Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC CORE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Generation and stability of structurally imprinted target skyrmions in magnetic multilayers

In this work, Target Skyrmions (TSks) are extended topological spin textures with a constant chirality where the rotation of the z component of the magnetization is larger than π. TSks have topological charge 1 or 0, if the z component of the magnetization M z goes through a rotation of nπwhere n is an odd or even integer, respectively. TSks with a rotation of the z component of up to 4πhave been imaged via high spatial resolution element-specific X-ray imaging. The TSks were generated by weakly coupling 30 nm thin Permalloy (Ni 80 Fe 20 , PY) disks with a 1 μm diameter to asymmetric (Ir 1 nm/Co 1.5 nm/Pt 1 nm) × 7 multilayers that exhibit Dzyaloshinskii-Moriya interaction. The PY disks stabilize the TSks in the multilayers due to reduced stray field energy and enforced circular symmetry from pinning of domain walls at the edges of the disks. Upon applying external magnetic fields, it is the skyrmion core at the center that ensures stability of the TSk, whereas the collapse of the extended structures in the TSk does not depend on the topological charge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Energetic particle marginal stability profile for HL-2M integrated simulation based on neural network module

Abstract A critical gradient model is employed to develop a module of energetic particle (EP) marginal stability profiles in OMFIT integrated simulations for studying EP transport. Currently, each iteration of transport evolution is approximately 10 min in the integrated simulation, whereas, the EP marginal stability profile, which serves as an input in the integrated simulation could take much longer; the reason being a combination of the TGLFEP and EPtran codes is employed in our previous investigation. To reduce the simulation time, the critical gradient is predicted by a neural network instead of the TGLFEP code, and the EPtran code is revised with parallel computing, so that the running time of this module can be controlled to within 5 min. The predictions are in good agreement with previous approaches. The integrated simulation of HL-2M with Alfven eigenmodes transported by neutral beam EP profiles indicates that EP transport reduces the total pressure and current as expected, but could also under some conditions raise the safety factor in the core, which is favorable for reversed magnetic shear and high-performance plasmas.

Physics↗
DOE OSTI2022

Fast wave interferometer for ion density measurement on DIII-D

=A fast wave interferometer (FWI), which can measure ion mass density, has been developed on DIII-D for its use on future fusion reactors, as well as for the study of ion behavior in current plasma devices. The frequency of the fast waves used for the FWI is around 60 MHz, and require antennas and coaxial cables or waveguides, which, unlike traditional mirror-based optical interferometers, are less susceptible to neutron/gamma-ray radiation and are relatively immune to impurity deposition and erosion as well as alignment issues. The bulk ion density evaluated using FWI show good agreement with that derived from CO 2 interferometry within about 15%. When the ion mass density measurement by FWI is combined with an electron density measurement from CO 2 interferometry, Z eff measurements are also enabled and are in agreement with those from visible Bremsstrahlung measurements. Additionally, large-bandwidth FWI measurements clearly resolve 10–100 kHz coherent modes and demonstrate its potential as a core fluctuation diagnostic, sensitive to both magnetic and ion density perturbations.

Instruments & Instrumentation↗
DOE OSTI2021

One-directional polarization transport in electron/nuclear spin chains with loss and gain

Understanding the joint dynamics of electron and nuclear spins is central to core concepts in solid-state magnetic resonance such as spin-lattice relaxation and dynamic nuclear polarization, but a generalization that capitalizes on competing polarization loss and gain channels is still lacking. Here, we study theoretically the non-Hermitian dynamics of hybrid electron/nuclear spin systems in the simultaneous presence of electron spin pumping and spin-lattice relaxation. Focusing on periodic, one-dimensional chains, we find that, by adjusting the electron spin pumping to a critical level, it is possible to steer the flow of nuclear polarization to create site-dependent distributions where either end of the array polarizes in opposite ways, irrespective of the initial state. By contrast, we show that ring-like patterns—where the limit nuclear polarization is uniform—exhibit a non-decaying, externally driven nuclear spin current. Interestingly, cyclic magnetic field modulation can render these processes largely robust to defects in the chain, a response featuring some interesting similarities—and differences—with recent findings in other non-Hermitian physical platforms.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multi-Core Microcontroller Hardware In the Loop System for Electric Machine Control

