Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAPPHIRE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Molecular beam epitaxy growth of SnO{sub 2} using a tin chemical precursor

The authors report on the development of a molecular beam epitaxy approach for atomic layer controlled growth of phase-pure, single-crystalline epitaxial SnO{sub 2} films with scalable growth rates using a highly volatile precursor (tetraethyltin) for tin and rf-oxygen plasma for oxygen. Smooth, epitaxial SnO{sub 2} (101) films on r-sapphire (101{sup ¯}2) substrates were grown as a function of tin precursor flux and substrate temperatures between 300 and 900 °C. Three distinct growth regimes were identified where SnO{sub 2} films grew in a reaction-, flux-, and desorption-limited mode, respectively, with increasing substrate temperature. In particular, with increasing tin flux, the growth rates were found to increase and then saturate indicating any excess tin precursor desorbs above a critical beam equivalent pressure of tin precursor. Important implications of growth kinetic behaviors on the self-regulating stoichiometric growth of perovskite stannates are discussed.

36 MATERIALS SCIENCE↗

Growth, structure, and high temperature stability of zirconium diboride thin films

Morphologically stable, electrically conductive thin films are required for emerging harsh environment sensors that can operate at temperatures above 1000 °C. Zirconium diboride (ZrB{sub 2}) is an ultrahigh temperature ceramic with a melting temperature greater than 3200 °C and in bulk form has an electrical conductivity of ∼10{sup 7 }S/m. Thin films of varying Zr:B ratio have been deposited on sapphire substrates by electron beam coevaporation from elemental sources. An appropriate ratio of the elemental fluxes was determined to produce nearly stoichiometric ZrB{sub 2} thin films. Films deposited at ambient substrate temperatures are amorphous as measured by x-ray diffraction, while films grown at 600 °C show textured ZrB{sub 2} nanocrystallites in an amorphous matrix, regardless of composition. When annealed in ultrahigh vacuum at 800 and 1000 °C for 1 h, nanocrystalline films show further grain growth with a 〈101{sup ¯}0〉 ZrB{sub 2} preferred orientation normal to the substrate, while the low nucleation rate in the amorphous films inhibits the formation of any substantial grains. Film conductivity ranges between 0.13 and 6.3 × 10{sup 5 }S/m, increasing with zirconium content and crystallite grain size. Besides grain growth, no micron-scale structural or morphological changes were observed with annealing, suggesting that ZrB{sub 2} films can act as stable electrodes in high temperature environments.

36 MATERIALS SCIENCE↗

Effects of N{sub 2}O gas addition on the properties of ZnO films grown by catalytic reaction-assisted chemical vapor deposition

The influence of N{sub 2}O gas addition on the properties of zinc oxide (ZnO) films grown on a-plane (11–20) sapphire (a-Al{sub 2}O{sub 3}) substrates was investigated, using a chemical vapor deposition method based on the reaction between dimethylzinc and high-temperature H{sub 2}O produced by a catalytic H{sub 2}-O{sub 2} reaction on platinum (Pt) nanoparticles. The addition of N{sub 2}O was found to increase the size of the crystalline facets and to improve the crystal orientation along the c-axis. The electron mobility at 290 K was also increased to 234 cm{sup 2}/Vs following the addition of N{sub 2}O gas at a pressure of 3.2 × 10{sup −3 }Pa. In addition, the minimum full width at half maximum of the most intense photoluminescence peak derived from neutral donor bound excitons at 10 K decreased to 0.6 meV by the addition of N{sub 2}O gas at a pressure of 3.1 × 10{sup −2 }Pa.

