Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Material Attributes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Structural damage and phase stability of Al 0.3 CoCrFeNi high entropy alloy under high temperature ion irradiation

In this study, an initially single phase high entropy alloy (HEA) Al 0.3 CoCrFeNi was irradiated by 3 MeV Au ions to a fluence of 6 × 10 15 cm –2 (~31 dpa at damage peak) at four different temperatures ranging from 250 °C to 650 °C. Transmission electron microscopy (TEM) and Atom probe tomography (APT) were employed to study the evolution of structural damage and phase stability with irradiation temperature. Al 0.3 CoCrFeNi exhibited a similar evolution of irradiation-induced defects with temperature as compared with conventional FCC alloys. At 250 °C and 350 °C, most of the visible irradiation-induced defects were faulted 1/3$\langle{111}\rangle$ dislocation loops. As the irradiation temperature increased to 500 °C, perfect 1/2$\langle{110}\rangle$ dislocation loops were observed along with the faulted loops. At the highest irradiation temperature 650 °C, only dislocation lines and networks could be observed. Regarding phase stability, the 3 MeV Au irradiation was observed to suppress the precipitation of (Ni, Al)-enriched nano clusters and the L12 ordered structure at irradiation temperatures 250 °C to 500 °C whereas precipitation of the B2 ordered structure was accelerated at 650 °C. This resulted in qualitatively opposite precipitation behavior between the ion irradiated damage region and unirradiated region at 500 °C and 650 °C. The opposite phase stability of the ion-irradiated damage region and unirradiated region at different temperatures is attributed to the competing effects of ballistic dissolution vs irradiation enhanced diffusion on precipitation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Stable magnesium zinc oxide by reactive Co-Sputtering for CdTe-based solar cells

Magnesium zinc oxide (MZO) is a promising front contact material for CdTe solar cells. Due to its higher band gap than traditional CdS, MZO can reduce parasitic absorption to significantly increase short-circuit current density while also providing a benefit of conduction band offset tuning through Mg:Zn ratio optimization. MZO has been successfully implemented into CdTe devices, however its stability has been of concern. The MZO stability issue has been attributed to the presence of oxygen in the CdTe device processing ambient, leading to double-diode behavior (S-kink) in the current density-voltage curves. Here we report on MZO thin films deposited by reactive co-sputtering. The reactively co-sputtered MZO thin films have encouraging stability, show no significant variation in work function of the surface over a period of 6 months, as measured by Kelvin probe. Energy conversion efficiencies of around 16% have been achieved both with and without presence of oxygen in device processing ambients across multiple research facilities. Finally, these efficiencies should be possible to increase further by tuning of the thin film deposition and device processing parameters, especially through optimization of the back contact.

14 SOLAR ENERGY↗
DOE OSTI2024

Diazonium-Functionalized Silicon Hybrid Photoelectrodes: Film Thickness and Composition Effects on Photoelectrochemical Behavior

Aryl diazonium electrografting is a powerful method for imparting molecular functionality onto various substrates by forming a stable carbon-surface covalent bond. While the high reactivity of the aryl radical intermediate makes this method fast and reliable, it can also lead to the formation of an insulating and disordered multilayer film. These thick films affect electrochemical performance, especially for semiconductor substrates used in photoelectrochemical applications. For this work we studied the effects of film thickness and composition by electrografting in situ-generated aminobenzene diazonium salts onto both n-type and p-type silicon electrodes at fixed potentials. Next, we attached ferrocene to the amine-terminated films and probed their (photo)­electrochemical behavior. Cyclic voltammetry measurements showed decreased electrochemical reversibility with increasing diazonium film thickness; this reversibility was restored when ferrocene was incorporated throughout the film with a layer-by-layer deposition process. Finally, we compared the behavior of dark p-type electrodes to n-type photoelectrodes and observed differences in the electrochemical reversibility that we attribute to the change in potential drop across the two interfaces.