Hardware in the Loop (HIL) is a simulation technique used to reduce the software development cycle and test control systems in a non-destructive environment. This work describes a cost effective HIL simulator on a dual core microcontroller in which one core acts as a controller and the other emulates the system under control. The emulator runs one step per Pulse Width Modulation (PWM) period in real time. To handle the computational burden and prioritize execution of simulation and control tasks, an interrupt-based software architecture with task prioritization has been developed. As a demonstration, the HIL has been implemented on a Texas Instruments TMS320F28379D dual core microcontroller, which emulates a Permanent Magnet Synchronous Machine (PMSM) with resolver feedback. Hardware peripherals are developed and tested concurrently with the control system, providing higher confidence in the software. By using the peripherals in the HIL development, the controller exercises either the HIL emulation or a pin compatible PMSM testbench. To quantify performance and validate the processor based emulator, the HIL results are compared to the preexisting testbench for accuracy benchmarking at no-load and under load for a range of operating points.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Doppler-Free Saturation Spectroscopy (DFSS) for Magnetic and Electric Field Measurements in an FRC plasma

The Cooperative Research and Development Agreement (CRADA) between Oak Ridge National Laboratory (ORNL) and TAE Technologies (TAE) focused on a feasibility study of Doppler-free saturation spectroscopy (DFSS) as a diagnostic strategy to measure the internal magnetic and electric fields of TAE’s C-2W field-reversed configuration (FRC) fusion device. Non-perturbative measurements of magnetic and electric fields in the core of FRCs can provide critical information needed to constrain equilibrium models and for the continued advancement of the fusion research program at TAE. DFSS is a well-established, laser-based absorption spectroscopy technique used to suppress inhomogeneous (Doppler) broadening linewidths and reveal Zeeman/Stark split hyperfine structures of target emission lines. The collaboration involved the use of ORNL’s suite of experimentally validated quantum mechanical modelling codes to simulate theoretical atomic spectra for a variety of machine parameters and laser beam configurations. TAE’s expertise was heavily used to provide measurements/models of the required machine parameters needed as inputs to the simulations. Results of an all-encompassing error analysis demonstrate the favourable capabilities of the diagnostic and provided invaluable insights as to how DFSS can be best used to accurately measure internal B/E-fields in C-2W.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Resolving the Inner Parsec of the Blazar J1924–2914 with the Event Horizon Telescope

The blazar J1924–2914 is a primary Event Horizon Telescope (EHT) calibrator for the Galactic center’s black hole Sagittarius A*. Here we present the first total and linearly polarized intensity images of this source obtained with the unprecedented 20 μas resolution of the EHT. J1924–2914 is a very compact flat-spectrum radio source with strong optical variability and polarization. In April 2017 the source was observed quasi-simultaneously with the EHT (April 5–11), the Global Millimeter VLBI Array (April 3), and the Very Long Baseline Array (April 28), giving a novel view of the source at four observing frequencies, 230, 86, 8.7, and 2.3 GHz. These observations probe jet properties from the subparsec to 100 pc scales. We combine the multifrequency images of J1924–2914 to study the source morphology. We find that the jet exhibits a characteristic bending, with a gradual clockwise rotation of the jet projected position angle of about 90° between 2.3 and 230 GHz. Linearly polarized intensity images of J1924–2914 with the extremely fine resolution of the EHT provide evidence for ordered toroidal magnetic fields in the blazar compact core.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1970

Controlled current inductors

Magnetic permeability and shape of special core inserts are varied to produce desired changes in saturation characteristics of current dependent inductor, thus improving its inductance-to-current properties. Materials and saturation levels of the core pieces are selected to permit a wide variety of relationships between inductance and current.

Thaler, S.↗
NASA NTRS1981

Low current linearization of magnetic amplifier for dc transducer

A magnetic amplifier having two saturable reactor cores with a separate excitation winding on each connected in series opposition, a common control winding, and a common output winding, is adapted for use as a low level signal transducer. The separate excitation windings are excited in push-pull mode through a center tapped transformer, and at least one diode is included in series with a load resistor connected to the output winding. A resistor in series with the output winding and load resistor is connected between the center tap of the excitation transformer and the connection between the two excitation windings of the saturable cores. This series resistor provides a return current path for the output winding and allows the excitation windings of the saturable cores to operate as primary windings of transformers.

