Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Precipitation Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

A high-performance β-solidifying TiAl alloy sheet: Multi-type lamellar microstructure and phase transformation

Highlights: • A high-performance β-solidifying TiAl alloy sheet is fabricated via hot rolling. • Fine multi-type β/γ and α{sub 2}/γ lamellar structures are formed during hot-rolling. • These lamellar structures are induced by the β → γ and α + γ → α{sub 2} + γ/γ{sub T} transformations. • The nano-scaled antiphase domain is induced by α → α{sub 2} disorder-order transformation. • The fine multi-type lamellar structures contribute to the strength enhancement. - Abstract: TiAl alloys are widely used in the aerospace industry and, hence, a thorough understanding of the corresponding microstructural evolution is crucial for providing insight into the fabrication of high-performance TiAl alloy sheets. In this study, a high-performance β-solidifying Ti-43Al-9V-0.2Y alloy sheet with multi-type lamellar structures was obtained via hot-rolling at an initial rolling temperature of 1260 °C. Owing to the temperature drop and reheat associated with multi-pass rolling, relatively fine irregular β/γ and regular α{sub 2}/γ lamellar microstructures (average size: ~25 μm) with nano-scaled antiphase domains (APDs) were generated by the β → γ and α + γ → α{sub 2} + γ/γ{sub T} phase transformations. These two lamellar structures have different formation mechanisms. The results of electron backscatter diffraction and transmission electron microscopy revealed that the nucleation and growth of (i) β/γ and (ii) α{sub 2}/γ lamellar structures are induced mainly by (i) stress and (ii) a combination of the stress and temperature drop during hot-rolling, respectively. Thin γ{sub T} precipitates from the α/α{sub 2} or γ phases. This precipitation is induced by the higher stress and lower temperature associated with the later stage (compared with those occurring in the initial stages) of hot-rolling. Moreover, compared with the corresponding as-forged alloy, the as-rolled TiAl alloy sheet exhibits better performance at both room and elevated temperatures. The improvement in the tensile properties is attributed to the duplex microstructure consisting of fine multi-type lamellar structures with nano-scaled APDs. The interface boundaries of β/γ, α{sub 2}/γ and APDs, which are effective in retarding dislocation motion, contribute mainly to strengthening of the alloy sheet.

36 MATERIALS SCIENCE↗
DOE OSTI2020

SPRUCE Precipitation Chemistry and Bulk Atmospheric Deposition Beginning in 2013

This data set reports the chemistry of precipitation water that was collected at the SPRUCE site located in the S1 bog and calculated values of bulk atmospheric deposition of solutes in precipitation. Sample collection and analyses started during December of 2013 and will continue for the duration of the experiment. Precipitation samples were collected year round on an event-basis from up to three individual collectors. Samples were either composited or individually analyzed, depending on the total volume of water available relative to the amount needed to complete all laboratory analyses. Funnel/bottle collectors were used to collect rainfall and buckets were used to collect snowfall and mixed precipitation. Samples were analyzed for pH, specific conductivity, nutrient concentrations (ammonium, nitrate, soluble reactive phosphorus, total nitrogen), cation concentrations (calcium, magnesium), anion concentrations (chloride, sulfate), total organic carbon concentrations, and natural-abundance stable isotopes of water (δ18O-H2O and δD-H2O). Bulk deposition was calculated by multiplying rainfall amount by solute concentration for ammonium, nitrate, soluble reactive phosphorus (SRP), total nitrogen, calcium, magnesium, chloride, sulfate, and total organic carbon. All measurements were made at the 8.1-ha S1 bog forest site in northern Minnesota, 40 km north of Grand Rapids, in the USDA Forest Service Marcell Experimental Forest (MEF).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2012