charge transfer↗
DOE OSTI2025

Modulating Poly(oligocyclobutane) Properties Through Backbone Modifications

Poly(1,n′-divinyl)oligocyclobutane (pDVOCB) has emerged as a class of poly(cycloolefin) that is amenable to chemical recycling and demonstrates promising thermomechanical properties. However, their high melting temperatures coupled with insolubility makes melt processing challenging due to thermo-oxidation of internal alkenes. To address these issues, we describe a series of polymers incorporating modifications to the pDVOCB backbone and analyze the effects on material stability and processability. Intentional migration of the internal 1,2-disubstituted alkenes to an exocyclic trisubstituted position yields isomerized pDVOCB (IpDVOCB) which exhibits a depression of thermal transitions by up to 50 °C. Conversely, elimination of stereoirregularity between enchained DVOCB oligomers through alkene saturation yields hydrogenated pDVOCB (HpDVOCB), resulting in elevated thermal transitions by up to 30 °C. Furthermore, these shifts are attributed to changes in crystal defect density which is strongly influenced by chain stereoregularity. Understanding these behaviors guides future polymer design and expands the control and use of this new class of recyclable poly(cycloolefin)s.

Differential scanning calorimetry↗
DOE OSTI2020

Dynamics at the crystal-melt interface in a supercooled chalcogenide liquid near the glass transition

Direct quantitative measurements of nanoscale dynamical processes associated with structural relaxation and crystallization near the glass transition are a major experimental challenge. These type of processes have been primarily treated as macroscopic phenomena within the framework of phenomenological models and bulk experiments. Here, we report x-ray photon correlation spectroscopy measurements of dynamics at the crystal-melt interface during the radiation induced formation of Se nano-crystallites in pure Se and in binary AsSe 4 glass-forming liquids near their glass transition temperature. We observe a heterogeneous dynamical behaviour where the intensity correlation functions g 2 (q, t) exhibits either a compressed or a stretched exponential decay, depending on the size of the Se nano-crystallites. The corresponding relaxation timescale for the AsSe 4 liquid increases as the temperature is raised, which can be attributed to changes in the chemical composition of the melt at the crystal-melt interface with the growth of the Se nano-crystallites.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The influence of particle size on the fluid dynamics of a laser-induced plasma

The interaction of a laser-induced shock wave with nanoparticles and microparticles of aluminum oxide is investigated through experiments and modeling. The chemistry and physics of the interaction between the particles and plasma generated from laser ablation shows similarities and discrete differences for the two particle sizes. For both particle sizes, early stage (< 10 μs) ionization was dominant and evidenced by higher concentrations of Al II. While both sizes exhibit ionization over the same duration, the intensity of emission was greater for nanoparticles indicating greater concentrations of ionized species. Moreover, the dispersion of species was notably more elongated for microparticles while radial dispersion was more pronounced for nanoparticles with elevated drag forces. At later stages (i.e., > 10 μs), oxidation reactions were dominant for both particle sizes, but the same distinctions in flow field were observed and attributed to particle drag. In all stages of interaction, microparticles expand axially with less drag that suppresses their radial expansion. As a result, the dispersion of reactive species was mapped over an up to 80% larger area for nanoparticles relative to microparticles. Results shown here can be applied toward advancing experimental diagnostics and particle-shock wave modeling and simulation efforts for energetic materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Hydrogen Storage Engineering Center of Excellence Adsorbent (Final Report)

The Hydrogen Storage Engineering Center of Excellence (HSECoE) team would like to thank the U.S Department of Energy’s (DOE) Hydrogen and Fuel Cell Technologies Office for the funding to embark on such a large endeavor to develop the material and engineering science related to the use of adsorbents as the storage media for automotive applications. In addition, SRNL would like to thank the many partners of the HSECoE including U.S. automotive manufacturers, GM and Ford, potential component and materials suppliers, United Technologies Research Center, Hexagon Lincoln Composites, and BASF, Universities, Oregon State University, University of Michigan, and the University of Québec, Trois Reveres, along with the Jet Propulsion Laboratory, Pacific Northwest National Laboratory, Los Alamos National Laboratory and Savannah River National Laboratory. Individual specific contributions can be found in individual final reports submitted to DOE. No attempt is made here to attribute contributions to individual people or organizations, illustrating the cooperative arrangement of the team members.