36 MATERIALS SCIENCE↗

Engineering catalytic activity via ion beam bombardment of catalyst supports for vertically aligned carbon nanotube growth

Carbon nanotube growth depends on the catalytic activity of metal nanoparticles on alumina or silica supports. The control on catalytic activity is generally achieved by variations in water concentration, carbon feed, and sample placement on a few types of alumina or silica catalyst supports obtained via thin film deposition. We have recently expanded the choice of catalyst supports by engineering inactive substrates like c-cut sapphire via ion beam bombardment. The deterministic control on the structure and chemistry of catalyst supports obtained by tuning the degree of beam-induced damage have enabled better regulation of the activity of Fe catalysts only in the ion beam bombarded areas and hence enabled controllable super growth of carbon nanotubes. A wide range of surface characterization techniques were used to monitor the catalytically active surface engineered via ion beam bombardment. The proposed method offers a versatile way to control carbon nanotube growth in patterned areas and also enhances the current understanding of the growth process. As a result, with the right choice of water concentration, carbon feed and sample placement, engineered catalyst supports may extend the carbon nanotube growth yield to a level that is even higher than the ones reported here, and thus offers promising applications of carbon nanotubes in electronics, heat exchanger, and energy storage.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High temperature thermographic measurements of laser heated silica

In situ spatial and temporal surface temperature profiles of CO{sub 2} laser-heated silica were obtained using a long wave infrared (LWIR) HgCdTe camera. Solutions to the linear diffusion equation with volumetric and surface heating are shown to describe the temperature evolution for a range of beam powers, over which the peak surface temperature scales linearly with power. These solutions were used with on-axis steady state and transient experimental temperatures to extract thermal diffusivity and conductivity for a variety of materials, including silica, spinel, sapphire, and lithium fluoride. Experimentally-derived thermal properties agreed well with reported values and, for silica, thermal conductivity and diffusivity are shown to be approximately independent of temperature between 300 and 2800K. While for silica our analysis based on a temperature independent thermal conductivity is shown to be accurate, for other materials studied this treatment yields effective thermal properties that represent reasonable approximations for laser heating. Implementation of a single-wavelength radiation measurement in the semi-transparent regime is generally discussed, and estimates of the apparent temperature deviation from the actual outer surface temperature are also presented. The experimental approach and the simple analysis presented yield surface temperature measurements that can be used to validate more complex physical models, help discriminate dominant heat transport mechanisms, and to predict temperature distribution and evolution during laser-based material processing.

42 ENGINEERING↗

Selective Near-UV Ablation of Subgingival Dental Calculus: Measurement of Removal Rates

A noncontact profilometer (laser triangulation) was used to measure the removal rates of subgingival dental calculus irradiated with a frequency-doubled Ti:sapphire laser (60-ns pulse duration, 400-nm wavelength, 10-Hz repetition rate, 7-mJ pulse energy). Profilometer traces before and after irradiation were used to create a removal map with 4-μm axial and 15-μm transverse resolution. Twenty-three teeth (15 with calculus and 8 pristine) were irradiated at 90° and 45° under a cooling water spray with a super-Gaussian beam (~300-μm diameter). Subgingival calculus was selectively removed at 5.6 and 4.0 J/cm2 for 90° and 45°, respecetively, within a range of rates, between 2 to 9 μm/pulse. These ablation rates were constant during these exposures. For comparison, pristine cementum irradiated for 10 min at the same peak fluence and pulse repetition rate showed only craters, 15 to 50 μm deep, corresponding to an equivalent removal rate three orders of magnitude smaller than that obtained for calculus. Pristine enamel was not removed under the same irradiation conditions.