2011 Raditation & Climate Gordon Research Conference (July 10-15 2011- Colby College, Waterville, Maine)

The 2011 Gordon Research Conference on Radiation and Climate will present cutting-edge research on outstanding issues in climate change, particularly those in which the interactions between clouds, aerosols, and precipitation play a major role. The Conference will feature a broad range of topics, including grand challenges in atmospheric radiation and climate, cloud and water vapor feedbacks, aerosol-cloud-precipitation-climate interactions across scales, new approaches for remote sensing and in-situ observations of clouds, aerosols and precipitation, and multi-scale modeling challenges. The invited speakers will present the most important recent advances and future challenges in these areas. The Conference will bring together a collection of leading investigators who are at the forefront of their field, and will provide opportunities for scientists, especially junior scientists and graduate students, to present their work in poster format and exchange ideas with leaders in the field. The collegial atmosphere of this Conference, with programmed discussion sessions as well as opportunities for informal gatherings in the afternoons and evenings, provides an avenue for scientists from different disciplines to brainstorm and promotes cross-disciplinary collaborations in the various research areas represented.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Multiscale investigations of nanoprecipitate nucleation, growth, and coarsening in annealed low-Cr oxide dispersion strengthened FeCrAl powder

A major challenge in the design of oxide dispersion strengthened (ODS) FeCrAl alloys is the optimization of the fine-scale particle size distribution that provides both beneficial mechanical properties and irradiation resistance. To address this obstacle, the nucleation, growth, and coarsening of the fine-scale (Y,Al,O) nanoprecipitates within an ODS FeCrAl powder was studied using atom probe tomography (APT) and small-angle neutron scattering (SANS). Mechanically alloyed Fe10Cr-6.1Al-0.3Zr + Y 2 O 3 wt.% (CrAZY) powders were heated in-situ from 20 to 1000 °C to capture the nucleation and growth of the nanoprecipitates using SANS. Furthermore, CrAZY powders were annealed at 1000 °C, 1050 °C, and 1100 °C for ageing times from 15 min to 500 h followed by either APT or magnetic SANS to study the structure, composition, and coarsening kinetics of the nanoprecipitates at high temperature. In-situ SANS results indicate nanoprecipitate nucleation and growth at low temperatures (200–600 °C). APT results revealed compositions corresponding to the cubic Y 3 Al 5 O 12 garnet (YAG) stoichiometry with a possible transition towards the perovskite YAlO3 (YAP) phase for larger precipitates after sufficient thermal ageing. However, magnetic SANS results suggest a defective structure for the nanoprecipitates indicated by deviations of the calculated A-ratio from stoichiometric (Y,Al,O) phases. Particle coarsening kinetics follow n = 6 power law kinetics with respect to particle size, but the mechanism cannot be explained through the dislocation pipe diffusion mechanism. In conclusion, the potential effect of precipitate coarsening during pre- and post-consolidation heat treatments on the irradiation resistance of ODS FeCrAl alloys is discussed with respect to sink strength maximization.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The NEON Daily Isotopic Composition of Environmental Exchanges Dataset

The National Ecological Observatory Network (NEON) provides open-access measurements of stable isotope ratios in atmospheric water vapor (δ 2 H, δ 18 O) and carbon dioxide (δ 13 C) at different tower heights, as well as aggregated biweekly precipitation samples (δ 2 H, δ 18 O) across the United States. These measurements were used to create the NEON Daily Isotopic Composition of Environmental Exchanges (NEON-DICEE) dataset estimating precipitation (P; δ 2 H, δ 18 O), evapotranspiration (ET; δ 2 H, δ 18 O), and net ecosystem exchange (NEE; δ 13 C) isotope ratios. Statistically downscaled precipitation datasets were generated to be consistent with the estimated covariance between isotope ratios and precipitation amounts at daily time scales. Isotope ratios in ET and NEE fluxes were estimated using a mixing-model approach with calibrated NEON tower measurements. NEON-DICEE is publicly available on HydroShare and can be reproduced or modified to fit user specific applications or include additional NEON data records as they become available. The NEON-DICEE dataset can facilitate understanding of terrestrial ecosystem processes through their incorporation into environmental investigations that require daily δ 2 H, δ 18 O, and δ 13 C flux data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Subdiurnal Stratocumulus Cloud Fraction Variability and Sensitivity to Precipitation

