SEARCH · Engineering Papers

Results for “Performance Ratio”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

All sources NASA NTRS DOE OSTI

NASA NTRS2008

On-Orbit Noise Characterization for MODIS Reflective Solar Bands

Since launch, the Moderate Resolution Imaging Spectroradiometer (MODIS) has operated successfully on-board the NASA Earth Observing System (EOS) Terra and EOS Aqua spacecraft. MODIS is a passive cross-track scanning radiometer that makes observations in 36 spectral bands with spectral wavelengths from visible (VIS) to long-wave infrared. MODIS bands 1-19 and 26 are the reflective solar bands (RSB) with wavelengths from 0.41 to 2.2 micrometers. They are calibrated on-orbit using an on-board solar diffuser (SD) and a SD stability monitor (SDSM) system. For MODIS RSB, the level 1B calibration algorithm produces top of the atmosphere reflectance factors and radiances for every pixel of the Earth view. The sensor radiometric calibration accuracy, specified at each spectral band's typical scene radiance, is 2% for the RSB reflectance factors and 5% for the RSB radiances. Also specified at the typical scene radiance is the detector signal-to-noise ratio (SNR), a key sensor performance parameter that directly impacts its radiometric calibration accuracy and stability, as well as the image quality. This paper describes an on-orbit SNR characterization approach developed to evaluate and track MODIS RSB detector performance. In order to perform on-orbit SNR characterization, MODIS RSB detector responses to the solar illumination reflected from the SD panel must be corrected for factors due to variations of the solar angles and the SD bi-directional reflectance factor. This approach enables RSB SNR characterization to be performed at different response levels for each detector. On-orbit results show that both Terra and Aqua MODIS RSB detectors have performed well since launch. Except for a few noisy or inoperable detectors which were identified pre-launch, most RSB detectors continue to meet the SNR design requirements and are able to maintain satisfactory short-term stability. A comparison of on-orbit noise characterization results with results derived from pre-launch calibration and characterization are also provided.

Xiong, X.↗

NASA NTRS2010

Measurement Techniques for Transmit Source Clock Jitter for Weak Serial RF Links

Techniques for filtering clock jitter measurements are developed, in the context of controlling data modulation jitter on an RF carrier to accommodate low signal-to-noise ratio thresholds of high-performance error correction codes. Measurement artifacts from sampling are considered, and a tutorial on interpretation of direct readings is included.

Lansdowne, Chatwin A.↗

NASA NTRS2012

Large Eddy Simulation of a Film Cooling Flow Injected from an Inclined Discrete Cylindrical Hole into a Crossflow with Zero-Pressure Gradient Turbulent Boundary Layer

A Large Eddy Simulation (LES) is performed of a high blowing ratio (M = 1.7) film cooling flow with density ratio of unity. Mean results are compared with experimental data to show the degree of fidelity achieved in the simulation. While the trends in the LES prediction are a noticeable improvement over Reynolds-Averaged Navier-Stokes (RANS) predictions, there is still a lack a spreading on the underside of the lifted jet. This is likely due to the inability of the LES to capture the full range of influential eddies on the underside of the jet due to their smaller structure. The unsteady structures in the turbulent coolant jet are also explored and related to turbulent mixing characteristics

Johnson, Perry L.↗

NASA NTRS2013

Testing of the Trim Tab Parametric Model in NASA Langley's Unitary Plan Wind Tunnel

In support of NASA's Entry, Descent, and Landing technology development efforts, testing of Langley's Trim Tab Parametric Models was conducted in Test Section 2 of NASA Langley's Unitary Plan Wind Tunnel. The objectives of these tests were to generate quantitative aerodynamic data and qualitative surface pressure data for experimental and computational validation and aerodynamic database development. Six component force-and-moment data were measured on 38 unique, blunt body trim tab configurations at Mach numbers of 2.5, 3.5, and 4.5, angles of attack from -4deg to +20deg, and angles of sideslip from 0deg to +8deg. Configuration parameters investigated in this study were forebody shape, tab area, tab cant angle, and tab aspect ratio. Pressure Sensitive Paint was used to provide qualitative surface pressure mapping for a subset of these flow and configuration variables. Over the range of parameters tested, the effects of varying tab area and tab cant angle were found to be much more significant than varying tab aspect ratio relative to key aerodynamic performance requirements. Qualitative surface pressure data supported the integrated aerodynamic data and provided information to aid in future analyses of localized phenomena for trim tab configurations.

