SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A method to find the Excited-States Quantum Phase Transitions (ESQPT's) from paritysymmetry in the Dicke model is studied and presented. This method allows us to stablish a critical energy where ESQPT's take places, and divides the whole energy spectrum in two regions with different properties.
Abstract Sorption-enhanced steam reforming (SESR) of toluene (SESRT) using catalytic CO 2 sorbents is a promising route to convert the aromatic tar byproducts formed in lignocellulosic biomass gasification into hydrogen (H 2 ) or H 2 -rich syngas. Commonly used sorbents such as CaO are effective in capturing CO 2 initially but are prone to lose their sorption capacity over repeated cycles due to sintering at high temperatures. Herein, we present a demonstration of SESRT using A- and B-site doped Sr 1− x A’ x Fe 1− y B’ y O 3− δ (A’ = Ba, Ca; B’ = Co) perovskites in a chemical looping scheme. We found that surface impregnation of 5–10 mol% Ni on the perovskite was effective in improving toluene conversion. However, upon cycling, the impregnated Ni tends to migrate into the bulk and lose activity. This prompted the adoption of a dual bed configuration using a pre-bed of NiO/ γ –Al 2 O 3 catalyst upstream of the sorbent. A comparison is made between isothermal operation and a more traditional temperature-swing mode, where for the latter, an average sorption capacity of ∼38% was witnessed over five SESR cycles with H 2 -rich product syngas evidenced by a ratio of H 2 : CO x > 4.0. XRD analysis of fresh and cycled samples of Sr 0.25 Ba 0.75 Fe 0.375 Co 0.625 O 3- δ reveal that this material is an effective phase transition sorbent—capable of cyclically capturing and releasing CO 2 without irreversible phase changes occurring.
The state-of-the-art pattern recognition method in machine learning (deep convolution neural network) is used to identify the equation of state (EoS) employed in the relativistic hydrodynamic simulations of heavy ion collisions. High-level correlations of particle spectra in transverse momentum and azimuthal angle learned by the network act as an effective EoS-meter in deciphering the nature of the phase transition in QCD. The EoS-meter is model independent and insensitive to other simulation inputs including the initial conditions and shear viscosity for hydrodynamic simulations. Through this study we demonstrate that there is a traceable encoder of the dynamical information from the phase structure that survives the evolution and exists in the final snapshot of heavy ion collisions and one can exclusively and effectively decode these information from the highly complex final output with machine learning when traditional methods fail. Besides the deep neural network, the performance of traditional machine learning classifiers are also provided.
Calculations of critical temperature T{sub c} of the phase transition to superconducting state of a superconductor/ ferromagnet/superconductor (SFS) hybrid structure with proximity effect is performed on the base of linearized Usadel equations. It is shown that the proximity effect between S and F metals and the exchange interaction can induce an inhomogeneous superconducting state with longitudinal to layers Δ {sub ∝} exp(ipz) modulation of the superconductivity order parameter, which is characterized by nonzero value of the wave number p, describing the Larkin–Ovchinnikov–Fulde–Ferrell instability. Influence of this instability on transitions between 0- and π-states of the SFS structure is studied. It is shown that the 0–π transition is accompanied by a nonmonotonic dependence of both the critical temperature T{sub c} and the effective penetration depth Λ of the magnetic field into the hybrid structure on the characteristic size of the ferromagnetic region.
Vanadium dioxide (VO{sub 2}) is a correlated electron material which undergoes an insulator-metal transition proximal to room temperature. The large change of optical properties across this phase transition is promising for tunable optical and optoelectronic devices especially at infrared frequencies. We demonstrate the ability to locally tune the optical properties on the micron scale through a simple design consisting of two electrodes patterned on a VO{sub 2} thin film. By current injection between the electrodes, a localized conducting path (metallic phase) can be formed within the insulating background. The width of the conducting path can be controlled by varying the applied current. Fourier transform infrared imaging shows that this current-modulated reflectance changes significantly over a distance on the order of the wavelength in the mid-infrared spectral range.
In the present study, zinc sulfide (ZnS) and calcium lanthanum sulfide (CaLa 2 S 4 , CLS) composite ceramics were consolidated via field-assisted sintering of 0.5ZnS-0.5CLS (volume ratio) composite powders at 800–1050 °C. Through sintering curve analyses and microstructural observations, it was determined that between 800 and 1000 °C, grain boundary diffusion was the main mechanism controlling grain growth for both the ZnS and CLS phases within the composite ceramics. The consolidated composite ceramics were determined to be composed of sphalerite ZnS, wurtzite ZnS and thorium phosphate CLS. The sphalerite-wurtzite phase transition of ZnS was further demonstrated to be accompanied by the formation of stacking faults and twins in the ceramics. Furthermore, it was also found that the addition of the CLS phase improved the indentation hardness of the ceramics relative to pure ZnS by homogeneous dispersion of ZnS and CLS small grains.
