Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

A sea-level recorder for tectonic studies

In the past tide gauges have provided valuable information concerning the vertical ground deformation associated with major earthquakes. Although tide-gauge data contains numerous sources of noise, a spacing of less than 40 km between gauges is indicated for a useful study of dilatant behavior, and a spacing of less than 80 km may be adequate for the study of crustal downwarping in island arcs. An inexpensive tide gauge which is designed to provide a continuous record of sea level with a measurement precision of 1 mm is described. Hydraulic filtering is incorporated into the instrument to attenuate daily tides relative to longer period variations of sea level. The instrument is designed to operate from flashlight batteries for a year unattended and to withstand temporary submersion as might be caused by tsunamis. Several of these sea-level recorders have been installed in seismic gaps in the Aleutians and in the Caribbean.

Bilham, R.↗

Polarimeter measures sea state characteristics using emitted infrared radiation

An infrared polarimeter, capable of operating between 1 and 12 micrometers wavelength has been used to measure the polarization of emitted radiation from the sea. The observed polarization at 10.6 micrometers from a smooth sea was found to be positive, indicating the dominance of reflected infrared sky radiation over the emitted. With the appearance of waves, the percent polarization increased, as expected, for a zenith angle well above the Brewster angle for water. This is qualitatively in accordance with a model presented to explain the behavior. Initial analyses indicate that the polarized components of the sea's emitted and reflected radiation are affected by type and direction of waves, angle of viewing, and foam. The effects of variations in these parameters require further delineation. The infrared polarimetric technique appears to be a novel new passive method for remote monitoring of waves.

Egan, W. G.↗

Sea-surface temperature and salinity mapping from remote microwave radiometric measurements of brightness temperature

A technique to measure remotely sea surface temperature and salinity was demonstrated with a dual frequency microwave radiometer system. Accuracies in temperature of 1 C and in salinity of part thousand for salinity greater than 5 parts per thousand were attained after correcting for the influence of extraterrestrial background radiation, atmospheric radiation and attenuation, sea-surface roughness, and antenna beamwidth. The radiometers, operating at 1.43 and 2.65 GHz, comprise a third-generation system using null balancing and feedback noise injection. Flight measurements from an aircraft at an altitude of 1.4 km over the lower Chesapeake Bay and coastal areas of the Atlantic Ocean resulted in contour maps of sea-surface temperature and salinity with a spatial resolution of 0.5 km.

Hans-Juergen, C. B.↗

Measurements at 13.9 GHz of the radar backscattering cross section of the North Sea covered with an artificial surface film

The reduction of the Ku-band (13.9 GHz) normalized radar cross section (NRCS) by an artificial monomolecular surface film (oleyl alcohol) on the sea surface was measured in the North Sea during the 1975 Joint North Sea Wave Project, JONSWAP 75 experiment. The aim of the surface film experiment was to simulate natural surface films which often occur on the ocean surface and are produced by plankton or fish. NRCS measurements were obtained from an aircraft at incidence angles of 41 deg and 47 deg at vertical and horizontal polarizations. For winds between 3.5 and 4.4 m/sec the maximum measured reduction was 7.3 plus or minus 3.5 dB relative to the mean. In-situ measurements showed that the oleyl alcohol film reduced the surface tension from 74 to 43 dyne/cm.

Huehnerfuss, H.↗

A large-scale numerical model of sea ice

The described large-scale sea ice model, which is capable of coupling with atmospheric and oceanic models of comparable resolution, simulates the yearly cycle of ice in both the Northern and Southern Hemispheres. Model results for the yearly cycle of sea ice thickness and extent in both the Arctic and the Antarctic are presented. Horizontally the model resolution is approximately 200 km, while vertically four layers - ice, snow, ocean, and atmosphere - are considered. Thermodynamic processes based on energy balances at the various interfaces and dynamic processes based on wind stress, water stress, Coriolis force, internal ice resistance, and the stress from the tilt of the sea surface are incorporated. It is assumed that the ice within a given grid square is of uniform thickness, although each square has a variable percentage of its area ice free.

Parkinson, C. L.↗

Guidelines for the air-sea interaction special study: An element of the NASA climate research program, JPL/SIO workshop report

A program in the area of air sea interactions is introduced. A space capability is discussed for global observations of climate parameters which will contribute to the understanding of the processes which influence climate and its predictability. The following recommendations are some of the suggestions made for air sea interaction studies: (1) a major effort needs to be devoted to the preparation of space based climatic data sets; (2) NASA should create a group or center for climatic data analysis due to the substantial long term effort that is needed in research and development; (3) funding for the analyses of existing data sets should be augmented and continued beyond the termination of present programs; (4) NASA should fund studies in universities, research institutions and governments' centers; and (5) the planning for an air sea interaction mission should be an early task.