Murphy, Kelly J.↗

NASA NTRS2018

Comet Hitchhiker: NIAC Phase 1 Final Report

Summary of Activities-Developed the Comet Hitchhiker concept, which is to hitch rides on small bodies (asteroids and comets) using a tethered spacecraft. (Section 2)-Identified five scientifically important missions that would be enabled or significantly benefited by the Comet Hitchhiker concept.The five mission concepts are: KBO rendezvous, Centaur rendezvous, Trojan rendezvous, Damocloid rendezvous, and Main asteroid belt tour to rendezvous with multiple (10) objects. (Section 3)-Derived the Space Hitchhike Equation, or "the rocket equation for hitchhiker", which relates the specific strength of tether, mass ratio, and V. (Section 4.1)-Performed in-depth feasibility analysis of the critical components of the concept through: Finite-element simulations of tether and spacecraft dynamics, as shown in Figure 1 (Section 4.4); Supercomputer simulations of the hypervelocity impact of harpoon on a small body, as shown in Figure 2. (Section 6)-Performed public outreach activities including the collaboration with a concept artist of the Museum of Science Fiction, exposure to media, and public presentations. (Section 8)

Deep Space↗

NASA NTRSDate not supplied

Emitter Surface Temperature Measurements of a 25-A class Hollow Cathode

Measurements of the emitter surface temperature of a hollow cathode were made using an optical ratio pyrometer. These measurements were performed to provide insight into the effect of various cathode operating parameters on emitter surface peak temperature and temperature distribution

Hollow Cathode↗

NASA NTRS2024

An Approach to Evaluating the Impact of Small-Core Turbofan Technologies on Engine and Aircraft Performance

NASA’s Hybrid Thermally Efficient Core (HyTEC) project aims to accelerate the development of small-core turbofan engine technologies to enable a fuel burn reduction of 5 to 10 percent for next-generation aircraft, compared to 2020s best-in-class technology. This paper presents a demonstration of methods for evaluating the potential performance impact of small-core engine technologies developed under Phase 1 of the HyTEC project. The approach involves model-based systems analysis, where small-core innovations are integrated into baseline turbofan and aircraft systems models, creating a notional vision system. Performance of the vision system is examined at both the engine and vehicle level. The examined performance metrics include: engine bypass ratio, overall pressure ratio, high pressure compressor exit corrected mass flow, and aircraft fuel burn. The CFM LEAP-1B28 and Boeing 737 MAX 8 are chosen as the baseline state-of-the-art systems. Preliminary results map a design space for the small-core vision system and quantify the distinct effects of technologies on the key metrics.

Michael A Bennett↗

NASA NTRSDate not supplied

An Approach to Evaluating the Impact of Small-core Turbofan Technologies on Engine and Aircraft Performance

Michael Bennett↗

NASA NTRSDate not supplied

Development of an Additively Manufactured Subscale Secondary Sealed Container for the NASA FROSTE Project

This presentation details the development of an additively manufactured (AM) subscale test article for the secondary sealed container (SSC) as part of the NASA FROSTE project. FROSTE is focused on the collection of regolith samples from shadowed regions of the Moon and the preservation of those samples at cryogenic temperatures for return to Earth. Our team was integrated into the FROSTE program to leverage innovative design approaches and additive manufacturing capabilities in support of a scalable development strategy, where the subscale configuration serves as the development path toward a full-scale SSC. Scalmalloy was selected as the primary material for all AM components due to its favorable strength-to-weight ratio, thermal conductivity, and demonstrated performance in aerospace applications. Its aluminum-based composition supports robust mechanical behavior at cryogenic temperatures while enabling efficient heat transfer and control of thermal gradients within the containment system. The SSC architecture consists of an outer container assembly that houses a phase change material (PCM) tank, which in turn contains primary containers holding the regolith. Thermal management relies on controlled conductive and radiative heat transfer, including a thermal connection assembly that interfaces the PCM tank to an external cryocooler via a thermal strap, and IMLI surrounding the PCM tank to inhibit radiative heat transfer. The outer container assembly incorporates sealing interfaces, thermal connection ports, and I/O feedthroughs, with PTFE spring seals used at critical interfaces to maintain containment integrity. The PCM tank is manufactured as a single monolithic Scalmalloy component and incorporates an integral lattice structure to minimize thermal gradients, internal channels for thermocouple routing, and interface features for thermal connection assembly integration. The tank is centrally suspended within the outer container using support rings, with G10 insulating components employed to inhibit thermal leaks. This work describes the design methodology, AM approach, and key considerations used to inform the design.