This paper presents an analysis of subtropical marine stratocumulus cloud fraction variability using a 30-min and 3° × 3° cloud fraction dataset from 2003 to 2010. Each of the three subtropical marine stratocumulus regions has distinct diurnal characteristics, but the southeast (SE) Pacific and SE Atlantic are more similar to each other than to the northeast (NE) Pacific. Here, the amplitude and season-to-season diurnal cycle variations are larger in the Southern Hemisphere regions than in the NE Pacific. Net overnight changes in cloud fraction on 3° × 3° scales are either positive or neutral >77% of the time in the NE Pacific and >88% of the time in the SE Pacific and SE Atlantic. Cloud fraction often increases to 100% by dawn when cloud fraction at dusk is >30%. In the SE Pacific and SE Atlantic, a typical decrease in cloud area (median ≤ –5.7 × 10 5 km 2 ) during the day is equivalent to 25% or more of the annual-mean cloud deck area. Time series for 3° × 3° areas where cloud fraction was ≥90% sometime overnight and <60% at dawn, such as would result from nocturnal formation of pockets of open cells (POCs), only occur 1.5%, 1.6%, and 3.3% of the time in the SE Pacific, SE Atlantic, and NE Pacific, respectively. Comparison of cloud fraction changes to ship-based radar and satellite-derived precipitation intensity and area measurements shows a lack of sensitivity of cloud fraction to drizzle on time scales of 1–3 h and spatial scales of 100–300 km.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Catastrophic oxidation mechanism of hyper duplex stainless steel S32707 at high temperature in air

Highlights: • High temperature oxidation behavior and mechanism of S32707 were investigated in air. • MoO{sub 3}, molten molybdate and precipitate jointly cause catastrophic oxidation at 900 °C. • Air-nitriding plays an important role in accelerating oxidation at 1000 and 1100 °C. • Synergism of MoO{sub 3}, molten molybdate and nitriding promotes catastrophic oxidation. • Disappearance of MoO{sub 3}, molybdate and nitriding enhances oxidation resistance at 1200 °C. - Abstract: High-temperature oxidation behavior and the mechanism of hyper duplex stainless steel S32707 were investigated at 900, 1000, 1100 and 1200 °C in air. Some interesting oxidation characteristics were observed, and the corresponding oxidation mechanisms were proposed. At 900 °C, oxidation follows a linear rate law. The combined actions of MoO{sub 3} volatilization, molten molybdate dissolution reaction and block-like σ phase and Cr{sub 2}N precipitation cause catastrophic oxidation. When the temperature is raised to 1000 and 1100 °C, the deleterious effects of MoO{sub 3} and molten molybdates are greatly enhanced. Moreover, undesirable air-nitriding occurs and further accelerates the oxidation. The synergistic effects of MoO{sub 3} volatilization, molten molybdate dissolution reaction and air-nitriding strongly promote catastrophic oxidation. Surprisingly, the oxidation at 1200 °C follows a near-parabolic rate law. The disappearances of MoO{sub 3}, molten molybdates and air-nitriding lead to the formation of a rather compact, complete and protective oxide layer. The oxidation resistance of the steel has been clearly improved.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Effect of thermally stable Cu- and Mg-rich aluminides on the high temperature strength of an AlSi12CuMgNi alloy

The internal architecture of an AlSi12CuMgNi piston alloy, revealed by synchrotron tomography, consists of three dimensional interconnected hybrid networks of Cu-rich aluminides, Mg-rich aluminides and eutectic/primary Si embedded in an α-Al matrix. The strength at room temperature and at 300°C is studied as a function of solution treatment time at 490°C and compared with results previously reported for an AlSi12Ni alloy. The addition of 1 wt% Cu and 1 wt% Mg to AlSi12CuMgNi increases the room temperature strength by precipitation hardening while the strength at 300°C is similar for both alloys in as-cast condition. The strength of AlSi12CuMgNi decreases with solution treatment time and stabilizes at 4 h solution treatment. The effect of solution treatment time on the strength of the AlSi12CuMgNi alloy is less pronounced than for the AlSi12Ni alloy both at room temperature and at 300°C. - Highlights: • The 3D microstructure of AlSi12CuMgNi is revealed by synchrotron tomography. • An imaging analysis procedure to segment phases with similar contrasts is presented. • 1 wt% Cu and Mg results in the formation of 3D networks of rigid phases. • AlSi12CuMgNi is stronger than AlSi12Ni owing to the stability of the 3D networks.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Annual Storm Water Report for the Y-12 National Security Complex, Oak Ridge, Tennessee

