Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Notes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Docking system of androgynous and peripheral type

Soviet and American space engineers have proceeded with creating compatible means for closing and docking spacecraft. It was decided to make a new advanced docking system of a peripheral and androgynous type. Because of a more complex design of the new-type docking mechanism, a number of technical problems arose. To a great extent, the solution of these problems depends on a chosen concept of the docking mechanism. The report deals with the docking system concept accepted by the Soviet engineers as the basis for further development. The description and structural arrangement of the docking system as a whole, its basic assemblies, and a kinematic scheme of the docking mechanism using a system of differentials are given. It should be noted that the experience that was gained from the development of previous docking systems was used to create a new type of docking system. The main problems to be solved in the course of designing and developing the advanced system are noted.

Syromyatnikov, V. S.↗
NASA NTRS1970

Program analysis for documentation

A program analysis for documentation (PAD) written in FORTRAN has three steps: listing the variables, describing the structure and writing the program specifications. Technical notes on editing criteria for reviewing program documentation, technical notes for PAD, and FORTRAN program analyzer for documentation are appended.

Lolmaugh, G. H.↗
NASA NTRS1971

Extended ion pumped vacuum friction test

Boundary layer friction data under ion pumped vacuum was taken for sixteen material couples. The test series was an extension of a previous study of the effects of modified ion pumped environments. Sliding distances imposed in the present effort greatly exceeded any studied in the previous contiguous, flight or ground tests. Wear out of specific couples, in particular, thin film lubricants was noted. The behavior of the test hardware including wear out of the mechanisms was noted. As a result, the impact of test interruption was observed for several test couples. Recovery of the friction upon re-establishing sliding in vacuum was generally rapid. The results of the extended sliding study reinforce the previous conclusion that sliding distance (mechanical history) is the primary factor in establishing the force limiting boundary layer friction. General friction value under the extended sliding confirm those observed in previous orbital and the related ground test studies.

Hammel, R. L.↗
NASA NTRS1973

A study of numerical methods of solution of the equations of motion of a controlled satellite under the influence of gravity gradient torque

Numerical methods of integration of the equations of motion of a controlled satellite under the influence of gravity-gradient torque are considered. The results of computer experimentation using a number of Runge-Kutta, multi-step, and extrapolation methods for the numerical integration of this differential system are presented, and particularly efficient methods are noted. A large bibliography of numerical methods for initial value problems for ordinary differential equations is presented, and a compilation of Runge-Kutta and multistep formulas is given. Less common numerical integration techniques from the literature are noted for further consideration.

Thompson, J. F.↗
NASA NTRS1973

Application of EREP imagery to fracture-related mine safety hazards and environmental problems in mining

The author has identified the following significant results. Numerous fracture traces were detected on both the color transparencies and black and white spectral bands. Fracture traces of value to mining hazards analysis were noted on the EREP imagery which could not be detected on either the ERTS-1 or high altitude aircraft color infrared photography. Several areas of mine subsidence occurring in the Busseron Creek area near Sullivan, Indiana were successfully identified using color photography. Skylab photography affords an increase over comparable scale ERTS-1 imagery in level of information obtained in mined lands inventory and reclamation analysis. A review of EREP color photography permitted the identification of a substantial number of non-fuel mines within the Southern Indiana test area. A new mine was detected on the EREP photography without prior data. EREP has definite value for estimating areal changes in active mines and for detecting new non-fuel mines. Gob piles and slurry ponds of several acres could be detected on the S-190B color photography when observed in association with large scale mining operations. Apparent degradation of water quality resulting from acid mine drainage and/or siltation was noted in several ponds or small lakes and appear to be related to intensive mining activity near Sullivan, Indiana.

Wier, C. E.↗
NASA NTRS1973

An experimental investigation of two-phase liquid oxygen pumping

The results of an experimental program to explore the feasibility of pumping two-phase oxygen (liquid and gas) at the pump inlet are reported. Twenty-one cavitation tests were run on a standard J-2 oxygen pump at the MSFC Components Test Laboratory. All tests were run with liquid oxygen 5 to 10 K above the normal boiling point temperature. During ten tests run at approximately at the pump inlet were noted before complete pump performance 50 percent of the nominal operating speed, two phase conditions were achieved. Vapor volumes of 40 to 50 percent at the pump inlet were noted before complete pump performance loss. The experimental results compared to predictions. Nine cavitation tests run at the nominal pump speed over a 5 K temperature range showed progressively lower net positive suction head (NPSH) requirements as temperature was increased. Two-phase operation was not achieved. The temperature varying NPSH data were used to calculate thermodynamic effects on NPSH, and the results were compared to existing data.

Gross, L. A.↗
NASA NTRS1973

Response of tobacco tissue cultures growing in contact with lunar fines.

