanation for the present as well as previous ex-situ and in-situ experimental observations pointing to the creation of metallic In and Sn along with the growth of SiO{sub x} at the ITO/Si interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal conductivity of sputtered amorphous Ge films

We measured the thermal conductivity of amorphous Ge films prepared by magnetron sputtering. The thermal conductivity was significantly higher than the value predicted by the minimum thermal conductivity model and increased with deposition temperature. We found that variations in sound velocity and Ge film density were not the main factors in the high thermal conductivity. Fast Fourier transform patterns of transmission electron micrographs revealed that short-range order in the Ge films was responsible for their high thermal conductivity. The results provide experimental evidences to understand the underlying nature of the variation of phonon mean free path in amorphous solids.

36 MATERIALS SCIENCE↗