The storm water pollution prevention program at the Y-12 National Security Complex (Y-12 Complex) intends to protect the quality of storm water runoff through: (1) reducing the exposure of metal accumulation areas to precipitation, (2) implementation of Best Management Practices, (3) sampling during rain events and subsequent analysis, and (4) routine surveillances. When prescribed, the analytical data is compared to a set of cut-off concentration values to determine how the Y-12 Complex relates to other metal fabrication industries in the state of Tennessee. The quality of the storm water exiting the Y-12 Complex via East Fork Poplar Creek indicated some improvement in 2011. This improvement is attributable to the completion of several construction, demolition and remediation projects which occurred in 2010 and 2011. Emphasis will continue to be placed on site inspections and the timely implementation of improved storm water control measures as deemed necessary.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2014

Determination of filter pore size for use in HB line phase II production of plutonium oxide

H-Canyon and HB-Line are tasked with the production of plutonium oxide (PuO 2 ) from a feed of plutonium (Pu) metal. The PuO 2 will provide feed material for the Mixed Oxide (MOX) Fuel Fabrication Facility. After dissolution of the Pu metal in H-Canyon, plans are to transfer the solution to HB-Line for purification by anion exchange. Anion exchange will be followed by plutonium(IV) oxalate precipitation, filtration, and calcination to form PuO 2 . The filtrate solutions, remaining after precipitation, contain low levels of Pu ions, oxalate ions, and may include solids. These solutions are transferred to H-Canyon for disposition. To mitigate the criticality concern of Pu solids in a Canyon tank, past processes have used oxalate destruction or have pre-filled the Canyon tank with a neutron poison. The installation of a filter on the process lines from the HB-Line filtrate tanks to H-Canyon Tank 9.6 is proposed to remove plutonium oxalate solids. This report describes SRNL’s efforts to determine the appropriate pore size for the filters needed to perform this function. Information provided in this report aids in developing the control strategies for solids in the process.

36 MATERIALS SCIENCE↗
DOE OSTI2011

Lattice variations of Ti-6Al-4V alloy with hydrogen content

Effect of hydrogen content on the lattice parameter of Ti-6Al-4V alloy has been investigated by X-ray diffraction. The experimental results show that the solution of hydrogen in the Ti-6Al-4V alloy affects significantly on the lattice parameters of {alpha}, {beta} and {delta} phases, especially the {beta} phase. Furthermore, the critical hydrogen content of {delta} hydride formation for Ti-6Al-4V alloy is 0.385 wt.%. When the hydrogen content is lower than the critical hydrogen content, the {delta} hydride cannot precipitate and the lattice parameter ({alpha}) of {beta} phase linearly increases with the increasing of hydrogen content. When the hydrogen content is higher than the critical hydrogen content, the {delta} hydride precipitates and the lattice parameter ({alpha}) of {beta} phase varies inconspicuously with hydrogen content. In addition, the effects of lattice variations and {delta} hydride formation on microstructure are discussed. The {alpha}/{beta} interfaces of lamellar transformed {beta} phase become fuzzy with the increasing of hydrogen content because of the lattice expansion of {beta} phase. Compared with that of the Ti-6Al-4V alloy at low hydrogen content ({<=} 0.385 wt.%), the contrasts of primary {alpha} phase and transformed {beta} phase of Ti-6Al-4V alloy at high hydrogen content ({>=} 0.385 wt.%) were completely reversed due to the formation of {delta} hydride. - Research Highlights: {yields} A novel method for determining {delta} hydride in Ti-6Al-4V alloy is presented. {yields} The critical hydrogen content of {delta} hydride formation is 0.385 wt.%. {yields} The lattice parameter of {beta} phase can be expressed as follows: a=0.323(1+9.9x10{sup -2}C{sub H}) . {yields} Precipitation of {delta} hydride has a significant influence on the microstructure. {yields} The {alpha}/{beta} interfaces of transformed {beta} phase became fuzzy in the hydrogenated alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Effect of trace amounts of added Sc on microstructure and mechanical properties of 2055 aluminum alloy

