Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA PROBE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Improved optogalvanic detection with voltage biased Langmuir probes

Optogalvanic detectors show great potential for infrared spectroscopy, especially in cavity enhanced techniques where they, in contrast to ordinary absorption detectors, can perform intracavity measurements. This enables them to utilize the signal-to-noise ratio improvement gained from the extended effective path length inside an optical cavity, without losing signal strength due to the limited amount of light exiting through the rear mirror. However, if optogalvanic detectors are to become truly competitive, their intrinsic sensitivity and stability has to be improved. This, in turn, requires a better understanding of the mechanisms behind the generation of the optogalvanic signal. The study presented here focuses on an optogalvanic detector based on a miniaturized stripline split-ring resonator plasma source equipped with Langmuir probes for detecting the optogalvanic signal. In particular, the effect of applying a constant bias voltage to one of the probes is investigated, both with respect to the sensitivity and stability, and to the mechanism behind the generation of the signal. Experiments with different bias voltages at different pressures and gas composition have been conducted. In particular, two different gas compositions (pure CO{sub 2} and 0.25% CO{sub 2} in 99.75% N{sub 2}) at six different pressures (100 Pa to 600 Pa) have been studied. It has been shown that probe biasing effectively improves the performance of the detector, by increasing the amplitude of the signal linearly over one order of magnitude, and the stability by about 40% compared with previous studies. Furthermore, it has been shown that relatively straightforward plasma theory can be applied to interpret the mechanism behind the generation of the signal, although additional mechanisms, such as rovibrational excitation from electron-molecule collisions, become apparent in CO{sub 2} plasmas with electron energies in the 1–6 eV range. With the achieved performance improvement and the more solid theoretical framework presented here, stripline split-ring resonator optogalvanic detectors can evolve into a compact, inexpensive, and easy-to-operate alternative for future infrared spectrometers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Collisionless shock experiments with lasers and observation of Weibel instabilities

Astrophysical collisionless shocks are common in the universe, occurring in supernova remnants, gamma ray bursts, and protostellar jets. They appear in colliding plasma flows when the mean free path for ion-ion collisions is much larger than the system size. It is believed that such shocks could be mediated via the electromagnetic Weibel instability in astrophysical environments without pre-existing magnetic fields. Here, we present laboratory experiments using high-power lasers and investigate the dynamics of high-Mach-number collisionless shock formation in two interpenetrating plasma streams. Our recent proton-probe experiments on Omega show the characteristic filamentary structures of the Weibel instability that are electromagnetic in nature with an inferred magnetization level as high as ∼1% [C. M. Huntington et al., “Observation of magnetic field generation via the weibel instability in interpenetrating plasma flows,” Nat. Phys. 11, 173–176 (2015)]. These results imply that electromagnetic instabilities are significant in the interaction of astrophysical conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mechanisms responsible for the initiation of a fast breakdown in an atmospheric discharge

Here, the initial stage of the fast electrical breakdown of an air gap with a pin-to-plane electrode geometry is studied on a nanosecond time scale using multi-frame laser probing with an exposure time of 70 ps and spatial resolution as high as 3–4 μm. We find that the gap breakdown is associated with the fast (≲1 ns) formation of a micron-sized (~10 μm) cathode spot that appears as a plasma with an electron density of ${n}_{e}\approx {10}^{19}\,{\mathrm{cm}}^{-3}$. The spot is then transformed into a spark channel having an electron density of ${n}_{e}\sim {10}^{19}\mbox{–}{10}^{20}\,{\mathrm{cm}}^{-3}$. Within ~1 ns after the breakdown the dynamics of the highly ionized near-cathode plasma governs the current capacity of the discharge gap as well as the current rise rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neutralizer Characterization of a NEXT Multi-Thruster Array With Electrostatic Probes

Neutralizers in a multi-thruster array configuration were characterized using conventional diagnostics such as peak-to-peak keeper oscillation amplitude as well as unconventional methods which featured the application of electrostatic probes. The response of the array local plasma environment to neutralizer flow rate changes were documented using Langmuir probes and retarding potential analyzers. Such characterization is necessary for system efficiency and stability optimization. Because the local plasma environment was measured in conjunction with the neutralizer characterization, particle fluxes at the array and thus array lifetime impacts associated with neutralizer operating mode could also be investigated. Neutralizer operating condition was documented for a number of multithruster array configurations ranging from three-engines, three-neutralizers to a single engine, one-neutralizer all as a function of neutralizer flow rate.

