Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process Efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

The absorption of energetic electrons by molecular hydrogen gas

The processes by which energetic electrons lose energy in a weakly ionized gas of molecular hydrogen are analyzed, and calculations are carried out taking into account the discrete nature of the excitation processes. The excitation, ionization, and heating efficiencies are computed for electrons with energies up to 100 eV absorbed in a gas with fractional ionizations up to 0.01, and the mean energy per pair of neutral hydrogen atoms is calculated.

Cravens, T. E.↗

Measurement updating using the U-D factorization

A new mechanization of the Kalman updating algorithm based on a U-D factorization of the estimate error covariance is introduced. Efficient and stable updating recursions are developed for the unit upper triangular factor U and the diagonal factor D, treating only the parameter estimation problem. Properties of the factorization update performed here include efficient one point at a time processing that requires little more computation than the optimal but numerically unstable conventional Kalman measurement update algorithm, and stability that compares with the square root filter.

Bierman, G. J.↗

Improved inverted Stepanov apparatus

Modifications in inverted Stepanov process improve heat transfer and energy efficiency in growing silicon ribbon crystals. Using system, silicon is directly heated by induction, minimizing heat transfer and contamination problems.

Berkman, S.↗

Laser-zone growth in a Ribbon-To-Ribbon (RTR) process. Silicon sheet growth development for the large area sheet task of the low-cost solar array project

A new calculation of the effects of thermal stresses during growth on silicon ribbon quality is reported. Thermal stress distributions are computed for ribbon growth under a variety of temperature profiles. A growth rate of 55 cu cm/min with a single ribbon was achieved. The growth of RTR ribbon with a fairly uniform parallel dendritic structure was demonstrated. Results with two approaches were obtained for reducing the Mo impurity level in polycrystalline feedstock. Coating the Mo substrate with Si3N4 does not effect thermal shear separation of the polyribbon; this process shows promise of improving cell efficiency and also increasing the useful life of the molybdenum substrate. A number of solar cells were fabricated on RTR silicon grown from CVD feedstock.

Baghdadi, A.↗

A model for testing centerfinding algorithms for automated optical navigation

An efficient software simulation of the imaging process for optical navigation is presented, illustrating results using simple examples. The problems of image definition and optical system modeling, including ideal image containing features and realistic models of optical filtering performed by the entire camera system, are examined. A digital signal processing technique is applied to the problem of developing methods of automated optical navigation and the subsequent mathematical formulation is presented. Specific objectives such as an analysis of the effects of camera defocusing on centerfinding of planar targets, addition of noise filtering to the algorithm, and implementation of multiple frame capability were investigated.

Griffin, M. D.↗

Silicon Research and Technology Workshop report

The materials, structures, processing, modeling and measurements of high efficiency silicon solar cells were surveyed. In the materials area, highlights included: (1) the possibility of improving cell voltages by reducing minority carrier mobilities in critical regions of the solar cells; (2) the need for and possibility of lowering the surface recombination velocity for improvement of open circuit voltage in shallow junction cells; (3) the present need for improved lifetime in high resistivity cells; and (4) the potential for new materials such as polycrystalline or dendritic web material to perform well at end of life in a radiation environment. In the area of structures, distinction was made between those for terrestrial use and those that would survive radiation environments. Areas such as epitaxial growth and laser or elctron beam annealing (and diffusion) were proposed as having certain advantages over more conventional techniques.

Meulenberg, A., Jr.↗

The HEWAC pilot line experience

Advanced silicon solar cells with both electrical contacts on the back side of the cell are described. These high efficiency wrap around contact solar cells (HEWACS) utilize a screen printed dielectric insulation layer to isolate the 'n' and 'p' contacts from each other. Development of a device exhibiting high AMO conversion efficiencies is addressed along with the processing of such cells to a point where cell fabrication can be carried out by production personnel under operating production line conditions.