08 HYDROGEN↗
DOE OSTI2022

Layered topological semimetal GaGeTe: New polytype with non-centrosymmetric structure

GaGeTe is a layered van der Waals material composed of germanene and GaTe sublayers that has been recently predicted to be a basic Z 2 topological semimetal. To date, only one polytype of GaGeTe is known with trigonal centrosymmetric structure (α phase, space group R-3m, No. 166). Here we show that as-grown samples of GaGeTe show traces of at least another polytype with hexagonal non-centrosymmetric structure (β phase, space group P6 3 mc, No. 186). Moreover, we suggest that another bulk hexagonal polytype (γ phase, space group P-3m1, No. 164) could also be found near room conditions. Both α and β polytypes have been identified and characterized by means of X-ray diffraction and Raman scattering measurements with the support of ab initio calculations. We provide the vibrational properties of both polytypes and show that the Raman spectrum reported for GaGeTe almost forty years ago and attributed to the α phase, was, in fact, that of the secondary β phase. Additionally, we show that a Fermi resonance occurs in α-GaGeTe under non-resonant excitation conditions, but not under resonant excitation conditions. Theoretical calculations show that bulk β-GaGeTe is a non-centrosymmetric weak topological semimetal with even smaller lattice thermal conductivity than centrosymmetric bulk α-GaGeTe. In perspective, our work paves the way for the control and engineering of GaGeTe polytypes to design and implement complex van der Waals heterostructures formed by a combination of centrosymmetric and non-centrosymmetric layers of up to three different polytypes in a single material, suitable for a number of fundamental studies and technological applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Anisotropy-driven quantum criticality in an intermediate valence system

Intermetallic compounds containing f-electron elements have been prototypical materials for investigating strong electron correlations and quantum criticality (QC). Their heavy fermion ground state evoked by the magnetic f-electrons is susceptible to the onset of quantum phases, such as magnetism or superconductivity, due to the enhanced effective mass (m*) and a corresponding decrease of the Fermi temperature. However, the presence of f-electron valence fluctuations to a non-magnetic state is regarded an anathema to QC, as it usually generates a paramagnetic Fermi-liquid state with quasiparticles of moderate m*. Such systems are typically isotropic, with a characteristic energy scale T 0 of the order of hundreds of kelvins that require large magnetic fields or pressures to promote a valence or magnetic instability. Here we show the discovery of a quantum critical behaviour and a Lifshitz transition under low magnetic field in an intermediate valence compound α-YbAlB 4 . The QC origin is attributed to the anisotropic hybridization between the conduction and localized f-electrons. These findings suggest a new route to bypass the large valence energy scale in developing the QC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Single crystal growth and thermoelectric properties of Nowotny chimney-ladder compound Fe 2 Ge 3

Fe 2 Ge 3 with an incommensurate Nowotny chimney-ladder (NCL) structure is a promising material for thermoelectric applications due to its low thermal conductivity. Previous experimental studies on Fe 2 Ge 3 have mainly focused on polycrystalline samples, resulting in a limited understanding of the material's intrinsic thermoelectric properties and the underlying causes of its low thermal conductivity. Here we report the synthesis and thermoelectric properties of single crystalline Fe 2 Ge 3 . Millimeter-sized Fe 2 Ge 3 single crystals grown by the chemical vapor transport method enable the study of the intrinsic thermoelectric properties. The Seebeck coefficient of Fe 2 Ge 3 is negative and its magnitude increases linearly with temperature, showing a degenerate n-type semiconductor behavior. Analysis of the electrical resistivity and specific heat data indicates the existence of an Einstein mode with a characteristic temperature of about 60 K, suggesting the presence of low-energy optical phonons. Further, the thermal conductivity of Fe 2 Ge 3 along the c axis is as low as 1.9Wm -1 K -1 at 300 K and exhibits a nearly temperature-independent characteristic, which is distinct from the previous theoretical calculations with a stronger temperature dependence. The low thermal conductivity may be attributed to the scattering of acoustic phonons by low-energy optical modes and the presence of non-extended diffuson modes, as reported in another NCL compound, MnSi 1.74 . This study provides valuable insights into the electrical and thermal properties of Fe 2 Ge 3 , which can open up possibilities for future advances in thermoelectric applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