Highlights: • Effect of trace Sc on microstructure and mechanical properties in 2055 Al-alloy was investigated. • T{sub 1} is the main strengthening phase in Sc free and Sc added 2055 alloy at the aging temperature of 175°C and 200°C. • The refinement of T{sub 1} by Sc addition depends on the aging temperature. • Mechanical properties were deteriorated by Sc at the aging temperature of 175°C and improved at 200°C aging treatment. - Abstract: The effects of Sc additions and isothermal aging on the microstructure and mechanical properties of 2055 aluminum alloy have been investigated. The isothermal aging temperatures investigated were 175 °C and 200 °C. Results show that the aging temperature does not affect the type of precipitates in both Sc-free and Sc-added 2055 Al alloys. While remarkable changes in the size and number density of T{sub 1} (Al{sub 2}CuLi) precipitates have been observed. For samples aged at 175 °C for 8 h, the average length of T{sub 1} precipitates was increased from 39.9 nm to 45.6 nm, the number density decreased from 5.77 × 10{sup 22} m{sup −3} to 3.68 × 10{sup 22} m{sup −3} after Sc addition. On the contrary, when samples were aged at 200 °C for 8 h, the length decreased from 59.89 nm to 43.32 nm and number density increased from 2.13 × 10{sup 22} m{sup −3} to 3.00 × 10{sup 22} m{sup −3} by adding trace Sc. Slight deterioration of tensile strength and yield strength with higher ductility was founded at the aging temperature of 175 °C for 8 h due to the larger size and lower number density of T{sub 1} precipitates along with the formation of a W (AlCuSc) phase during the casting or homogenization processes. When aging temperature increased to 200 °C, tensile strength and yield strength were significantly improved by Sc addition without losing ductility. Highly dense fine T{sub 1} precipitates take responsible for the strength improvement, and to some extent it compensated the strength loss caused by the formation of W phase. A “vacancy-prison” mechanism was adopted to explain the effect of Sc additions on the precipitation of T{sub 1} phase as a function of aging temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Using Self-Organizing Maps to Identify Coherent CONUS Precipitation Regions

Extreme precipitation events have major societal impacts. These events are rare and can have small spatial scale, making statistical analysis difficult; both factors are mitigated by combining events over a region. A methodology is presented to objectively define “coherent” regions wherein data points have matching annual cycles. Regions are found by training self-organizing maps (SOMs) on the annual cycle of precipitation for each grid point across the contiguous United States (CONUS). Using the annual cycle for our intended application minimizes problems caused by consecutive dry periods and localized extreme events. Multiple criteria are applied to identify useful numbers of regions for our future application. Criteria assess these properties for each region: having many more events than experienced by a single grid point, good connectedness and compactness, and robustness to changing the number of regions. Our methodology is applicable across datasets and is tested here on both reanalysis and gridded observational data. Precipitation regions obtained align with large-scale geographical features and are readily interpretable. Useful numbers of regions balance two conflicting preferences: larger regions contain more events and thereby have more robust statistics, but more compact regions allow weather patterns associated with extreme events to be aggregated with confidence. For 6-h precipitation, 12–15 regions over the CONUS optimize our metrics. The regions obtained are compared against two existing region archetypes. For example, a popular set of regions, based on nine groups of states, has less coherent regions than defining the same number of regions with our SOM methodology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2012

Controllable synthesis of Ce{sub 1-x}Zr{sub x}O{sub 2} hollow nanospheres via supercritical anti-solvent precipitation

Nanocrystalline Ce{sub 1-x}Zr{sub x}O{sub 2} hollow nanospheres were successfully synthesized via supercritical anti-solvent precipitation using supercritical CO{sub 2} as the anti-solvent. It was found that the as-produced samples exhibited hollow spherical structures with uniform diameters ranging from 30 to 50 nm and the sphere walls were composed of various oriented nanocrystallites, with sizes of 3-7 nm. The results of high-resolution transmission electron microscopy showed that the formation of the hollow structures could be controlled by adjusting the solution concentration. The results of temperature-programmed reduction and oxygen storage capacity measurements showed that the hollow nanospheres had enhanced redox properties. A possible mechanism for the formation of Ce{sub 1-x}Zr{sub x}O{sub 2} hollow nanospheres has also been proposed and experimental investigated.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of Sn microalloying on the nucleation of L1 2 Al 3 Zr precipitates in a dilute aluminum-zirconium alloy

