Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Cavitation pitting and erosion of Al 6061-T6 in mineral oil and water

The authors are currently carrying out a study of the cavitation erosion of different bearing metals and alloys in mineral oils were studied. The variations of weight loss, the pit diameter and depth due to cavitation erosion on Al 6061-T6 in mineral oil and water are presented.

Rao, B. C. S.↗

Mineral identification from orbit - Initial results from the Shuttle multispectral infrared radiometer

The Shuttle multispectral IR radiometer (SMIRR) was designed to obtain surface reflectance data in ten spectral bands in order to evaluate the usefulness of a future imaging system for remote mineral identification. Attention was given to the 2.0-2.4 micron region, which has a wealth of spectral absorption features and appeared to have potential for the identification of CO3- and OH-bearing minerals such as the kaolinite and montmorillonite clays. SMIRR radiances were normalized by using a spectrum for dune sand collected in the Kharga Depression in Egypt. Direct identifications have been made of kaolinite-containing and carbonate material, indicating an exceptional potential for future orbital platform narrowband spectral imaging systems for mineralogical mapping.

Goetz, A. F. H.↗

Heterogeneous shock-induced thermal radiation in minerals

A 500-channel optical imaging intensifying and spectral digital recording system is used for recording the shock-induced radiation emitted from 406 to 821 nm from transparent minerals during the time interval that a shock wave propagates through the sample. The initial results obtained for single crystals of gypsum, calcite and halite in the 30 to 40 GPa (300 to 400 kbar) pressure range reveal grey-body emission spectra corresponding to temperatures in the 3000 to 4000 K range and emissivities ranging from 0.003 to 0.02. With gypsum and calcite, distinctive line spectra are superimposed on the thermal radiation. The observed color temperatures are greater than the Hugoniot temperature by a factor of 2 to 10; this is calculable on the basis of continuum thermodynamics and equation of state models for the shock states achieved in the three minerals. These observed high temperatures are thought to be real. It is concluded that a large number of closed spaced high temperature shear-band regions are being detected immediately behind the shock front.

Kondo, K.-I.↗

The effects of spaceflight on the mineralization of rat incisor dentin

Specific effects of space flight on dentin formation on the lower incisors of male rats were determined. Data were Fourier analyzed to determine the spectra of chemical growth rhythms. It was found that Calcium and P were more concentrated in the newly forming dentin of the Flight rats than in comparable regions of control tissues. There was no significant difference in the mean S-concentration between the two groups, but the pattern of S-distribution in the recently formed dentin from the Flight rats was different from that in the control group. Sulfur fluctuations in flight animals periodically peak above the irregular background fluctuations, but there are no comparable sulfur peaks across the dentin in the control. It is indicated that spaceflight has measurable effects on dentinogenesis, and may also bear on the problem of the regulatory role of proteoglycans in mineralization and the maturation of mineral and matrix moieties in skeletal tissue.

Simmons, D. J.↗

Detection of hidden mineral deposits by airborne spectral analysis of forest canopies

Data from field surveys and biogeochemical tests conducted in Maine, Montana, and Washington strongly correlate with results obtained using high resolution airborne spectroradiometer which detects an anomalous spectral waveform that appears definitely associated with sulfide mineralization. The spectral region most affected by mineral stress is between 550 nm and 750 nm. Spectral variations observed in the field occur on the wings of the red chlorophyll band centered at about 690 nm. The metal-stress-induced variations on the absorption band wing are most successfully resolved in the high spectral resolution field data using a waveform analysis technique. The development of chlorophyll pigments was retarded in greenhouse plants doped with copper and zinc in the laboratory. The lowered chlorophyll production resulted in changes on the wings of the chlorophyll bands of reflectance spectra of the plants. The airborne spectroradiometer system and waveform analysis remains the most sensitive technique for biogeochemical surveys.

Collins, W.↗

High resolution bone mineral densitometry with a gamma camera

A technique by which the regional distribution of bone mineral can be determined in bone samples from small animals is described. The technique employs an Anger camera interfaced to a medical computer. High resolution imaging is possible by producing magnified images of the bone samples. Regional densitometry of femurs from oophorectomised and bone mineral loss.