Gillanders, M.↗

On the inversion of block tridiagonals without storage constraints

A strategy was developed to permit trade-offs between the number of floating point operations required and the storage requirements for the solution of certain difference problems, such as block tridiagonal systems of equations. This is done by recomputing some intermediate results instead of storing them. Reducing the storage to the square root of the current requirement roughly doubles the number of computations. Reducing the storage more than this tends to make the number of computations prohibitively large. In theory, if m is the order of each sub-matrix in the block tridiagonal matrix, one can solve any linear system with only 5m(2) + 1 temporary storage cells. In many cases m is a constant and quite small. For example, in solving a factored form of the three-dimensional Navier-Stokes equations, the size m of the block tridiagonals is 5. This method lends itself to efficient use on computers with parallel processing or vector processing architectures. On these computers the larger number of floating point operations is more than offset by the decrease in I/O and the increased percentage of vector operations made possible by this algorithm.

Merriam, M. L.↗

Color visualization for fluid flow prediction

High-resolution raster scan color graphics allow variables to be presented as a continuum, in a color-coded picture that is referenced to a geometry such as a flow field grid or a boundary surface. Software is used to map a scalar variable such as pressure or temperature, defined on a two-dimensional slice of a flow field. The geometric shape is preserved in the resulting picture, and the relative magnitude of the variable is color-coded onto the geometric shape. The primary numerical process for color coding is an efficient search along a raster scan line to locate the quadrilteral block in the grid that bounds each pixel on the line. Tension spline interpolation is performed relative to the grid for specific values of the scalar variable, which is then color coded. When all pixels for the field of view are color-defined, a picture is played back from a memory device onto a television screen.

Smith, R. E.↗

Solar-Cell Slide Rule

Slide rule relates efficiency, impurity types, impurity concentrations, and process types. Solar cell slide rule calculations are determination of allowable impurity concentration for nonredistributive process, determination of impurity buildup factor for redistributive process and determination of allowable impurity concentration for redistributive process.

Yamakawa, K. A.↗

Deflagration plasma thruster

This paper introduces the application of the magnetized plasma deflagration process to space propulsion. The deflagration process has the unique capability of efficiently converting input energy into kinetic energy in the accelerating direction. To illustrate the totally divergent characters of 'snowplow' detonation and deflagration discharges, examples of the differences between deflagration and detonation 'snowplow' discharges are expressed in terms of current densities, temperature, and particle velocities. Magnetic field profiles of the deflagration mode of discharges are measured. Typical attainable plasma characteristics are described in terms of velocity, electron temperature, and density, as well as measurement techniques. Specific impulses measured by piezo-electric probe and pendulum methods are presented. The influence of the transmission line in the discharge circuits on plasma velocity is measured by means of a microwave time-of-flight method. The results for the deflagration thruster are compared with other space thrusters. Further research areas are identified.

Cheng, D. Y.↗

The Influence of Synoptic Scales on Low-frequency Modes of Variability

Model analysis and predictablity studies using an equivalent barotropic empirical orthogonal function (EOF) model described in Schubert (1984b) are dicussed. An extensive set of 10-day forecasts was produced for the 12 component version of the model. Comparisons with observed data show apparently useful forecasts for individual winters. However, when averaged over 10 winters, the improvement over persistence was marginal and only one of the EOF's (resembling North Atlantic blocking) showed a statistically significant improvement. These results suggest the need for a more realistic model which includes shorter time scale baroclinic processes and spatial modes capable of efficiently representing the characteristic structures associated with baroclinic instability.

Schubert, S. D.↗

On the factorization of block-tridiagonals without storage constraints

In many programs solving difference equations, problem size is restricted by the number of available memory cells. A strategy has been developed to permit trade-offs between the number of floating point operations required and storage requirements for the solution of certain problems such as block tridiagonal systems of equations. This is done by recomputing some intermediate results instead of storing them. Reducing the storage to the square root of the current requirement will roughly double the number of computations. In theory, if m is the order of each sub-matrix in the block tridiagonal matrix, one can solve any linear system with only 5 sq m + 1 temporary storage cells. This method lends itself to efficient use on computers with parallel processing or vector processing architectures. On these computers the larger number of floating point operations is more than offset by the decrease in I/O and the increased percentage of vector operations made possible by this algorithm.

Merriam, M. L.↗

Distributed parameter modeling of the structural dynamics of the Solar Array Flight Experiment

A distributed-parameter model of the structural dynamics of the space-shuttle-deployed Solar Array Flight Experiment is developed and used to produce estimates of the modal frequencies and mode shapes. A lumped parameter version of the distributed model is used to estimate model characteristics by analyzing the measured responses of 32 targets. To make the modeling more tenable, a distributed parameter system is used to reduce the number of unknown parameters, a modified Newton-Raphson technique is used for rapid convergence, and a parallel processing supercomputer is used for more efficient computation. The performances of computers with a high-speed serial processor and with a high-speed parallel processor are compared. The best results are obtained with the modeling approach in which maximum likelihood estimation is applied to distributed parameter models.