regolith↗

DOE OSTI2011

Measurements of the CKM angle gamma at BaBar

We report on our recent measurements of the Cabibbo-Kobayashi-Maskawa CP-violating phase {gamma} and of related CP-asymmetries and branching fraction ratios. The measurements have been performed on samples of up to 465 million B{bar B} pairs collected by the BABAR detector at the SLAC PEP-II asymmetric-energy B factory in the years 1999-2007.

43 PARTICLE ACCELERATORS↗

DOE OSTI2016

The Effect of Support Rod on Film Boiling Heat Transfer for Hot Metal Sphere in Subcooled Water

In fuel-coolant interaction (FCI), the heat transfer of corium has been conventionally evaluated by the correlations with a sphere developed in boiling region for subcooled film. However, these correlations do not give significant consideration on the support rod for the sphere from their developments, although Nishio et al. pointed out that the heat transfer and the vapor film collapsing mode would depend on H/D ratio. In this study, we performed experimental tests with the SS316 sphere (10 mm) and found the noticeable increase on the heat transfer in subcooled film boiling region with the deeper immersion depth and larger diameter of support rod. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Electrospun Nanofibers

Electrospun nanofibers have been considered promising separator candidates for lithium–sulfur (Li–S) batteries due to their unique properties, including but not limited to their high surface area, superior surface-to-volume ratio, excellent flexibility, good mechanical performance, etc. This chapter aims to provide an overview of research in electrospun nanofibers with their applications in Li–S batteries. It starts with a brief introduction to Li–S batteries, followed by the principle and advantages of electrospun nanofibers performed in this area. Applications of electrospun separators in Li–S batteries have been further discussed in detail. In the end, a future vision regarding challenges and perspectives is proposed to provide insightful comments in this field. It is believed that this chapter will provide an extensive and comprehensive reference to utilize this advanced technique to generate novel nanofiber separators for next-generation Li–S batteries.

Zhu, Jiadeng↗

DOE OSTI2022

Energy and exergy analysis of multi-stage vacuum membrane distillation integrated with mechanical vapor compression

Membrane distillation (MD) is a promising candidate for desalinating hypersaline brine, but its poor energy efficiency has remained a major barrier for widespread application. One possible solution to this issue is to recover the latent heat in the process. In this work, a multi-stage vacuum MD (MSVMD) was integrated with a mechanical vapor compressor (MVC) to enhance the latent heat recovery, and the energetic and exergetic performance of this integrated process was examined. A comprehensive energy and exergy analysis is provided to compare MSVMD and MSVMD-MVC processes for desalination of hypersaline brine. This analysis was conducted by examining the effect of the compression ratio on the energetic and exergetic performance, and the findings are reported in terms of specific thermal energy consumption (STEC), specific electricity consumption (SEC), and exergetic efficiency. The energy analysis shows that thermal energy consumption can be reduced as the compression ratio increases, due to the enhancement of latent heat recovery. The MSVMD-MVC process can be operated in a steady-state condition, without the need for thermal heat input; with STEC and SEC of 0 and 49 kWh/m 3 at the feed temperature of 50 °C and MVC compression ratio of 2.14. Moreover, exergy analysis demonstrates the efficacy of the eNRTL model in exergy calculation. Exergy destruction can be greatly reduced by increasing the compression ratio to an optimal value. For high salinity brine (124 g/L), MSVMD-MVC achieved a higher exergetic efficiency of 6.85%, compared to 2.42% in MSVMD. Furthermore, the result suggests that the application of MVC can intensify the energy efficiency and exergetic efficiency of the MSVMD system, although this process cannot outperform the current desalination technologies from the standard primary energy point of view.