During the quarantine periods following each Apollo mission to the moon, various biological systems were placed in the presence of lunar material to determine if pathogenic agents were present. Although no detrimental effects resulted, various responses by the several plant systems tested were noted. One such response was the increased pigmentation observed in the callus tissue cultures of tobacco. Further investigations revealed that these tissues grown in the presence of lunar material resulted in as much as a 35% increase in total pigments while differences in fatty acid and sterol concentrations were also noted when compared to the controls. It is believed that these changes brought about by the lunar material can be attributed to a change in the nutritional environment caused by its dissolution.

Weete, J. D.↗
NASA NTRS1973

Does spectroscopic evidence require two scattering layers in the Venus atmosphere.

Comments on Hunt's (1972) conclusion that the phase variation of lines in the 7820- and 7883-A CO2 bands is due to the presence of two scattering layers in the Venusian atmosphere. It is shown that the increase of equivalent width with phase between 0 and 90 deg noted by Hunt in the data by Gray Young et al. (1971) does not necessarily require a two-layer model of scattering in the Venusian atmosphere and that this increase may be due to the strong backward lobe in the Venusian cloud phase function. Hunt, in a reply, notes that Regas et al. incorrectly use in their analysis Hansen's (1969) data which are for a homogeneous planetary atmosphere, while Hunt used an inhomogeneous model of the Venusian atmosphere. In addition, further evidence to support Hunt's claim for a multilayered structure of the upper Venusian clouds is presented.

Regas, J. L.↗
NASA NTRS1973

Urban and regional land use analysis: CARETS and Census Cities experiment package

The author has identified the following significant results. Areas of post 1970 and 1972 land use changes were identified solely from the Skylab imagery from comparisons with 1970 land use maps. Most land use changes identified involved transition from agriculture to single family residential land use. The second most prominent changes identified from the Skylab imagery were areas presently under construction. Post 1970 changes from Skylab were compared with the 1972 changes noted from the high altitude photographs. A good correlation existed between the change polygons mapped from Skylab and those mapped from the 1972 high altitude aerial photos. In addition, there were a number of instances where additional built-up land use not noted in the 1972 aerial photo as being developed were identified on the Skylab imagery. While these cases have not been documented by field observation, by correlating these areas with the appearance of similar land use areas whose identity has been determined, we can safely say that we have been able to map further occurrences of land use change beyond existing high altitude photo coverage from the Skylab imagery. It was concluded that Skylab data can be used to detect areas of land use change within an urban setting.

Alexander, R. H.↗
NASA NTRS1974

The noise environment of a school classroom due to the operation of utility helicopters

Noise measurements under controlled conditions have been made inside and outside of a school building during flyover operations of four different helicopters. The helicopters were operated at a condition considered typical for a police patrol mission. Flyovers were made at an altitude of 500 ft and an airspeed of 45 miles per hour. During these operations acoustic measurements were made inside and outside of the school building with the windows closed and then open. The outside noise measurements during helicopter flyovers indicate that the outside db(A) levels were approximately the same for all test helicopters. For the windows closed case, significant reductions for the inside measured db(A) values were noted for all overflights. These reductions were approximately 20 db(A); similar reductions were noted in other subjective measuring units. The measured internal db(A) levels with the windows open exceeded published classroom noise criteria values; however, for the windows-closed case they are in general agreement with the criteria values.

Hilton, D. A.↗
NASA NTRS1974

Additional development of large diameter carbon monofilament

The chemical vapor process for preparing a large diameter carbon-base monofilament from a BCl3, Ch4 and H2 gas mixture with a carbon substrate fiber was studied. The effect of reactor geometry, total gas flows and deposition temperature on the tensile strength of the monofilament were investigated. It was noted that consistent results could only be obtained when the carbon substrate fiber was cleaned. The strength of the monofilament was found to depend on the highest temperature and the temperature profile of the monofilament in the reactor. The strength of monofilament produced in the dc and RF reactors were found to be similar and similar alloy compositions in the monofilament were attained when the same gas ratios were used. The tensile strength of the monofilament at 500 C was found to be 60 to 70% of the room temperature tensile strength. No degradation was noted after exposure to molten aluminum.

Jacob, B. A.↗
NASA NTRS1973

RI 1170 advanced strapdown gyro

The major components of the RI 1170 gyroscope are described. A detailed functional description of the electronics including block diagrams and photographs of output waveshapes within the loop electronics are presented. An electronic data flow diagram is included. Those gyro subassemblies that were originally planned and subsequently changed or modified for one reason or another are discussed in detail. Variations to the original design included the capacitive pickoffs, torquer flexleads, magnetic suspension, gas bearings, electronic design, and packaging. The selection of components and changes from the original design and components selected are discussed. Device failures experienced throughout the program are reported and design corrections to eliminate the failure modes are noted. Major design deficiencies such as those of the MSE electronics are described in detail. Modifications made to the gas bearing parts and design improvements to the wheel are noted. Changes to the gas bearing prints are included as well as a mathematical analysis of the 1170 gas bearing wheel by computer analysis. The mean free-path effects on gas bearing performance is summarized.