While L1 2 -Al 3 Zr nanoprecipitates provide a balance between strengthening and good electrical conductivity, the precipitation of L1 2 -Al 3 Zr in aluminum requires aggressive heat treatments. An improved age-hardening response was observed during isochronal aging of an Al-0.24Zr (wt%) alloy when microalloyed with Sn. A new mechanism termed Low melting point Element-Assisted Nucleation (LEAN) is proposed to explain the lower temperature nucleation of L1 2 -Al 3 Zr precipitates observed in this alloy based on the addition of a low melting point element, such as Sn. Characterization verified the first-principles density functional theory prediction that Zr and Sn atoms cluster during homogenization owing to the favorable binding energy of Zr-Sn-vacancy triplets. Direct microstructural observations revealed these clusters form Sn nanoprecipitates that assist the nucleation of L1 2 -Al 3 Zr at 200°C, where L1 2 -Al 3 Zr precipitation is not expected due to the low diffusivity of Zr atoms in Al. At higher temperatures (≳350°C), the acceleration of L1 2 -Al 3 Zr precipitation is driven by faster Zr diffusion in Al with Sn microalloying and the nuclei formed via the LEAN mechanism. In conclusion, this combination of mechanisms explains the improvement in age hardening through L1 2 -Al 3 Zr precipitation with Sn microalloying.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Evolution of the role of molybdenum in duplex stainless steels during thermal aging: From enhancing spinodal decomposition to forming heterogeneous precipitates

Thermal aging of ferrite in duplex stainless steels leads to a complex microstructural evolution that can give way to large deleterious changes in mechanical properties. The microstructural evolution mechanisms that happen concurrently are strongly linked to minor changes in composition. By characterizing duplex stainless steels with various compositions over a range of aging conditions, it was revealed that adding a modest amount of Mo to cast austenitic stainless steel (such as changing from grade CF3 to grade CF3M) not only increases the kinetics of spinodal decomposition and Ni-Si-Mn-rich G-phase precipitation, but it also forms a separate Mo-rich phase. At shorter equivalent aging times, Mo segregates from Fe and towards Cr accelerating spinodal decomposition. At longer aging times, Mo enriches in the Ni-Si-Mn clusters before phase separating into an adjoined Mo-rich cluster. We found that these phase changes and precipitation events result in a rather steep drop in fracture and impact toughness. These results will inform the design of similar alloys for use at high temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Comparative quantification and statistical analysis of η′ and η precipitates in aluminum alloy AA7075-T651 by TEM and AFM

Quantification of nanometric precipitates in metallic alloys has been traditionally performed using transmission electron microscopy, which is nominally a low throughput technique. This work presents a comparative study of quantification of η′ and η precipitates in aluminum alloy AA7075-T651 using transmission electron microscopy (TEM) and non-contact atomic force microscopy (AFM). AFM quantification was compared with 2-D stereological results reported elsewhere. Also, a method was developed, using specialized software, to characterize nanometric size precipitates observed in dark-field TEM micrographs. Statistical analysis of the quantification results from both measurement techniques supports the use of AFM for precipitate characterization. Once the precipitate stoichiometry has been determined by appropriate analytical techniques like TEM, as it is the case for η′ and η in AA7075-T651, the relative ease with which specimens are prepared for AFM analysis could be advantageous in product and process development, and quality control, where a large number of samples are expected for analysis on a regular basis. - Highlights: • Nanometric MgZn{sub 2} precipitates in AA7075-T651 were characterized using AFM and TEM. • Phase-contrast AFM was used to differentiate metal matrix from MgZn{sub 2} precipitates. • TEM and AFM micrographs were analyzed using commercially available software. • AFM image analysis and TEM 2-D stereology render statistically equivalent results.

36 MATERIALS SCIENCE↗
DOE OSTI2018

An Integrated Study on the Evolution of Inclusions in EH36 Shipbuilding Steel with Mg Addition: From Casting to Welding

Inclusion evolution behaviors, in terms of composition, size, and number density, and associated influence on the microstructures of the as-cast slabs, rolled plates, and simulated welded samples of plain EH36 and EH36-Mg shipbuilding steels have been systematically investigated. The results indicate that the inclusions in the as-cast plain EH36 are almost Al-Ca-S-O-(Mn) complex oxides with sizes ranging from 1.0 to 2.0 μm. After Mg addition, a large amount of individually fine MnS precipitates and Mg-containing Ti-Al-Mg-O-(Mn-S) complex inclusions are generated, which significantly refine the microstructure and are conducive to the nucleation of acicular ferrite in the rolled and welded sample. Moreover, after rolling and welding thermal simulation, the number of individual MnS decreases gradually due to its precipitation on the surface of Ti-Al-Mg-O oxides.

36 MATERIALS SCIENCE↗