Nagano, S.↗
NASA NTRS1982

Sunspot time series - Spectrum from square law modulation of the Hale cycle

The spectrum of the sunspot index can be qualitatively accounted for by a very simple time series model which the Hale 22 year cycle dominates; the series is amplitude modulated at the 90 year Gleissberg period with an index of 25%. The square of the modulated Hale cycle reproduces all of the spectral lines of the Zurich sunspot index spectrum, provided that a small offset is included in the Hale carrier. Without this, evidence of the 22 year periodicity disappears. The squaring explains the dominance of the 11 year cycle which is an artifact of the modulation as is the 45 year line. The offset suggests a small relict magnetic field in the sun's core. Lastly Gilliland (1981) finds a radial eigenmode in the sun with period of 76 + or - 8 years suggestive of a physical basis for the Gleissberg modulation.

Sonett, C. P.↗
NASA NTRS1983

Is the sunspot spectrum really so complicated?

The spectrum of the sunspot index can be qualitatively accounted for by a very simple model which the Hale 22-yr cycle dominates. The Hale cycle is amplitude modulated at the 90-yr Gleissberg period with an index of 25 percent. The square of the modulated Hale cycle reproduces all of the spectral lines of the Zurich-sunspot-index spectrum, between 90- and 8.9-yr periods, provided that a small offset is included in the Hale carrier. Without this, evidence of the 22-yr periodicity disappears because of the squaring, thus explaining the very strong 11-yr cycle which is an artifact of the modulation, as is the 45-yr line. The offset suggests a small relict magnetic field in the sun's core.

Sonett, C. P.↗
NASA NTRS2000

Estimating the Crustal Power Spectrum From Vector Magsat Data: Crustal Power Spectrum

The Earth's magnetic field can be subdivided into core and crustal components and we seek to characterize the crustal part through its spatial power spectrum (R(sub l)). We process vector Magsat data to isolate the crustal field and then invert power spectral densities of flight-local components along-track for R(sub l) following O'Brien et al. [1999]. Our model (LPPC) is accurate up to approximately degree 45 (lambda=900 km) - this is the resolution limit of our data and suggests that global crustal anomaly maps constructed from vector Magsat data should not contain features with wavelengths less than 900 km. We find continental power spectra to be greater than oceanic ones and attribute this to the relative thicknesses of continental and oceanic crust.

Lowe, David A. J.↗
NASA NTRS2016

Phase Equilibria of a S- and C-Poor Lunar Core

The composition of the lunar core can have a large impact on its thermal evolution, possible early dynamo creation, and physical state. Geochemical measurements have placed better constraints on the S and C content of the lunar mantle. In this study we have carried out phase equilibrium studies of geochemically plausible S- and C-poor lunar core compositions in the Fe-Ni-S-C system, and apply them to the early history of the Moon. We chose two bulk core compositions, with differing S and C content based on geochemical analyses of S and C trapped melts in Apollo samples, and on the partitioning of S and C between metal and silicate. This approach allowed calculation of core S and C contents - 90% Fe, 9% Ni, 0.5% C, and 0.375% S by weight; a second composition contained 1% each of S and C. Experiments were carried out from 1473K to 1973K and 1 GPa to 5 GPa, in piston cylinder and multi- anvil apparatuses. Combination of the thermal model of with our results, shows that a solid inner core (and therefore initiation of a dynamo) may have been possible in the earliest history of the Moon (approximately 4.2 Ga ago), in agreement with. Thus a volatile poor lunar core may explain the thermal and magnetic history of the Moon.