Foster, John E.↗

Verification of theory on weak turbulence relating to the sequence of diffuse plasma resonances in space.

An interpretation of the sequence of diffuse plasma resonances observed by space probes (Alouette 2 and ISIS-1 satellites) is developed in terms of wave-particle nonlinear interaction in a weakly turbulent plasma including the electrostatic electron cyclotron harmonic wave instability. The longest time duration of the center frequency of the diffuse plasma resonance is found to coincide with the most favorable condition for the electrostatic electron cyclotron harmonic wave instability which is obtained by solving the dispersion equation obtained for a linear approximation of the kinetic wave equation for the warm magnetoactive plasma. The electrostatic field due to the transmission of the intense rf pulse produces plasma turbulence involving nonlinear wave-wave interaction and temperature anisotropy which leads to instability. This instability supplies energy to the turbulence. The process can be thought of as a feedback system.

Oya, H.↗

Fluctuation spectra in the NASA Lewis bumpy-torus plasma

The electrostatic potential fluctuation spectrum in the NASA Lewis bumpy-torus plasma was studied with capacitive probes in the low pressure (high impedance) mode and in the high pressure (low impedance) mode. Under different operating conditions, the plasma exhibited electrostatic potential fluctuations (1) at a set of discrete frequencies, (2) at a continuum of frequencies, and (3) as incoherent high-frequency turbulence. The frequencies and azimuthal wave numbers were determined from digitally implemented autopower and cross-power spectra. The azimuthal dispersion characteristics of the unstable waves were examined by varying the electrode voltage, the polarity of the voltage, and the neutral background density at a constant magnetic field strength.

Singh, C. M.↗

Direct current dielectric barrier assistant discharge to get homogeneous plasma in capacitive coupled discharge

In this paper, we propose a method to get more homogeneous plasma in the geometrically asymmetric capacitive coupled plasma (CCP) discharge. The dielectric barrier discharge (DBD) is used for the auxiliary discharge system to improve the homogeneity of the geometrically asymmetric CCP discharge. The single Langmuir probe measurement shows that the DBD can increase the electron density in the low density volume, where the DBD electrodes are mounted, when the pressure is higher than 5 Pa. By this manner, we are able to improve the homogeneity of the plasma production and increase the overall density in the target volume. At last, the finite element simulation results show that the DC bias, applied to the DBD electrodes, can increase the homogeneity of the electron density in the CCP discharge. The simulation results show a good agreement with the experiment results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-dimensional measurements of plasma parameters in an inductively coupled plasma processing chamber

Inductively coupled plasmas (ICPs) are extensively used for materials processing and microelectronics fabrication. However, their electromagnetic properties have not been fully characterized. In this regard, we have performed fully three dimensional (3D), time dependent measurements of the magnetic field, electron density, and electron temperature for an ICP sustained in argon in an industrial reactor designed for plasma etching in microelectronics fabrication. These measurements were compared to modeling results. The plasma was generated using pulsed power delivered at 2 MHz by a planar coil. The magnetic field was measured using a three axis magnetic probe at 15 366 locations throughout the plasma volume during the H-mode portion of the pulse at temporal intervals of 2 ns. A swept Langmuir probe was used to measure plasma parameters at the same locations. The plasma density measurement was calibrated with line-integrated densities obtained using a 96 GHz interferometer. During a single radio frequency (RF) cycle, the 3D current density [derived from B(r→,t)]is initially maximum just below the coil and moves downward toward the center of the chamber. Isosurfaces of current are nearly symmetric toroids. The total electric field, space charge field, and inductive electric field were derived and used to calculate the dissipated power, plasma current, and Poynting flux. Computer modeling of the experiment reproduces the phase dependent behavior. Animations showing the time dependent 3D measurements are presented in the supplementary material.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Understanding helicon plasmas