Source record↗
NASA NTRS1973

Teleoperators and EVA for Shuttle missions

Review of the methods currently being contemplated for enabling the Space Shuttle to perform the Shuttle and payload support missions. Two general approaches to carrying out such activity are discussed - namely, the use of teleoperators and astronaut extravehicular activity (EVA). Detailed descriptions are given of an attached manipulator system (AMS) and a free-flying teleoperator (FFTO), noting the applications, capabilities, and limitations of each. The primary technology development areas for the AMS are in the areas of stabilization, structure, and manual control, while the technology areas of primary concern in the case of the FFTO include the manipulator-grappler system, the control system, the video system, and the mobility system. Four modes of EVA that are possible for the Shuttle are cited, noting the unlikelihood of direct applicability of EVA to payload deployment and retrieval and its feasibility for payload servicing and experiment support.

Malone, T. B.↗
NASA NTRS1973

K alpha line emission during solar X-ray bursts

The expected flux of K alpha line emission from sulfur, argon, calcium, and iron is calculated during both thermal and nonthermal solar X-ray events. Such emission is shown to be weak during the course of most of the nonthermal hard X-ray bursts that Kane and Anderson (1970) have observed. If Compton backscattering is significant at high energies, the flux is reduced still further for disk flares, but it is noted that the strong, near-limb burst of June 26 would have produced about 100 photons /sq cm/sec of sulfur and iron K alpha emission. The impulsive hard X-ray bursts may in general be too short-lived for much K alpha emission. It may be noted that sulfur K alpha emission in particular depends sensitively on the lower-energy limit of the nonthermal electron spectrum, assuming such a sharply defined boundary exists. During soft X-ray bursts, when temperatures of a few 10 to the 7th power K are obtained, K alpha emission from certain iron ions, specifically Fe XVIII-XXIII, may be important.

Phillips, K. J. H.↗
NASA NTRS1974

Pioneer 10 mission - Summary of scientific results from the encounter with Jupiter

Data on the Jovian atmosphere and radiation environment transmitted by Pioneer 10 as it passed by Jupiter are discussed. The presence of a strong magnetic field, of energetic electron precursers, and of flat disk-shaped particle distribution is noted at a distance of 360 Jovian radii from the planet. Previously available data on Jovian satellites are augmented from Pioneer 10 data. The normal operation of the data collecting and transmitting systems of the mission after encounter with Jupiter is noted.

Opp, A. G.↗
NASA NTRS1974

Silicate spherules in sample of regolith returned by Lunar 16 automatic station

The content of spherical fused particles in Sea of Fertility regolith increases with decrease in particle size and varies from 1 to 2 percent in the relatively coarse fractions to 3 to 4 percent in the fine fractions. Among the spherical formations was noted a wide diversity of shapes, and the most common are particles that are similar in shape to a regular sphere, which indicates the acquisition of shape in the liquid phase under the action of surface tension. As to color, the most common are the black and dark colored particles. No regularities of any kind were noted in the distribution of spherical particles by core zones. The considerable difference of the granulometric characteristics of the spherical particles and the regolith as a whole indicates that the formation of regolith particles and the spherules included in its composition occurred as the result of different, even though possibly simultaneous, processes.

Ivanov, A. V.↗
NASA NTRS1975

CO2 laser doppler systems for the measurement of atmospheric winds and turbulence

Two CO2 laser doppler systems developed by NASA and some results obtained with them are discussed. A continuous wave, monostatic system for short-range wind measurement is described, and direct comparisons between the data obtained with it and with a cup-anemometer/wind vane system and a hot-wire anemometer show excellent agreement between the systems. Improvements being made in three CW, CO2 laser doppler systems, including a filter bank for optimized signal processing and a versatile scanning system, are noted. A pulsed CO2 system for measuring clear air turbulence is described, and results of test performance on board a Convair 990 are presented. It is noted that while the system was able to measure air speed and turbulence, the range of its transmitter-atmosphere-receiver was lower than predicted, and a difference of about 20 to 30 dB existed between the actual and theoretical turbulence measurements. Factors that may account for this loss are listed.

Huffaker, R. M.↗
NASA NTRS1975

Early detection of fatigue damage in composite materials

Early detection of fatigue damage in composite materials by nondestructive inspection (NDI) techniques has been demonstrated for glass/epoxy, graphite/glass/epoxy, and graphite/epoxy composites. Modulus and temperature were monitored and a correlation between them observed. Axial modulus and torsional modulus changes were a function of the laminate orientation. Torsional modulus measurements and coin tap tests were performed at 0, 1 million, 5 million, and 10 million cycles, on axial fatigue specimens. Three distinct regions were noted. In the primary region a small but rapid change in stiffness was noted in the first few thousand cycles. This was followed by a secondary region of little or no stiffness change. The tertiary region was characterized by an increasing rate of stiffness change leading to fracture. NDI procedures including holographic interferometry, ultrasonics, penetrant, and X-ray radiography were evaluated for fatigue damage detection.

Salkind, M. J.↗