Taylor, L. W., Jr.↗

Volcanic control of the Io atmosphere and neutral and plasma torus

Rate equations for the column density of Io's atmosphere and the number density of neutral atoms and ions in the torus have been formulated in terms of surface sublimation and venting of volcanic gases, sputtering efficiency, thermal escape, and the plasma processes that take place in the torus which included electron impact ionization, charge exchange, and transport. In the limit of low volcanic activity, estimates of the densities can be obtained, and the baseline configuration that would exist in the absence of volcanic activity is found. Solution of the coupled steady state rate equations shows that the densities are sensitive, to a varying degree, to the level of Io volcanism. The steady state densities predicted by the model are consistent with a volcanic flux of no more than 10 to the 12th/sq cm per sec. This is significantly lower than the values obtained on the basis of resurfacing rates and appears to imply that surface lava flows play a major role in the resurfacing process.

Eviatar, Aharon↗

Photochemistry of the atmosphere of Uranus

A detailed one-dimensional photochemical model incorporating vertical transport by eddy and molecular diffusion is used to study the importance of chemical and physical processes that control the hydrocarbon abundances in the stratosphere of Uranus. The study includes updated photochemical reaction rates and photolysis branching ratios; explicit calculation of the condensation rate of condensing species; and appropriate boundary conditions at the tropopause. It is found that the basic photochemical process generally produces low net conversion efficiencies of methane to higher hydrocarbons. However, even with these low efficiencies, the total condensation rate, which represents the net rate of conversion of methane to hydrocarbons, is roughly 2 x 10 to the -16th g/cm sec, in agreement with the upper range of the low condensation rate for the production of the stratospheric aerosol layer as determined by Pollack et al. (1987). Furthermore, a range of vertical transport rates is required to separately match the observational constraints on hydrocarbon abundances. The solar reflection data refer to the sunlit polar region of Uranus and require an eddy diffusion coefficient of K approx. = 50 sq cm/sec for globally averaged insolation or K approx = 1500 (Nh/N) exp 1/2 for overhead sun. The Voyager 2 Utraviolet Spectrometer solar occultation data refer to the equatorial regions, thus implying a large latitudinal gradient in stratospheric hydrocarbon abundance.

Summers, Michael E.↗

Chemical vapor deposition modeling: An assessment of current status

The shortcomings of earlier approaches that assumed thermochemical equilibrium and used chemical vapor deposition (CVD) phase diagrams are pointed out. Significant advancements in predictive capabilities due to recent computational developments, especially those for deposition rates controlled by gas phase mass transport, are demonstrated. The importance of using the proper boundary conditions is stressed, and the availability and reliability of gas phase and surface chemical kinetic information are emphasized as the most limiting factors. Future directions for CVD are proposed on the basis of current needs for efficient and effective progress in CVD process design and optimization.

Gokoglu, Suleyman A.↗

PAHs molecules and heating of the interstellar gas

Until now it has remained difficult to account for the rather high temperatures seen in many diffuse interstellar clouds. Various heating mechanisms have been considered: photoionization of minor species, ionization of H by cosmic rays, and photoelectric effect on small grains. Yet all these processes are either too weak or efficient under too restricting conditions to balance the observed cooling rates. A major heat source is thus still missing in the thermal balance of the diffuse gas. Using photoionization cross sections measured in the lab, it was shown that in order to balance the observed cooling rates in cold diffuse clouds (T approx. 80 K) the PAHs would have to contain 15 percent of the cosmic abundance of carbon. This value does not contradict the former estimation of 6 percent deduced from the IR emission bands since this latter is to be taken as a lower limit. Further, it was estimated that the contribution to the heating rate due to PAH's in a warm HI cloud, assuming the same PAH abundance as for a cold HI cloud, would represent a significant fraction of the value required to keep the medium in thermal balance. Thus, photoionization of PAHs might well be a major heat source for the cold and warm HI media.

Verstraete, Laurent↗