High-throughput measurements of CO 2 permeance and solubility in ionic liquid reveal a synergistic role of ionic interactions and void fractions

The factors that govern CO 2 solubility in ionic liquids (ILs) are of great interest for the development of new materials for CO 2 capture and utilization. The cationic functional group (i.e., imidazolium, pyrrolidinium, pyridinium, etc.), alkyl chain length of cation, degree of fluorination of anion, anion size, and the void fraction in IL are known to influence CO 2 solubility. However, a comprehensive explanation of how these factors collectively affect CO 2 solubility has not been developed yet. This knowledge gap is largely attributed to the lack of CO 2 solubility data for IL structures other than imidazolium based ILs. We report here an automated high-throughput (HT) setup for the measurement of CO 2 solubility in room-temperature ILs (RTILs) combining six different anions and nine different cations for a total of 19 different specific ranges of RTILs. The HT setup first dispenses up to 200 µL of RTILs in a 96-well microtiter plate and then utilizes a robotic arm to measure cyclic voltammogram (CV) in each well using maneuverable Ag electrodes. The Cottrell analysis of the CO 2 reduction CV peak provides a direct measurement of CO 2 permeance in RTILs, which yields Henry’s constant from the estimated diffusion coefficient of CO 2 . Henry’s constants thus obtained are in very good agreement with those reported earlier. The measured CO 2 permeance and Henry’s constant of all RTILs seem to follow a first-order dependence on void fraction and a second-order dependence on electrostatic interaction between anion and cation of IL, with some synergistic dependence on the product of a void fraction and electrostatic interaction, making them two important descriptors for the design of novel ILs.

CO2 Solubility↗
DOE OSTI2025

Dielectric-Engineered Monolayer MoS 2 Memtransistors for Brain-Inspired Computing with High Recognition Accuracy

Two-dimensional transition metal dichalcogenides (2D-TMDs)-based memtransistors have emerged as promising candidates for neuromorphic hardware due to their exceptional ability to emulate synaptic behavior. However, many existing 2D-TMDs memtransistors rely on polycrystalline channels with grain boundaries or defects introduced through postgrowth treatments, raising concerns about material integrity and the preservation of intrinsic properties. Here, in this work, we demonstrate a monocrystalline monolayer MoS 2 memtransistor fabricated on a silicon nitride (SiN X ) substrate, achieving a large resistive switching ratio of 10 4 , a dynamic range exceeding 90, along with highly linear and symmetric weight updates, minimal cycle-to-cycle variability, and low device-to-device variability. These attributes are critical for enabling high-performance neuromorphic hardware. Based on experimental data, we further show that these artificial synapses enable a recognition accuracy of more than 97% on the MNIST handwritten digits data set. Our findings present a straightforward approach to realizing 2D-TMDs memtransistors through dielectric engineering, offering a promising platform for next-generation neuromorphic computing systems.

2D TMDs↗
DOE OSTI2025

Porous and Amorphous Mn x Mo 3 S 13 Chalcogel Electrode for High-Capacity Conversion-Based Lithium-Ion Batteries

While Li-ion batteries (LIBs) are a leading energy storage technology, their energy densities are limited by the low capacity of conventional intercalation cathodes, driving interest in high energy-density Li–S batteries that make use of conversion chemistry. Achieving high capacity, reversibility, and cycle stability, and controlling volume changes in conversion batteries during the charge–discharge process, however, remains challenging. Here, in this study, we present a porous, amorphous, sulfide-based Mn x Mo 3 S 13 chalcogel, which concurrently offers high capacity and cycle stability. The solution-processable room temperature synthesized Mn x Mo 3 S 13 (x = 0.25) chalcogel exhibits a local structure that resembles the Mo 3 S 13 cluster with Mn 2+ distributed across the Mo 3 S 13 matrix, as determined by synchrotron X-ray pair distribution function (PDF) and extended X-ray absorption fine structure (EXAFS). Ab initio molecular dynamics (AIMD) simulations reveal that Mn 2+ incorporation shortens the polysulfide chain in the gel matrix compared to the Mo 3 S 13 chalcogel, while forming a coordination environment with disulfide groups, analogous to the experimental findings. A Li/Mn 0.25 Mo 3 S 13 half-cell delivers 897 mAh g –1 capacity during the first discharge and retains 571 mAh g –1 capacity after 100 cycles at a C/3 rate. Distribution of relaxation time (DRT) unveils a stable solid–electrolyte interphase (SEI) formation upon cycling that enables charge–discharge reversibility. Here, the enhanced capacity retention and cycle stability compared to those of the Li/Mo 3 S 13 cell are attributed to the reduced dissolution of active mass into the electrolyte, facilitated by the formation of shorter polysulfide chains within the Mn 0.25 Mo 3 S 13 structure and the strong affinity of Lewis-acidic Mn 2+ for polysulfide anions generated during the charge–discharge process of the Li/Mn 0.25 Mo 3 S 13 cell. Thus, this work illustrates a design principle of material for high-capacity and cycle-stable Li-metal sulfide batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