This paper presents a comprehensive overview of work on the helicon plasmas and also discusses various aspects of RF power deposition in such plasmas. Some of the work presented here is a review of earlier work on theoretical [A. Ganguli et al., Phys. Plasmas 14, 113503 (2007)] and experimental [A. Ganguli et al., Plasma Sources Sci. Technol. 20(1), 015021 (2011)] investigations on helicon plasmas in a conducting cylindrical waveguide for m = -1 mode. This work also presents an approach to investigate the mechanisms by which the helicon and associated Trivelpiece-Gould (TG) waves are responsible for RF power deposition in Helicon discharges. Experiment design adopts the recent theory of damping and absorption of Helicon modes in conducting waveguides [A. Ganguli et al., Phys. Plasmas 14, 113503 (2007)]. The effort has also been made to detect the warm electrons, which are necessary for ionization, because Helicon discharges are of high density, low T{sub e} discharges and the tail of the bulk electron population may not have sufficient high-energy electrons. Experimental set up also comprises of the mirror magnetic field. Measurements using RF compensated Langmuir probes [A. Ganguli et al., Plasma Sources Sci. Technol. 17, 015003 (2008)], B-dot probe and computations based on the theory shows that the warm electrons at low pressure (0.2-0.3 mTorr) Helicon discharges, are because of the Landau damping of TG waves. In collisional environment, at a pressure Almost-Equal-To 10 mTorr, these high-energy electrons are due to the acceleration of bulk electrons from the neighboring regions across steep potential gradients possibly by the formation of double layers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-dimensional bispectral analysis of drift wave turbulence in a cylindrical plasma

Bispectral analysis and multichannel measurement are becoming attractive investigation tools in plasma fluctuation studies. In the Large Mirror Device-Upgrade, the measurement of fluctuations in the ion saturation-current with a 64-channel poloidal Langmuir probe array was performed. The two-dimensional (2D) (poloidal wave number and frequency) power spectrum showed a number of pronounced peaks and broadband fluctuations in the poloidal wave number-frequency space. We applied 2D bispectral analysis, which considers both the matching conditions of poloidal wave number and frequency, to the spatiotemporal waveform, and confirmed the nonlinear couplings between coherent-coherent, coherent-broadband, and broadband-broadband fluctuation components. More than ten peaks were revealed to have as their origins only three original parent modes generated in the plasma. Comparison between the theoretical estimate and experimental observation for the bicoherence showed good agreement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of plasma diagnostics using a dual frequency harmonic technique

Plasma diagnostic methods using harmonic currents analysis of electrostatic probes were experimentally investigated to understand the differences in their measurement of the plasma parameters. When dual frequency voltage (ω{sub 1},ω{sub 2}) was applied to a probe, various harmonic currents (ω{sub 1}, 2ω{sub 1},ω{sub 2}, 2ω{sub 2},ω{sub 2}±ω{sub 1},ω{sub 2}±2ω{sub 1}) were generated due to the non-linearity of the probe sheath. The electron temperature can be obtained from the ratio of the two harmonics of the probe currents. According to the combinations of the two harmonics, the sensitivities in the measurement of the electron temperature differed, and this results in a difference of the electron temperature. From experiments and simulation, it is shown that this difference is caused by the systematic and random noise.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PC-5 Waves and Low Energy Plasma in the Outer Magnetosphere

The Interball Tail Probe crosses the dayside magnetopause at low latitudes where it frequently measures low energy ion plasma (<100 eV) in the outer magnetosphere. We present the wave characteristics associated with this cold component.