calculus↗

Dose ratio proton radiography using the proximal side of the Bragg peak

Purpose: In recent years, there has been a movement toward single-detector proton radiography, due to its potential ease of implementation within the clinical environment. One such single-detector technique is the dose ratio method in which the dose maps from two pristine Bragg peaks are recorded beyond the patient. To date, this has only been investigated on the distal side of the lower energy Bragg peak, due to the sharp falloff. The authors investigate the limits and applicability of the dose ratio method on the proximal side of the lower energy Bragg peak, which has the potential to allow a much wider range of water-equivalent thicknesses (WET) to be imaged. Comparisons are made with the use of the distal side of the Bragg peak. Methods: Using the analytical approximation for the Bragg peak, the authors generated theoretical dose ratio curves for a range of energy pairs, and then determined how an uncertainty in the dose ratio would translate to a spread in the WET estimate. By defining this spread as the accuracy one could achieve in the WET estimate, the authors were able to generate lookup graphs of the range on the proximal side of the Bragg peak that one could reliably use. These were dependent on the energy pair, noise level in the dose ratio image and the required accuracy in the WET. Using these lookup graphs, the authors investigated the applicability of the technique for a range of patient treatment sites. The authors validated the theoretical approach with experimental measurements using a complementary metal oxide semiconductor active pixel sensor (CMOS APS), by imaging a small sapphire sphere in a high energy proton beam. Results: Provided the noise level in the dose ratio image was 1% or less, a larger spread of WETs could be imaged using the proximal side of the Bragg peak (max 5.31 cm) compared to the distal side (max 2.42 cm). In simulation, it was found that, for a pediatric brain, it is possible to use the technique to image a region with a square field equivalent size of 7.6 cm{sup 2}, for a required accuracy in the WET of 3 mm and a 1% noise level in the dose ratio image. The technique showed limited applicability for other patient sites. The CMOS APS demonstrated a good accuracy, with a root-mean-square-error of 1.6 mm WET. The noise in the measured images was found to be σ = 1.2% (standard deviation) and theoretical predictions with a 1.96σ noise level showed good agreement with the measured errors. Conclusions: After validating the theoretical approach with measurements, the authors have shown that the use of the proximal side of the Bragg peak when performing dose ratio imaging is feasible, and allows for a wider dynamic range than when using the distal side. The dynamic range available increases as the demand on the accuracy of the WET decreases. The technique can only be applied to clinical sites with small maximum WETs such as for pediatric brains.

60 APPLIED LIFE SCIENCES↗

SU-E-I-19: Optimization of Low Contrast Detectability Across Two CT Manufacturers

Purpose: Our goal was to evaluate low contrast detectability (LCD) for abdominal CT protocols across two CT scanner manufacturers, while producing a similar noise texture and CTDIvol for acquired images. Methods: A CIRS tissue equivalent LCD phantom containing three columns of 7 spherical targets, ranging from 10 mm to 2.4 mm, that are 5, 10, and 20 HU below the background matrix (HUBB) was scanned using two a GE HD750 64 slice scanner and a Siemens Somatom Definition AS 64 slice scanner. Protocols were designed to deliver a CTDIvol of 12.26 mGy and images were reconstructed with FBP, ASIR and Sapphire. Comparisons were made with those algorithms that had matching noise power spectrum peaks (NPS). NPS information was extracted from a previously published article that matched NPS peak frequencies across manufacturers by calculating the NPS from uniform phantom images reconstructed with several IR algorithms. Results: The minimum detectable lesion size in the 20 HUBB and 10 HUBB column was 6.3 mm, and 10 mm in the 5 HUBB column for the GE HD 750 scanner. The minimum detectable lesion size in the 20 HUBB column was 4.8 mm, in the 10 HUBB column, 9.5 mm, and the 5 HUBB column, 10 mm for the Siemens Somatom Definition AS. Conclusion: Reducing radiation dose while improving or maintaining LCD is possible with application of IR. However, there are several different IR algorithms, with each generating a different resolution and noise texture. In multi-manufacturer settings, matching only the CTDIvol between manufacturers may Result in a loss of clinically relevant information.

60 APPLIED LIFE SCIENCES↗

Chemical transformations in the W-Al{sub 2}O{sub 3} system under pressure P = 1 bar near the melting point of aluminum oxide

The W-Al{sub 2}O{sub 3} system has been considered at a temperature of 2400 K and a pressure of 1 bar. The main chemical processes providing the interaction between the components of the system have been determined. It is shown that evaporation of Al{sub 2}O{sub 3} into the gas phase gives rise to numerous reactions, which involve not only tungsten but also Al{sub 2}O{sub 3} melt. It is concluded that such interactions can be reduced by decreasing the Al{sub 2}O{sub 3} evaporation, which can be done by increasing the inert gas pressure. This approach makes it possible both to optimize the parameters of sapphire crystal growth and increase the lifetime of a tungsten heater and other units of crystallization systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of the types and densities of dislocations in GaN epitaxial layers of different thicknesses by optical and atomic force microscopy