The effect of hardness on polymer-bonded pentaerythritol tetranitrate (PETN) explosive impact sensitivity

Handling sensitivity is an important property to assess when working with explosive samples and can be measured using a variety of tests, including drop-weight impact sensitivity. There exists a longstanding interest in the explosives community on the importance of measurable chemical, physical, and mechanical properties of explosives in impact sensitivity. However, most recent work in this area has explored chemical attributes rather than physical and mechanical properties of explosives. In this study, we measure hardness of explosive samples of pentaerythritol tetranitrate and Sylgard binder (XTX) during the curing process. The samples have been characterized for particle morphology through scanning electron microscopy and handling sensitivity through drop-weight impact testing. The relative importance of states of cure, methods of curing, morphology, and age of material are discussed. The data indicate that although there is a notable difference in morphology and mechanical properties for the samples as the polymer-bonded mixtures cure, the resulting changes to mechanical properties have a minimal effect on the sensitivity of the XTX.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Impact of feed variability on cesium removal with multiple actual waste samples from the Hanford site

Here, the Tank Side Cesium Removal (TSCR) system, under development by Washington River Protection Solutions (WRPS), will send initial low-activity Hanford waste tank supernate feeds to the Hanford Waste Treatment and Immobilization Plant (WTP) Low-Activity Waste (LAW) Facility. In addition to entrained solids removal from the supernate, the primary goal of TSCR is to remove cesium-137 ( 137 Cs) by ion exchange, allowing contact handling of the liquid effluent product at WTP. Crystalline silicotitanate (CST) ion exchange media, manufactured by Honeywell UOP (product IONSIV™ R9140-B), was selected as the ion exchange media at TSCR. This lot of material was found to have superior performance in comparison to historic batches of CST. Ion exchange column and batch contact testing with supernate from Hanford tanks AP-105, AP-107 and AW-102 was performed to assess the impact of feed variability on system performance. These tests demonstrated that batch contact measurements provide a reasonable prediction of column capacities with some deviation in performance attributed to column dynamics. In addition, the variability in CST capacity for cesium in the various actual waste samples does not track with historical understanding of the competing cations, suggesting that tank waste samples contain other components that may significantly impact cesium loading.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

129 I and 99 Tc Distribution Coefficients of Subsurface Sediments Collected from the Proposed Site of the Environmental Manage Disposal Facility