Gallanger, Dennis L.↗

Power balance and wall erosion measurements in a helicon plasma

The power balance measurements in a 1 kW argon helicon plasma discharge are demonstrated. The quantitative wall heat flux measurements using nonintrusive infrared imaging of the glass tube surface, along with data from bolometric probes and calibrated photodiodes to measure heat flux from the rest of the plasma, are shown. For the cylindrical discharge, with radius much less than the axial length, approximately 15% of 1 kW input power is lost in the transmission lines and matching network, 54% is lost through radial particle transport to the walls, 16% is lost through radiation, and 8% is lost through ion impact in the vicinity of the antenna. Wall erosion of the confining glass tube occurs due to sputter etching by ions accelerated in the electrostatic fields produced by the antenna. Wall etch rate measurements are used to quantify particle fluxes to the wall, which are in rough agreement with particle fluxes calculated from thermal flux.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Efficient propagation of ultra-intense laser beam in dense plasma

Ultra intense laser propagation in extended, dense plasma is investigated through optical and proton probing. When a >1 kJ, 10 ps laser propagates into a long-density scale length plasma, channel formation was observed up to 0.6 nc from the analysis of optical probe images. The proton track analysis shows the formation of strong electric and magnetic fields along the plasma channel, which may lead to the observed collimated electron beam on the laser axis. These results are promising for the feasibility of the direct irradiation scheme of fast ignition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An apparatus for the characterization of warm, dense deuterium with inelastic x-ray scattering

Here, we present an instrument platform for studying shock-compressed deuterium on moderately sized laser facilities. The target is designed for cryogenic liquid deuterium to be compressed with a sub-kJ laser pulse. The x-ray probe is the narrow band 2005 eV Si Ly-α resonance produced by a 200J laser incident on a Si 3 N 4 foil. Scattered x-ray collection occurs in the backward and forward directions; spectral dispersion with Bragg crystals yields the plasma conditions of density and temperature. Additionally, the shock is probed with velocity interferometry. Combined with the electron density measurements from forward scattering, this allows average ionization state to be inferred. Proof of principle experiments demonstrate the viability of this technique for studies of the ionization of deuterium along the Hugoniot.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Double layer in a cylindrical hollow-cathode discharge

A dc cylindrical coaxial glow discharge with an inner grid anode has been studied. The region between the two electrodes is seen dark, while a brightly glowing region forms inside the grid anode up to the center. The current-voltage characteristic of a dc cylindrical glow discharge in nitrogen is similar to that of a normal glow discharge, while the normal glow discharge voltage decreases with increasing pressure. The minimum plasma potentials are observed in the hollow cathode region due to the accumulation of electrons at the back of the grid anode. At the center, some of the passed electrons are converged, so their potential is decreased. These electrons have a sufficient time to be redistributed to form one group with a Maxwellian electron energy distribution function. The electron temperature measured by electric probes varies from 1.6 to 3.6 eV, while the plasma density varies from 3.9 x 10{sup 16} to 7 x 10{sup 13} m{sup -3}, depending on the discharge current and probe position. The plasma density increases as the electrons move radially from the grid toward the central region, while their temperature decreases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electric fields in the plasma sheet and plasma sheet boundary layer

Data from the spherical double probe electric-field experiment on ISEE-1 were used to study plasmasheet/lobe boundary crossings during substorms, identified by plasma measurements and by using the electric field probes as a reference for measurements of the spacecraft potential. There are strong electric fields, with a dominant dawn-to-dusk component, throughout the boundary layer outside the plasmasheet for contracting and expanding motions of the plasmasheet and for different magnetic field directions. Characteristic amplitudes and durations are 5 to 10 mV/m and 5 to 15 min. The corresponding E x B vectors are always towards the plasmasheet.

Pedersen, A.↗