The change in the dislocation density on the surface of GaN epitaxial layers, which were grown by hydride vapor-phase epitaxy on sapphire substrates with c and r orientations, has been investigated by optical and atomic force microscopy (AFM). It is shown that the observed decrease in the density of threading dislocations with an increase in the layer thickness is related to the annihilation of mixed dislocations. The experimental and theoretical data on the change in the density of mixed dislocations with an increase in the epitaxial-layer thickness are in good correspondence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain relaxation in multilayer III–N structures on Si(111) substrates

X-ray diffractometry and X-ray scattering reciprocal space maps have been used to study strain relaxation in a complex buffer composed of seven intermediate layers of Al{sub x}Ga{sub 1−x}N composition with different values of x, decreasing with an increase in the distance from the substrate. The layers have been grown by hydride metalorganic vapor phase epitaxy on silicon and sapphire substrates. Differences in the structural quality of the first four layers of a multilayer buffer grown on different substrates have been revealed. A gradual smoothing out of these differences in the next three layers with an increase in the layer serial number has been shown. The last grown intermediate Al{sub x}Ga{sub 1−x}N layer and the GaN layer grown on it have identical thicknesses and degrees of mosaicity, regardless of the substrate type. Device structures grown on a complex buffer demonstrate emission in approximately the same wavelength range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calibration of X-Ray diffractometer by the experimental comparison method

A software for calibrating an X-ray diffractometer with area detector has been developed. It is proposed to search for detector and goniometer calibration models whose parameters are reproduced in a series of measurements on a reference crystal. Reference (standard) crystals are prepared during the investigation; they should provide the agreement of structural models in repeated analyses. The technique developed has been used to calibrate Xcalibur Sapphire and Eos, Gemini Ruby (Agilent) and Apex x8 and Apex Duo (Bruker) diffractometers. The main conclusions are as follows: the calibration maps are stable for several years and can be used to improve structural results, verified CCD detectors exhibit significant inhomogeneity of the efficiency (response) function, and a Bruker goniometer introduces smaller distortions than an Agilent goniometer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Peculiarities of the behavior of the W–Al{sub 2}O{sub 3} system in a controlled reducing atmosphere

The W–Al{sub 2}O{sub 3} system at T = 2400 K and standard pressure (controlled Ar + H{sub 2} atmosphere) has been calculated by stochastic simulation. It is shown that the presence of hydrogen leads to the formation of aluminum hydrides, hydrogen oxides, and aluminum hydroxides; the compounds from the two latter groups (except for water) can interact directly with tungsten. The main chemical reactions occurring in the system are determined, based on which a conclusion about the cyclic character of the processes is drawn. Some recommendations on the composition and pressure of controlled atmosphere for growing sapphire crystals are given.

36 MATERIALS SCIENCE↗

Mechanisms of Interaction of Molybdenum and Tungsten Polyoxide with Aluminum Oxide Melt under Reducing Conditions

The main chemical reactions between Mo and W polyoxides and Al{sub 2}O{sub 3} melt in a controlled Ar + H{sub 2} atmosphere (T = 2400 K, P = 1 bar) during sapphire growth by horizontal directional solidification have been investigated. Under these thermodynamic conditions, the melt and products of its dissociative evaporation may actively react with the tungsten heater and molybdenum thermal screens of the crystallization system. It is shown that the polyoxides formed during evaporation do not directly interact with the melt; this interaction occurs only with participation of reagents exhibiting pronounced reducing properties (Al, H{sub 2}, H, WO, Al{sub 2}O, AlH, AlH{sub 2}, AlH{sub 3}). It is established that most of processes occur with participation of aluminum hydrides. A particular role of Mo(W) dioxide–W(Mo) polyoxide functional pairs in the interaction with the melt is determined.