Using molecular dynamics simulations we analyze the dynamics of two atomic liquids that display a liquid-liquid phase transition (LLPT): Si described by the Stillinger-Weber potential and Ga as modeled by the modified embedded-atom model. In particular, our objective is to investigate the extent to which the presence of a dip in the self-intermediate scattering function is a manifestation of an excess of vibrational states at low frequencies and may be associated with a fragile-to-strong transition (FTST) across the LLPT, as suggested recently. Our results suggest a somewhat different picture. First, in the case of Ga we observe the appearance of an excess of vibrational states at low frequencies, even in the absence of the appearance of a dip in the self-intermediate scattering function across the LLPT. Second, studying the behavior of the shear viscosities traversing the LLPTs we find that both substances are fragile in character above and below their respective LLPT temperatures. Instead of a FTST in an absolute sense these findings are more in line with a view in which the LLPTs are accompanied by a transition from a more fragile to a less fragile liquid. Furthermore, we do not find this transition to correlate with the presence of a dip in the intermediate scattering function.
A simple physical model of the metal-dielectric (vapor-liquid) phase transition in hypothetical (without molecules) atomic hydrogen is proposed. The reason for such a transition is the quantum collective cohesive energy occurring due to quantum electron-electron exchange similar to the cohesive energy in the liquid-metal phase of alkali metals. It is found that the critical parameters of the transition are P{sub c} ∼ 41000 atm, ρ{sub c} ∼ 0.1 g/cm{sup 3}, and T{sub c} ∼ 9750 K.
The structural and magnetic properties of a glaserite-type Na 2 BaFe(VO 4 ) 2 compound, featuring a triangular magnetic lattice of Fe 2+ (S = 2), are reported. Temperature dependent X-ray single crystal studies indicate that at room temperature the system adopts a trigonal P$\bar{3}$ m 1 structure and undergoes a structural phase transition to a C2/c monoclinic phase slightly below room temperature (T s = 288 K). This structural transition involves a tilting of Fe–O–V bond angles and strongly influences the magnetic correlation within the Fe triangular lattice. The magnetic susceptibility measurements reveal a ferromagnetic transition near 7 K. Single crystal neutron diffraction confirms the structural distortion and the ferromagnetic spin ordering in Na 2 BaFe(VO 4 ) 2 . The magnetic structure of the ordered state is modeled in the magnetic space group C2'/c' that implies a ferromagnetic order of the a and c moment components and antiferromagnetic arrangement for the b components. Altogether, the Fe magnetic moments form ferromagnetic layers that are stacked along the c-axis, where the spins point along one of the (111) facets of the FeO 6 octahedron.
Synchrotron X-ray radiation Laue diffraction is a widely used diagnostic technique for characterizing the microstructure of materials. An exciting feature of this technique is that comparable numbers of reflections can be measured several orders of magnitude faster than using monochromatic methods. This makes polychromatic beam diffraction a powerful tool for time-resolved microstructural studies, critical for understanding pressure-induced phase transition mechanisms, by in situ and in operando measurements. The current status of this technique, including experimental routines and data analysis, is presented along with some case studies. The new experimental setup at the High-Pressure Collaborative Access Team (HPCAT) facility at the Advanced Photon Source, specifically dedicated for in situ and in operando microstructural studies by Laue diffraction under high pressure, is presented.
Abstract Accurate knowledge of the phase transitions and thermoelastic properties of candidate iron alloys, such as Fe‐Si alloys, is essential for understanding the nature and dynamics of planetary cores. The phase diagrams of some Fe‐Si alloys between 1 atm and 16 GPa have been back‐extrapolated from higher pressures, but the resulting phase diagram of Fe 83.6 Si 16.4 (9 wt.% Si) is inconsistent with temperature‐induced changes in its electrical resistivity between 6 and 8 GPa. This study reports in situ synchrotron X‐ray diffraction (XRD) measurements on pre‐melted and powder Fe 83.6 Si 16.4 samples from ambient conditions to 60 GPa and 900 K using an externally heated diamond‐anvil cell. Upon compression at 300 K, the bcc phase persisted up to ∼38 GPa. The hcp phase appeared near 8 GPa in the pre‐melted sample, and near 17 GPa in the powder sample. The appearance of the hcp phase in the pre‐melted sample reconciles the reported changes in electrical resistivity of a similar sample, thus resolving the low‐pressure region of the phase diagram. The resulting high‐temperature Birch‐Murnaghan equation of state (EoS) and thermal EoS based on the Mie‐Gruneisen‐Debye model of the bcc and hcp structures are consistent with, and complement the literature data at higher pressures. The calculated densities based on the thermal EoS of Fe‐9wt.%Si indicate that both bcc and hcp phases agree with the reported core density estimates for the Moon and Mercury.
An essential goal of the Higgs physics program at the LHC and beyond is to explore the nature of theHiggs potential and shed light on the mechanism of electroweak symmetry breaking. An important classof models alter the thermal history of electroweak symmetry breaking from the predictions of the StandardModel (SM). This paper reviews the existence of a region of parameter space where a strong first-orderelectroweak phase transition is compatible with exotic decays of the SM-like Higgs boson. A dedicatedsearch for exotic Higgs decays can actively explore this framework at the Large Hadron Collider (LHC),while future exotic Higgs decay searches at the high-luminosity LHC and future Higgs factories will bevital to conclusively probe the scenario.