Source record↗

Effect of a Pacific sea-surface temperature anomaly on the circulation over North America: A numerical experiment with the GLAS model

A numerical experiment was carried out to determine the effect of sea surface temperature anomalies over the Pacific on the circulation over North America. The sea surface temperature (SST) anomaly pattern chosen for this study was similar to the one observed during January 1977. It is shown that a cold sea surface temperature anomaly over the Pacific produces a strong southward flow over the United States and colder temperature in eastern Canada and the United States, as it was observed during the 1977 winter. The results indicate that the SST anomaly over the Pacific can produce a significant downstream effect over the continental United States.

Shukla, J.↗

Estimation of mean sea surfaces in the North Atlantic, the Pacific and the Indian Ocean using GEOS-3 altimeter data

The sea surface heights above the reference ellipsoid were determined for several regions of the world's ocean using data from the radar altimeter on board the GEOS-3 satellite in conjunction with precise orbital position information derived from laser data. The resolution of the estimated sea surfaces varied from 0.25 degrees off the east coast of the United States to about 2 degrees in the Indian Ocean near Australia. The rms crossover discrepancy after adjustment varied from 30 cm to 70 cm depending on geographic location. Comparison of the altimeter derived mean sea surface in the North Atlantic with the 5 x 5 ft GEM-8 detailed gravimetric geoid indicated a relative consistency of better than one meter.

Marsh, J. G.↗

Sea ice simulations based on fields generated by the GLAS GCM

The GLAS General Circulation Model (GCM) was applied to the four-month simulation of the thermodynamic part of the Parkinson-Washington sea ice model using atmospheric boundary conditions. The sea ice thickness and distribution were predicted for the Jan. 1-Apr. 30 period using the GCM-fields of solar and infrared radiation, specific humidity and air temperature at the surface, and snow accumulation; the sensible heat and evaporative surface fluxes were consistent with the ground temperatures produced by the ice model and the air temperatures determined by the atmospheric concept. It was concluded that the Parkinson-Washington sea ice model results in acceptable ice concentrations and thicknesses when used with GLAS GCM for the Jan.-Apr. period suggesting the feasibility of fully coupled ice-atmosphere simulations with these two approaches.

Parkinson, C. L.↗

Sensitivity of a climatologically-driven sea ice model to the ocean heat flux

Ocean heat flux sensitivity was studied on a numerical model of sea ice covering the Weddell Sea region of the southern ocean. The model is driven by mean monthly climatological atmospheric variables. For each model run, the ocean heat flux is uniform in both space and time. Ocean heat fluxes below 20 W m to the minus 2 power do not provide sufficient energy to allow the ice to melt to its summertime thicknesses and concentrations by the end of the 14 month simulation, whereas ocean heat fluxes of 30 W m to the minus 2 power and above result in too much ice melt, producing the almost total disappearance of ice in the Weddell Sea by the end of the 14 months. These results are dependent on the atmospheric forcing fields.

Parkinson, C. L.↗

Seasonal cycle of heights, temperatures and sea level pressure over the Northern Hemisphere

The annual and semiannual cycles of sea level pressure and surface temperature over the Northern Hemisphere are documented. The annual cycles in the geopotential height fields for several levels are also examined. It was found that the continental winter maxima in the sea level pressure field extended upward to near the 700 mb level. At 500 mb and above, however, they found that the annual cycle exhibits summertime maxima over both sea and land.

Doty, B.↗

The Effect of Sea-Surface Sun Glitter on Microwave Radiometer Measurements

A relatively simple model for the microwave brightness temperature of sea surface Sun glitter is presented. The model is an accurate closeform approximation for the fourfold Sun glitter integral. The model computations indicate that Sun glitter contamination of on orbit radiometer measurements is appreciable over a large swath area. For winds near 20 m/s, Sun glitter affects the retrieval of environmental parameters for Sun angles as large as 20 to 25 deg. The model predicted biases in retrieved wind speed and sea surface temperature due to neglecting Sun glitter are consistent with those experimentally observed in SEASAT SMMR retrievals. A least squares retrieval algorithm that uses a combined sea and Sun model function shows the potential of retrieving accurate environmental parameters in the presence of Sun glitter so long as the Sun angles and wind speed are above 5 deg and 2 m/s, respectively.

