Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quantum light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Combining quantum noise reduction resources: A practical approach

Optomechanical sensors are capable of transducing external perturbations to resolvable optical signals. A particular regime of interest is that of high-bandwidth force detection, where an impulse is delivered to the system over a short period of time. Exceedingly sensitive impulse detection has been proposed to observe very weak signals like those due to long-range interactions with dark matter that require much higher sensitivities than current sensors can provide. Quantum resources to go beyond the traditional standard quantum limit of these sensors include squeezing of the light used to transduce the signal, backaction evasion by measuring the optimal quadrature, and quantum nondemolition (QND) measurements that reduce backaction directly. These methods have been developed in the context of gravitational wave detection for target frequencies in the audio band range. Here, we provide the theoretical limits to quantum noise reduction for higher and broader frequency targets, such as those from dark matter signals, while combining quantum-enhanced readout techniques based on squeezed light and QND measurements with optomechanical sensors. Here, we demonstrate that backaction evasion through QND techniques dramatically reduces the technical challenges presented when using squeezed light for broadband force detection, paving the way for combining multiple quantum noise reduction techniques for enhanced sensitivity in the context of impulse metrology.

Optomechanics↗

Electrochemical Characterization of Photo-Driven Hole-Scavenging by Cadmium Sulfide Quantum Dot-Nitrogenase Biohybrid Complexes

Light-driven biohybrid systems that couple semiconductor nanocrystals with enzymes offer a promising strategy for solar-to-chemical energy-conserving reduction reactions, yet are often limited by inefficient hole scavenging. Hole scavenging is critical for maintaining charge separation in the light-absorbing electron donor molecule and, thus, for sustaining catalytic turnover, making quantification essential to improving system efficiency. Here, we introduce a photoelectrochemical approach for real-time monitoring of hole scavenging in cadmium sulfide (CdS) quantum dot (QD)-nitrogenase MoFe protein biohybrids that catalyze the reduction of H+ and N2. Using hydroquinone (HQ) as the sacrificial electron donor (SED), oxidation of HQ to benzoquinone (BQ) by photogenerated valence-band holes is coupled to the electrochemical reduction of BQ at an electrode, enabling quantification of the hole-scavenging reaction via chronoamperometry. This approach provides a continuous, real-time readout of charge-transfer dynamics under illumination. Systematic variation of light intensity and donor concentration reveals that hole scavenging scales with photon flux and exhibits a non-linear dependence on SED concentration, with an optimum at intermediate HQ concentrations. These results establish chronoamperometry as a powerful tool for probing photoinduced charge transfer, advancing the quantitative understanding of hole-scavenging in biohybrid systems, and offering a generalizable framework for optimizing solar-driven biocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward real-time quantum imaging with a single pixel camera

In this paper, we present a workbench for the study of real-time quantum imaging by measuring the frame-by-frame quantum noise reduction of multi-spatial-mode twin beams generated by four wave mixing in Rb vapor. Exploiting the multiple spatial modes of this squeezed light source, we utilize spatial light modulators to selectively pass macropixels of quantum correlated modes from each of the twin beams to a high quantum efficiency balanced detector. Finally, in low-light-level imaging applications, the ability to measure the quantum correlations between individual spatial modes and macropixels of spatial modes with a single pixel camera will facilitate compressive quantum imaging with sensitivity below the photon shot noise limit.

47 OTHER INSTRUMENTATION↗

Gravitational Wilson loop in discrete quantum gravity

Results for the gravitational Wilson loop, in particular, the area law for large loops in the strong coupling region, and the argument for an effective positive cosmological constant, discussed in a previous paper, are extended to other proposed theories of discrete Euclidean quantum gravity in the strong coupling limit. We argue that the area law is a generic feature of almost all nonperturbative Euclidean lattice formulations, for sufficiently strong gravitational coupling. The effects on gravitational Wilson loops of the inclusion of various types of light matter coupled to lattice quantum gravity are discussed as well. One finds that significant modifications to the area law can only arise from extremely light matter particles. The paper ends with some general comments on possible, physically observable, consequences.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Shockley-Read-Hall recombination in P3HT:PCBM solar cells as observed under ultralow light intensities