42 ENGINEERING↗

DOE OSTI2011

Thermal Performance of Uninsulated and Partially Filled Wall Cavities: Preprint

Low-rise, wood-framed homes are the most common type of residential structures in the United States. Wood wall construction supports roofs efficiently and provides a stable frame for attaching interior and exterior wall coverings. Wall cavities are prevalent and increase thermal resistance, particularly when they are filled with insulating material. This paper describes detailed computational fluid dynamics modeling to evaluate the thermal performance of uninsulated or partially filled wall cavities and accounts for conduction through framing, convection, and radiation. Parameters are ambient outdoor temperature, cavity surface emissivity, cavity aspect ratio, and insulation height. Understanding the thermal performance of uninsulated or partially insulated wall cavities is essential for conserving energy in residential buildings. The results can serve as input for building energy simulation tools such as DOE2 and EnergyPlus for modeling the temperature dependent energy performance of new and older homes with uninsulated or partially insulated walls.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

NASA NTRS1996

Experimental evaluation of the ignition process of carbon monoxide and oxygen in a rocket engine

Carbon monoxide and oxygen ignition boundaries were determined in a spark torch igniter as a function of propellant inlet temperatures. The oxygen temperature was varied from ambient to -258 F, and the carbon monoxide temperature was varied from ambient to -241 F. With the oxygen and carbon monoxide at -253 F and -219 F, respectively, they successfully ignited between mixture ratios of 2.42 and 3.10. Analysis of the results indicated that the lower ignition boundary was more sensitive to oxygen temperature than to carbon monoxide temperature. Another series of tests was performed in a small simulated rocket engine with oxygen at -197 F and carbon monoxide at -193 F. An oxygen/hydrogen flame was used to initiate combustion of the oxygen and carbon monoxide. Tests performed at the optimum operating mixture ratio of 0.55 obtained steady-state combustion in every test.

Linne, Diane L.↗

NASA NTRS1984

Calculations concerning the HCO(+)/HOC(+) abundance ratio in dense interstellar clouds

Calculations have been performed to determine the rate coefficients of several reactions involved in both the formation and depletion of interstellar HCO(+) and HOC(+). The abundance of HOC(+) deduced from these calculations is consistent with the tentative identification of HOC(+) in Sgr B2 by Woods et al. (1983). The large HCO(+)/HOC(+) abundance ratio observed by Woods et al. is due at least in part to a more rapid formation rate for HCO(+) and probably due as well to a more rapid depletion rate for HOC(+).

Defrees, D. J.↗

NASA NTRS2019

Converging-Diverging Nozzle Thruster Code for Nuclear or Chemical Rocket Performance Computations

This report describes development of a variable area ratio C-D nozzle numerical computational code "THRST", applicable to the evaluation of nuclear or chemical rocket performance. The propellant for the nuclear rockets is para-hydrogen with gas properties supplied by a sub-routine, while properties for chemical thrusters need to be user input. Detailed documentation of input and output variables and sample output listings enable the report to function as a "User Manual".

Juhasz, Albert J.↗

NASA NTRS1988

Performance of Galileo's concatenated codes with nonideal interleaving

The Galileo spacecraft employs concatenated coding schemes with Reed-Solomon interleaving depth 2. The bit error rate (BER) performance of Galileo's concatenated codes, assuming different interleaving depths (including infinite interleaving depth) are compared. It is observed that Galileo's depth 2 interleaving, when used with the experimental (15, 1/4) code, requires about 0.4 to 0.5 dB additional signal-to-noise ratio to achieve the same BER performance as the concatenated code with ideal interleaving. When used with the standard (7, 1/2) code, depth 2 interleaving requires about 0.2 dB more signal-to-noise ratio than ideal interleaving.

Cheung, K.-M.↗