36 MATERIALS SCIENCE↗

Faraday Effect in Rubidium Atomic Layers Thinner than 100 nm

The interaction of rubidium atoms with sapphire cell windows at an interwindow distance L = 40–100 nm is studied. For studies, we used the Faraday rotation (FR) effect (rotation of the plane of radiation polarization in a magnetic field) in a thin rubidium atom vapor column for D{sub 1, 2} lines. When L decreases from 100 to 40 nm, a red shift of the FR signal frequency is detected: it increases from 10 to 250 MHz, and the broadening of the low-frequency wing increases to ~1 GHz. The atomic transition F{sub g} = 3 → F{sub e} = 2 for the D{sub 1} line of {sup 85}Rb is shown to be convenient for such investigations, since it can be spectrally separated from other strongly broadened atomic transitions. Coefficients C{sub 3}, which characterize the atom–surface interaction for the D{sub 1} and D{sub 2} lines of Rb, are determined. An additional red frequency shift takes place at a nanocell thickness L < 100 nm when the Rb atom density increases, and this shift is absent at large L. A practical application of an FR signal for measuring strong magnetic fields of several kilogausses is described.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of the factors determining the modulation characteristics of gas-discharge IR sources

The effect of design parameters and voltage of pulsed cesium sources with sapphire envelopes on their modulation characteristics are considered for the following combinations of operating parameters: the average repetition rate of current pulses up to f{sub i} = 1.0 kHz and the consumed electric power up to P{sub l} = 3 kW for the spectral range 3-5 {mu}m; f{sub i} = 1.0-8.0 kHz and P{sub l} up to 1.0 kW for the spectral range 0.8-2.7 {mu}m. Recommendations on further improvement of the modulation characteristics of lamps are given.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Extended plasma channels created by UV laser in air and their application to control electric discharges

Results are presented from a series of experimental and theoretical studies on creating weakly ionized extended plasma channels in atmospheric air by 248-nm UV laser radiation and their application to control long high-voltage discharges. The main mechanisms of air ionization by UV laser pulses with durations from 100 fs to 25 ns and intensities in the ranges of 3×10{sup 11}–1.5×10{sup 13} and 3×10{sup 6}–3×10{sup 11} W/cm{sup 2}, respectively, which are below the threshold for optical gas breakdown, as well as the main relaxation processes in plasma with a density of 10{sup 9}–10{sup 17} cm{sup −3}, are considered. It is shown that plasma channels in air can be efficiently created by amplitude-modulated UV pulses consisting of a train of subpicosecond pulses producing primary photoelectrons and a long UV pulse suppressing electron attachment and sustaining the density of free electrons in plasma. Different modes of the generation and amplification of trains of subterawatt subpicosecond pulses and amplitude-modulated UV pulses with an energy of several tens of joules were implemented on the GARPUN-MTW hybrid Ti:sapphire-KrF laser facility. The filamentation of such UV laser beams during their propagation in air over distances of up to 100 m and the parameters of the corresponding plasma channels were studied experimentally and theoretically. Laser initiation of high-voltage electric discharges and control of their trajectories by means of amplitude-modulated UV pulses, as well as the spatiotemporal structure of breakdowns in air gaps with length of up to 80 cm, were studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Luminescent and structural properties of ZnO-Ag films

ZnO-Ag thin films were prepared by a two-stage method on glass and sapphire substrates. Ag doping was carried out by a method of close space sublimation at atmospheric pressure. The film thickness is varied from 0.6 to 7 {mu}m. The structural and radiative properties were explored by X-ray diffraction technique, atomic force microscopy, photoluminescence and cathodoluminescence spectroscopy. The influence of the fabricating conditions on the properties of ZnO-Ag films is studied. It is found that the Ag doping modifies the crystalline structure of the films and promotes the oriented growth of monocrystalline blocks with the size of 500-2000 nm in the [0002] direction. Improvement of the crystalline quality correlates with the change of the radiative characteristics of the films. The origin of emission centers is discussed.

36 MATERIALS SCIENCE↗