We present light intensity dependent measurements of the quantum efficiency of P3HT:PCBM photovoltaic devices. Unlike previous studies we focus on ultralow light intensities down to 10{sup -3} mW/cm{sup 2}. We find that although when the devices are excited at intensities close to 1 Sun they exhibit very little bias or light intensity dependence, this is clearly not the case for light intensities below 1 mW/cm{sup 2}, where the cell's efficiency becomes highly dependent on the bias and light intensity. Using a simple model for the device efficiency we can fit the experimental data across a wide range of parameters and thus separate the effects of generation efficiency (geminate recombination) and charge recombination. Our finding suggests that recombination through trap (charge transfer) states is an important loss mechanism and we are able to quantify the density and depth of these states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic and Optical Properties of Two-Dimensional GaN from First-Principles

Gallium nitride (GaN) is a vital commercial semiconductor for solid-state lighting applications. Atomically thin GaN, a recently synthesized two-dimensional material, is of particular interest because the extreme quantum confinement enables additional control of its light-emitting properties. We performed first-principles calculations based on density functional and many-body perturbation theory to investigate the electronic, optical, and excitonic properties of monolayer and bilayer two-dimensional (2D) GaN as a function of strain. These findings demonstrate that light emission from monolayer 2D GaN is blueshifted into the deep ultraviolet range, which is promising for sterilization and water-purification applications. Light emission from bilayer 2D GaN occurs at a similar wavelength to its bulk counterpart due to the cancellation of the effect of quantum confinement on the optical gap by the quantum-confined Stark shift. Polarized light emission at room temperature is possible via uniaxial in-plane strain, which is desirable for energy-efficient display applications. We compare the electronic and optical properties of freestanding two-dimensional GaN to atomically thin GaN wells embedded within AlN barriers in order to understand how the functional properties are influenced by the presence of barriers. Our results offer microscopic understanding of the electronic and optical characteristics of GaN at the few-layer regime.

36 MATERIALS SCIENCE↗

Effect of a low-temperature-grown GaAs layer on InAs quantum-dot photoluminescence

The photoluminescence of InAs semiconductor quantum dots overgrown by GaAs in the low-temperature mode (LT-GaAs) using various spacer layers or without them is studied. Spacer layers are thin GaAs or AlAs layers grown at temperatures normal for molecular-beam epitaxy (MBE). Direct overgrowth leads to photoluminescence disappearance. When using a thin GaAs spacer layer, the photoluminescence from InAs quantum dots is partially recovered; however, its intensity appears lower by two orders of magnitude than in the reference sample in which the quantum-dot array is overgrown at normal temperature. The use of wider-gap AlAs as a spacer-layer material leads to the enhancement of photoluminescence from InAs quantum dots, but it is still more than ten times lower than that of reference-sample emission. A model taking into account carrier generation by light, diffusion and tunneling from quantum dots to the LT-GaAs layer is constructed.

36 MATERIALS SCIENCE↗

Controlled synthesis of mesoporous {alpha}-Fe{sub 2}O{sub 3} nanorods and visible light photocatalytic property

Graphical abstract: Porous {alpha}-Fe{sub 2}O{sub 3} nanorods were prepared by a facile hydrothermal process of Fe(NO{sub 3}){sub 3}{center_dot}9H{sub 2}O in NaOH aqueous solution combined with calcination method. The rod structure can be well controlled via NaOH quantity and exhibits a high BET surface area of 105.1 m{sup 2} g{sup -1}. The as-obtained porous {alpha}-Fe{sub 2}O{sub 3} nanorods show good reusability and superior visible-light photocatalytic activity in degradation of MB compared to hematite nanoparticles and microplates. Considering the excellent photocatalytic activity, recycling stability, and facile preparation method, the porous {alpha}-Fe{sub 2}O{sub 3} nanorods are believed to have potential application in the field of photocatalysis. Highlights: Black-Right-Pointing-Pointer Porous {alpha}-Fe{sub 2}O{sub 3} nanorods with typical pore size of 2-4 nm were controlled prepared. Black-Right-Pointing-Pointer The porous {alpha}-Fe{sub 2}O{sub 3} nanorods exhibit a high BET surface area of 105.1 m{sup 2} g{sup -1} and a pore volume of 0.13 m{sup 3} g{sup -1}. Black-Right-Pointing-Pointer It exhibits excellent visible-light photocatalytic activity and reusability in degradation of MB, in comparison to {alpha}-Fe{sub 2}O{sub 3} nanoparticles and platelets. -- Abstract: Porous {alpha}-Fe{sub 2}O{sub 3} nanorods with typical pore size of 2-4 nm were controlled prepared by a facile hydrothermal process of Fe(NO{sub 3}){sub 3}{center_dot}9H{sub 2}O aqueous solution in the presence of NaOH, followed by a calcination treatment. Contrast experiments indicate that the morphology and crystalline structure of the hydrothermal products depend greatly on the quantity of NaOH. Hematite nanoparticles and microplates were respectively obtained under conditions without or with excess NaOH. The porous {alpha}-Fe{sub 2}O{sub 3} nanorods exhibit a high BET surface area of 105.1 m{sup 2} g{sup -1} and a pore volume of 0.13 m{sup 3} g{sup -1}. UV-vis measurement shows wide absorption to visible light and an obvious blue-shift of the adsorption edge due to the quantum size effect. The visible-light photocatalytic performances of the as-prepared samples were evaluated by photocatalytic decolorization of methylene blue at ambient temperature. The results indicate that the photocatalytic activity of the porous {alpha}-Fe{sub 2}O{sub 3} nanorods is superior to hematite nanoparticles and platelets and exhibit good reusable feature. The photocatalytic process of porous structure is determined to be pseudo-first-order reaction with apparent reaction rate constant of 1.04 Multiplication-Sign 10{sup -2} min{sup -1}. And the optimum photocatalyst dosage is 20 mg per 100 mL of dye solution. The porous {alpha}-Fe{sub 2}O{sub 3} nanorods are considered potential photocatalyst for practical application due to the excellent photocatalytic behavior and good reusability.