Leblanc, A.↗

Strength of mineral absorption features in the transmitted component of near-infrared reflected light - First results from RELAB

Bidirectional reflectance measurements are the only type of reflectance data available to the remote observer. For compositional interpretations, data are desired not only for identification of possible mineral components but also for modal abundance. The latter requires detailed information about the strength of absorption features. Using a new laboratory facility, the RELAB, laboratory data in the near infrared are presented that document effects of particle size, mineral mixtures, and viewing geometry for selected materials with well-developed absorption bands. The commonly observed increase in reflectance with decrease in particle size is also observed for absorption bands as well as a related decrease in absorption strength. For small particles in parts of the spectrum of maximum reflectance, however, a minor decrease in reflectance with a decrese in particle size is sometimes observed. Small particles dominate the observed characteristics of particulate surfaces, which contain a range of particle sizes. The mean optical path length (transmission through particles) of reflected radiation measured for a variety of particle sizes has an apparent upper limit of about 2 mm for particles of less than 250 microns. The typical number of particles involved in the optical path is less than 50.

Pieters, C. M.↗

The mineral chemistry and origin of inclusion matrix and meteorite matrix in the Allende CV3 chondrite

The mineralogy and mineral chemistry of the inclusion and meteorite matrices in the Allende CV3 chondrite are described, and the physical and chemical parameters of the conventional equilibrium condensation model of the origin of chondrite meteorites are evaluated. An alternative model of the origin of the mafic constituent of Allende inclusions is presented, on the basis of a new model of chondrule petrogenesis and the physical evolution of the primitive solar nebula. The model shows that the mineral chemistry of the olivine matrix in Allende CV3 seems to preserve a good record of nebular and planetary processes, including: (1) vapor-to-solid condensation under relatively oxidizing nonequilibrium conditions; (2) Fe/Mg equilibration in the meteorite parent body; and (3) recrystallization and incipient melting in the solar nebula.

Kornacki, A. S.↗

Remote sensing as a mineral prospecting technique

Remote sensing and its application as an alternative technique to mineral resource exploration are reviewed. Emphasis is given here to the analysis of the three basic attributes of remote sensing, i.e., spatial attributes related to regional structural mapping, spectral attributes related to rock discrimination and seasonal attributes related to geobotanic anomalies mapping, all of which are employed in mineral exploration. Special emphasis is given to new developments of the Thematic Mapper of the LANDSAT-5, principally with reference to the application of the bands 1.6 and 2.2 microns to map hydrothermally altered rocks and the band of red and blue shift to geobotanical anomalies mapping.

Meneses, P. R.↗

Interpretation of aircraft multispectral scanner images for mapping of alteration with uranium mineralization, Copper Mountain, Wyoming

NS-001 multispectral scanner data (0.45-2.35 micron) combined as principal components were utilized to map distributions of surface oxidation/weathering in Precambrian granitic rocks at Copper Mountain, Wyoming. Intense oxidation is found over granitic outcrops in partly exhumed pediments along the southern margin of the Owl Creek uplift, and along paleodrainages higher in the range. Supergene(?) uranium mineralization in the granites is localized beneath remnant Tertiary sediments covering portions of the pediments. The patterns of mineralization and oxidation are in agreement, but the genetic connections between the two remain in doubt.

Conel, J. E.↗

The influence of temperature on the lubricating effectiveness of MoS2 dispersed in mineral oils

The effects of oil viscosity, base oil temperature, and surface-active agents naturally present in mineral oils on the lubricating effectiveness of MoS2 dispersions under boundary lubrication conditions are investigated. Friction and wear data are obtained from tests conducted under a wide range of oil viscosities and operating temperatures. The dispersion temperature at which the friction dropped below that obtained with the base oils, depended upon the base oil viscosity and the concentration of surface-active agents present in the oil. White oils showed reductions in friction before mineral oils of like viscosity, and lower viscosity oils showed reductions in friction before heavier viscosity oils. The results show that for a given base oil, wear increases as temperature increases, while the wear obtained from a MoS2 dispersion made from the base oil remains approximately constant as temperature is increased.

Rolek, R. J.↗

Effects of simulated weightlessness on bone mineral metabolism

It is pointed out that prolonged space flight, bedrest, and immobilization are three factors which can produce a negative calcium balance, osteopenia, and an inhibition of bone formation. It is not known whether the effects of gravity on bone mineral metabolism are mediated by systemic endocrine factors which affect all bones simultaneously, or by local factors which affect each bone individually. The present investigation has the objective to test the relative importance of local vs. systemic factors in regulating the bone mineral response to conditions simulating weightlessness. Experiments were conducted with male Sprague-Dawley rats. The test conditions made it possible to compare the data from weighted and unweighted bones in the same animal. The obtained findings indicate that a decrease in bone mass relative to control value occurs rapidly under conditions which simulate certain aspects of weightlessness. However, this decrease reaches a plateau after 10 days.