Performance Assessment calculations are presently underway to evaluate the Environmental Management Disposal Facility (EMDF), a proposed new low-level radioactive waste (LLW) disposal facility on the U.S. Department of Energy’s Oak Ridge Reservation (ORR). Among the large number of input parameters needed for such calculations, are distribution coefficients (K d values; radionuclide concentration solid:liquid ratio) that provide a measure of the tendency of radionuclides to bind to sediments. The objective of this study was to measure K d values of two radionuclides that may pose a disproportionately large amount of risk, 129 I and 99 Tc. The average I K d value for the 10 geological materials recovered from the proposed EMDF site was 52.3 mL/g and ranged from 2.7 to 140.9 mL/g. These values were consistent, but somewhat larger than previous measurements made with ORR sediments and were about an order of magnitude greater than those used in previous EMDF PA calculations. The median Tc K d value was 807.2 mL/g, much greater than previously reported using ORR geological materials. Five of the ten tested geological materials sorbed large quantities of Tc, suggesting that the weakly sorbing Tc(VII) species had been reduced to the very strongly binding and sparingly soluble Tc(IV) species. The five strongly sorbing sediment had apparent solubility values of approximately <10 -8 mol/L. Based on sediment properties and general ORR geological considerations, it was proposed that much of the I and Tc sorption could be attributed to the low pH (average pH = 4.94), low redox status, and/or the elevated levels of iron oxides, manganese oxides, and natural organic matter. An implication of this study is that the areas of the EMDF subsurface environment may have natural properties for attenuating I and Tc movement, thereby potentially reducing risk posed by burial of LLW at this site.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Nuclear Uncertainties Associated with the Nucleosynthesis in Ejecta of a Black Hole Accretion Disk

Abstract The simulation of heavy element nucleosynthesis requires input from yet-to-be-measured nuclear properties. The uncertainty in the values of these off-stability nuclear properties propagates to uncertainties in the predictions of elemental and isotopic abundances. However, for any given astrophysical explosion, there are many different trajectories, i.e., temperature and density histories, experienced by outflowing material, and thus different nuclear properties can come into play. We consider combined nucleosynthesis results from 460,000 trajectories from a black hole accretion disk and find the spread in elemental predictions due solely to unknown nuclear properties to be a factor of a few. We analyze this relative spread in model predictions due to nuclear variations and conclude that the uncertainties can be attributed to a combination of properties in a given region of the abundance pattern. We calculate a cross-correlation between mass changes and abundance changes to show how variations among the properties of participating nuclei may be explored. Our results provide further impetus for measurements of multiple quantities on individual short-lived neutron-rich isotopes at modern experimental facilities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Spectroscopic Studies of Charge-Transfer Character and Photoresponses of F 4 TCNQ-Based Donor–Acceptor Complexes

F 4 TCNQ (2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane) is used widely as a hole-doping agent in photoresponsive organic semiconducting materials, yet relatively little is known about the photoresponses of the F 4 TCNQ· - anion generated via doping. Furthermore, there is still relatively little systematic exploration of how the properties of the local material or chemical environment impacts the driving force for generating these charge-transfer complexes. Here we present spectroscopic and photophysical studies of F 4 TCNQ in charge-transfer complexes (CTCs) with the electron donor N,N’-Diphenyl-N-N’-di-p-tolylbenzene-1,4-diamine (MPDA) both in dichloroethane solution and polystyrene matrices. Integer charge transfer (ICT) between donor and acceptor occurs readily in dichloroethane solvent to form F 4 TCNQ· - :MPDA + CTCs, due to a ~150 mV difference in MPDA + /MPDA and F 4 TCNQ/F 4 TCNQ· - reduction potentials. Ultrafast spectroscopic studies of the CTC as well as electrochemically generated F 4 TCNQ· - and MDPA + reveal that the photoresponses of these CTCs are dominated by that of the dopant anion, including rapid deactivation (800 fs) after excitation to the anion D 1 excited state, followed by slower (~10 ps) vibrational cooling in the anion D 0 state. Excitation to the higher-lying D 2 state results in a rapid relaxation to the D 1 state, in contrast to direct D 2 -D 0 relaxation previously observed for F 4 TCNQ· - in gas phase. CTCs embedded in polystyrene (PS) matrices are observed to lose their integer charge-transfer character upon evaporation of solvent, as evidenced by changes to electronic and vibrational absorption features associated with F 4 TCNQ· - . This change is attributed to the loss of solvent stabilization of the ion pair formed through the charge-transfer reaction. Ultrafast spectral measurements reveal that the photoresponses of the partial charge-transfer (PCT) species embedded in PS are still highly similar to those of the ICT species and unlike that of neutral F 4 TCNQ, implying the electronic properties of the PCT state are likewise dominated by properties of the reduced acceptor molecule. We conclude that excitation of ICT or PCT states introduces optical losses for photoresponses of doped organic semiconductor materials due to the large anion absorption cross section and its rapid, dissipative deactivation dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