36 MATERIALS SCIENCE↗

Unidirectional luminescence from InGaN/GaN quantum-well metasurfaces

III–nitride light-emitting diodes (LEDs) are the backbone of ubiquitous lighting and display applications. Imparting directional emission is an essential requirement for many LED implementations. Although optical packaging, nanopatterning and surface roughening4 techniques can enhance LED extraction, directing the emitted light requires bulky optical components. Optical metasurfaces provide precise control over transmitted and reflected waveforms, suggesting a new route for directing light emission. However, it is difficult to adapt metasurface concepts for incoherent light emission, due to the lack of a phase-locking incident wave. Here, we demonstrate a metasurface-based design of InGaN/GaN quantum-well structures that generate narrow, unidirectional transmission and emission lobes at arbitrary engineered angles. We further demonstrate 7-fold and 100-fold enhancements of total and air-coupled external quantum efficiencies, respectively. The results present a new strategy for exploiting metasurface functionality in light-emitting devices.

inorganic LEDs↗

Nanocomposite Materials for Accelerating Decarbonization

Here, decarbonization is demonstrated by catalytic conversion of CO 2 to fuel by means of exposure of cadmium selenide (CdSe) quantum dots-titania (TiO 2 ) nanophotocatalysts to sunlight illumination. The primary products resulted from this chemical reactions are methanol, carbon monoxide, and hydrogen after several hours of exposure to sun light. The overall CO 2 conversion efficiency of such quantum dot-titania nanostructures was compared with that of pure TiO 2 nanorod array photocatalyst. Data shows an improved conversion efficiency when composite quantum dot-titania nanostructures were used in comparison with titania nanophotocatalysts. It is postulated that this is due to the additional absorbance of visible light by the quantum dots and generation of additional charge separation at the CdSe-TiO 2 interfaces. The conversion efficiency of such an artificial photosynthesis process remains to be optimized for practical applications.

36 MATERIALS SCIENCE↗

Manipulating transmission and reflection properties of a photonic crystal doped with quantum dot nanostructures

The transmission and reflection properties of incident light in a defect dielectric structure is studied theoretically. The defect structure consists of donor and acceptor quantum dot nanostructures embedded in a photonic crystal. It is shown that the transmission and reflection properties of incident light can be controlled by adjusting the corresponding parameters of the system. The role of dipole–dipole interaction is considered as a new parameter in our calculations. It is noted that the features of transmission and reflection curves can be adjusted in the presence of dipole–dipole interaction. It is found that the absorption of weak probe light can be converted to the probe amplification in the presence of dipole–dipole interaction. Moreover, the group velocity of transmitted and reflected probe light is discussed in detail in the absence and presence of dipole–dipole interaction. Our proposed model can be used as a new all-optical devices based on photonic materials doped with nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

ORNL Demonstrates Large-Scale Technique to Produce Quantum Dots

A method to produce significant amounts of semiconducting nanoparticles for light-emitting displays, sensors, solar panels and biomedical applications has gained momentum with a demonstration by researchers at Oak Ridge National Laboratory.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Quantum noise of a Michelson-Sagnac interferometer with a translucent mechanical oscillator