Righter, K.↗
DOE OSTI2012

Substantially parallel flux uncluttered rotor machines

A permanent magnet-less and brushless synchronous system includes a stator that generates a magnetic rotating field when sourced by polyphase alternating currents. An uncluttered rotor is positioned within the magnetic rotating field and is spaced apart from the stator. An excitation core is spaced apart from the stator and the uncluttered rotor and magnetically couples the uncluttered rotor. The brushless excitation source generates a magnet torque by inducing magnetic poles near an outer peripheral surface of the uncluttered rotor, and the stator currents also generate a reluctance torque by a reaction of the difference between the direct and quadrature magnetic paths of the uncluttered rotor. The system can be used either as a motor or a generator

42 ENGINEERING↗
NASA NTRS1998

Network Coronal Bright Points: Coronal Heating Concentrations Found in the Solar Magnetic Network

We examine the magnetic origins of coronal heating in quiet regions by combining SOHO/EIT Fe xii coronal images and Kitt Peak magnetograms. Spatial filtering of the coronal images shows a network of enhanced structures on the scale of the magnetic network in quiet regions. Superposition of the filtered coronal images on maps of the magnetic network extracted from the magnetograms shows that the coronal network does indeed trace and stem from the magnetic network. Network coronal bright points, the brightest features in the network lanes, are found to have a highly significant coincidence with polarity dividing lines (neutral lines) in the network and are often at the feet of enhanced coronal structures that stem from the network and reach out over the cell interiors. These results indicate that, similar to the close linkage of neutral-line core fields with coronal heating in active regions (shown in previous work), low-lying core fields encasing neutral lines in the magnetic network often drive noticeable coronal heating both within themselves (the network coronal bright points) and on more extended field lines rooted around them. This behavior favors the possibility that active core fields in the network are the main drivers of the heating of the bulk of the quiet corona, on scales much larger than the network lanes and cells.

Falconer, D. A.↗
NASA NTRS2008

Three-Dimensional Signatures of Intermittent Magnetic Reconnection in Global Simulations of Dayside Magnetosphere Dynamics

We performed high resolution global MHD simulations of THEMIS dayside crossings events in May -June 2007. We found that magnetopause surface is not in steady-state even during extended periods of steady solar wind conditions. The so-called tilted reconnection lines become unstable due to formation of pressure bubbles, strong core field flux tubes, vortices, and traveling magnetic field cavities. The topology of FTEs differ from that in two dimension cartoons representing obliquely oriented quasi-2D flux rope. The structure of FTE is changing at spatial scales of 1 -2 Re. Closely located space probes can observe completely different signatures. Branches of bent flux rope can move in opposite directions. THEMIS and Cluster observations are consistent with signatures predicted by simulations.

Kuznetsova, M.M.↗
DOE OSTI2018

Metal Amorphous Nanocomposite Soft Magnetic Material-Enabled High Power Density, Rare Earth Free Rotational Machines [Metal Amorphous Nanocomposite (MANC) Soft Magnetic Material (SMM) Enabled High Power Density, Rare Earth Free Rotational Machines]

Metal amorphous nanocomposites (MANCs) are promising soft magnetic materials (SMMs) for power electronic applications offering low power loss at high frequency and maintaining a relatively high flux density. While applications in certain motor designs have been recently modeled, their widespread application awaits scaled manufacturing of MANC materials and proliferation of new higher speed motor designs. A hybrid motor design based on permanent magnets and doubly salient stator and rotor is reported here to develop a compact (a factor of 10 smaller than currently possible in Si steels), high-speed (>1 kHz, electrical), high-power (>2.5 kW) motor by incorporating low loss (<10 W/kg at 1 kHz) MANCs such as recently reported Fe-Ni-based alloys. A feature of this motor design is flux focusing from the permanent magnet allowing use of lower energy permanent magnet chosen from among non-rare earth containing compositions and attractive due to constraints posed by rare earth criticality. A 2-D finite element analysis model reported here indicates that a 2.5 kW hybrid motor may be built with a permanent magnet with a 0.4 T remanence at a rotor speed of 6000 rpm. At a magnetic switching frequency of 1.4 kHz, the core loss may be limited to <3 W by selecting an appropriate MANC SMM. The projected efficiency exceeds 96% not including power loss in the controller. Under full load conditions, the flux density distributions for the SMM stay predominantly <1.3 T, the saturation magnetization of optimized FeNi-based MANC alloys. As a result, the maximum demagnetizing field in the permanent magnet is less than 2.2 × 10 5 A/m sustainable, for example, with a high-grade hard ferrite magnet.

42 ENGINEERING↗