Sphere packing is an ancient problem. The densest packing is known to be a face-centered cubic (FCC) crystal, with space-filling fraction Φ FCC = π / √ 18 ≈ 0.74 . The densest “random packing,” random close packing (RCP), is yet ill defined, although many experiments and simulations agree on a value Φ RCP ≈ 0.64 . We introduce a simple absorbing-state model, biased random organization (BRO), which exhibits a Manna class dynamical phase transition between absorbing and active states that has as its densest critical point Φ cmax ≈ 0.64 ≈ Φ RCP and, like other Manna class models, is hyperuniform at criticality. The configurations we obtain from BRO appear to be structurally identical to RCP configurations from other protocols. This leads us to conjecture that the highest-density absorbing state for an isotropic biased random organization model produces an ensemble of configurations that characterizes the state conventionally known as RCP.
In this contribution, the solid-state low-temperature phase structure of [2,2]-paracyclophane is unambiguously characterised by single-crystal X-ray analysis. Additionally, a heat capacity measurement was undertaken, which proves the existence of a λ-type phase transition at 45 K, a transition that is connected with the formation of a secondary C p /T feature at 60 K. The low-temperature phase (<45 K) crystallises in the lower symmetry space group P 4¯ n2, whereas the high-temperature phase (>60 K) crystallises in space group P4 2 /mnm. This proves what has been postulated both by experimental and theoretical chemists but has repeatedly been dismissed as speculation many times.
We study the application of a magnetic field transverse to the easy axis, Ising direction in the quasi-two-dimensional kagome staircase magnet, Co 3 V 2 O 8 , induces three quantum phase transitions at low temperatures, ultimately producing a novel high field polarized state, with two distinct sublattices. New time-of-flight neutron scattering techniques, accompanied by large angular access, high magnetic field infrastructure allow the mapping of a sequence of ferromagnetic and incommensurate phases and their accompanying spin excitations. Also, at least one of the transitions to incommensurate phases at μ 0 H c1 ~6.25 T and μ 0 H c2 ~7 T is discontinuous, while the final quantum critical point at μ 0 H c3 ~13 T is continuous.
Here, we study the temperature-dependent phonon modes of the organometallic lead iodide perovskite CH 3 NH 3 PbI 3 thin film across the terahertz (0.5–3 THz) and temperature (20–300 K) ranges. These modes are related to the vibration of the Pb–I bonds. We found that two phonon modes in the tetragonal phase at room temperature split into four modes in the low-temperature orthorhombic phase. By use of the Lorentz model fitting, we also analyze the critical behavior of this phase transition. The carrier mobility values calculated from the low-temperature phonon mode frequencies, via two theoretical approaches, are found to agree reasonably with the experimental value (~2000 cm 2 V –1 s –1 ) from a previous time-resolved THz spectroscopy work. Thus, we have established a possible link between terahertz phonon modes and the transport properties of perovskite-based solar cells.
Phase transitions (PTs) and frustrations in two-dimensional structures described by a three-vertex antiferromagnetic Potts model on a triangular lattice are investigated by the Monte Carlo method with regard to nearest and next-nearest neighbors with interaction constants J{sub 1} and J{sub 2}, respectively. PTs in these models are analyzed for the ratio r = J{sub 2}/J{sub 1} of next-nearest to nearest exchange interaction constants in the interval |r| = 0–1.0. On the basis of the analysis of the low-temperature entropy, the density of states function of the system, and the fourth-order Binder cumulants, it is shown that a Potts model with interaction constants J{sub 1} < 0 and J{sub 2} < 0 exhibits a first-order PT in the range of 0 ⩽ r < 0.2, whereas, in the interval 0.2 ⩽ r ⩽ 1.0, frustrations arise in the system. At the same time, for J{sub 1} > 0 and J{sub 2} < 0, frustrations arise in the range 0.5 < |r| < 1.0, while, in the interval 0 ⩽ |r| ⩽ 1/3, the model exhibits a second-order PT.
Advantageous optoelectronic properties of methylammonium lead triiodide likely arise from coupling between photogenerated charge-carriers and the soft, deformable lattice. We investigate structural dynamics of MAPbI 3 films using time-resolved X-ray diffraction versus pump-probe time delay and pump intensity. During the first nanosecond, the lattice anisotropically distorts from tetragonal to cubic at excitation intensities that are insufficient to thermally induce the first-order thermodynamic phase transition at 330K. Further, the high-symmetry structure then relaxes back to the starting phase with 11 and 236-ns time constants via a different transition pathway than observed either in the first nanosecond or in previous reports for MAPbI 3 . Early-time dynamics are consistent with polaron formation and lattice strain stabilization while the slower recovery dynamics outlive radiative recombination and relates metastability. Fluence-independence of these lattice deformations in the low-power regime conveys relevance to optoelectronics including photovoltaics and highlights sustained involvement of non-equilibrium, photoinduced lattice reorganization in MAPbI 3 under functional conditions.