Quantum fluctuations in the radiation pressure of light can excite stochastic motions of mechanical oscillators thereby realizing a linear quantum opto-mechanical coupling. When performing a precise measurement of the position of an oscillator, this coupling results in quantum radiation pressure noise. Up to now this effect has not been observed yet. Generally speaking, the strength of radiation pressure noise increases when the effective mass of the oscillator is decreased or when the power of the reflected light is increased. Recently, extremely light SiN membranes ({approx_equal}100 ng) with high mechanical Q values at room temperature ({>=}10{sup 6}) have attracted attention as low thermal noise mechanical oscillators. However, the power reflectance of these membranes is much lower than unity (<0.4 at a wavelength of 1064 nm) which makes the use of advanced interferometer recycling techniques to amplify the radiation pressure noise in a standard Michelson interferometer inefficient. Here, we propose and theoretically analyze a Michelson-Sagnac interferometer that includes the membrane as a common end mirror for the Michelson interferometer part. In this topology, both power and signal recycling can be used even if the reflectance of the membrane is much lower than unity. In particular, signal recycling is a useful tool because it does not involve a power increase at the membrane. We derive the formulas for the quantum radiation pressure noise and the shot noise of an oscillator position measurement and compare them with theoretical models of the thermal noise of a SiN membrane with a fundamental resonant frequency of 75 kHz and an effective mass of125 ng. We find that quantum radiation pressure noise should be observable with a power of 1 W at the central beam splitter of the interferometer and a membrane temperature of 1 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Room temperature spin injection into (110) GaAs quantum wells using Fe/x-AlO{sub x} contacts in the regime of current density comparable to laser oscillation

We investigate the electrical spin injection into (110) GaAs single quantum wells (SQWs) and multiple quantum wells (MQWs) using light-emitting diodes (LEDs) having Fe/crystalline-AlO{sub x} (x-AlO{sub x}) tunnel barrier contacts. A degree of circular polarization (P{sub c}) of 5.0% is obtained for the SQW LED at 4 K with the current density of 1 kA/cm{sup 2} which is comparable to that for the laser oscillation in vertical-cavity surface-emitting lasers (VCSELs). On the basis of electron spin relaxation time and carrier lifetime in the (110) GaAs SQW measured by time-dependent photoluminescence and the value of P{sub c} = 5.0%, the degree of spin polarization of initially injected electrons (P{sub 0}) in the SQW is estimated to be 6.6% at 4 K. By using the MQW LED having a much stronger electroluminescence, a P{sub c} value of 2.6% is obtained at room temperature (RT) with the current density of 1.5 kA/cm{sup 2}. The temperature and current density dependences of P{sub c} are found to be weak in both the SQW and MQW LEDs. The estimated P{sub 0} of 9.3% at RT suggests that the Fe/x-AlO{sub x} contacts can be used for the RT electrical spin injection for spin-controlled VCSELs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transverse angular momentum of photons

We develop the quantum theory of transverse angular momentum of light beams. The theory applies to paraxial and quasiparaxial photon beams in vacuum and reproduces the known results for classical beams when applied to coherent states of the field. Both the Poynting vector, alias the linear momentum, and the angular-momentum quantum operators of a light beam are calculated including contributions from first-order transverse derivatives. This permits a correct description of the energy flow in the beam and the natural emergence of both the spin and the angular momentum of the photons. We show that for collimated beams of light, orbital angular-momentum operators do not satisfy the standard commutation rules. Finally, we discuss the application of our theory to some concrete cases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Excellent red phosphors of double perovskite Ca{sub 2}LaMO{sub 6}:Eu (M=Sb, Nb, Ta) with distorted coordination environment

Double perovskite Ca{sub 2}LaSbO{sub 6}, successfully synthesized by solid state reaction method, was identified by Rietveld refinements to crystallize in the monoclinic space group P2{sub 1}/n, which is isostructural to Ca{sub 2}LaMO{sub 6} (M=Nb, Ta). Excellent red luminescence of Eu-doped Ca{sub 2}LaMO{sub 6} (M=Sb, Nb, Ta) can be obtained and no luminescence quenching effect was observed when Eu-doping level reached 40%. For Ca{sub 2}La{sub 0.6}NbO{sub 6}:0.4Eu{sup 3+}, quantum efficiencies of 20.9% and 27.7% were reached to show high light conversion and bright red emission excited at 465 nm (blue light) and 534 nm (green light), respectively, comparable to the commercial phosphors. Through systemic investigation for the series of double perovskite compounds, the excellent red emission in Ca{sub 2}LaMO{sub 6} is attributed to highly distorted polyhedra of EuO{sub 8} (low tolerance factor of the pervoskite), and large bond distances of La-O (low crystal field effect of the activator). - Graphical Abstract: Eu{sup 3+} doped double-perovskite compounds A{sub 2}LnMO{sub 6} (A=Ca, Sr, Ba; Ln=La, Gd, Y; M=Sb, Nb, Ta) show the dependence of luminescence intensity on the crystal structure. Highlights: Black-Right-Pointing-Pointer A series of double perovskite compounds were synthesized by solid state reaction. Black-Right-Pointing-Pointer Eu{sup 3+} doped samples display intense red emission when excited by blue or green light. Black-Right-Pointing-Pointer High quantum efficiency was obtained, comparable to the commercial phosphors. Black-Right-Pointing-Pointer Luminescence properties were ascribed to crystal distortion and large Ln-O distance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electroluminescence from completely horizontally oriented dye molecules