Wentz, F. J.↗

Measurements of CO and CH4 in the troposphere over Saudi Arabia, India, and the Arabian Sea during the 1979 International Summer Monsoon Experiment /MONEX/

During the 1979 Summer MONEX, 150 air samples collected over Saudi Arabia, India, and the Arabian Sea were analyzed for CO and CH4. Near Dhahran and over the Ganges Valley there were high concentrations of CO, around 300 ppbv, in the boundary layer. Out over the Saudi Arabian desert there was no sharp increase in the boundary layer. It is suggested that these high concentrations originate from pollution sources. Low values of CO, down to 80 ppbv, are found over the Arabian Sea as the monsoon progresses, and these may originate from the Southern Hemisphere. Methane over Saudi Arabia (1.59 ppmv) is a little higher than that over the Arabian Sea (1.54 ppmv) probably because the latter region is influenced by air from the Southern Hemisphere.

Newell, R. E.↗

Large-scale variations in observed Antarctic Sea ice extent and associated atmospheric circulation

The 1974 Antarctic large scale sea ice extent is studied from data from Nimbus 2 and 5 and temperature and sea level pressure fields from the Australian Meteorological Data Set. Electrically Scanning Microwave Radiometer data were three-day averaged and compared with 1000 mbar atmospheric pressure and sea level pressure data, also in three-day averages. Each three-day period was subjected to a Fourier analysis and included the mean latitude of the ice extent and the phases and percent variances in terms of the first six Fourier harmonics. Centers of low pressure were found to be generally east of regions which displayed rapid ice growth, and winds acted to extend the ice equatorward. An atmospheric response was also noted as caused by the changing ice cover.

Cavalieri, D. J.↗

Global sea level trend in the past century

Data derived from tide-gauge stations throughout the world indicate that the mean sea level rose by about 12 centimeters in the past century. The sea level change has a high correlation with the trend of global surface air temperature. A large part of the sea level rise can be accounted for in terms of the thermal expansion of the upper layers of the ocean. The results also represent weak indirect evidence for a net melting of the continental ice sheets.

Gornitz, V.↗

Sea foam reflectance and influence on optimum wavelength for remote sensing of ocean aerosols

According to previous investigations, sea foam is a major variable in the accurate determination of aerosol turbidity over the oceans with remote-sensing systems. As a result, tests have been conducted to measure sea foam reflectance at wavelengths from 0.55 micron to 2.8 microns. Data from the tests offer an improved knowledge of the effects of sea foam on radiation upwelled from the ocean surface at near-infrared wavelengths. Application of the new data suggests potential for a 40 percent improvement in signal to noise characteristics of aerosol measurements over the oceans if a 1.56 micron waveband is used instead of 0.75 micron.

Whitlock, C. H.↗

Aircraft measurement of sea surface temperature during the West Coast Experiment

During the West Coast Experiment in March 1977, a test was conducted to ascertain the effectiveness of using remote sensing techniques to estimate sea surface temperature (SST) from infrared (IR) emissions of the sea surface. Aircraft flights were made over three buoys moored in southern California coastal waters, and data was collected of sea surface emissions at thermal IR wavelengths (7.95-13.5 micrometers). SST obtained from the remote sensing measurements were compared with in situ SST measured with thermistors mounted on the buoys. The remotely determined SST were from 1.4-2.9 C lower than the in situ measurements. Several factors are discussed that could account for the differences.

Schieldge, J. P.↗

Mid-latitude model analysis of solar radiation, the upper layers of the sea, and seasonal climate

A simplified, time-dependent energy balance climate model is run at the latitude belt 40-50 deg N. The model solves for the temperatures of the land, air, and 12 vertical oceanic layers, and it includes a wind stirred mixed layer. A change in model ocean optical turbidity from relatively clear (Jerlov 1) to particle rich (Jerlov III) conditions decreases the effective thickness of the oceanic layer in which heat is stored seasonally and increases the seasonal variation of sea surface temperature by 2-3 C. A decrease in the liquid water content of clouds by a factor of 4 warms the model climate and increases the seasonal variation of sea surface temperatures by 2-3 C. A 2-3 C change in the seasonal variation of sea surface temperature is also obtained by varying oceanic mixing through a factor of 2 change in the surface wind speed.

Charlock, T. P.↗