Globus, R. K.↗

Adsorption and condensation of amino acids and nucleotides with soluble mineral salts

The directed synthesis of biopolymers in an abiotic environment is presumably a cyclic sequence of steps which may be realized in a fluctuating environment such as a prebiotic pond undergoing wetting-drying cycles. Soluble mineral salts have been proposed as an essential component of this fluctuating environment. The following sequence may be considered as a most primitive mechanism of information transfer in a fluctuating environment: (1) adsorption of a biomolecule onto a soluable mineral salt surface to act as an adsorbed template; (2) specific adsorption of biomonomers onto the adsorbed template; (3) condensation of the adsorbed biomonomers; and (4) desorption of the elongated oligomer. In this investigation, the salts selected for study were CaSO4.2H2O(gypsum), SrSO4, and several other metal sulfates and chlorides. Adsorption of the monomeric species, gly, 5'AMP 5'GMP, and 5'CMP was investigated. The adsorbed template biopolymers used were Poly-A, Poly-G, Poly-C, and Poly-U. The results of studies involving these experimental participants, the first two steps of the proposed primitive information transfer mechanism, and condensation of amino acids to form oligomers in a fluctuating environment are to be reported.

Orenberg, J.↗

Shock effects on hydrous minerals and implications for carbonaceous meteorites

The effect of shock loading over the pressure range of 29-59 GPa on the shock-recovered specimens of antigorite serpentine, Mg3Si2O5(OH)4, were investigated employing infrared (IR) spectroscopy, thermogravimetric analysis, and optical and scanning electron microscopy. With increasing shock pressure, there was an increase in H2O IR absorption peaks at the expense of OH peaks, while the changes in SiO bond vibration modes were identical to those seen for other, nonhydrous minerals. Thermogravimetric results on vented assembly samples showed linear relationships between the shock pressure and both the length of dehydration interval and the effective activation energy for releasing post-shock structural water. Optical and scanning electron microscopy revealed gas bubbles, which appeared to be injected into zones of partial melting, and vesicular dark veins distributed throughout the shocked samples. It is suggested that shock loading of hydrous minerals would release and redistribute free water in the regoliths of carbonaceous chondrite parent bodies, giving rise to observed hydrous alterations.

Lange, M. A.↗

Effects of temperature on remotely sensed mineral absorption features

The present paper provides the results from a series of laboratory experiments which were conducted to investigate the variable spectral behavior of diagnostic Fe(++) crystal field absorptions in common rock-forming minerals as a function of temperature. The general goal of the study is to refine existing techniques of mineralogic and chemical characterization, based on specific optical behavior which has been measured and correlated in a systematic way. It is pointed out that the presented work, taken together with a number of recent studies, provides new information on the manner in which specific features of mafic minerals combine in rocks and soil spectra, taking into account also variations of identification and subsequent interpretation as a function of planetary surface temperature. The obtained results are directly applicable to interpretation of remotely sensed data for many solar system objects, particularly Mars, asteroids, the moon, earth, and Mercury.

Singer, R. B.↗

Role of minerals in the thermal alteration of organic matter. I - Generation of gases and condensates under dry condition

Pyrolysis experiments conducted at 200 and 300 C on kerogen and bitumen from the Monterey formation and on the Green River Formation kerogen with montmorillonite, illite, and calcite added are described. The pyrolysis products are identified and gas and condensate analyses are performed. A catalytic effect is detected in the pyrolysis of kerogen with montmorillonite; however, illite and calcite display no catalytic activity. The increased production of C1-C6 hydrocarbons and the dominance of branched hydrocarbons in the C4-C6 range reveals a catalytic influence. It is observed that the catalysis of montmorillonite is greater during bitumen pyrolysis than for kerogen, and catalysis with minerals affects the production of CO2. It is concluded that a mineral matrix is important in determining the type and amount of gases and condensates forming from organic matter under thermal stress.

Tannenbaum, E.↗

Steranes and triterpanes generated from kerogen pyrolysis in the absence and presence of minerals

Changes in the degree of isomerization of steranes and triterpanes during kerogen pyrolysis in the absence or presence of minerals are described. Kerogen from a Monterey Formation diatomite core sample was pyrolyzed under reduced pressure at 300 C for 2-1000 hrs in the presence or absence of calcite, illite, and montmorillonite. It is observed that the extent of isomerization of biomakers in C-20 in 14 alpha(H), 17 alpha(H)-steranes, at C-22 in 17 alpha(H), 21 beta(H)-hopanes and of 17 beta(H), 21 beta(H)-hopanes correlates to early diagenetic stages in rock extracts from sedimentary basins, and faster isomerization for steranes and triterpanes in the bitumen then for those in the kerogen structure are detected. The effects of the minerals on the isomerization reactions are examined; calcite inhibits, and illite and montmorillonite catalyze the reactions.

Tannenbaum, E.↗