A complete horizontal molecular orientation of a linear-shaped thermally activated delayed fluorescent guest emitter 2,6-bis(4-(10Hphenoxazin-10-yl)phenyl)benzo[1,2-d:5,4-d′] bis(oxazole) (cis-BOX2) was obtained in a glassy host matrix by vapor deposition. The orientational order of cis-BOX2 depended on the combination of deposition temperature and the type of host matrix. Complete horizontal orientation was obtained when a thin film with cis-BOX2 doped in a 4,4′-bis(N-carbazolyl)-1,1′-biphenyl (CBP) host matrix was fabricated at 200 K. The ultimate orientation of guest molecules originates from not only the kinetic relaxation but also the kinetic stability of the deposited guest molecules on the film surface during film growth. Utilizing the ultimate orientation, a highly efficient organic light-emitting diode with the external quantum efficiency of 33.4 ± 2.0% was realized. The thermal stability of the horizontal orientation of cis-BOX2 was governed by the glass transition temperature (T{sub g}) of the CBP host matrix; the horizontal orientation was stable unless the film was annealed above T{sub g}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The red-emitting phosphors of Eu{sup 3+}-activated MR{sub 2}(MoO{sub 4}){sub 4} (M = Ba, Sr, Ca; R = La{sup 3+}, Gd{sup 3+}, Y{sup 3+}) for light emitting diodes

Graphical abstract: The luminescence quantum efficiencies of Eu{sup 3+}-doped MY{sub 2−x}Eu{sub x}(MoO{sub 4}){sub 4} show the dependence on the Eu{sup 3+} doping (x) for M = Ca (a), Sr (b), Ba (c). Display Omitted Highlights: ► Eu{sup 3+}-activated MY{sub 2}(MoO{sub 4}){sub 4} (M = Ba, Sr, Ca) were firstly prepared. ► Comprehensive investigations of QEs and thermal stabilities of Eu{sup 3+}-activated MR{sub 2}(MoO{sub 4}){sub 4} (M = Ba, Sr, Ca; R = La, Gd). ► BaYEu(MoO{sub 4}){sub 4}, SrY0.6Eu1.4(MoO{sub 4}){sub 4} and CaEu{sub 2}(MoO{sub 4}){sub 4} are the best choice for solid state lighting because of high QEs and thermal stabilities. -- Abstract: A series of red-emitting phosphors of MR{sub 2}(MoO{sub 4}){sub 4}:Eu{sup 3+} (M = Ba, Sr, Ca; R = La{sup 3+}, Gd{sup 3+}, Y{sup 3+}) were prepared by solid-state reaction. The photoluminescence excitation and emission spectra were investigated. The phosphors can be efficiently excited by the near UV light and exhibit a red luminescence corresponding to the electric dipole transition {sup 5}D{sub 0} → {sup 7}F{sub 2} at 615 nm. The optimum doping in MY{sub 2−x}Eu{sub x}(MoO{sub 4}){sub 4} (M = Ba, Sr, Ca) were investigated by the dependence of luminescence quantum efficiency (QE) on the Eu{sup 3+} concentrations. The absolute luminescence quantum efficiencies were measured for all the samples. The luminescence thermal satiability was checked by measuring the temperature-dependent luminescence intensities in temperature region of 10–450 K. The results indicate that the three phosphors of BaYEu(MoO{sub 4}){sub 4}, SrY{sub 0.6}Eu{sub 1.4}(MoO{sub 4}){sub 4} and CaEu{sub 2}(MoO{sub 4}){sub 4} are the best choice for white-LEDs to be used for lighting. This was evaluated in details by taking into account of the properties such as the excitation spectra, the luminescence QEs, the red color coordinates, the luminescence quenching of Eu{sup 3+}-doping concentrations and the thermal stability.

36 MATERIALS SCIENCE↗